Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
thinkfreedom said:
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
Click to expand...
Click to collapse
You will always have that problem coz the ROMs you flashed requires GB. so go flash GB first before you install CWM and custom ROMs..
thinkfreedom said:
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
Click to expand...
Click to collapse
it should be 2.3.4 before you installing CWM
HERE IS WHAT YOU NEED:
1. YOU NEED TO FLASH YOUR PHONE TO GINGERBREAD 2.3.4
2. AFTER FLASHING STOCK ROM, ROOT IT!
3. INSTALL CLOCK WORK MOD
In this part, it is now the installation of your CUSTOM MADE ROM
1. Wipe Dalvick Cache
2. Wipe Data/Reset
3. Wipe Cache
4. Install Zip from sd card then locate the zip file
5. YOUR GOOD TO GO!
BTW: Always wait for the rom to load, it may take awhile to load if it is installed for the first time
Like If this helped you THANKS
What's your model number? ?
You need to flash GB-
Using Odin multi downloader+tass and also need CWM(for flash CM)...
Sent from my GT-S5570 using XDA
Thanks buddies...but already found a way out now my phone is working.
Hi everyone
i want to install ics cm9 on my galaxy s and this is my first time , i never flashed a device before and dont know what root means
please can someone tell me the easiest way to install ics on my galaxy s
thanks
Firstly go into settings and about phone the put your android version up
Sent from my Awesome I9000 running Slim Bean
firmware version is 2.3.6
install the clockwork recovery mod (just search in the xda forums and u will find a tut)
afterwards download the cm9.zip file put it on ure sd card wipe data/cash partition in the recovery mod u flashed (its the cwm) afterwards flash the cm9 zip reboot and ure done
Hey
There is a link to Upgarde and Root 2.3.6 Below...(Required to flash CM9)
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
przemek211 said:
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
Click to expand...
Click to collapse
Status 0 is due to having wrong CWM on you phone, likely you are on ICS ROM and using JB kernel and trying to Flash JB ROM
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
This is a kernel based on the pawitp's one and it works for Android 4.1.1 JB ROMs.
This version works for Jelly Bean ROMs
Click to expand...
Click to collapse
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
przemek211 said:
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
Click to expand...
Click to collapse
Which date on nightly you trying to install
Sent from my GT-I9000 using xda premium
thanks for so fast answer
I tried the newest version 'experimental' (10/8) and next one "nightly" (10/3), but it looks that the problem are not in ROMs. I tried c-rom, tsunami and there is the same problem.
przemek211 said:
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
Click to expand...
Click to collapse
yes kernel will work but CWM does not, so flash the ICS kernel to solve your problem , you are currently on ICS, so use ICS kernel and upgrade to JB, once in JB , use JB kernel
sorry, but i don't understand. i should install the ics kernel, e.g. from here: http://www.semaphore.gr/downloads/gt-i9000-ics and next i need to install JB kernel from sdcard in cwm of ics?
przemek211 said:
sorry, but i don't understand. i should install the ics kernel, e.g. from here: http://www.semaphore.gr/downloads/gt-i9000-ics and next i need to install JB kernel from sdcard in cwm of ics?
Click to expand...
Click to collapse
One you have an ICS kernel, your CWM will be able to Flash a JB ROM in recovery, once you have a working JB ROM, its up to you , IF you would like to have JB Kernel , just Flash that
thank you @xsenam
now i have JB ROM and JB Kernel.
Everything works, but in GB i had the Semaphore settings and now i didn't see that, only Superuser. Should it be in the apps?
przemek211 said:
thank you @xsenam
now i have JB ROM and JB Kernel.
Everything works, but in GB i had the Semaphore settings and now i didn't see that, only Superuser. Should it be in the apps?
Click to expand...
Click to collapse
use Semaphore kernel manager for JB http://forum.xda-developers.com/showthread.php?t=1886686
Ok, so again: thank you and sorry for my mistake in your nick @xsenman
Greetings from Poland for Republika ng Pilipinas
sadly i have one more issue, i've inserted my sim card and the phone shows: mobile network not available, when i'm going to search mobile networks it shows: 'error while searching for networks'. I tried to ON&OFF aeroplane mode (as i read in google), but it doesn't help.
przemek211 said:
sadly i have one more issue, i've inserted my sim card and the phone shows: mobile network not available, when i'm going to search mobile networks it shows: 'error while searching for networks'. I tried to ON&OFF aeroplane mode (as i read in google), but it doesn't help.
