Best CM version for the pad? - TouchPad Q&A, Help & Troubleshooting

Got a quick question, I want to start over with he pad since my last install.
Which version however is the most stable, quickest with least battery drain?
At the moment I am running jscullins cm preview version, everything working as t should Ubuntu touch, will get rid of that, its fun but not stable, thanks for bringing ubunt touch to hp
Thanks for you input
Sent from my cm_tenderloin using Tapatalk HD

Brave question to ask here. I wish you luck with the oncoming responses
I am personally enjoying cm10.1 ATM i recently upgraded from cm9 and although the differences are not huge, i do find cm10.1 to have much better battery life and is also running vey stable. Both have been JCs builds.

Personally, I had been running the jcsullins cm10 build for a long time (which was very stable and snappy) and just recently switched to the cm10.2 build. Results so far have been a-ok. The only "problem" I've had is bluetooth not working, but I guess that is a known issue we just have to wait for. At this point, I don't see myself going back unless something major pops up.

That is really subjective and changes from user to user.
You should try for yourself and find the one that suit you better.
Thank you and thread closed.

Related

Best\Most Stable Rom?

Hi i just bought a new Hp touchpad.
I want to know what is the best rom for it.
I know that there are cyanogen 7 and 9 ports.
There are things that are not working on some of them , so if cynogen 7 is working and stable i think i would install that and wait for cyanogen 9 to become stable.
Can you give some advice , what to do , which rom shoud i install.
Thank you , and sorry if this is a noob question
CM9 alpha 2, its stable and actually running better than cm7
There are also several "kang" builds in the Dev section. I've been running CherryKang lately, with good results.
Thans guys , so have you had any problems with these roms?
Except the camera are there some other quirks?
And do you know how long is the period between releases ?
Thanks again
boban984 said:
Thans guys , so have you had any problems with these roms?
Except the camera are there some other quirks?
And do you know how long is the period between releases ?
Thanks again
Click to expand...
Click to collapse
The cherryrom still doesn't have Netflix working but has HD YouTube working (it states that in his top post). The nightlies have everything working from alpha2 with only a couple changes that will be merged into the next official release anyways. The cornerstone ROM is really slow and bricked ROM hasn't seen public releases after alpha2. And there's protekk's AOKP and classnerd, neither have Netflix working either.
I say go for the nightly. And I guess development has slowed because everyone is waiting on dalingrin for new stuff. I'm guessing the kernel is going to be updated to 3.0 and or they're working on audio.
Samsung Captivate CM9 - Glitch Kernel | HP TouchPad CM9 - Bricked Kernel
I honestly haven't tried Netflix (I guess it's not working), and only a few games. There are a few notable ones that don't work, but for normal stuff it's all good. The main problem that I've had with CM (I've only used CM9 and skipped CM7), is that the TP will essentially lock up, often times when charging on the touchstone charger. That said, ever since upgrading to the latest CherryKang (0.9), I haven't had a single issue (knock on wood). I have tried Bricked and the official CM9 alpha and both did the same thing, so I think it's just a Cm issue (there are a few similar issues going around, it seems).
Go for AOKP.
M4 has working netflix and youtube.
I personally haven't found a rock solid rom , but there are a few that are really close to it. I'd say try the new cherry-kang v9.2 with o/c , HD youtube' + netkflix etc. Syn(3.10.2012). Its fast and reliable. I have to reset my Wi-Fi the least with this one.
I'm running aokp and nextflix and YouTube work no problem for me
Sent from my SGH-T989 using Tapatalk
"I personally haven't found a rock solid rom , but there are a few that are really close to it. I'd say try the new cherry-kang v9.2 with o/c , HD youtube' + netkflix etc. Syn(3.10.2012). Its fast and reliable. I have to reset my Wi-Fi the least with this one."
I'd have to agree with the above post, the latest CherryKang (standard cm9 version, not the bricked rom) has proven the most stable for me. Unless you expect to be using the camera/microphone a great deal on the TouchPad, I would definitely suggest taking the jump to CM9.
I did just flash the Cornerstone 1.1 rom w/ 120 DPI patch, and although there have been a couple of very minor glitches, it's performing fairly well so far. (I was forced to reboot my TP-audio distortion- and my wifi reconnected without me having to use the forget the network/reboot rescue method. I haven't personally tried the AOKP Milestone 4 rom, so you might want to check out that thread and decide for yourself.
As for your question on release dates, other than the nightlies, they come out whenever the developer has something new to put out. Since I've been following these forums, it's generally taboo to openly ask a developer for the next release date. Doing so may make you susceptible to verbal reprimand from other members. Personally I'm not blasting you, but I don't want to see someone else fire back at you in a more harsh manner in the future.
Good luck with whichever rom you decide to flash!
HTC Thunderbolt - Shifts3ns3 3.1; HP Touchpad CherryKang v9.2;
I've recently been running AOKP M4 with great results, I like it
CyanogenMod 9 Alpha 2 is also fantastic
I wouldn't really suggest any others though.
I have cm9 on mine and Wifi doesn't reconnect a lot after waking from sleep. Ill check out this cherry one I guess.
Sent from my Kindle Fire using Tapatalk
I'd vote for AOKP. Its running really well on my touchpad.

