[Q] Can I recover i9000 using Clockworkmod? - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi,
I have a Galaxy S i9000 which fails to boot - it just between the Galaxy S logo and a blank screen every few seconds.
I can get into both Download mode and recover mode. Some time ago I rooted this phone and installed Gingerbread so I could unlock it, and it looks like I also installed ClockworkMod Recovery v3.0.0.5 , that's what comes up when I boot into recovery mode.
Unfortunately I don't have any saved backups that I can attempt to restore from.
Is it possible that I can load something onto the sdcard using a PC and then use the 'apply update from sdcard' or 'install zip from sdcard' option to get the phone back to life? If someone can point me to some instructions to read, that would be very helpful.

Hi,
when you can get into CWM-Recovery you can push ZIPs etc. to your phone ...
In the CWM-Recovery you have to mount the internal SD...that should be all i think...
six gun pete said:
Hi,
I have a Galaxy S i9000 which fails to boot - it just between the Galaxy S logo and a blank screen every few seconds.
I can get into both Download mode and recover mode. Some time ago I rooted this phone and installed Gingerbread so I could unlock it, and it looks like I also installed ClockworkMod Recovery v3.0.0.5 , that's what comes up when I boot into recovery mode.
Unfortunately I don't have any saved backups that I can attempt to restore from.
Is it possible that I can load something onto the sdcard using a PC and then use the 'apply update from sdcard' or 'install zip from sdcard' option to get the phone back to life? If someone can point me to some instructions to read, that would be very helpful.
Click to expand...
Click to collapse

six gun pete said:
Is it possible that I can load something onto the sdcard using a PC and then use the 'apply update from sdcard' or 'install zip from sdcard' option to get the phone back to life? If someone can point me to some instructions to read, that would be very helpful.
Click to expand...
Click to collapse
Look here on how to use CWM and here on how to get out of bootloop
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks
Its easier to give "Feedback" in this manner than make an additional post.​

six gun pete said:
Hi,
Unfortunately I don't have any saved backups that I can attempt to restore from.
Click to expand...
Click to collapse
you cant do anything if dont have a backup.
only reflash by odin for solve this

xsenman said:
Look here on how to use CWM and here on how to get out of bootloop
Click to expand...
Click to collapse
Thanks.
I tried to download the version of Odin and the ROM from that first link, but it seems to be impossible without agreeing to install a whole bunch of malware/crapware such as iLivid, Torch and a ton of worthless browser extensions.
Is it possible to get this stuff from somewhere else which isn't quite so intrusive?
Kind regards,
Pete

When you try the first link of xsenman in the thread you can find the version for odin to download i think without downloading any malware and so on ...
six gun pete said:
Thanks.
I tried to download the version of Odin and the ROM from that first link, but it seems to be impossible without agreeing to install a whole bunch of malware/crapware such as iLivid, Torch and a ton of worthless browser extensions.
Is it possible to get this stuff from somewhere else which isn't quite so intrusive?
Kind regards,
Pete
Click to expand...
Click to collapse

six gun pete said:
seems to be impossible without agreeing to install a whole bunch of malware/crapware such as iLivid, Torch and a ton of worthless browser extensions.
Click to expand...
Click to collapse
the trick is to click only the free download button again and again till your download begins, you will never be able to download, if you click the other download buttons (they have added all this buttons lately), as free upload sites like this purposely have them to confuse downloaders and take them to all sorts of crapware. Not that I like it myself, but this site allows above 100MB download at one go, compare to media fire which needs to be split up as such uploaded to it. like I said when I uploaded it a year ago, it never had this issues.
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks
Its easier to give "Feedback" in this manner than make an additional post.​

