I'm unfamiliar with how this all fits together. For example, I don't understand how if the bootloader is unlocked, why will it still brick the device if the bootloader is mismatched? Why would the BL version matter if it's unlocked? If the BL will still cripple the device, then it's not really "unlocked", is it?
Also, what does this mean in the future after Motorola stops updating the X? I know we can flash ROMs, but will we be stuck using the base of whatever update Moto/Verizon decides to put out?
The more detailed the better. I've tried googling and searching here, but I can't find any sort of place where this info is gathered & presented in a digestible format....all I'm finding is little pieces of info here & there. I don't even know enough to properly ask for more info. Any help, explanations, or links would be greatly appreciated.
Hopefully this gets you started... Its not completed, but I was typing it up in my spare time because I see a lot of people asking these questions
Versions of the Moto X..
There are 3 main versions of the Moto X available today..
1. Carrier Branded (aka Retail). Except for T-Mobie USA, this is available for order/pickup directly from your Carrier, their store or web site.
2. MotoMaker Edition. Available directly from Motorola.com. Ordering this version allows you to customize your device by selecting Memory, Front Color, Back Color, Accent (button, camera trim ring) color, add custom wall paper, engraving on the back, or even startup message.
3. Developer Edition. Available directly from Motorola.com. Available as black front, woven white back, silver accent (button/camera trim ring).
Due to the frequencies used by the various wireless carriers where the phones are sold, there are a few different model number designations like XT1060 (Verizon), XT1058 (AT&T), XT1053 (T-Mobile USA and GSM Developer Edition), along with other models depending on location/carrier. (NOTE: the Retail/MotoMaker and Developer Edition for Verizon are both XT1060).
Locked vs Unlocked bootloader. Why is this important?
Whats the difference between locked and unlocked?
While this article gives a good, detailed explanation -> http://www.extremetech.com/computin...tloader-and-why-does-verizon-want-them-locked
An overly simplified way of explaining this would be to say that With a locked bootloader, you can only flash ROMS and software digitally signed by your phone maker. Having an unlocked Bootloader allows you to flash custom roms, recoveries, kernels, etc, or to fully hack/customize your phone.
Why would I want unlocked bootloader?
If you are looking to root your phone and have a locked bootloader, you have to wait for someone to find a flaw in your phones rom/firmware, and exploit/hack it. This is getting increasingly difficult as Android evolves. As new updates for the phone get released, you need to wait until someone finds a usable exploit, creates a repeatable process that is relatively safe, and releases it. This could takes weeks, months, or never come. For Android 4.2.2, there was a process called RockMyMoto, for Android 4.4, SlapMyMoto. Neither of these exploits work for the Android 4.4.2 update, and as of this writing, no exploit/hack/process has been released for 4.4.2.
Having an unlocked bootloader, and being able to flash 3rd party code simplifies the rooting/hacking process, but could also be dangerous. If you want to root without having to wait on exploits or processes to be found, having an unlocked or unlockable bootloader is considered best. Once your bootloader is unlocked, you can install a custom recovery (like TWRP), boot to it, and install SuperSU and you will be rooted. This can be done no matter what ROM version is on your phone.
To fully remove the phone maker's rom, and replace it with a completely custom rom, your phone needs to have an unlocked bootloader.
Can I unlock the Bootloader on my Moto X?
If you have a Developer Edition Moto X, yes you can unlock the bootloader and it doesn't void your warranty.
If you have a MotoMaker or Carrier Branded model, it depends on IF your carrier allows Motorola to do it, and will void your warranty. For example, Verizon and ATT does now allow Motorola to unlock your boot loader. To see if your Moto X bootloader can be unlocked see -> https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth You can step through the procees until you get to the final submit WITHOUT voiding your warranty. Once you hit the final submit to request the code, your warranty is voided (unless your phone is the developer edition)
For the Verizon and ATT which Moto's web site wouldn't give out bootloader unlock codes, there was an option of buying the Bootloader Unlock Code for Non-Dev Verizon X from a Chinese site or middleman, but it appears to have dried up. (no contact from the seller in a few days, and rumors he got caught/fired/worse)
What is Write Protection Enabled or Disabled? Why is this important?
Due to trying to enhance the security on newer Android phones, the Motorola X ships with "Write Protection" enabled. This prevents any changes to /System or other "protected" folders from surviving a Power Off/On (aka hard reset). If you manage to gain root, but Write Protection is still enabled, any changes you make while rooted would be lost after Power Off/On.
If you have an unlockable bootloader, unlocking the bootloader disables write protection.
If you have a locked bootloader, an exploit/hack needs to be found and process needs to be developed and released. For Android 4.4 and below on the X, a process called MotoWpNoMo was used, however the Android 4.4.2 update closed/fixed the exploit and MotoWpNoMo no longer works. So as of this writing, if you have a locked boot loader, there is no way to Disable Write Protection on Android 4.4.2.
Can I downgrade the firmware on my phone before or after I unlock the bootloader?
As for downgrading firmware, the same caveats and warnings still apply. Due to changes in the bootloader included with 4.4.2, under certain circumstances when trying to downgrade from 4.4.2 to 4.4 or lower, you could either brick your phone, or set it up to brick in the future when you take an upgrade. So it is suggested you just stick with what is on your phone once you get on 4.4.2.
Can flash a 3rd party or custom rom?
If you want to flash a Non-Motorola ROM on your phone, say something like CyanogenMod, you MUST have an unlocked bootloader.
Can you just tell me how to root my Moto X phone?(sorry, this might be the long answer, but hopefully it will help you understand what I'm saying and why..)
