Hi!
i tried to remove the software right menu but after i deleted every file form the software, i still have the text "Right Menu" on the right button. when i push the button the mobile says that the link to the software is missing.
the programm was installed on my storage card and i removed everything i could find.
how can i change the value from the right button? or do you know which file right menu creates, that i could remove it?
thanx a lot!
schneidl
In the registry HKCU\Software\Microsoft\Home\Keys\113 delete all values or customize it
thanks! solved my problem!
DEATH
Thank you so much! I was about to make a hard reset cause Right Menu had taken over my left soft key, + you thaught me how to change my soft keys. THANKS!
After having SD card issues with the 0.6.6 eMMC build I flashed over with the 0.6.7 CWR build. I had found the SD card fix, but it didn't really stick and reverted back a couple times...
The eMMC build had an easy to access interface for changing the number of desktops and row/columns for the desktop. I can't find any way of changing this on the 0.6.7 CWR build. Is their a utility for this? (would make it simpler), or if not, can someone point me to the proper config file that needs to be edited?
Thanks,
If you have your Nook hardware button set to Softkeys, you can hit that, then hit the menu button. A list of options will appear at the bottom of the screen. Hit the "More" button, and an ADW Launcher Settings button will appear. Hit that. You should be able to navigate to it from there.
This is all assuming you're on the main widget/launcher screen to start with.
Thanks,
Turns out there was no custom launcher installed in this build. But this was enough to lead me where I needed to go. Zeam was the custom launcher on the prior build and when I installed it and set the launcher actions I was able to access the configs I was looking for...
Hi everyone!
I've been trying to make some changes in the hidden menu - HEADSET(HPOUT1) in order to boost FM radio volume - but when I try to save the new values I get the Message: getMethod error.
Any ideas how to solve this?
Thanks!
I'm using classicnerd's ics rom and I just cant figure out how to cut, copy & paste like I can on my mobile with cyanogen. I do a long press and can get the two cursor ends to select what I want, but then I try a long press or a tap or a double tap and nothing.
Am I just missing something here? Where is the old menu selection?
Love xda, thanks everyone!
i found that problem too....sadly i haven't solved it but you're not the only one
Fixed!
Classicnerd's latest update fix it for me, version 4.04.4. Yay!
PREVENT - ALLOW GALAXY NOTE HOME KEY FROM ACCIDENTALLY WAKE UP DEVICE:
Some people complained about the Home keys of Galaxy Note sometime is touched and turned on accidentally when taking it in-out of the pocket.
After studying some articles on-line for Droid X phone (not same as the Galaxy Note), I digged around in the directory system/usr/ keylayout. Finally, I have found a way to do it. I can disable the HOME key from wake up the phone in off-screen state, but still let it to move from apps drawer to standby screen as usual. And I think it works!!
- Goal: Modify 2 file related to wake up function of the Home key (code 102).
- How to:
+ Using Root Explorer go to the folder: system/usr/keylayout, set permission to Mount R/W;
+ Click to select the 2 files: gpio-key.kl and sec_key.kl to modify them. When the menu appears, select: Text Editor to modify the files.
+ Move to the line: "key 102 HOME WAKE" in the 2 files above and put the cursor on the position of "WAKE" to erase the word "WAKE".
+ Press Menu hard button, select Save Changes, the phone will save the backup file and save the current files.
+ Set permission to Mount R/O for the folder: system/usr/ keylayout.
+ Shut down and then restart, Ahh, it worked!
Note: If you want to use Home key to wake up Galaxy Note again, go to delete two above modified files and rename the two backup files to gpio-key.kl and sec_key.
For people don't want to do it manually, I make the 2 flashable files for Allow and Disallow the Home key for Note and tested for working, at least on my Galaxy Note.
The 2 flashable files to do that is attached below. Copy to SDCard/ExternalCard and flash them in CWM Recovery, then reboot:
works for me. thx.
Sent from my GT-N7000 using XDA
kui425 said:
works for me. thx.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
OK. Hope that help.
Thanks for reply.
flashable zip
Could you make a flashable zip file for this?
Would be great!
Thanks in advance...
bunique said:
Could you make a flashable zip file for this?
Would be great!
Thanks in advance...
Click to expand...
Click to collapse
Yes..please.
+1
GT-N7000-LiquidSmooth-V [2.2] .
Wish I could give u more thanks for this. Works like a charm. Very very annoying that the home button would wake the phone up by default.
Flashable files to Allow or Disallow the wake-up function of Home key for Note
Flashable file for Allow and Disallow the Home key for Note
Phew! I tried my best to make the flashable file and tested for working, at least on my Galaxy Note.
Here is the link for Allow and Disallow the Home key for Note.
Copy to your SDCard and flash them with CWM Recovery.
Hope them could help.
bunique said:
Could you make a flashable zip file for this?
Would be great!
Thanks in advance...
Click to expand...
Click to collapse
firasusman said:
Yes..please.
+1
GT-N7000-LiquidSmooth-V [2.2] .
Click to expand...
Click to collapse
a big THANKS for the flashable files!
will give it a try....
Works perfectly, thanks
Cassie's xtra lite v2.9
Good Job
AWESOME. thanks!
Do not work on JB SLIM BEAN
Sent from my GT-N7000 using Xparent ICS Blue Tapatalk 2
I can not thank you enough for this as I have struggled with this issue for the past 12 months and as my job is a dirty one I can feel my phone getting hot in my pocket but cannot take it out as by hands are black. Thanks.
looks like this is not working in Jelly Bean / Cyanogen 10.1
vasiaeva said:
Do not work on JB SLIM BEAN
Sent from my GT-N7000 using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
does somebody know whitch file(s) to edit for this to work in Jelly Bean or Cyanogenmod 10.1.
I'm on asylum 4.2.2.this is a cyanogen 10.1 mod , like slim bean .
It looks like we need to change more/other files for this to work , wile when i canche the here adviced ones , nothing seems to change ,, the volume buttens still behave the same.
/system/usr/keylayout/sec_key.kl is changed to..
key 115 POWER WAKE
key 114 POWER WAKE
key 102 HOME WAKE
key 107 ENDCALL
key 105 DPAD_LEFT
key 106 DPAD_RIGHT
key 103 DPAD_UP
key 108 DPAD_DOWN
key 232 DPAD_CENTER
key 116 POWER WAKE
key 212 CAMERA WAKE
look at line 115 and 114 this would change te volume button function in the power funtion , i suspect , AM I RIGHT ????
in fact this does not change the behavior of the volume buttons at all it still changes te volume , btw i did restart after changing te sec_key.kl file
please advice manny thanks in advance
Is it possible to add long press action to Home key or other capacitive keys like in CM roms ? How to make it turn on flash light ?
Any idea if this works on the s4 too?
StuartTheFish said:
Any idea if this works on the s4 too?
Click to expand...
Click to collapse
Just tried, and yes it does work on the s4. We only have the one file though, gpio-key.kl. Same location though. Find the line that says home, and delete the word wake. Save changes and reboot, job done!