freakymod2120 said:
When you try the first link of xsenman in the thread you can find the version for odin to download i think without downloading any malware and so on ...
Click to expand...
Click to collapse
Thanks Freaky, I did manage to get Odin OK but was struggling with the ROMs.
xsenman said:
the trick is to click only the free download button again and again till your download begins, you will never be able to download , they have added all this buttons lately, if you click the other download buttons, as free upload sites like this purposely have them to confuse downloaders and take them to all sorts of crapware. Not that I like it myself, but this site allows above 100MB download at one go, compare to media fire which needs to be split up.
Click to expand...
Click to collapse
It certainly confused me, so it worked
Thanks for your help with this. The solution I found was to download a cyanogen 10.1.3 zip file onto the Micro SD card via my PC, put that into the phone, do a recovery install using 'select zip file' from external_sd .
That allowed me to update the CWM installation, then re-run the installation and boot to the boot loader, so I at least have a working phone. Not sure whether I can live with cyanogenmod, but at least if anyone else searching finds this thread they'll see how it can be resolved without Odin or stock ROMS if CWM is present.
Thanks everyone for your help.

Great. Whne you "can live with CM" you can get it on with CM 10.2 actually as nightly-builds but for me it seems to be very stable ...:good::angel:
six gun pete said:
Thanks Freaky, I did manage to get Odin OK but was struggling with the ROMs.
It certainly confused me, so it worked
Thanks for your help with this. The solution I found was to download a cyanogen 10.1.3 zip file onto the Micro SD card via my PC, put that into the phone, do a recovery install using 'select zip file' from external_sd .
That allowed me to update the CWM installation, then re-run the installation and boot to the boot loader, so I at least have a working phone. Not sure whether I can live with cyanogenmod, but at least if anyone else searching finds this thread they'll see how it can be resolved without Odin or stock ROMS if CWM is present.
Thanks everyone for your help.
Click to expand...
Click to collapse

Related

samsung galaxy s M190S Hoppin

Hi everyone. I have a galaxy s M190S made by ANYCALL. I am in a great trouble. I tried to flash clockworkmod recovery via odin and i just bricked my phone. Now it always power on in recovery mode showing some error just like CANNOT READ FROM /DBDATA etc. Also I am unable to do a factory reset. I cannot get into odin mode through three keys combination it shows red letter error instead of ODIN MODE DOWNLOADING. Kindly give me some pieces of advice so that i can recover my phone.
saim4x said:
Hi everyone. I have a galaxy s M190S made by ANYCALL. I am in a great trouble. I tried to flash clockworkmod recovery via odin and i just bricked my phone. Now it always power on in recovery mode showing some error just like CANNOT READ FROM /DBDATA etc. Also I am unable to do a factory reset. I cannot get into odin mode through three keys combination it shows red letter error instead of ODIN MODE DOWNLOADING. Kindly give me some pieces of advice so that i can recover my phone.
Click to expand...
Click to collapse
1) Pull out Battery for a few min, and reinsert and try for download mode
2) Download M190S tegrak kernel http://pspmaster.tistory.com/attachment/[email protected], will give you recovery as well from here