SlapMyMoto can be used to root, and MotoWpNoMo can be used to disable write protection *IF* your phone is on 4.4 or lower.
MotoWpNoMo (which disables write protection) is needed because when Write Protection is enabled (the phone's default state with locked bootloader, or the state you are in after you take the 4.4.2 OTA), any changes made to /system, or the like, (including, but not limited to, App installs, file modifications, deletions, renames, etc) are not permanent and are lost at power off/on. Even if you have root, but lost Write Protection, any apps you've installed that need to write to system can't permanently save their changes (you have to re-do every time your phone powers off/on), and any Root type app, or app that gets installed to /system after WP is enabled will be lost at power off/on.
If you are on 4.4. and use SlapMyMoto/MotoWpNoMo, but later take the OTA to 4.4.2, you might keep root but Write Protection will be re-enabled with no way to disable it.
Due to fixes and changes in 4.4.2, the Root and Disable Write Protection processes that worked on 4.4 and lower, no longer work on 4.4.2. And don't expect anything for 4.4.2 for a while, if ever. So if the phone you buy comes with 4.4.2 pre-installed, or you have taken the 4.4.2 OTA update, and you have a locked bootloader you're stuck!!
This is not an issue if you have an unlocked bootloader. You can still unlock your bootloader (which disables write protection), and root (by just using a custom recovery and flashing SuperSU) no matter what rom is on your phone.
In conclusion...
If you really need ROOT, Write Protection Disabled, want to modify/replace/delete system files, the ability to tether on an unlimited data plan, flash a custom rom (like CyanogenMod or others) then you really should consider getting the Developer Edition X, as you can unlock its bootloader (without voiding warranty), root it (no matter what rom is on the phone), and do what you want.
If your carrier allows Moto to give you the code to unlock the bootloader, then you just have to weight the option of being able to order your phone customized (moto maker) and unlock the bootloader while voiding the warranty, or have an uncustomized phone that the warranty remains intact should you unlock the bootloader.
KidJoe said:
Hopefully this gets you started... Its not completed, but I was typing it up in my spare time because I see a lot of people asking these questions
Versions of the Moto X..
There are 3 main versions of the Moto X available today..
1. Carrier Branded (aka Retail). Except for T-Mobie USA, this is available for order/pickup directly from your Carrier, their store or web site.
2. MotoMaker Edition. Available directly from Motorola.com. Ordering this version allows you to customize your device by selecting Memory, Front Color, Back Color, Accent (button, camera trim ring) color, add custom wall paper, engraving on the back, or even startup message.
3. Developer Edition. Available directly from Motorola.com. Available as black front, woven white back, silver accent (button/camera trim ring).
Due to the frequencies used by the various wireless carriers where the phones are sold, there are a few different model number designations like XT1060 (Verizon), XT1058 (AT&T), XT1053 (T-Mobile USA and GSM Developer Edition), along with other models depending on location/carrier. (NOTE: the Retail/MotoMaker and Developer Edition for Verizon are both XT1060).
Locked vs Unlocked bootloader. Why is this important?
Whats the difference between locked and unlocked?
While this article gives a good, detailed explanation -> http://www.extremetech.com/computin...tloader-and-why-does-verizon-want-them-locked
An overly simplified way of explaining this would be to say that With a locked bootloader, you can only flash ROMS and software digitally signed by your phone maker. Having an unlocked Bootloader allows you to flash custom roms, recoveries, kernels, etc, or to fully hack/customize your phone.
Why would I want unlocked bootloader?
If you are looking to root your phone and have a locked bootloader, you have to wait for someone to find a flaw in your phones rom/firmware, and exploit/hack it. This is getting increasingly difficult as Android evolves. As new updates for the phone get released, you need to wait until someone finds a usable exploit, creates a repeatable process that is relatively safe, and releases it. This could takes weeks, months, or never come. For Android 4.2.2, there was a process called RockMyMoto, for Android 4.4, SlapMyMoto. Neither of these exploits work for the Android 4.4.2 update, and as of this writing, no exploit/hack/process has been released for 4.4.2.
Having an unlocked bootloader, and being able to flash 3rd party code simplifies the rooting/hacking process, but could also be dangerous. If you want to root without having to wait on exploits or processes to be found, having an unlocked or unlockable bootloader is considered best. Once your bootloader is unlocked, you can install a custom recovery (like TWRP), boot to it, and install SuperSU and you will be rooted. This can be done no matter what ROM version is on your phone.
To fully remove the phone maker's rom, and replace it with a completely custom rom, your phone needs to have an unlocked bootloader.
Can I unlock the Bootloader on my Moto X?
If you have a Developer Edition Moto X, yes you can unlock the bootloader and it doesn't void your warranty.
If you have a MotoMaker or Carrier Branded model, it depends on IF your carrier allows Motorola to do it, and will void your warranty. For example, Verizon and ATT does now allow Motorola to unlock your boot loader. To see if your Moto X bootloader can be unlocked see -> https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth You can step through the procees until you get to the final submit WITHOUT voiding your warranty. Once you hit the final submit to request the code, your warranty is voided (unless your phone is the developer edition)
For the Verizon and ATT which Moto's web site wouldn't give out bootloader unlock codes, there was an option of buying the Bootloader Unlock Code for Non-Dev Verizon X from a Chinese site or middleman, but it appears to have dried up. (no contact from the seller in a few days, and rumors he got caught/fired/worse)
What is Write Protection Enabled or Disabled? Why is this important?
Due to trying to enhance the security on newer Android phones, the Motorola X ships with "Write Protection" enabled. This prevents any changes to /System or other "protected" folders from surviving a Power Off/On (aka hard reset). If you manage to gain root, but Write Protection is still enabled, any changes you make while rooted would be lost after Power Off/On.