Which ICS rom will give the best experience?

I just got my broken charger replaced so I haven't really been following development. Which ICS rom is best developed and gives the best performance and experience?
As far as I understand it, there is just one at the moment. This one: http://forum.xda-developers.com/showthread.php?t=1370873
What can be confusing is that as it's still alpha, you don't see official Cyanogen nightlies for this development effort yet. However several wonderful individuals have stepped forward to fill this need for the interim.
The other choice is if you wish to have opengl rendering turned on or not.
Soon, I'm sure you'll have four choices as 3.x kernel development is going on as well, so you'll eventually need to choose between the 2.x kernel with or without opengl and 3.x kernel with or without opengl.
What fun! But all of them are excellent.
I've used the builds from here (both opengl and not) and have been quite happy.
gregc2009 said:
I've used the builds from here (both opengl and not) and have been quite happy.
Click to expand...
Click to collapse
Yeah by best rom I really meant opengl vs non opengl. Which one is better?
EverythingNook said:
Yeah by best rom I really meant opengl vs non opengl. Which one is better?
Click to expand...
Click to collapse
Non is more stable with snappier performance. But only plays flash with Opera Mobile.
Krylon360, with open communication from the Nook Devs, has released AOKP for the Nook Color.
It can be found here: http://goo.gl/9Z4BR
It's nice to have some more options, and that's what AOKP is all about.
12paq said:
Krylon360, with open communication from the Nook Devs, has released AOKP for the Nook Color.
It can be found here: http://goo.gl/9Z4BR
It's nice to have some more options, and that's what AOKP is all about.
Click to expand...
Click to collapse
Thanks! I'm gonna try this one.
thanks for posting that link 12paq, I have been waiting for AOKP for the nook. I've been running it for the last few hours and its running pretty nice. a few glitches here and there but nothing major, and I haven't noticed any major difference performance wise compared to cm9. big thanks to Krylon360.
Cap18k said:
thanks for posting that link 12paq, I have been waiting for AOKP for the nook. I've been running it for the last few hours and its running pretty nice. a few glitches here and there but nothing major, and I haven't noticed any major difference performance wise compared to cm9. big thanks to Krylon360.
Click to expand...
Click to collapse
It's a bit buggy, but so is CM9, but maybe just a bit less. I did get Hulu to play a "House" episode, Netflix is a no go. When and if the new kernel comes out then we will likely see some performance increases to CM9 based builds.
To be on topic, I'd reluctantly recommend CM7 for the best overall Nook build, even though CM9 is very functional and fun. The Nook is not my only tablet and I use it for light reading and hardcore experimenting (I am head test monkey for my dev friends of higher aptitude, lol) I always want to be on the cutting edge, however performance and options can suffer. This tablet has been a blast as well as a fantastic learning tool for me, but as a daily runner, not so much anymore.
12paq said:
To be on topic, I'd reluctantly recommend CM7 for the best overall Nook build, even though CM9 is very functional and fun.
Click to expand...
Click to collapse
I second that! Cm7 is by far the most stable ROM on the nook color. Also, I have gotten used to having my "back" button on the bottom right corner that I'm not running CM9 until they can change that.
Do you use the same cm9 rom for bootable sd card as you would to flash?