3) Download the latest firmware from here http://pspmaster.tistory.com/78
you can try and flash the kernel, to see if it boots..if it does you can download tegrak kernel app from play store to use for rooting and lag fix
IF fails, Flash the M190S ROM and your problem should be solved
for more info on tegrak click my link on M110S and you have many how to articles about Korean versions
xsenman said:
1) Pull out Battery for a few min, and reinsert and try for download mode
2) Download M190S tegrak kernel http://pspmaster.tistory.com/attachment/[email protected], will give you recovery as well from here
3) Download the latest firmware from here http://pspmaster.tistory.com/78
you can try and flash the kernel, to see if it boots..if it does you can download tegrak kernel app from play store to use for rooting and lag fix
IF fails, Flash the M190S ROM and your problem should be solved
for more info on tegrak click my link on M110S and you have many how to articles about Korean versions
Click to expand...
Click to collapse
hiii feelinggg desrted because i have also bricked my pone............so heres how it all started first off all i flashed tegrak kerenl aftrer that the phone boooted into the tegrak kernell menu[the thing that shows up] and from there i could not booot into system etc.....then i flashed the recovery attachmnet from your thread after that the splash screeb that showed the model galaxy hopppin changed and now it only shoes samsung any call.........plus i can also get into download mode by pressing home and powwer .......and also i flashed about 3 firmwares and all of them rsult in aa recovery boootloop........now what should i do .......plzzzz help
43jade1 said:
hiii feelinggg desrted because i have also bricked my pone............so heres how it all started first off all i flashed tegrak kerenl aftrer that the phone boooted into the tegrak kernell menu[the thing that shows up] and from there i could not booot into system etc.....then i flashed the recovery attachmnet from your thread after that the splash screeb that showed the model galaxy hopppin changed and now it only shoes samsung any call.........plus i can also get into download mode by pressing home and powwer .......and also i flashed about 3 firmwares and all of them rsult in aa recovery boootloop........now what should i do .......plzzzz help
Click to expand...
Click to collapse
Follow this guide and flash stock ROM with PIT file
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks
Its easier to give "Feedback" in this manner than make an additional post.​
xsenman said:
Follow this guide and flash stock ROM with PIT file
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks
Its easier to give "Feedback" in this manner than make an additional post.​
Click to expand...
Click to collapse
yup already tried that doing that also results into stock recovery wih a msg showing verifying internal mmc block .... and then again stock recovery shows up with option to reboot factory reset and cache partition tried all three of them and still resulted in recovery ......now what????????
43jade1 said:
yup already tried that doing that also results into stock recovery wih a msg showing verifying internal mmc block .... and then again stock recovery shows up with option to reboot factory reset and cache partition tried all three of them and still resulted in recovery ......now what????????
Click to expand...
Click to collapse
This thread is linked to this thread
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks
Its easier to give "Feedback" in this manner than make an additional post.​