If you have an unlockable bootloader, unlocking the bootloader disables write protection.
If you have a locked bootloader, an exploit/hack needs to be found and process needs to be developed and released. For Android 4.4 and below on the X, a process called MotoWpNoMo was used, however the Android 4.4.2 update closed/fixed the exploit and MotoWpNoMo no longer works. So as of this writing, if you have a locked boot loader, there is no way to Disable Write Protection on Android 4.4.2.
Can I downgrade the firmware on my phone before or after I unlock the bootloader?
As for downgrading firmware, the same caveats and warnings still apply. Due to changes in the bootloader included with 4.4.2, under certain circumstances when trying to downgrade from 4.4.2 to 4.4 or lower, you could either brick your phone, or set it up to brick in the future when you take an upgrade. So it is suggested you just stick with what is on your phone once you get on 4.4.2.
Can flash a 3rd party or custom rom?
If you want to flash a Non-Motorola ROM on your phone, say something like CyanogenMod, you MUST have an unlocked bootloader.
Can you just tell me how to root my Moto X phone?(sorry, this might be the long answer, but hopefully it will help you understand what I'm saying and why..)
SlapMyMoto can be used to root, and MotoWpNoMo can be used to disable write protection *IF* your phone is on 4.4 or lower.
MotoWpNoMo (which disables write protection) is needed because when Write Protection is enabled (the phone's default state with locked bootloader, or the state you are in after you take the 4.4.2 OTA), any changes made to /system, or the like, (including, but not limited to, App installs, file modifications, deletions, renames, etc) are not permanent and are lost at power off/on. Even if you have root, but lost Write Protection, any apps you've installed that need to write to system can't permanently save their changes (you have to re-do every time your phone powers off/on), and any Root type app, or app that gets installed to /system after WP is enabled will be lost at power off/on.
If you are on 4.4. and use SlapMyMoto/MotoWpNoMo, but later take the OTA to 4.4.2, you might keep root but Write Protection will be re-enabled with no way to disable it.
Due to fixes and changes in 4.4.2, the Root and Disable Write Protection processes that worked on 4.4 and lower, no longer work on 4.4.2. And don't expect anything for 4.4.2 for a while, if ever. So if the phone you buy comes with 4.4.2 pre-installed, or you have taken the 4.4.2 OTA update, and you have a locked bootloader you're stuck!!
This is not an issue if you have an unlocked bootloader. You can still unlock your bootloader (which disables write protection), and root (by just using a custom recovery and flashing SuperSU) no matter what rom is on your phone.
In conclusion...
If you really need ROOT, Write Protection Disabled, want to modify/replace/delete system files, the ability to tether on an unlimited data plan, flash a custom rom (like CyanogenMod or others) then you really should consider getting the Developer Edition X, as you can unlock its bootloader (without voiding warranty), root it (no matter what rom is on the phone), and do what you want.
If your carrier allows Moto to give you the code to unlock the bootloader, then you just have to weight the option of being able to order your phone customized (moto maker) and unlock the bootloader while voiding the warranty, or have an uncustomized phone that the warranty remains intact should you unlock the bootloader.
Click to expand...
Click to collapse
Thank you for your reply! It has helped clear up most of my confusion.
Can I downgrade the firmware on my phone before or after I unlock the bootloader?
As for downgrading firmware, the same caveats and warnings still apply. Due to changes in the bootloader included with 4.4.2, under certain circumstances when trying to downgrade from 4.4.2 to 4.4 or lower, you could either brick your phone, or set it up to brick in the future when you take an upgrade. So it is suggested you just stick with what is on your phone once you get on 4.4.2.
Click to expand...
Click to collapse
Can you elaborate a little bit on this? What changes were made, and why does it brick your phone? (If the bootloader is unlocked, this shouldn't be an issue.....but this is not the case, obviously.) What makes this different than loading a ROM? Is there the same chance to brick your phone from flashing a ROM?
Arak-Nafein said:
Can you elaborate a little bit on this? What changes were made, and why does it brick your phone? (If the bootloader is unlocked, this shouldn't be an issue.....but this is not the case, obviously.) What makes this different than loading a ROM? Is there the same chance to brick your phone from flashing a ROM?
Click to expand...
Click to collapse
I didn't create the bootloader, so I can't elaborate on what exactly was changed. Moto doesn't post release notes. As why it bricks, I could only tell you what I've read. And the thread that was here discussing it in details has vanished for some reason. I do know things like GPT.BIN also come into play, but I don't remember ALL of the details.
As for this shouldn't be an issue with the bootloader being unlocked.. Well, I can tell you unlocked bootloader or not, the long thread that vanished was reports of both those who used the unlock code from Moto to unlock their bootloader, and those who still had a locked bootloader.
The bootloader is unlocked at least to the point that it disables the write protection and you can flash roms, recoveries, etc that are NOT signed by Moto. Is that "fully unlocked" I'll let someone else answer that.
If the 3rd party rom you are trying to install tries to revert the bootloader to a lower level or tries to downgrade the security files (GPT.BIN and a few others), then yes, you have a chance to brick. But most likely only the System partition will be written on 3rd party rom.
KidJoe said:
I didn't create the bootloader, so I can't elaborate on what exactly was changed. Moto doesn't post release notes. As why it bricks, I could only tell you what I've read. And the thread that was here discussing it in details has vanished for some reason. I do know things like GPT.BIN also come into play, but I don't remember ALL of the details.
