OK, I've seen this twice (so it isn't complete death) but wanted to see if anyone else had any ideas. I've done a complete shut down (power button for 8 sec) and then couldn't get it to turn back on. When this is happening, I can plug it in and see the green charging light. Holding the power button then for 8 sec will make the green light go out. Pushing it again, light comes on. So the button is working... If i leave it for awhile, the nook will then reboot and appear to work normally...
Rooted, stock, 2.0.5
dbh369 said:
OK, I've seen this twice (so it isn't complete death) but wanted to see if anyone else had any ideas. I've done a complete shut down (power button for 8 sec) and then couldn't get it to turn back on. When this is happening, I can plug it in and see the green charging light. Holding the power button then for 8 sec will make the green light go out. Pushing it again, light comes on. So the button is working... If i leave it for awhile, the nook will then reboot and appear to work normally...
Rooted, stock, 2.0.5
Click to expand...
Click to collapse
If your device battery level is below 10 percent it will not turn on until it charges up to at leat 15 percent level. Then it will turn on.
hwong96 said:
If your device battery level is below 10 percent it will not turn on until it charges up to at leat 15 percent level. Then it will turn on.
Click to expand...
Click to collapse
I think that is the mechanism stopping it, but it is malfunctioning, I'm at about 90% this last time...
Is there ther equivalent of 'battery stats' somewhere that can be affecting this? or is this hardware? It should be turning on fine at 80-90% but no. However, plug in for 10 mins and it works fine. So that seems to be the problem.
dbh369 said:
I think that is the mechanism stopping it, but it is malfunctioning, I'm at about 90% this last time...
Is there ther equivalent of 'battery stats' somewhere that can be affecting this? or is this hardware? It should be turning on fine at 80-90% but no. However, plug in for 10 mins and it works fine. So that seems to be the problem.
Click to expand...
Click to collapse
OK, this is getting worse, I'm now at 100% charge and it happened. Weirder still, if I leave it plugged in for awhile, it will reboot on its own.
I have not had this happen on my HD but something similar has happened on my HD+. It seems to be related to whether an SD is plugged in. I have to take the SD out, press power off for a while, then release and momentarily press power again.
I know on the Nook Colors, they would not turn on unless it could find the boot files to boot from. So if a user formatted his internal boot partition by mistake, it would not turn on unless a bootable SD with active boot files was in the slot. Something akin to this may be happening, only in reverse.
Sent from my Nook HD+ Running CM10 on SD
Huh- will try removing the sd next time- it is a nd plus. Of course then how sui I boot to sd?
Sent from my BNTV600 using xda app-developers app
dbh369 said:
Huh- will try removing the sd next time- it is a nd plus. Of course then how sui I boot to sd?
Sent from my BNTV600 using xda app-developers app
Click to expand...
Click to collapse
Once I got it booting, then I could put the SD back in and boot to it.
(And your thread title says HD).
Sent from my Nook HD+ Running CM10 on SD
leapinlar said:
(And your thread title says HD).
Sent from my Nook HD+ Running CM10 on SD
Click to expand...
Click to collapse
Fixed
Sent from my BNTV600 using xda app-developers app
leapinlar said:
Once I got it booting, then I could put the SD back in and boot to it.
Sent from my Nook HD+ Running CM10 on SD
Click to expand...
Click to collapse
OK, this seems to have worked. I tried to change the partition of my CWM SD card using EaseUS, but that seemed to make it no bootable, and removing it does seem to have worked. Now I can boot a new reimaged CWM card.
Thanks!
Good to hear that your nook is working again.
It seems i am having a similar issue, only a little more severe.
I described it here: http://forum.xda-developers.com/showthread.php?t=2088893
leapinlar said:
It seems to be related to whether an SD is plugged in. I have to take the SD out, press power off for a while, then release and momentarily press power again.
Click to expand...
Click to collapse
Something similar happened to my HD+ running the 12/31 build of verygreen's CM. In my case, I think it was precipitated by the battery draining too far first, though. Very weird and a little spooky, but glad there's a workaround.
Wow, this is dumb. I can't believe a badly-formatted SD would cause it to look like it's broken. Put a message up or something. Thanks for the help, thought something was really wrong!