Question about unbricking

I was trying to instal CM rom on Galaxy S using clockworkrecovery. Unfortunately, after installation and reboot, the phone gets stuck on CyanogenMod boot screen, then reboots again.
I understand I will need to get USB jig (no key combination, or usb cable trick worked).
Does that mean I will lose all my data on the internal SD card, like photos and TitanumBackup files?
impactor said:
I was trying to instal CM rom on Galaxy S using clockworkrecovery. Unfortunately, after installation and reboot, the phone gets stuck on CyanogenMod boot screen, then reboots again.
I understand I will need to get USB jig (no key combination, or usb cable trick worked).
Does that mean I will lose all my data on the internal SD card, like photos and TitanumBackup files?
Click to expand...
Click to collapse
You probably didn't install the CM exactly as described in the guide (opening post) for your device. Usually, it requires full wipe: wipe data/factory reset, wiping cache and wiping dalvik cache (in CWM recovery under "advanced"). Right after that you can install the CM zip, and after tge CM you should also install gapps for that CM version as apps for another android version won't be compatible. As you didn't write which CM you flash, I can not tell you which gapps do you need. If you can reach your CWM recovery now, just do as described and you will obtain the CM system.
You shouldn't lose your photos that way. If you want to install CM10.2 build, wait for next nightly as the nightlies between 24 and 26 Aug could format the internal SD, that is now sold and will be OK in the nightly build 27th and onwards.
After booting in your new CM system don't ever try to restore apps made with Titanium backup in another ROMs. It isn't compatible anymore with the CM. Install the apps simply again downloading them from play store.
If I could get into recovery mode, or even download mode, I wouldn't need USB jig (and I am still not even sure that will help).
The rom I was installing was cm-9.1.0-galaxysmtd.zip
I formatted system, boot, and I think everything else except for the sdcard.
Now the phone is stuck on CyanogenMod logo, which appears just after Galaxy S logo. Then it waits 10 seconds, and reboots again.
Is the phone and/or data on the sdcard gone?
impactor said:
Is the phone and/or data on the sdcard gone?
Click to expand...
Click to collapse
Just flash the CM 9 ROM twice, it will bootup, so long as you did not format SDcard, everything in it will be there
Look in My Android solutions (link Below), if you need to to enter recovery or download mode
You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
Thanks, but I don't think we understand each other.
It is impossible to enter recovery or download mode. Maybe USB Jig will let me enter download mode.
The question is - when I recover the phone using Odin in download mode (I think I need to select 'repartitioning' option?), will it erase internal sdcard?
impactor said:
The question is - when I recover the phone using Odin in download mode (I think I need to select 'repartitioning' option?), will it erase internal sdcard?
Click to expand...
Click to collapse
Don't do it, it will screw up your phone! Don't EVER check re-partition if you don't flash also PIT file for your device!
I don't understand what do you mean here:
it is impossible to enter recovery or download mode. Maybe USB Jig will let me enter download mode.
Click to expand...
Click to collapse
Can you or can you not enter download mode with 3-buttons combo?
___________________________________________
Sent from GT-P5110 powered by CM 10.2
No, I cannot. Not with 3 buttons, not with 2, not with usb cable trick, not with anything.
impactor said:
No, I cannot. Not with 3 buttons, not with 2, not with usb cable trick, not with anything.
Click to expand...
Click to collapse
Try this:
remove the battery
keep power button pressed for about 30sec without battery
use 3-button combo for recovery mode and insert battery again while all three buttons are pressed (acrobatic thing)
Is recovery mode accessible again?
BTW you will not lose your data (photos) unless you format SD card. Let us see how to unbrick your device now as first. If you didn't backup your data, you must live with possible loss if it happens.
One more thing: please quote my text if you want me to answer (or anybody else) or reply the post directly on the button "reply" just beyond because otherwise we don't get any notification so it was pure luck that I've found your new post here by browsing....
..
tetakpatak said:
Try this:
remove the battery
keep power button pressed for about 30sec without battery
use 3-button combo for recovery mode and insert battery again while all three buttons are pressed (acrobatic thing)
Is recovery mode accessible again?
BTW you will not lose your data (photos) unless you format SD card. Let us see how to unbrick your device now as first. If you didn't backup your data, you must live with possible loss if it happens.
One more thing: please quote my text if you want me to answer (or anybody else) or reply the post directly on the button "reply" just beyond because otherwise we don't get any notification so it was pure luck that I've found your new post here by browsing....
Click to expand...
Click to collapse
No, I can't get into recovery or even download mode by this or any other method I found online.
xsenman said:
