Related
After installing Vanir, I don't know what went wrong !!! it was freezing then after trying to charge it, it bricked!!!!
I searched the forume and found major two ways
FIRST
RuedasLucas Here :
http://forum.xda-developers.com/showthread.php?t=1932123
i followed the info. correctly and stuck in the same problem the man in the thread have, I am stuck in LG logo
so i tied the second
http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9&nocache=1
and i am stuck in installing " LGmobile Support Tool " because i am in windows 8 and it is not compitable with it. every time trying to install it seems not responding.
so i am stuck now and donot know how to unbrick it !!! no one tell me to set up win 7 because i donot have one
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
SimonTS said:
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
Click to expand...
Click to collapse
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
kessaras said:
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
Click to expand...
Click to collapse
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
SimonTS said:
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
Click to expand...
Click to collapse
Ok is the tool take some time to load if internet connection is not good ?!!
arrivals18 said:
Ok is the tool take some time to load if internet connection is not good ?!!
Click to expand...
Click to collapse
It shouldn't make any real difference, no.
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
arrivals18 said:
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
Click to expand...
Click to collapse
mmmmmm.... if at the end u cant do anything and since, propably, your bootloader is unlocked , u can reinstall the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
SimonTS said:
It shouldn't make any real difference, no.
Click to expand...
Click to collapse
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
[email protected] said:
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Yep. every thing ok as u see.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kessaras said:
mmmmmm.... if at the end u cant do anything and since, probably, your bootloader is unlocked , u can re-install the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
Click to expand...
Click to collapse
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
Click to expand...
Click to collapse
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Click to expand...
Click to collapse
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
RuedasLocas said:
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
Click to expand...
Click to collapse
OK look what i did :
1- connect device with usb cable and holding vol- till it get s/w update
2-when pressing adb reboot bootloader command it gives me unknown error
3- fastboot oem unlock : it gives me device not found
Also tried :
1- connect device to usb cable with holding power+ vol+ to recover mode
2-when pressing adb reboot bootloader command its ok
3- fastboot oem unlock : it gives me FAILED (command write failed (Unknown error))
finished. total time: 0.587s
SimonTS said:
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
Click to expand...
Click to collapse
HOW ?!!!!!!!!
when pressing power with vol+ it gives me the message " This mode is for data backup at service center. After removing and reattachment of battery press power key to reboot and keep using phone" so what how can wipe date/factory reset ?
Power and vol-, not+
Flying_Bear said:
Power and vol-, not+
Click to expand...
Click to collapse
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
arrivals18 said:
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
Click to expand...
Click to collapse
i told you earlier at my post here , that you dont need to flash kdz and go back to stock if ur final goal is a custom rom. u could reinstall recovery using adb bootloader. nevermind -_- u just do things harder for u. bootloader is unlocked u cant unlock the unlocked. bootloader isnt locking again when u just force the stock rom in. there is another procedure u must do to lock it. u can install recovery ( if u havent ) and just install a custom rom
EDIT: you dont need this anymore but ill explain.
adb is used to force files into the device. its a way to communicate with the phone using the pc. u can use the adb to install whatever u like but if u are not sure that the thing u are trying to install is ok for the device, then u will have a problem.
so , since your bootloader is already unlocked, you can go in adb bootloader and force the recovery in.
open cmd:
Lets say i use the teamwin recovery. ill rename it to be easy and save it to desktop. my file is: recovery.zip
open cmd as administrator and go to desktop: cd .....[path to ur desktop]
1. adb start-server
2. adb reboot bootloader
3. fastboot fash recovery recovery.zip
thats it. 3 commands is 10 seconds work. u dont need to go back to stock rom to install a custom rom.
I need your help guys.
I did a mistake and root the phone before i unlocked bootloader of my LG p880.
After i restarted my phone, it got stuck at boot!!
Its gives the following error and turns of in 5 seconds..
[LG-Security] Error: Boot Image Signature!
i can turn my phone in S/W upgrade mode and connect it with pc.
My phone is recognized by the LG support tools but can not be connected.
What can I do now?
mihabite said:
I need your help guys.
I did a mistake and root the phone before i unlocked bootloader of my LG p880.
After i restarted my phone, it got stuck at boot!!
Its gives the following error and turns of in 5 seconds..