Click to expand...
Click to collapse
just check if you still have your IMEI, if not use a solution from My Android Solutions to fix it
BUT make sure you inserted your sim card in the correct direction
No i don't have an IMEI (checked by *#06# code, shows only "IMEI" without the number). So, if i didn't make a backup i need to flash an old ROM, go to CWM and make a wipe, delete EFS folder with root explorer and install the ICS kernel with Phone EFS Clear ticked?
I have next problem. My i9000 resets byself and goes to CWM. He made it for three times when i didn't use him.
przemek211 said:
No i don't have an IMEI (checked by *#06# code, shows only "IMEI" without the number). So, if i didn't make a backup i need to flash an old ROM, go to CWM and make a wipe, delete EFS folder with root explorer and install the ICS kernel with Phone EFS Clear ticked?
I have next problem. My i9000 resets byself and goes to CWM. He made it for three times when i didn't use him.
Click to expand...
Click to collapse
NO, all you need to do is , was written in above link
1) Download Root Explorer from Play Store and use it to
2) Search you internal SD card for sdcard/backup/efs
3) Copy nv_data.bin, nv_data.bin.md5 and nv.log paste them into /efs in your Phone memory
4) Reboot to get back your original IMEI
or
you can start from the beginning.. go back to GB 2.36 (use a JVU ROM + Root, upgrade to ICS CM 9 and than to CM10
First of all I installed twrp 2.2 and I felt into bootloop so I flashed Bootloader.tar and now my phone is working good;but I have a question ;If I go into recovery mode next time I will be in bootloop again and I must flash bootloader again?!
Sorry for my bad English!
alireza7991 said:
First of all I installed twrp 2.2 and I felt into bootloop so I flashed Bootloader.tar and now my phone is working good;but I have a question ;If I go into recovery mode next time I will be in bootloop again and I must flash bootloader again?!
Sorry for my bad English!
Click to expand...
Click to collapse
you can flash a CWM 6.0 or TWRP 6.0 to recover , IF your current TWRP is bad ,
xsenman said:
2) Search you internal SD card for sdcard/backup/efs
Click to expand...
Click to collapse
I don't have this backup folder
przemek211 said:
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
Click to expand...
Click to collapse
if you have cwm(any version)
you can install whatever rom you have
if you are on other bases like GB or ICS and trying to install JB or new versions of cm10
you should do the installing process three times
there will be an error after first try and on the second it will install but you will get bootloop and you have to take out battery put it back and boot to recovery with three button combo and start the third time of install process after that do a restart and you are done
good luck :good:
thanks for your reply, but I solve that problem with @xsenman help. Now I have issue with mobile network.
@xsenman: i understand that i need to install old rom from your post and just make upgrade to ics? Or should I make any other steps in this tutorial?
Hy!
After I changed gb layout to ics layout, I installed a rom ([ROM] ICS-android 4.0.4-FLEX-ICER), which works me perfectly, but if i'd like to change for another rom (new ics bootloader roms) CWM can't flash it. I changed the layout with all-in-one toolkit. CWM is v6.0.1.5. What can I do? Thank you for your answers
Strange issue ^^'
Did you format system ?
Or maybe try reflahing CWM (don't remember which version is for New ICS unlocked bootloader)
Or a good NVflash as usual
Mynix said:
Strange issue ^^'
Did you format system ?
Or maybe try reflahing CWM (don't remember which version is for New ICS unlocked bootloader)
Or a good NVflash as usual
Click to expand...
Click to collapse
I see all my internal storage, i made fortmat in cwm try install other roms, but nothimg change can i change cwm with all in one toolkit? Or change back to gb partition layout? I`m a little bit noob so...
Yes haven't tried but for sure you can flash cwm from AIO toolkit and also go back to GB layout too
I think you should try to NVflash a rom (ICS or GB bootloader) then root (AIO) flash a cwm recovery (Still from the perfect AOI toolkit) and reflash the rom you want from cwm, that's the cleanest way
Mynix said:
Yes haven't tried but for sure you can flash cwm from AIO toolkit and also go back to GB layout too
I think you should try to NVflash a rom (ICS or GB bootloader) then root (AIO) flash a cwm recovery (Still from the perfect AOI toolkit) and reflash the rom you want from cwm, that's the cleanest way
Click to expand...