Nook HD Plus won't charge
I've seen dozens of reports of this. The symptoms are all about the same.
The unit drains the battery, even if you plug it in, it still drains, so although the charger and cable are fine, something inside the Nook doesn't get the memo.
It drains down to the point where it turns off. Then every time you plug it in, the light goes green, then amber, then off. The battery never charges.
I tried taking the unit apart and disconnecting the battery overnight, but that didn't seem to help. I suspect something in the software gets in a "vapor lock" where a dead battery condition is mistaken for a fully-charged battery condition. I only paid $109 for it refurbished, so it isn't worth another $60 for a new battery, and I don't think there is anything wrong with this battery.
If I knew the pinouts of the battery connector, I might try charging it without going through the Nook. Perhaps if it was actually fully charged, the "vapor" would realign.
Does anyone have another idea, apart from the nitwit stuff Barnes & Noble allows on its forums, like "push the cable in harder" or try another adapter. I notice they aren't interested in entertaining any idea that their firmware is at fault.
It will not charge when plugged in if OTG USB is activated (e.g., to connect a USB keyboard). That's happened to me a few times using unofficial VG CM versions where the USB state can be changed inadvertently from a pull down drawer. If the USB isn't toggled back to normal in time to recharge the battery before its completely discharged, it might not be revivable.
Sent from HD+ MAG2GA CM 11 from SD
dbh369 said:
OK, I've seen this twice (so it isn't complete death) but wanted to see if anyone else had any ideas. I've done a complete shut down (power button for 8 sec) and then couldn't get it to turn back on. When this is happening, I can plug it in and see the green charging light. Holding the power button then for 8 sec will make the green light go out. Pushing it again, light comes on. So the button is working... If i leave it for awhile, the nook will then reboot and appear to work normally...
Rooted, stock, 2.0.5
Click to expand...
Click to collapse
I've the same problem, except even if I leave it a while, it doesn't boot or even appear to start. Is there something wrong with the battery or display? It was working perfectly fine until suddenly the screen froze and I had to do a complete shut down.
I cant get my nook to turn on. I try charging it and a little green light comes on at the bottom and stays on for about 3 seconds and then a orange light comes on for about 3 seconds and then it shuts off. I dont know if the light is supposed to stay on while it is charging. Sometimes it comes up with a dead battery sign but it just goes right back off.
TiffanyLandis95 said:
I cant get my nook to turn on. I try charging it and a little green light comes on at the bottom and stays on for about 3 seconds and then a orange light comes on for about 3 seconds and then it shuts off. I dont know if the light is supposed to stay on while it is charging. Sometimes it comes up with a dead battery sign but it just goes right back off.
Click to expand...
Click to collapse
Have you tried charging it with its wall-charger for an extended period (8+ hours)?
I have a new Motorola Atrix HD. I was using it and the screen went black. i hit the power button to unlock but nothing happened. i plugged it in but nothing happened. i took the back off to see if the battery was disconnected. I didn't know the battery was different than other phones and ripped the power cord connecting the battery to the phone when i took it out. lesson learned. Ordered a new battery and installed correctly. phone won't turn on. The green charge light blinks when i plug it into the wall and then stays on for about 20 seconds and then the phone tries to turn on but while the motorola icon is illuminated, it cuts back out and repeats the cycle. I left it plugged in for a couple hours and still the same thing. i tried holding in power and volume buttons for the boot screen. if i do that just as the phone attempts to turn on i can get the screen up and scroll the list of boot options with the power buttons but i can't select any of them and the phone cuts out after the same amount of time. Everytime. When i plug it into my laptop, the light blinks on and then stays on like with the wall, but the phone doesn't attempt to power up. Please, any help would be greatly appreciated. i have read a lot of forums where the battery was acting up because of the chargers people were using. The difference between my situation and those of the people i read about is that my boot screen cuts out and cannot be used. This all happened 2 days after my exchange period ended and because i took the back off myself, best buy won't have anything to do with me so i'm on my own and cannot afford another phone right now. Thanks in advance for your time and concern.
