Hi all,
When I get a notification of a meeting on the watch, it shows the name of the meeting, but doesn't show the location.
Is there any way to get it to show the location too?
I end up having to pull my phone out of my pocket anyway to see which room I need to go to.
Cheers,
Rich
Related
hey guys is there anyway to set it up where my phone only downloads my emails during set hours? i'm sick of waking up in the middle of the night cuz i just inherited $5 million dollars from my long lost ancestor in nigeria....
in active sync you can change the time interval and time to connect like 10 til 18.00 rest by hand
hey, sorry but i still dont get it. you mean i should go to activesync on my comp while my phone is connected? i did that and didnt see any settings for limiting the number of hours my phone downloads emails... please clairify. thanks
omar
One thing I do so it doesn't wake me up at night is disable the notifications. I just remember to check my mail during the day. I don't need to get buzz/alarm each time a mail comes in. If you want to try this do the following:
Start -> Settings -> Sounds & Notifications -> Notifications
From the drop down tab select "Messaging: New e-mail message" and you can set the type of alarm you get. I just disable everything.
If you're using Active Sync to sync you mail (I don't, I use IMAP) you can setup a schedule as the previous post states. Just go to ActiveSync, click on Menu and there's an option for Schedule.
I understand your frustrations with this, but rather than limiting the download, why not limit the notifications. What I found and installed was PhoneWeaver from SBSH.net. This is an automatic profile changer. With this you can specify when and what notifications are set and how loud they are. For me, I have it set to be on vibrate while during work hours, silent at night, and full ring all the rest of the time. For me, this works great.
Hope this helps.
Good suggestions, thanks. I have a 17 year old son that goes out on the weekends and I want to have my phone ring if he needs me. But I have three email accounts and several google notifications that send me a lot of emails. Middle of the night waking up to an email blows.
When I travel, I have been just putting the Kaiser into flight mode, but that doesn't let my wife phone me during an emergency. So, disabling notification before I go to bed in those situations makes a lot of sense.
I have the T-Mobile(UK) version of the Diamond & I am experiencing many issues with it.
I had the Vario II before and never had a problem with it but this is driving me nuts at times.
I love the phone but the issues I am experiencing are spoiling it.
The issues include...
1. When phone has been charging if you turn it on from standby the screen comes up but is frozen. Holding off button does not work, the only way to turn it off is to remove the battery. I have also had it freeze with the screen black.
2. The phone vibrates & continues to do so, again only removing the battery will stop it.
3. Ring tone does not start until a short while after a call comes through.
4. Lower part of handset gets extremely hot whilst in use.
5. I have NTL mail set up & it continuously shows 1 unread email message. I have recieved hundreds of emails since and read them all but the 1 unread message logo on home screen & text on bottom of screen in NTL mail remains even if inbox is empty. Didnt want to 'Clear NTL mail' as I want to keep my sent messages etc.
6. Type assist thing is extremely annoying & I dont seem to be able to permanently turn it off! I write something then put a full stop, question mark etc and press enter or space and it puts it at the beginning of the word, not after where it should be.
7. Changed keypad layout but still remains as big QWERTY.
8. Intermittently all my contacts vanish & the numbers in my call history have lost their name tags.
9. Just noticed all my 'Favourite people tags' have disappeared
10. Also the finish is rubbing off the back cover even though I am very carful with it and mainly keep it in my suit pocket. Had my Vario II for 18 months and it still looks like new.
11. Many other issues but cant remember them all at the moment.
I have not altered any of the software and am not very technical so please keep any replies very basic.
I have had the phone about 3 months, how do I go on with returning it under warranty if there is no easy fix?
Thanks
Rich
5. I have NTL mail set up & it continuously shows 1 unread email message. I have recieved hundreds of emails since and read them all but the 1 unread message logo on home screen & text on bottom of screen in NTL mail remains even if inbox is empty. Didnt want to 'Clear NTL mail' as I want to keep my sent messages etc.
Click to expand...
Click to collapse
This can be resolved by going to your inbox, then click "inbox" in the top left and goto "Outlook E-mail" where there is a welcome message. Delete that and you should be ok.
Regarding the other problems you might need to upgrade your ROM, theres plenty of info in the Diamond ROM development section on that.