Just flash the CM 9 ROM twice, it will bootup, so long as you did not format SDcard, everything in it will be there
Look in My Android solutions (link Below), if you need to to enter recovery or download mode
Click to expand...
Click to collapse
Thanks, but I don't think we understand each other.
It is impossible to enter recovery or download mode. Maybe USB Jig will let me enter download mode.
The question is - when I recover the phone using Odin in download mode (I think I need to select 'repartitioning' option?), will it erase internal sdcard?
impactor said:
No, I can't get into recovery or even download mode by this or any other method I found online.
Click to expand...
Click to collapse
OK, then buy a jig for i9000 on eBay (it costs less than $2) and connect it according to the manual (I think the device must be turned off and after connecting it, you must wait for about 10sec until the download mode appears)
One important detail, but important nevertheless: is there still some juice in your battery? You must be sure of that, because maybe only battery is empty. Try to charge it by some friend who has the same telephone.
Let know later whats's up. Just have some patience now, mate.
tetakpatak said:
OK, then buy a jig for i9000 on eBay (it costs less than $2) and connect it according to the manual (I think the device must be turned off and after connecting it, you must wait for about 10sec until the download mode appears)
One important detail, but important nevertheless: is there still some juice in your battery? You must be sure of that, because maybe only battery is empty. Try to charge it by some friend who has the same telephone.
Let know later whats's up. Just have some patience now, mate.
Click to expand...
Click to collapse
Yes, battery is full. When I turn it on, I can see "Vibrant Samsung" logo, and shortly after "Galasy S syanogenmod" logo. Then it shuts down, and turns on again.
Vibrant????????
impactor said:
Yes, battery is full. When I turn it on, I can see "Vibrant Samsung" logo, and shortly after "Galasy S syanogenmod" logo. Then it shuts down, and turns on again.
Click to expand...
Click to collapse
Wait a second, mate: Samsung Vibrant is SGH-T959 and we are talking about GT-i9000
Are you absolutely sure you have SGH-T959 and did you try to flash on it some build for GT-i9000 maybe? It is a non-excuse mistake and you will be lucky if anything revives your Samsung Vibrant now....
impactor said:
The question is - when I recover the phone using Odin in download mode (I think I need to select 'repartitioning' option?), will it erase internal sdcard?
Click to expand...
Click to collapse
Your main concern seems to be with regards to data, now it all depends on which data, for instance flashing with or without partitioning, will only erase/change the Android folder on your SD card, so if your concern is with regards to app data, game data , sms, contacts, call log etc that will be gone by flashing.
Your camera images, music, video will not be touched and whatever other folders in your SD card will remain as is, if you had earlier CWM backup etc will be intact.
If you had debugging ON, and IF your phone can still power ON, you should try ADB push/pull to recover whatever you want first before flashing. meaning you can recover sms, phone contacts etc. so try powering ON your phone and connecting USB cable to PC while Odin3 is running on your PC. IF Odion3 detects, than you can try ADB method.
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
tetakpatak said:
Wait a second, mate: Samsung Vibrant is SGH-T959 and we are talking about GT-i9000
Are you absolutely sure you have SGH-T959 and did you try to flash on it some build for GT-i9000 maybe? It is a non-excuse mistake and you will be lucky if anything revives your Samsung Vibrant now....
Click to expand...
Click to collapse
I am absolutely sure I have GT-I9000. So it says on the back cover, and under the battery. Plus, I am in europe where there is only I9000 version.
xsenman said:
If you had debugging ON, and IF your phone can still power ON, you should try ADB push/pull to recover whatever you want first before flashing. meaning you can recover sms, phone contacts etc. so try powering ON your phone and connecting USB cable to PC while Odin3 is running on your PC. IF Odion3 detects, than you can try ADB method.
Click to expand...
Click to collapse
No, ADB is gone. That was the first thing I tried. The phone doesn't get that far in boot process.
impactor said:
No, ADB is gone. That was the first thing I tried. The phone doesn't get that far in boot process.
Click to expand...
Click to collapse
Sounds bad....
I think it is really the best you can do to try it with the jig now.
So you should get your device into the download mode. After that, we can say you're on safe side again. I would save now battery juice and wait until the jig is there.... (or make one yourself, it's easy and there are video tutorials how to do it)
impactor said:
No, ADB is gone. That was the first thing I tried. The phone doesn't get that far in boot process.
Click to expand...
Click to collapse
Ok, so what data is most important for you here?
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
xsenman said:
Ok, so what data is most important for you here?
Click to expand...
Click to collapse
Photos, music, stuff like that. I don't care for contacts. As for SMS, i have titanum backup on this sdcard, too.