katlic said:
I have a new Motorola Atrix HD. I was using it and the screen went black. i hit the power button to unlock but nothing happened. i plugged it in but nothing happened. i took the back off to see if the battery was disconnected. I didn't know the battery was different than other phones and ripped the power cord connecting the battery to the phone when i took it out. lesson learned. Ordered a new battery and installed correctly. phone won't turn on. The green charge light blinks when i plug it into the wall and then stays on for about 20 seconds and then the phone tries to turn on but while the motorola icon is illuminated, it cuts back out and repeats the cycle. I left it plugged in for a couple hours and still the same thing. i tried holding in power and volume buttons for the boot screen. if i do that just as the phone attempts to turn on i can get the screen up and scroll the list of boot options with the power buttons but i can't select any of them and the phone cuts out after the same amount of time. Everytime. When i plug it into my laptop, the light blinks on and then stays on like with the wall, but the phone doesn't attempt to power up. Please, any help would be greatly appreciated. i have read a lot of forums where the battery was acting up because of the chargers people were using. The difference between my situation and those of the people i read about is that my boot screen cuts out and cannot be used. This all happened 2 days after my exchange period ended and because i took the back off myself, best buy won't have anything to do with me so i'm on my own and cannot afford another phone right now. Thanks in advance for your time and concern.
Click to expand...
Click to collapse
Is it possible that the that connection between the power cord and the phone itself is loose or damaged? I'm just guessing here as I have never opened up the back of my phone.
I would check your battery terminals then leave it to charge if it does. You could also try a factory cable. Another thing would be to try fastboot while connected to your laptop and see if it stays on, and if it does, try reflashing all partitions.
Sent from my MB886 using xda premium
Battery on my nook hd+ wont charge I am using stock system and every time I try to charge it , indicator lights turns red for a few sec and then goes green immediately.
how to solve this once for all? I have tried to unplug and plug back in for many times until the light does'nt change in color..is there a better way!!!!!!
i have the same problem,
I've seen similar behavior. While plugged in, hold the power button down 10 seconds. That's will affirmatively turn it off. Wait a few minutes then try turning on the nook, you will have to hold the power button for a couple of seconds to get it to boot. If your battery is very low, you may have to let it charge for awhile first. Just keep trying periodically and it should come back on.
Sent from my BN NookHD+ on Carbon 4.3 using xda app-developers app
My nook hd plus seems to be bricked.
My tablet is unable to power on, and even when connected to the USB charger it only have the green light and it does not turn orange even after a day of charging.
It does not seems to be a dead battery as I had charged it externally.
The tablet would become hot when I reconnect my battery to the tablet.
My tablet might had bricked as I tried to speed by installing ram manager, and my tablet was stuck when it was booting up.
After switching my tablet off, it is unable to be turn on.
What can I do to make it boot?
Green is fully charged and orange is when charging so it will not turn orange as long as it is plugged in. Try holding the power button 30 seconds wait 10 seconds and then hold it for 3 more does it turn on then?
Sent from my SPH-L900 using XDA Free mobile app
This is a long shot. Try holding the power and "n" buttons for three to five minutes. If/when you see the backlight come on, continue to hold both buttons until the backlight goes off again. Then try to power it on normally by pressing just the power switch. What this is supposed to do is trigger the watchdog timer.
I've read through about 20 threads about similar issues, but I can not find any way to solve my problem.
My Nook has cyanogenmod installed on it (i think version 10, but I don't remember). I had installed it a long time ago, and the nook was working perfectly, never had any problems with it.
Well, I had it put away for several months without using it, and now it won't turn on anymore. I left it charging overnight, using the official wall charger that came with it.
When I push the power button, the screen will come on and show the battery picture for a few seconds, and the led near the charging port will change colors between orange and green.
I have tried pressing every combination of buttons, and holding them for different lengths of time, including upwards of 30 seconds, probably about a hundred times. I even followed advice to hold the power and n buttons down for a full 5 minutes. Nothing.
Is there ANYTHING else I could possibly try here, or is this thing dead?
You can remove the battery and recharge it with an external charger. Then reinstall it. Don't let the battery become fully depleted to avoid need for the external charger.
Sent from my BN NookHD+ using Tapatalk
It happens to some of my HD+ when the battery drained ...
Just plug in the charger awhile ... then hold "power" for a few secs while holding the "Home" key (upside down U) ...