Unfortunately that does not work. The unread message is showing in my NTL world inbox, you go into the inbox and there is nothing there! It even says '1 unread message' along the bottom of the screen even though the inbox is empty
How do you upgrade the ROM? Will it affect the warranty?
Just tried the Clear "NTL World" option in tools as a last resort but its still there!
Re-posting this as i think it'll get more valid attention in this forum.
If this is completely the wrong forum, please remove it. I just think it'll get more discussion here, with developers.
I use my phone as my alarm clock. I keep it charging on my bedside table. I do not have a house/land-line so this is my only option for communication.
It would be nice if at night, when I'm sleeping, i can set my phone (via app or setting) to a "do not disturb" type state.
In this state, i would basically like all phone calls routed to a special voice mail, that will state to the caller that i am unavailable, and to leave a message. However if it is an emergency, give the caller an option to bypass the do not disturb state and actually ring my phone.
Same with Text Messages. I would like all text messages intercepted, and responded to via text in the same fashion, with the same option for the caller to bypass the do not disturb state and actually ring/notify me of the call/text etc.
And of course, put all other notifications to silent mode etc.
Then in the morning, i can check all notifications, phone, text etc, and see what i missed.
I hope i explained this well enough.
I would like to be able to sleep without interruption, but if something important happens, or an emergency happens, i can still be gotten a hold of.
Sounds like you want either Bedside or Tasker.
bcpk said:
Sounds like you want either Bedside or Tasker.
Click to expand...
Click to collapse
Yeah, those are close to what i want.... but a lil bit more functionality, in letting the caller decide if its important enough to bypass the do not disturb status....
But one of these apps might do if i cant find one that has those features, or someone can create one. =)
Thank you for the suggestions tho.
Tasker can disable silent mode on receipt of a codeword in an SMS
ie make your voicemail "blah blah send an SMS starting with 'EMERGENCY', all caps, if you MUST reach me"
then when Tasker gets that it will turn off silent mode and they can ring again, or you could just get Tasker to squawk when an EMERGENCY text message comes through, and you can ring them back.
stshannon said:
but a lil bit more functionality, in letting the caller decide if its important enough to bypass the do not disturb status...
Click to expand...
Click to collapse
So you want the app to disturb you so that you can say allow or cancel? Why not just set it to vibrant then?
@stshannon: the reference to using TASKER is probably your best bet for now. Until a more dedicated application comes along to do what you need.
Have you heard of or used Tasker?
It has unlimited capabilities.
sounds like a nice request for google voice since they already have a do not disturb, they could add a "press 1 if someone is dying to interrupt this persons beauty rest"
bcpk said:
Tasker can disable silent mode on receipt of a codeword in an SMS
ie make your voicemail "blah blah send an SMS starting with 'EMERGENCY', all caps, if you MUST reach me"
then when Tasker gets that it will turn off silent mode and they can ring again, or you could just get Tasker to squawk when an EMERGENCY text message comes through, and you can ring them back.
Click to expand...
Click to collapse
OrganizedFellow said:
@stshannon: the reference to using TASKER is probably your best bet for now. Until a more dedicated application comes along to do what you need.
Have you heard of or used Tasker?
It has unlimited capabilities.
Click to expand...
Click to collapse
Hmmm, i might have to take a closer look at Tasker then, it sounds to be the closest.
Blueman101 said:
So you want the app to disturb you so that you can say allow or cancel? Why not just set it to vibrant then?
Click to expand...
Click to collapse
No, i want the system to give the option to the caller/texter if it is an emergency or not, and if so, bypass do not disturb. But it sounds like Tasker may be very very close in functionality to what i need. Ill take a closer look at that.
Thanks to those that responded.
This article has the basics of how to activate your phone by SMS http://lifehacker.com/5611003/build-a-find-my-iphone-clone-for-android
hey developers!!
Can we get a calendar that can have our notes and email's pinned to it.
so if i open the (month)calendar... i can go to a date.. And see my notes and emails (as a note?) that i have chosen to pin there.
I get a lot of ... "What were you doing on the 16th?" questions.
no not cops... my boss works out of a day timer paper booklet. (mileage reports etc)
but E agenda's dont let me work freely from month view down.
I'd like to make a note or get an email and be able to have it as a "options selection"
or am I weird to want to track everything from 1 calendar.