[LG-Security] Error: Boot Image Signature!
i can turn my phone in S/W upgrade mode and connect it with pc.
My phone is recognized by the LG support tools but can not be connected.
What can I do now?
Click to expand...
Click to collapse
You can search and read as this question is asked five times a week.
SimonTS said:
You can search and read as this question is asked five times a week.
Click to expand...
Click to collapse
i know, but i do not find what to do if KDZ upgrade is not recognize my phone.
mihabite said:
i know, but i do not find what to do if KDZ upgrade is not recognize my phone.
Click to expand...
Click to collapse
usb drivers. is answered again yesterday.
When I first purchased this phone I was able to boot to the default recovery that came with the phone ( which clearly had a *fastboot option*), it came with stock 5.1, and a bunch of bloatware.
I downloaded the one click root method for the h811 which was perhaps the easiest root i've ever done. great. i also had to flash my recovery to twrp 2.8 for some reason.
Rocked out to a newely rooted device on 5.1 until the t mobile bloatware and system update notification kept bugging me, so I said * eff it, i've been holding out for a while*
So I get to the cm 13 wiki for my device, I managed to install the cm recovery ( cant remember how i did this for some reason) and then i was able to flash cm13 to my phone. CM13 is sleek, and smooth but is presenting problems.
First of all, no google play store and the gapps zip wont install through cm recovery ( fails and tells me to use twrp instead which is a problem because i can't boot this phone into fastboot mode)
I am unrooted and can not figure out how to properly root a T mobile h811 running cm13, so the twrp manager doesn't work because it "requires root" then shuts down. ( enable root access in the cm13 developer options does nothing at all and yes, for adb and apps)
FAST BOOT MODE DOES NOT SEEM TO EXIST ANYMORE ON MY PHONE - Following the many tutorials, which goes long the lines of using adb/fastboot, adb devices can see my device, but fastboot devices can't ( figures) because its not in fastboot mode. Any fast boot reboot bootloader or any variant of that command only reboots the phone, to... swipe the screen.
I've installed the lg bridge crap ( which installed an updated usb driver) that doesn't even recognize my phone " no mobile device connected". tried uninstalling and reinstalling, but nothing. When putting the phone in download mode, to see if adb would rcognize it, windows sees this as a new device , installs drivers but says " device can not start, code 10 * in device manager. :silly:
is there anything that can be done?? google searches result in obvious solutions that SHOULD work but don't, or threads where a person coincidentally has the same exact problem as I do, but their response is usually the last response in the thread that goes unanswered
summary : I've install cm13 on my lg g4 h811, I do not have root access, I can not install twrp due to ( no fastboot mode) in effect, i cant install gapps, cant root phone etc..
any help?
did you ever unlock the phone....?
Yes, unlocking the phone is one of the first things you would need to do. In Developer Options > OEM Unlock. Then in bootloader, run the unlock command. This will delete /data and internal storage so back up your files so you can transfer them back via adb or fastboot.
Then you're probably going to need to temp boot TWRP, then flash the TWRP recovery image in TWRP. THEN you can flash properly.
Carefully read through this thread:
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Good luck.
Edit: oh and this thread belongs in Q&A.
Alright. Am I only to read the first post or all 30+ pages? ( not that i have a problem, just curious)
Reeeeaaadd ittt alllll! Just kidding. The first post should be fine. You'll be looking at doing everything after flashing the kdz. If you think you've messed up your partitions, flash the kdz and start over.
aoaleman said:
Reeeeaaadd ittt alllll! Just kidding. The first post should be fine. You'll be looking at doing everything after flashing the kdz. If you think you've messed up your partitions, flash the kdz and start over.
Click to expand...
Click to collapse
"ARE YOU HAVING TROUBLE WITH LGUP NOT SEEING YOUR MOBILE?
Try this....... take the back off your mobile so you can get at the battery. Connect your mobile via USB. Start LGUP, if it does not see your phone DO NOT DISCONECT, DO NOT RESTART OR TURN OFF LGUP. Take out the battery and then put it back in.......let the phone restart on its own. LGUP should now see it."
didn't work, very frustrating. any clues? on windows 8.1 by the way. tried two computers. none can see this phone. I can connect the phone to the computer and see its storage, lg usb driver is installed
You probably need to reinstall the drivers. It might be the fastboot driver. That's what worked for me.