As for this shouldn't be an issue with the bootloader being unlocked.. Well, I can tell you unlocked bootloader or not, the long thread that vanished was reports of both those who used the unlock code from Moto to unlock their bootloader, and those who still had a locked bootloader.
The bootloader is unlocked at least to the point that it disables the write protection and you can flash roms, recoveries, etc that are NOT signed by Moto. Is that "fully unlocked" I'll let someone else answer that.
If the 3rd party rom you are trying to install tries to revert the bootloader to a lower level or tries to downgrade the security files (GPT.BIN and a few others), then yes, you have a chance to brick. But most likely only the System partition will be written on 3rd party rom.
Click to expand...
Click to collapse
Thanks again!
I would love to read that thread if anyone has it archived or something.
KidJoe said:
Hopefully this gets you started... Its not completed, but I was typing it up in my spare time because I see a lot of people asking these questions
Versions of the Moto X..
There are 3 main versions of the Moto X available today..
1. Carrier Branded (aka Retail). Except for T-Mobie USA, this is available for order/pickup directly from your Carrier, their store or web site.
2. MotoMaker Edition. Available directly from Motorola.com. Ordering this version allows you to customize your device by selecting Memory, Front Color, Back Color, Accent (button, camera trim ring) color, add custom wall paper, engraving on the back, or even startup message.
3. Developer Edition. Available directly from Motorola.com. Available as black front, woven white back, silver accent (button/camera trim ring).
Due to the frequencies used by the various wireless carriers where the phones are sold, there are a few different model number designations like XT1060 (Verizon), XT1058 (AT&T), XT1053 (T-Mobile USA and GSM Developer Edition), along with other models depending on location/carrier. (NOTE: the Retail/MotoMaker and Developer Edition for Verizon are both XT1060).
Locked vs Unlocked bootloader. Why is this important?
Whats the difference between locked and unlocked?
While this article gives a good, detailed explanation -> http://www.extremetech.com/computin...tloader-and-why-does-verizon-want-them-locked
An overly simplified way of explaining this would be to say that With a locked bootloader, you can only flash ROMS and software digitally signed by your phone maker. Having an unlocked Bootloader allows you to flash custom roms, recoveries, kernels, etc, or to fully hack/customize your phone.
Why would I want unlocked bootloader?
If you are looking to root your phone and have a locked bootloader, you have to wait for someone to find a flaw in your phones rom/firmware, and exploit/hack it. This is getting increasingly difficult as Android evolves. As new updates for the phone get released, you need to wait until someone finds a usable exploit, creates a repeatable process that is relatively safe, and releases it. This could takes weeks, months, or never come. For Android 4.2.2, there was a process called RockMyMoto, for Android 4.4, SlapMyMoto. Neither of these exploits work for the Android 4.4.2 update, and as of this writing, no exploit/hack/process has been released for 4.4.2.
Having an unlocked bootloader, and being able to flash 3rd party code simplifies the rooting/hacking process, but could also be dangerous. If you want to root without having to wait on exploits or processes to be found, having an unlocked or unlockable bootloader is considered best. Once your bootloader is unlocked, you can install a custom recovery (like TWRP), boot to it, and install SuperSU and you will be rooted. This can be done no matter what ROM version is on your phone.
To fully remove the phone maker's rom, and replace it with a completely custom rom, your phone needs to have an unlocked bootloader.
Can I unlock the Bootloader on my Moto X?
If you have a Developer Edition Moto X, yes you can unlock the bootloader and it doesn't void your warranty.
If you have a MotoMaker or Carrier Branded model, it depends on IF your carrier allows Motorola to do it, and will void your warranty. For example, Verizon and ATT does now allow Motorola to unlock your boot loader. To see if your Moto X bootloader can be unlocked see -> https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth You can step through the procees until you get to the final submit WITHOUT voiding your warranty. Once you hit the final submit to request the code, your warranty is voided (unless your phone is the developer edition)
For the Verizon and ATT which Moto's web site wouldn't give out bootloader unlock codes, there was an option of buying the Bootloader Unlock Code for Non-Dev Verizon X from a Chinese site or middleman, but it appears to have dried up. (no contact from the seller in a few days, and rumors he got caught/fired/worse)
What is Write Protection Enabled or Disabled? Why is this important?
Due to trying to enhance the security on newer Android phones, the Motorola X ships with "Write Protection" enabled. This prevents any changes to /System or other "protected" folders from surviving a Power Off/On (aka hard reset). If you manage to gain root, but Write Protection is still enabled, any changes you make while rooted would be lost after Power Off/On.
If you have an unlockable bootloader, unlocking the bootloader disables write protection.
If you have a locked bootloader, an exploit/hack needs to be found and process needs to be developed and released. For Android 4.4 and below on the X, a process called MotoWpNoMo was used, however the Android 4.4.2 update closed/fixed the exploit and MotoWpNoMo no longer works. So as of this writing, if you have a locked boot loader, there is no way to Disable Write Protection on Android 4.4.2.
Can I downgrade the firmware on my phone before or after I unlock the bootloader?
As for downgrading firmware, the same caveats and warnings still apply. Due to changes in the bootloader included with 4.4.2, under certain circumstances when trying to downgrade from 4.4.2 to 4.4 or lower, you could either brick your phone, or set it up to brick in the future when you take an upgrade. So it is suggested you just stick with what is on your phone once you get on 4.4.2.
Can flash a 3rd party or custom rom?
If you want to flash a Non-Motorola ROM on your phone, say something like CyanogenMod, you MUST have an unlocked bootloader.
Can you just tell me how to root my Moto X phone?(sorry, this might be the long answer, but hopefully it will help you understand what I'm saying and why..)