Hello guys,
I was looking for kids mode like the one from Samsung. Unfortunately my kid's phone is not samsung and i wasnt able to port the application to work on Sony Device.
The main reason for this is that they had a Dialer application for kids which shows no phone number but ONLY the name of the mother/father contacts while calling. I want to use this function to make the phone more secure in case is stolen or robbed. As well it offers to block any other incoming calls except the selected ones.
@ktmom suggested me to try with a Tasker. I've never been experience a similar software for this kind of things.
Could you please gimme some advices or help regarding my needs and suggest me from where to start.
Thanks in advance.
Hi Ho [emoji16]
The plan I would start with is to create a shortcut on the desktop or a notification with call mom (or dad) buttons. Then use tasker to directly dial the numbers (as variables) without having them entered into the phone's contacts.
The trick is the dialer history will keep a history of called numbers, but I think that can be deleted; though we may need one or two plugins to tasker to achieve that reliably.
If this is in line with your goals, then I'll be happy to create a task or two to handle this that you can import. That is easier than teething to develop it yourself as a beginner.
I'm at the airport waiting for my daughter's flight, but let me know if this will work, or any ideas you have.
Sure, let's do it like that with your help. And in the process of developing we can sharpen it.
BTW thank you so much for your help and patience. I do really appreciate your help. ????
I actually just got home. Is there a timeframe for this? I'm thinking Christmas or similar. Otherwise I'll spend some time this weekend to come up with something for you.
This is just a basic set of tasks to create quick dialers to Mom and Dad, without needing the numbers to have been entered into the contacts app.
One task, "create shortcuts", sets two of Tasker's quick setting tiles. One will call Dad, the other will call Mom. The use of the quick settings tiles should help prevent accidental calls and still be convenient.
After importing the linked project, go to the device's quick settings editor and drag the first two Tasker tiles into the active area. The tasks won't actually appear set to the tiles until they are in the active area.
The task, "create shortcuts" should run on import of this project, performing the configuration mentioned above; associating the tiles with the "call mom" and "call dad" tasks.
The icons are set in the respective "call mom" or "call dad" task. To change the icon, enter the task then tap the icon at the bottom and select a new one. The "create shortcuts" task may need to be run again (manually) to update the tile's icon.
You must go to the "dialer" task and edit the value in the "To" field within the first two actions to the appropriate phone numbers.
The left facing arrow at the top left of the screen exits out of the task and saves the changes. You should also make a habit of tapping the checkmark [emoji736] at the top of the screen after saving a task, which saves the changes to Tasker. That checkmark is available only when there are changes to be saved.
This is just a start, hoping to get feedback if this is the right direction for you.
Import Kids Phone project.
Hey,
thanks a lot for the time you spent for this.
I've tested it and it calls with no issues.
Now we have to make the phone numbers to disappear. Can we put a fixed custom title? This is because it uses the name written in the contact list.
BTW is there an option to drop an icon on the desktop of the phone?
Thanks again for your great help!
IMalchev said:
Hey,
thanks a lot for the time you spent for this.
I've tested it and it calls with no issues.
Now we have to make the phone numbers to disappear. Can we put a fixed custom title? This is because it uses the name written in the contact list.
BTW is there an option to drop an icon on the desktop of the phone?
Thanks again for your great help!
Click to expand...
Click to collapse
Yes, we can create a desktop shortcut. Instead of the tiles?
What do you mean "it uses the name in the contact list"? Do you mean in the call history?
I meant that when I run the call from the tasker it uses the name from the contact book/history. This is not big issue, but it just wondering if it's possible.
Thank you
IMalchev said:
I meant that when I run the call from the tasker it uses the name from the contact book/history. This is not big issue, but it just wondering if it's possible.
Thank you
Click to expand...
Click to collapse
That is the relationship the phone app has with the contact app. You have to remove the names from the contact app.
I'm confused. I thought the goal here is to obfuscate the phone numbers so if the phone is picked up by a "stranger", the numbers are not evident.
If I was, for example, a stalker, and I took the child's phone to get phone numbers, the first place I would look is in the contacts app. The second place is in the call log. Can you help me understand what is and isn't necessary here.
To create the task to remove the call's history from the history, I have to sort out the contentrovider structure for the phone database. I've explored the text messaging DB, but I need to be on my computer to find the phone DB structure.