I've reinstalled the official drivers, uninstalled them... Jusst the mobile USB driver, a combo of both, plenty of times. Don't understand why this software doesn't see my phone
Lgup, lgair, lg bridge, lg USB driver (skinned down) .. Nothing works tested on my gaming rig., and work laptop both running win 8.1 64 bit
Hey man next time you have a question just post it in the Q&A section this section is forces android development just wanted to let you know
TacoTuco said:
Hey man next time you have a question just post it in the Q&A section this section is forces android development just wanted to let you know
Click to expand...
Click to collapse
This section does get more views though haha.
Anyway I feel that the 811 is one of the more finicky devices to get into fastboot at least in my experience. I had to enable and disable dev options while plugging and unplugging device and it finally worked. No idea if that'll work for everyone though.
I reasked the question in Q and A. Please help some one.
You start over. LG bridge.
Having the same issue. I'm on Windows 10. What developer settings did you mess with to get it working, tiskewlio?
The issue i seem to be having is that when I put the device in download mode ( didnt know that is the same as fastboot) drivers attempt to install, "LGE MTP USB DEVICE" has a yellow exclamation mark with a code 10-device cannot start error message. I believe this the issue as any fastboot command stuff says " waiting for any device" . must not yet see the mtp driver .. Also noticed the bridge app immeditaley tries to pick up my device in download mode but fails due to this problem..
Any clues?
Sunaj1 said:
The issue i seem to be having is that when I put the device in download mode ( didnt know that is the same as fastboot) drivers attempt to install, "LGE MTP USB DEVICE" has a yellow exclamation mark with a code 10-device cannot start error message. I believe this the issue as any fastboot command stuff says " waiting for any device" . must not yet see the mtp driver .. Also noticed the bridge app immeditaley tries to pick up my device in download mode but fails due to this problem..
Any clues?
Click to expand...
Click to collapse
]
Make sure you are using all these files...
https://drive.google.com/folderview?id=0B_sPus48oLWYQy1MTFRBSlBxMGc&usp=sharing
thevirgonian said:
]
Make sure you are using all these files...
https://drive.google.com/folderview?id=0B_sPus48oLWYQy1MTFRBSlBxMGc&usp=sharing
Click to expand...
Click to collapse
silly question maybe, but is there a specific tutorial in getting this to work with the files provided given my situation? (commands, etc..) will this somehow bypass the the lge mobile mtp device that wont install ? I had installed the system wide adb/fastboot drivers, and already had a folder with just the minimal install of the adb but didnt have a few files in the one you provided ( lg root, busy box, etc) so not quite sure what to do with them.
Again, if possible want to flash twrp recovery to my device but can't due to * waiting for any device* and the ( device cannot start ) error
Thanks
* waiting for device* when putting phone in download mode and pushing fastboot flash twrp-2.8.7.1-h811.img.
Any help would be appreciated as I need to get the driver to work first. see attached picture.
Cha h
the issue is largly resolved as i've been able to flash the recovery and install another rom. But i'd still like to know how to get the download mode driver properly working in the event i need a computer and can't do a self contained install.
Uninstall all drivers. Reboot computer. Reinstall latest drivers and LG bridge. Reboot. Then start your process. It'll work. Trust me. Find my posts in primes stock thread. I ran into this issue myself. And if you get an error after flashing where it won't mount /data, that's because it got corrupted. Once in twrp, format /data then reboot to recovery. All will be well to flash. Just a heads up since that was also a problem.
travisd4est said:
Uninstall all drivers. Reboot computer. Reinstall latest drivers and LG bridge. Reboot. Then start your process. It'll work. Trust me. Find my posts in primes stock thread. I ran into this issue myself. And if you get an error after flashing where it won't mount /data, that's because it got corrupted. Once in twrp, format /data then reboot to recovery. All will be well to flash. Just a heads up since that was also a problem.
Click to expand...
Click to collapse
i dont know man, i did all that a million times over, but recently i was able to just flash the stock MM rom to the device using LGup. Think i'll just stick with stock rom and root for a while as all this stuff is a little finicky at times. Thanks for your help.