SlapMyMoto can be used to root, and MotoWpNoMo can be used to disable write protection *IF* your phone is on 4.4 or lower.
MotoWpNoMo (which disables write protection) is needed because when Write Protection is enabled (the phone's default state with locked bootloader, or the state you are in after you take the 4.4.2 OTA), any changes made to /system, or the like, (including, but not limited to, App installs, file modifications, deletions, renames, etc) are not permanent and are lost at power off/on. Even if you have root, but lost Write Protection, any apps you've installed that need to write to system can't permanently save their changes (you have to re-do every time your phone powers off/on), and any Root type app, or app that gets installed to /system after WP is enabled will be lost at power off/on.
If you are on 4.4. and use SlapMyMoto/MotoWpNoMo, but later take the OTA to 4.4.2, you might keep root but Write Protection will be re-enabled with no way to disable it.
Due to fixes and changes in 4.4.2, the Root and Disable Write Protection processes that worked on 4.4 and lower, no longer work on 4.4.2. And don't expect anything for 4.4.2 for a while, if ever. So if the phone you buy comes with 4.4.2 pre-installed, or you have taken the 4.4.2 OTA update, and you have a locked bootloader you're stuck!!
This is not an issue if you have an unlocked bootloader. You can still unlock your bootloader (which disables write protection), and root (by just using a custom recovery and flashing SuperSU) no matter what rom is on your phone.
In conclusion...
If you really need ROOT, Write Protection Disabled, want to modify/replace/delete system files, the ability to tether on an unlimited data plan, flash a custom rom (like CyanogenMod or others) then you really should consider getting the Developer Edition X, as you can unlock its bootloader (without voiding warranty), root it (no matter what rom is on the phone), and do what you want.
If your carrier allows Moto to give you the code to unlock the bootloader, then you just have to weight the option of being able to order your phone customized (moto maker) and unlock the bootloader while voiding the warranty, or have an uncustomized phone that the warranty remains intact should you unlock the bootloader.
Click to expand...
Click to collapse
Question. Do you need a custom recovery to root? Can you root the Dev edition with stock recovery? I had a locked edition before and rooted it using the exploit method. Now i'm contemplating a Dev edition but don't want to use a custom recovery to root it.
Slim706 said:
Question. Do you need a custom recovery to root? Can you root the Dev edition with stock recovery? I had a locked edition before and rooted it using the exploit method. Now i'm contemplating a Dev edition but don't want to use a custom recovery to root it.
Click to expand...
Click to collapse
You must root via custom recovery. But after you are rooted, you can flash stock recovery back on if you wish and remain rooted.
I just got my Moto X in India and it bears the model number XT1052, it is the officially available model in India.
But, I saw no mention of this on XDA anywhere, so also I wasn't able to find any root methods for it. Can you suggest anything?
krazzyvishal said:
I just got my Moto X in India and it bears the model number XT1052, it is the officially available model in India.
But, I saw no mention of this on XDA anywhere, so also I wasn't able to find any root methods for it. Can you suggest anything?
Click to expand...
Click to collapse
Root methods are all the same....one way for locked bootloader and one way for unlocked bootloaders.
Read the complete moto x guide stickied in the general section for how to. ?
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
Here,
http://forum.xda-developers.com/showthread.php?t=2603358
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
So, no one knows why downgrading bricks the device? I mean, I know it's because of the bootloader mismatch.....but that's unlocked so why is it being bricked? It seems "unlocked" is not really unlocked....I tried searching, is this efuse that's bricking the phone? If so, WTF? Why would they make something that destroys your phone?
Arak-Nafein said:
So, no one knows why downgrading bricks the device? I mean, I know it's because of the bootloader mismatch.....but that's unlocked so why is it being bricked? It seems "unlocked" is not really unlocked....I tried searching, is this efuse that's bricking the phone? If so, WTF? Why would they make something that destroys your phone?
Click to expand...
Click to collapse
Its just how it is. These aren't nexus phones. They made the 4.4.2 bootloader in a way that if you downgrage, then most commonly try to upgrade again...by ota for sure anyway, boom. Brick.. I'm sure it wasnt made that way intentionally. Personally I just think phone companies just don't care or support what we do. So they don't create anything thinking in terms of rooting and flashing this or that. Its not their concern....since 98 percent of their customers update their unmodified phones over ota and thats it.
Have to remember we're an extremely small percentage of phone users. They aren't even thinking of us when they make stuff. ?
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
kj2112 said:
Its just how it is. These aren't nexus phones. They made the 4.4.2 bootloader in a way that if you downgrage, then most commonly try to upgrade again...by ota for sure anyway, boom. Brick.. I'm sure it wasnt made that way intentionally. Personally I just think phone companies just don't care or support what we do. So they don't create anything thinking in terms of rooting and flashing this or that. Its not their concern....since 98 percent of their customers update their unmodified phones over ota and thats it.
Have to remember we're an extremely small percentage of phone users. They aren't even thinking of us when they make stuff. ?
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Click to expand...
Click to collapse
Yet, they made the developer edition.
I know this isn't a nexus device, but I was expecting nexus-like functionality with the dev edition bootloader unlocked, I know this is not the case now. (Although, you get most of the functionality)
Well, they make a "developer edition" that bricks when you try to downgrade. That seems counter-intuitive.
That's why I'm trying to find the technical details of what causes the brick. Why does it brick? What are they trying to protect? The boot partition? I don't understand the whole point of it or why it happens. Why make a developer edition if it gets bricked like a non-dev edition when flashing? This may have been already answered when the first dev phones came out, but I missed that train. I only upgrade my phone every 2 years or so and this is my first "dev edition" so it's all new to me. I've done a bit of reading, but nothing explicitly states what's cause the brick, just that "it happens". What's causing it?