Flashing to new ROM but always freezes on Semaphore

I installed CWM through ODIN on my I9000 and booted into recovery mode through CWM and tried to flash two different ROMs but each time it hangs with the Semaphore flag and logo on the screen, after which it never boots and returns to the same screen. I can get it into download mode and I have reflashed a stock ROM and its back to normal.
Any guesses on how I can get around this? Thanks!
hsuffyan said:
I installed CWM through ODIN on my I9000 and booted into recovery mode through CWM and tried to flash two different ROMs but each time it hangs with the Semaphore flag and logo on the screen, after which it never boots and returns to the same screen. I can get it into download mode and I have reflashed a stock ROM and its back to normal.
Any guesses on how I can get around this? Thanks!
Click to expand...
Click to collapse
some ICS/Jelly Bean ROMS need to be flashed twice or thrice..no harm in doing so . read this
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
xsenman said:
some ICS/Jelly Bean ROMS need to be flashed twice or thrice..no harm in doing so . read this
Click to expand...
Click to collapse
I've tried again, following the exact instructions. Install CWM, wipe the 3 data sources and install rom from sdcard. Within 2-3 seconds the phone reboots and arrives at the Semaphore screen. I've tried 3 times now and each time I have to reinstall a stock rom to get the phone alive again.
This depends on ROM you are flashing, you do not seem to tell us, what ROM you are flashing, you need to repeat the flashing in SD card , TWICE, and some may work only if ( after flashing) you go back into CWM recovery and flash again ..
Anyway this will help you solve problems
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
Sorry the rom is - pa_galaxysmtd-3.99-RC2-20130921
Unfortunately I cannot flash twice because I can't get into CWM once we hit the Semaphore screen. I can pull the battery and do volume down/home/power but it only takes me to downloading option, not recovery. So I'm unsure how I can flash twice without going to stock rom in between?
hsuffyan said:
Sorry the rom is - pa_galaxysmtd-3.99-RC2-20130921
Unfortunately I cannot flash twice because I can't get into CWM once we hit the Semaphore screen. I can pull the battery and do volume down/home/power but it only takes me to downloading option, not recovery. So I'm unsure how I can flash twice without going to stock rom in between?
Click to expand...
Click to collapse
you can repeat flash, when you doing it the first time by just repeating the process and only rebooting after you have flashed it more than once and after that flash the gapps than reboot. or try for a stable version.
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
thank you for that. I finally managed to install the rom and Google Apps, but its not picking up my sim card.
It does pick up the networks when I search for them but doesn't let me connect to any of them. The sim is definitely not the issue.
hsuffyan said:
thank you for that. I finally managed to install the rom and Google Apps, but its not picking up my sim card.
Click to expand...
Click to collapse
What's the IMEI on the phone at this moment? (type *#06# to find it) IF you don't have IMEI you this to resolve
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
it does have a imei showing. do I need to post it here?
hsuffyan said:
it does have a imei showing. do I need to post it here?
Click to expand...
Click to collapse
If your phone status like this
or your IMEI is 0000 than you need to use your efs backup to resolve like this
[6] Problem:- lost my IMEI or changed on upgrading to JB CM 10
Quote:
Solution:- Reason is you had Jumped from GB to JB (should be on ICS before JB), so now you need to
1) Download Root Explorer, or Xplore, or any root browser from Play Store and use it to
2) Search you internal SD card for sdcard/backup/efs or any other backup you have for your efs
3) Copy nv_data.bin, nv_data.bin.md5 paste them (means overwrite existing files) into /efs in your Internal Phone memory
4) Fix permissions by Click on efs folder and keep it pressed to open the menu and click on permissions and set them to rw_r_r_ ( Owner = read & write - Group = read only and Others = Read only), after this Save using menu and exit using menu
5) Power down phone and reboot into recovery and wipe cache before rebooting phone to get back your original IMEI
or
you can start from the beginning.. go back to GB 2.36 (use a JVU ROM + Root, upgrade to ICS CM 9 and than to CM10
Solution for i9000 on JB:-Try not to jump from Gingerbread to Jellybean, as all upgrades should be done progressively. meaning you need to be on a GB 2.3.6> than into ICS and finally into JB.
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
the imei matches the one printed on the phone, so i dont think thats an issue.
hsuffyan said:
thank you for that. I finally managed to install the rom and Google Apps, but its not picking up my sim card.
It does pick up the networks when I search for them but doesn't let me connect to any of them. The sim is definitely not the issue.
Click to expand...
Click to collapse
IF you phone number is correct , if not use this method to correct it . If it still fails than you may need to flash another modem an try ..
you need to recall what modem version you used before for your region and search for similar modem from here
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
Try to change your modem to JW4 or contact directly to SferaDev. I have this ROM without any problems, and it contains Semaphore by default
Could this be a bug in the PA-ROM?
hsuffyan said:
Sorry the rom is - pa_galaxysmtd-3.99-RC2-20130921
Unfortunately I cannot flash twice because I can't get into CWM once we hit the Semaphore screen. I can pull the battery and do volume down/home/power but it only takes me to downloading option, not recovery. So I'm unsure how I can flash twice without going to stock rom in between?
Click to expand...
Click to collapse