Click to collapse
Could you suggest me a rom? Or i need to flash original rom? (thank you for your help )
Sometimes the problem lies with your downloaded rom. Maybe its corrupted and not downloaded properly. Try redownloading it or download a new compatible ROM. DjangoManouche X 1.2.1 by carburano works for me.You can give that a try. Or ParanoidAndroid v2.5 by tonyp.
Everyone forgets to flash this special recovery when wanting to flash CM10 based roms:
http://forum.xda-developers.com/showthread.php?t=2058231
read the post, flash the special recovery, then bam you'll be able to flash your new rom.
Hi ,
I have followed the the procedure 【Guide】How To flash ANY Captivate ROM from Stock (including ICS) to upgrade my Froyo 2.1 to any latest rom but it failed to do so due to error
Installing:SDCARD:Rom_name
Finding update package...
Opening Update package.......
Installing update.....
E:Error in /mnt/sdcard/Rom_name
(status 0)
Installation aborted
Click to expand...
Click to collapse
. I have now CWM recovery V2.5.1.0 Speedmod ULFX installed ( Green text one) . I have learned in so many posts that this version of CWM is too old to install recent ROMs . I've tried below rom but couldn't make that work :
CyanFox Rom
omni-MACKAY_ROM-4.4.2-20131217-galaxysmtd
I tired :
Wipe out cash
User data
Please help me on this
byazid said:
Please help me on this
Click to expand...
Click to collapse
Read carefully and follow this Guide. For 4.3.x and 4.4.x based ROMs see installation instructions in corresponding threads.
Val D. said:
Read carefully and follow this Guide. For 4.3.x and 4.4.x based ROMs see installation instructions in corresponding threads.
Click to expand...
Click to collapse
Hi,
Thanks for your reply. I've finally made my way to install [ROM][JB] [4.3] Avatar ROM for Samsung Captivate but it has just too many bugs.My keyboard is not working and keeps on crashing. Now i have CWM 6 installed and which helped this ROM installed. Regarding other ROM i have mentioned here is still giving me the same error.
Any idea?
byazid said:
Any idea?
Click to expand...
Click to collapse
Describe exactly what you did starting from stock 2.1 ROM.
Val D. said:
Describe exactly what you did starting from stock 2.1 ROM.
Click to expand...
Click to collapse
Hi,
I was finally able to flash the AVATAR rom . I messed around with installing latest google apps and which made the keyboard crashed , Now its working like charm ,
However, here is what i did.
1. I followed the guide 【Guide】How To flash ANY Captivate ROM from Stock (including ICS) to upgrade my Eclair 2.1 . Did exactly what was in the tutorial and succeed . ** Just a note- I missed to copy ROM in the SD card , which i managed to do later by mounting USB storage from CWM .
2. I went for flashing and it was always giving me the error when i tried to flash my phone with the rom CyanFox Rom
3. Then i downloaded the rom AVATAR and went for flashing , suddenly the phone rebooted ( Still it did not install the ROM) and a new version of CWM 6 appeared with Blue text . From there i flashed the new ROM and it was a success.
Currently i am running my phone without any problem .
However, I still can not flash below ROM
CyanFox Rom
omni-MACKAY_ROM-4.4.2-20131217-galaxysmtd
do you have any idea on how to make it work ?
- stop asking same questions in 2 different threads, please
- read carefully the Guide in post #2 ant try to understand the process
- read carefully installation instructions for the ROMs you want to try
- avoid installation of experimental/ported ROMs as your first Custom ROM
- be careful what partition setup is needed for the ROM you want to install
- don't change default CM kernel for CM10.2 and up
Status 0
Status 0 means that you have a wrong script (for your phone). The script in "/META-INF/com/google/android" folder. I doubt that it's the ROM's problem. I also flashed CyanFox 4.4 for Galaxy S II. But had to flash CWM 6.0.4.x first. It worked only then, it didn't even flash using CWM 6.0.3.
So I think you can also flash CWM 6.0.4.x on your cappy and try this?