My main reason for asking is just because I'm curious & would like to understand.
The second is, I'm wondering what happens when we stop getting updates. Will we be stuck on the last version of Android that is given to us?
Arak-Nafein said:
I know this isn't a nexus device, but I was expecting nexus-like functionality with the dev edition bootloader unlocked, I know this is not the case now.
Well, they make a "developer edition" that bricks when you try to downgrade. That seems counter-intuitive.
That's why I'm trying to find the technical details of what causes the brick. Why does it brick? What are they trying to protect? The boot partition? I don't understand the whole point of it or why it happens.
Click to expand...
Click to collapse
I doubt they meant it to be that way....it just turned out that way. And again, I doubt they care. Dev editions are just made to make more money. And keep up to competitors who make them. You keep your warranty, but other than that....nothing is special about them. ?
Why it works that way? Dunno. Lol
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Arak-Nafein said:
Yet, they made the developer edition.
I know this isn't a nexus device, but I was expecting nexus-like functionality with the dev edition bootloader unlocked, I know this is not the case now. (Although, you get most of the functionality)
Well, they make a "developer edition" that bricks when you try to downgrade. That seems counter-intuitive.
That's why I'm trying to find the technical details of what causes the brick. Why does it brick? What are they trying to protect? The boot partition? I don't understand the whole point of it or why it happens. Why make a developer edition if it gets bricked like a non-dev edition when flashing? This may have been already answered when the first dev phones came out, but I missed that train. I only upgrade my phone every 2 years or so and this is my first "dev edition" so it's all new to me. I've done a bit of reading, but nothing explicitly states what's cause the brick, just that "it happens". What's causing it?
My main reason for asking is just because I'm curious & would like to understand.
The second is, I'm wondering what happens when we stop getting updates. Will we be stuck on the last version of Android that is given to us?
Click to expand...
Click to collapse
You have to keep in mind, other than unlocking the bootloader, and Moto Maker customizations, the Developer Edition is the same as the "retail" edition phones except that you can get the unlock code from Moto for free without voiding your warranty and are stuck with the black front, woven white back, and silver accents.
Order a Verizon X via Moto Maker, its an XT1060, order a Dev Edition for Verizon its an XT1060, and they use the same Rom/SBF/FXZ files. GSM side, the "Unlocked GSM" model that comes with a T-Mobile SIM is an XT1053, a GSM Dev Edition is a XT1053, and again, they use the same rom/sbf/fxz. Did moto do this to "save cost" maybe?
The Dev Editions are unlocked just enough to allow you to flash stuff not signed by Moto. That is it. Moto makes no promises that you can successfully downgrade, or anything. If you have a Dev Edition and brick it, its covered under warranty.
As for why it works this way, only Moto knows. We can only speculate, guess and such, which was done in a big long thread that has since disappeared (not sure why it disappeared). Beyond that, we can only relay the cautions we know of, and tell you how it works based on the experience of several people. I'm sorry if that is not enough. If you want the real answer, you'l have to call Moto directly, or see if you can post on G+ tagging some of the Moto people, but they likely wont tell you.
I can tell you this.. My Moto Xoom was unlocked, needed no code to do so, and was virtually "un-brickable." The X does not work that same way. I can only GUESS why. (carrier request maybe? something else?)
KidJoe said:
You have to keep in mind, other than unlocking the bootloader, and Moto Maker customizations, the Developer Edition is the same as the "retail" edition phones except that you can get the unlock code from Moto for free without voiding your warranty and are stuck with the black front, woven white back, and silver accents.
Order a Verizon X via Moto Maker, its an XT1060, order a Dev Edition for Verizon its an XT1060, and they use the same Rom/SBF/FXZ files. GSM side, the "Unlocked GSM" model that comes with a T-Mobile SIM is an XT1053, a GSM Dev Edition is a XT1053, and again, they use the same rom/sbf/fxz. Did moto do this to "save cost" maybe?
The Dev Editions are unlocked just enough to allow you to flash stuff not signed by Moto. That is it. Moto makes no promises that you can successfully downgrade, or anything. If you have a Dev Edition and brick it, its covered under warranty.
As for why it works this way, only Moto knows. We can only speculate, guess and such, which was done in a big long thread that has since disappeared (not sure why it disappeared). Beyond that, we can only relay the cautions we know of, and tell you how it works based on the experience of several people. I'm sorry if that is not enough. If you want the real answer, you'l have to call Moto directly, or see if you can post on G+ tagging some of the Moto people, but they likely wont tell you.
I can tell you this.. My Moto Xoom was unlocked, needed no code to do so, and was virtually "un-brickable." The X does not work that same way. I can only GUESS why. (carrier request maybe? something else?)
Click to expand...
Click to collapse
Argh, so frustrating! Now I REALLY wanna see that thread. XDA isn't archived on the wayback machine is it?
Arak-Nafein said:
Argh, so frustrating! Now I REALLY wanna see that thread. XDA isn't archived on the wayback machine is it?
Click to expand...
Click to collapse
the thread was cached in google at one point, now its not, it only comes up with link to XDA but when you click on it, XDA says the thread does not exist.
See the OP here -> http://forum.xda-developers.com/moto-x/moto-x-qa/informative-thread-t2658742
People that REALLY love flashing and tinkering.....need a nexus. Bottom line. Nothing else compares....today anyway.
As much as I LOVED my X....this is why my wife has it now and i have the N5.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
kj2112 said:
People that REALLY love flashing and tinkering.....need a nexus. Bottom line. Nothing else compares....today anyway.