Nothing work in recovery

I want to help a friend who has a problem with this phone.When I try to enter the bootloader stuck on this part
And when I go first time into recovery mode I see this text
How I managed to figure out in this phone there is nothing installed.I try to install some update that was on the memory card, but it did not work.Can someone help me what to do to solve this problem and can install any custom rom?
talicni67 said:
what to do to solve this problem and can install any custom rom?
Click to expand...
Click to collapse
From MY Android Solutions
[28] Problem:- ClockworkMod Recovery giving E:unknown volume for path [/cache/recovery/command]
Solution:- This is due to the Installed version of CWM on your Phone is incompatible/corrupt so change to another version of CWM
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
But how I know which version of cwm is curently installed, and which version I need to find to fix the problem?Any sugestions?
talicni67 said:
But how I know which version of cwm is curently installed, and which version I need to find to fix the problem?Any sugestions?
Click to expand...
Click to collapse
Depends on the Kernel you had flashed before on the ROM you had, The version you have is 3.0.0.5, written on the image your posted. Here you must know and indicate what is your phone model. Galaxy S has 20 variants, ans their ROMs, kernels may not be compatible with each other. So what is your phone model?
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
The phone is not mine,this is my best friend phone and I want to help him.When I pull out battery underneath is written GT-i9000.I don't know where else to look for information about phone model.
talicni67 said:
The phone is not mine,this is my best friend phone and I want to help him.When I pull out battery underneath is written GT-i9000.I don't know where else to look for information about phone model.
Click to expand...
Click to collapse
What ROM ? he had (gingerbread, ICS or Jbean) and what you want to flash? ( name of ROM and version)
EDIT: IF the phone is working, look in setting > about phone for all the details, you can screen shot and post here
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
I think that he have GB.Phone is stuck on logo screen where is written Galaxy S and don't go further.I want to install custom rom if it's possible and restore phone to life.I do not know what's the first thing needed in order to start the whole process.Do I need to first install CWM and then custom rom or what?And which version of cwm?
talicni67 said:
I think that he have GB.Phone is stuck on logo screen where is written Galaxy S and don't go further.I want to install custom rom if it's possible and restore phone to life.I do not know what's the first thing needed in order to start the whole process.Do I need to first install CWM and then custom rom or what?And which version of cwm?
Click to expand...
Click to collapse
ok follow this guide step by step to what you want. first download and flash the gingerbread ROM + kernel to get phone working , than chose the ICS ROM, you like and finally to Jelly Bean, if that is what you want.
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
I do first thing from the first post on the tutorial you give me "Only Rooting or Flashing Kernels or Modems"
I now download ICS rom from this
Code:
http://forum.xda-developers.com/showthread.php?t=1592131
and hope the phone is work after I flash the rom.
NOTEhone is still stuck on the screen logo after I done with him in ODIN and when I go to recovery same thing as earlier.
talicni67 said:
I do first thing from the first post on the tutorial you give me "Only Rooting or Flashing Kernels or Modems"
Click to expand...
Click to collapse
wooh, Hold on! you flashed dbdata. rfs and hope it will work?, Step by step meant flash the gingerbread ROM with kernel as written above, the link is inside the upgrading or downgrading to gingerbread section.
Flashing a kernel alone would work too, but you are not sure what version of ROM, you really have on your phone.
IF you are positively sure you had a gingerbread ROM, than flash this to solve your problem
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
Sorry for my impatient
I'm hardly try to help my friend and in that rush I make mistake.Curently download
i9000 JVU ROM with i9000 JVU CF ROOT Kernel
Click to expand...
Click to collapse
from upgrading or downgrading to gingerbread and I hope that I manage to restore phone back.
EDIT:I did everything as it says in the tutorial, and when I finished the first part of the tutorial
1. Fire up Odin3 on your PC and ensure KIES is not running on your PC by killing (Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe) using Task Manager
2. Put the phone to the Download Mode by pressing (VolumeDown+Home+Power) buttons and connect the phone to your PC (your phone should be recognized)
3. Select PDA > CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
4. Select PHONE > MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
5. Select CSC > GT-I9000-CSC-MULTI-OXAJVU.tar.md5
6. Select PIT > 512 PIT (If 'Re-Partition' is not checked under 'Option', check it)
7. Press the Start button Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
after which you repeat steps one and two
Click to expand...
Click to collapse
the phone goes in the recovery mode and there was fresh version of recovery but it still reported the some errors.
After that I did the last part of the tutorial but something is not right
3. now select PDA > CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS
4. press Start Button. Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
Click to expand...
Click to collapse
The problem lies in dbdata.rfs which I installed earlier,and can you help me how to fix my mistake?

[Q] Phone wont boot, not able to push files on it.