Sent from my NookColor using xda premium
As a general rule yes... the "recovery mode" script on Verygreen's sd install will modify the way the installer script works to install correctly...
there is an exception:
Racks' tripple boot sd has to have the files modified prior to placing on SD... so it knows which to install as primary and alternate.
RedheadTarn said:
I second that! Cm7 is by far the most stable ROM on the nook color. Also, I have gotten used to having my "back" button on the bottom right corner that I'm not running CM9 until they can change that.
Click to expand...
Click to collapse
For me, since I dont spend so much time on games anymore, I made CM9 as my daily system. For sure it lags a bit at speed, in comparison to CM7, but other than that is perfectly fine.
i tried the AOKP version listed earlier and i agree its nicer and smoother than the CM9 thats going right now but i have noticed with both its less responsive than my CM7..
anyone else having this issue or is it just because its a working progress?
bmar08 said:
i tried the AOKP version listed earlier and i agree its nicer and smoother than the CM9 thats going right now but i have noticed with both its less responsive than my CM7..
anyone else having this issue or is it just because its a working progress?
Click to expand...
Click to collapse
snag build 40 from goo app off the store flash that...
krylon360 did some amazing work on it its fast ...
I have tried all the CM7 from the SD Card and now from the eMMC and although I love how they run, I'm very please and happy how my Nook is running with Samiam CM9 build from eMMC. I have tried eyeballer and krylon360 builds yet for some reason they both make my Nook freeze at times while with the Samiam build I don't have that problem. I have change the launcher to ADW Ex since the Trebuchet launcher do uses more RAM than ADW. I play many games, browse the internet and just about everything. I know that there's some features that are still not working but they are not so essentials for me anyway. I don't use Netflix, the Youtube HD work sometimes and sometimes it doesn't (can't explain how or why since there are reports that HD doesn't work on CM9 yet) but I can deal with that. Again, overall I'm sticking with CM9, hoping that sooner or later the will come with an official build. Thanks for all the hard work that everyone here does.
I have found krylon360's AOKP port for the Nook Color to be more responsive and smoother than the CM9 nightly builds. Being used to using AOKP on the Galaxy Nexus, it's nice to see those power features available on the Nook as well.
Definitely looking forward to krylon360's next AOKP release! :good:
CKTurbo128 said:
I have found krylon360's AOKP port for the Nook Color to be more responsive and smoother than the CM9 nightly builds. Being used to using AOKP on the Galaxy Nexus, it's nice to see those power features available on the Nook as well.
Definitely looking forward to krylon360's next AOKP release! :good:
Click to expand...
Click to collapse
+1
I second/third Krylon's AOKP. I' ve neen tinkering with all the ROM's and this is the best I've experienced so far
Sent from my DROID BIONIC using xda app-developers app
LGartrell said:
I second/third Krylon's AOKP. I' ve neen tinkering with all the ROM's and this is the best I've experienced so far
Click to expand...
Click to collapse
I'll give this a try tonight.
I've been happily running CM 7.1 for a long time, waiting for the ICS release. Got tired of waiting and installed a CM9 nightly a couple days ago. It was sluggish and many freezes resulted; not ready for prime time yet.