As much as I LOVED my X....this is why my wife has it now and i have the N5.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Click to expand...
Click to collapse
If Verizon would allow it I would have already done it.
I did some more reading, it appears it all comes from motoboot.img(motoboot partition) & gpt.bin("partition" partition). As long as you don't mess with those & their respective partitions you shouldn't have to worry about bricking your phone. You can still access & read/write the boot partition & the system partition & everything else when unlocked. The OTAs will modify these (And check for certain versions of these) which can leave you in a nasty catch-22 situation & thus the brick. It's not the actual downgrade that bricks it, it's the security from the OTAs that error out & leave you stranded. You can still flash the OTA if you do it manually & leave out the bootloader stuff.(EDIT: This isn't entirely true) You can flash any other ROM because they don't have the built in security like the OTAs. So, if you flip over to an AOSP or CM ROM or anything not based on Motos stuff you needn't worry about nazi bootloaders & OTAs bricking your device. The only problem with going to those ROMs is the loss of Active Display & Touchless control. I'm guess Moto isn't releasing anything on the X8?
Does this sound correct? That's what I've collected from my readings. Feel free to correct me.
Arak-Nafein said:
If Verizon would allow it I would have already done it.
I did some more reading, it appears it all comes from motoboot.img & gpt.bin. As long as you don't mess with those & their respective partitions you shouldn't have to worry about bricking your phone.
Click to expand...
Click to collapse
I've said before....and I stand by it. Downgrading from 4.4.2 on any moto x is like playing russian roulette. And I simply say, don't. Lol
But.....its each person's phone and they can do what they want with it. ?
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
kj2112 said:
I've said before....and I stand by it. Downgrading from 4.4.2 on any moto x is like playing russian roulette. And I simply say, don't. Lol
But.....its each person's phone and they can do what they want with it. ��
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Click to expand...
Click to collapse
That kinda came out wrong and I've tried to edit my post to better explain it.
The motoboot.img & the gpt.bin go together. For example, if you are on 4.4, you can manually flash all the parts except the motoboo.img & gpt.bin from 4.4.2 and it will work, and you'll retain the dowgradability of 4.4. But, you're setting yourself up for disaster should you accept an OTA (Which will be looking for the updated motoboot.img & gpt.bin. gpt.bin will be updated, but the bootloader will fail. This leaves you with a mismatched motoboot.img & gpt.bin and boom brick on next restart.)
You're right tho, it's best not to play with that. Unless you disable Motos OTA & treat it like a ROM that you have to return to stock before taking an OTA.
The bootloader is unlocked....but Motorola's software has built-in checks that only allow it to overwrite a specific version (cumulative changes?).
At least, that's the way I understand it. I'm probably way wrong here.
[Disclaimer-this is my first android device, thus i will be a total newbie at this stuff, second, this is my second time posting on a forum-type website so excuse me if this has already been asked and answered, plz just link the thread then]
So. Is this possible?
Detailed explanations would be much appreciated.
(I am also using a MAC, so if that affects anything....)
How about looking around a little bit. Come on man
uncalex said:
[Disclaimer-this is my first android device, thus i will be a total newbie at this stuff, second, this is my second time posting on a forum-type website so excuse me if this has already been asked and answered, plz just link the thread then]
So. Is this possible?
Detailed explanations would be much appreciated.
(I am also using a MAC, so if that affects anything....)
Click to expand...
Click to collapse
The Moto X have locked bootloader that prevent you from making changes to the "system" partition. So generally you need to unlock the bootloader first, which is a separate process.
Just a note, that generally when you unlock a phone's bootloader, you void the warranty. Some person here claimed that a Motorola manager confirmed with him that you will not void it with the Moto X Pure edition, however, I do not believe it. The best thing to do is read the fine print and warnings when you goes to unlocked your bootloader from Motorola website.
Another warning, is it easier to permanently brick a Motorola than a some other phones if you flash things incorrectly, such as corrupting the CID partition. With the Moto X 2013 it is possible to brick the phone by downgrading the phone to a too old version. I have never tried this with Moto X, but with Nexus devices, you could softbrick the phone if you root it and then do an over the air update, it generally required to use TWRP recovery to apply the over the air update zip for it to work, or reflash the "system" partition of the phone to stock before doing the update. I don't know if this is the same for the Moto X, but I would take the same precaution.
To unlock the bootloader, you can do it at the website here: https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth. Read through this guide to help you: http://forum.xda-developers.com/moto-x-2014/general/guide-unlock-bootloader-moto-x-2014-t2876773
For step 2 and 3 from that guide, it linked to files required by Windows. Instead, you can get the Moto X driver for Mac here: https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/94931/p/30,6720,8696
You will also need "fastboot" and "mfastboot" for Mac. Fastboot is the program used to lock/unlock bootloader and flash images for (stock based) Android phones. The ADB/Fastboot link in my signature have the mac/linux/windows version included (adb_fastboot.zip file). I think you only need to use the regular fastboot to unlock the phone, but to flash the phone images you will need mfastboot.
To root the phone, check in the Development sections of this device forum: http://forum.xda-developers.com/moto-x-2014
Also, you DO NOT need to unlock the phone bootloader to reflash the factory images.
eksasol said:
For rooting the Moto X it is a bit difficult compared to the Nexus. You need to realize that the Moto X have locked bootloader that prevent you from making changes to the "system" partition. So generally you need to unlock the bootloader first, which is a separate process.