Hello, my galaxy GT-i9000 phone wont boot anymore. I tried to install a custom rom on it wich i succeeded in. After a while i wanted to install diffrent one and tought that i could simply boot in recovery mode hit the wipe data/factory reset button and then apply update.zip. This was not the case as it corrupted the previous rom and did not install the new rom. I can still start my phone into ClockworkMod recovery and download mode. I tried to push a new rom on my SDcard whit adb push but this gives me /system/bin/sh: adb: not found. I'm kinda hoping on some kind of recovery tool that will allow me to push a diffrent rom on my phone.
ConFlicker said:
Hello, my galaxy GT-i9000 phone wont boot anymore. I tried to install a custom rom on it wich i succeeded in. After a while i wanted to install diffrent one and tought that i could simply boot in recovery mode hit the wipe data/factory reset button and then apply update.zip. This was not the case as it corrupted the previous rom and did not install the new rom. I can still start my phone into ClockworkMod recovery and download mode. I tried to push a new rom on my SDcard whit adb push but this gives me /system/bin/sh: adb: not found. I'm kinda hoping on some kind of recovery tool that will allow me to push a diffrent rom on my phone.
Click to expand...
Click to collapse
In CWM you do this method to flash, to place the ROM you intend to flash in SD card you use mounts and storage, usb storage, to copy your .zip ROM and gapps to SD card
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
Hey, thanks alot for the quick reply! i got my ROM working now. The Rom i downloaded and installed was Slimbean
(This one Slim-I9000-3.1.0-OFFICIAL )
Click to expand...
Click to collapse
. There is just one problem. I cant connect to the internet (3G/2G). I did some research and i think i miss something called a ''baseband'' as it is labled unknown in the phone information. What file do i need to get and how do i install it?
ConFlicker said:
Hey, thanks alot for the quick reply! i got my ROM working now. The Rom i downloaded and installed was Slimbean . There is just one problem. I cant connect to the internet (3G/2G). I did some research and i think i miss something called a ''baseband'' as it is labled unknown in the phone information. What file do i need to get and how do i install it?
Click to expand...
Click to collapse
most likely you lost your IMEI, caused by jumping from Gingerbread to Jelly bean look in My Android solutions (link below) for
6) Problem:- Lost my IMEI or changed on upgrading to JB CM 10
16) Problem:- No Network and Signal ( calls, sms and mobile Internet not working)
17) Problem:- No base Band or Unknown Baseband
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
xsenman said:
most likely you lost your IMEI, caused by jumping from Gingerbread to Jelly bean look in My Android solutions (link below) for
6) Problem:- Lost my IMEI or changed on upgrading to JB CM 10
16) Problem:- No Network and Signal ( calls, sms and mobile Internet not working)
17) Problem:- No base Band or Unknown Baseband
Click to expand...
Click to collapse
Well i tried to solve it myself whit your tutorials but nothing seems to work. I flashed back to a stable stock rom (The JPU One in your post) I deleted and replaced the efs folder like 5 times from the correct efs file i downloaded somewhere on this forum as i did not make a backup of my original one. I cleared EFS useing Odin. It simply does not want to connect. Sometimes a 3G logo pops up but it never works.
ConFlicker said:
Well i tried to solve it myself whit your tutorials but nothing seems to work. I flashed back to a stable stock rom (The JPU One in your post) I deleted and replaced the efs folder like 5 times from the correct efs file i downloaded somewhere on this forum as i did not make a backup of my original one. I cleared EFS useing Odin. It simply does not want to connect. Sometimes a 3G logo pops up but it never works.
Click to expand...
Click to collapse
Look at this
Final Solution:-
When NOTHING works and its going to drive you nuts, just walk down to your nearest Phone repair shop, find out how much they will charge for using their Riffbox/z3x/spt/octopus box to fix the IMEI, and it can be resolved in a few minutes when the problem is software related.
IF it is Hardware related than it could be due to base-band problem and may need an IC ( modem/baseband chip) replacement to resolve.
to verify do the following test
type *#06# , and IF you get message "imei null" or imei starts by 0049XXXX or 00000 it should be resolved by software .
but IF nothing is shown when you type *#06#, that is a hardware problem or look at attached picture below. .
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

Categories

Resources