Hi I have a problem with my honor 5c so I deleted everything from the phone because I wanted to install custom rom but that didnt worked out and now I dont have system on it and twrp recovery was also deleted I unlocked bootloader but every command i type in fastboot is not working even one for oem status but if I type fastboot devices it shows my device and if I go to huawei erecovery and try to recover it it says getting package info failed and when battery discharge and I put it on charger it says
error mode
attention!
Please update system again.
Error!
Func NO: 10(boot image
Error NO: 2(load image)
I am really pissed off and I dont know what to do someone HELP ME PLEASE.:crying:
Simply u can fix
Preview:
Today I faced this issue,and successfully solved,
Shutdown mobile ,then connect to PC and quickly press volume down button automatically goes to bootloader mode , manually flash system,cust,recovery and boot img
---------- Post added at 01:30 PM ---------- Previous post was at 01:26 PM ----------
Then use Dload method u can fix this issue,
Today I post some posts according to this issue on Facebook,
Honor 5c group india
But as I wrote if I go to fastboot/bootloader I cant type any command on every command it says "command not allowed" even the one for oem status and I cant turn on usb debbuging or oem unlock because I dont have os.
Hey @leoleo333, I did exactly the same thing that you did and had exactly the same problem as a result. I considered myself fairly knowledgeable about Android and Huawei/honor mobiles... I tried everything you can think of and spent months trawling the internet for a solution and was unable to fix it. I posted here on XDA and even the most knowledgeable members were unable to help. You should do a search of my XDA posts relating to this.
That said,I am using my honor 5C right now!:laugh: I didn't realise that my warranty was 24 months,I thought it was 12 months. Hence why I spent so many months trying to fix the problem myself. By chance I found out I still had warranty and sent it to the repair centre. It was so easy and straight forward and in a matter of days they had fixed and returned my beloved mobile. I even had a slight defect on the screen as a result of falling over and they even repaired that free of charge!
All I can say is that I hope and pray you have warranty :fingers-crossed: or you can kiss your mobile goodbye. Sorry. Please do let me know if you fix it yourself though, I'd be really interested to know where I went wrong. Thx.
leoleo333 said:
But as I wrote if I go to fastboot/bootloader I cant type any command on every command it says "command not allowed" even the one for oem status and I cant turn on usb debbuging or oem unlock because I dont have os.
Click to expand...
Click to collapse
Is opend erecovery mode
I used Huawei multi tool,
For installing stock recovery,
If you success to flashing stock recovery
Then use dload method
shankarjdhv125 said:
Is opend erecovery mode
I used Huawei multi tool,
For installing stock recovery,
If you success to flashing stock recovery
Then use dload method
Click to expand...
Click to collapse
He has already explained that....!
It doesnt matter if you use multi tool or manual commands...You cant flash stock recovery because every fastboot command comes back 'remote command not allowed' and this is because the os will not boot so you cant enable oem unlock and usb debugging in order to unlock bootloader and have full use of adb/fastboot.
The dload method will install the update.app, it will even go to 100% and say success but it will NOT boot the OS. It will stay stuck on boot animation until the battery dies. Search my posts here on XDA (stuck on boot logo).
I think it has to do with the partitions or the filesystem...I'm afraid i cant help you with that @leoleo333
@leoleo333 , you mention that your bootloader is unlocked...I think you should double check that. if it was unlocked you would be able to use fastboot commands and flash whatever you want. I have read many posts on XDA where members report that their bootloader is unlocked and the device says as much but in fact that is not the case! Let me know how things go. Good Luck.
I managed to fix it couple of days ago with dload method, it actually worked for me i would try it before but i did not had micro sd card
Nice, Im really glad that the dload method was all it took to fix it. Take it easy now.
Bro try this ,added screenshots ,I fixed same issue
iantechie1979 said:
He has already explained that....!
It doesnt matter if you use multi tool or manual commands...You cant flash stock recovery because every fastboot command comes back 'remote command not allowed' and this is because the os will not boot so you cant enable oem unlock and usb debugging in order to unlock bootloader and have full use of adb/fastboot.
The dload method will install the update.app, it will even go to 100% and say success but it will NOT boot the OS. It will stay stuck on boot animation until the battery dies. Search my posts here on XDA (stuck on boot logo).
I think it has to do with the partitions or the filesystem...I'm afraid i cant help you with that @leoleo333
Click to expand...
Click to collapse
Same issue fixed by me
Software install failed but successfully booted
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?