Just a note, that generally when you unlock a phone's bootloader, you void the warranty. Some person here claimed that a Motorola manager confirmed with him that you will not void it with the Moto X Pure edition, however, I do not believe it. The best thing to do is read the fine print and warnings when you goes to unlocked your bootloader from Motorola website.
Another warning, is it easier to permanently (hardware) brick a Motorola than a some other phones if you flash things incorrectly, such as corrupting the CID partition. When I had the Moto X 2013 version, it is possible to brick the phone by downgrading the phone to an older version. I have never tried this with Moto X, but with Nexus devices, you could softbrick the phone if you root it and then do an over the air update, it generally required to use TWRP recovery to apply the over the air update patch for it to work, or reflash the "system" partition of the phone to stock before doing the update. I don't know if this is the same for the Moto X, but I would take the same precaution.
To unlock the bootloader, you can do it at the website here: https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth. Read through this guide to help you: http://forum.xda-developers.com/moto-x-2014/general/guide-unlock-bootloader-moto-x-2014-t2876773
For step 2 and 3 from that guide, it linked to files required by Windows. Instead, you can get the Moto X driver for Mac here: https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/94931/p/30,6720,8696
You will also need "fastboot" and "mfastboot" for Mac. Fastboot is the program used to lock/unlock bootloader and flash images for (stock based) Android phones. The ADB/Fastboot link in my signature have the mac/linux/windows version included (adb_fastboot.zip file). I think you only need to use the regular fastboot to unlock the phone, but to flash the phone image you will need mfastboot.
To root the phone, check in the Development sections of this device forum: http://forum.xda-developers.com/moto-x-2014
Also, you DO NOT need to unlock the phone bootloader to reflash the factory image of the phone.
Click to expand...
Click to collapse
Thank you for being so nice and providing this information
eksasol said:
The Moto X have locked bootloader that prevent you from making changes to the "system" partition. So generally you need to unlock the bootloader first, which is a separate process.
Just a note, that generally when you unlock a phone's bootloader, you void the warranty. Some person here claimed that a Motorola manager confirmed with him that you will not void it with the Moto X Pure edition, however, I do not believe it. The best thing to do is read the fine print and warnings when you goes to unlocked your bootloader from Motorola website.
Another warning, is it easier to permanently brick a Motorola than a some other phones if you flash things incorrectly, such as corrupting the CID partition. With the Moto X 2013 it is possible to brick the phone by downgrading the phone to a too old version. I have never tried this with Moto X, but with Nexus devices, you could softbrick the phone if you root it and then do an over the air update, it generally required to use TWRP recovery to apply the over the air update zip for it to work, or reflash the "system" partition of the phone to stock before doing the update. I don't know if this is the same for the Moto X, but I would take the same precaution.
To unlock the bootloader, you can do it at the website here: https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth. Read through this guide to help you: http://forum.xda-developers.com/moto-x-2014/general/guide-unlock-bootloader-moto-x-2014-t2876773
For step 2 and 3 from that guide, it linked to files required by Windows. Instead, you can get the Moto X driver for Mac here: https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/94931/p/30,6720,8696
You will also need "fastboot" and "mfastboot" for Mac. Fastboot is the program used to lock/unlock bootloader and flash images for (stock based) Android phones. The ADB/Fastboot link in my signature have the mac/linux/windows version included (adb_fastboot.zip file). I think you only need to use the regular fastboot to unlock the phone, but to flash the phone images you will need mfastboot.
To root the phone, check in the Development sections of this device forum: http://forum.xda-developers.com/moto-x-2014
Also, you DO NOT need to unlock the phone bootloader to reflash the factory images.
Click to expand...
Click to collapse
Quick question,
I've seen people use towelroot to root any android device. Will towelroot work with the Moto X? I'm just really hesitant now since you said it was easier to permanently brick and Moto device.
uncalex said:
Quick question,
I've seen people use towelroot to root any android device. Will towelroot work with the Moto X? I'm just really hesitant now since you said it was easier to permanently brick and Moto device.
Click to expand...
Click to collapse
I never use that. The safest thing is to do what is tested and available for that device, so use the current available method here:
http://forum.xda-developers.com/mot...e-edition-superboot-style-root-motox-t2889264
Generally. I don't do any of these, because I do the default Nexus root method which is:
1. Unlocking bootloader
2. Flash TWRP recovery: fastboot flash recovery twrp.img (not yet available for this phone, but soon will be, check the development sections.)
3. Then copy the Chainfire's SuperSU.zip (link in my signature) into the phone and flash while in TWRP recovery.
You shouldn't worry about bricking the device provided if you don't mess around, just stick with rooting and flashing factory firmware if you are new. As long as you don't flash a rom / firmware made for a different phone, or mess with the CID partition or something like that. Or downgrading the firmware after you've already update, which should be fine with a Nexus, but it did kill some Moto X when they downgraded to a firmware that is too old.
If you ever run into issues, you can flash the factory firmware, which is not available yet, but will eventually show up here: http://sbf.droid-developers.org/phone.php?device=37
You will have to download the correct version since there are different variations, but flashing incorrect ones should not brick your device. You can use these instruction to flash the firmware, this is for the Moto G, but the steps are the same: http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657. After you install stock firmware, depend on if you were having issues, you can access the phone's Recovery and do a factory reset, this will wipe all your data, but also clear all the settings which may be required for the phone to boot correctly.
Normally, if your phone is rooted, when you received an over the air update, the first thing I would do before applying that update is to flash the system.img and recovery.img partition of the device back to stock, this will ensure the OTA gets updated successfully, afterward you can re-root the phone. Some people avoid this and flash the OTA's zip file using TWRP recovery, but it is not the official way and not guarantee to work all the time.