fastest ROm for Nook Color

Hello,
I have installed CM10 some time ago and i've notice that the device gets really slow to the point that it takes a few seconds from any app to come up once "clicked"
Anyone can recommend a fast ROM for this device?
Thanks.
Any CM7 flavor will get you there. It is up for debate as to whether the MCROM, Mirage, or official CM7.2 is faster, but I think it's mostly splitting hairs.
I don't know if CM10, when finally finished cooking, will ever be able to match the speed of CM7, but I doubt it.
PToN22 said:
Hello,
I have installed CM10 some time ago and i've notice that the device gets really slow to the point that it takes a few seconds from any app to come up once "clicked"
Anyone can recommend a fast ROM for this device?
Thanks.
Click to expand...
Click to collapse
For me the CM10 seems faster than the CM7 - CM10 is stll being worked on, but for me it is stable and fast. Screen draws are quick.
PToN22 said:
Hello,
I have installed CM10 some time ago and i've notice that the device gets really slow to the point that it takes a few seconds from any app to come up once "clicked"
Anyone can recommend a fast ROM for this device?
Thanks.
Click to expand...
Click to collapse
I'm currently running CM9 with V6 supercharge scripts enabled and it cooks along at a good clip. No lag or any issues at all.
The current CM10 Alpha is pretty fast
PToN22 said:
Hello,
I have installed CM10 some time ago and i've notice that the device gets really slow to the point that it takes a few seconds from any app to come up once "clicked"
Anyone can recommend a fast ROM for this device?
Thanks.
Click to expand...
Click to collapse
I've been doing my own builds of CM10 for a while, and it's easily twice as fast as CM9 right now, even in alpha. Bit stuttery, though.
CM10 is a bit better than 9, but 7 is clearly the fastest. I think 512MB RAM is just not enough for Android 3/4, and these OSs are clearly also more demanding on the CPU and GPU.
I don't know which one is fastest and I recommend you try them all. We have many excellent developers working on ROMs for the Nook.
I seem to be having very good experiences with the latest MiRaGe build from here: http://forum.xda-developers.com/showthread.php?t=1344873 and the updated Kernel from here: http://forum.xda-developers.com/showthread.php?t=1649390.
M-Rom has some very nice eye-candy if that is what you prefer and of course CM9/CM10 add all kinds of nice features.
I hope this helps.
Personally, I'd actually recommend trying the newest CM10 Alpha that's been going around. It's quite stable, minus the lack of OpenGL (hardware acceleration), HD YouTube, and Netflix. Although, if you can, I'd build it from source. A lot of bugs have been fixed since they have gotten CM10 up and running, including the n button bug in the thread.
For me, it feels like every time I update my source code and build, it gets faster and faster each time.
First of all, great job to all the devs and all the people that are still working hard on the old but yet always renew Nook Color, I appreciate the non stop hard work.
I'm loving what this new baby CM10 alpha is doing with my Nook, it is faster, more responsive and so far more stable than the ICS builds that I have tried. Wonderful job guys. And I know it is just the beginning.
I'm running the eMMC dual boot by Taosaur. I'm running CM7 on the alternative partition and CM10 alpha on the primary partition and both are running great. It is the beat combo yet.
Sent from Nook Color CM10 using xda premium.

[Q] Nook HD+ best rom for me, help!

I'm new to this but I understand the root & flash process.
I just need some help selecting & locating a rom for my nook hd.
I don't like the Barnes & noble os as it seems a little laggy.
Therefore I'd like to replace if with a proper android rom but I get confused with what the difference between stock & cm10 is.
I just want a stable android rom that's fast for browsing & will play netflix well.
Any help is appreciated.
Thanks
Stock ROM is the default Barnes & Noble operating system, the one you're using now. The term "stock" is used to describe this ROM, as it's the default ROM that comes installed with the Nook.
There are other ROMs available, so that you can customise your Nook. The one I would recommend, so that you can comfortably just use Android on a daily basis without worrying about anything else is CyanogenMod 10.1.3 (stable). This is a stable ROM, and ready for daily use without worrying about anything else. That's CyanogenMod (CM) 10.1.3. Do NOT install CyanogenMod 10.2, as this is a nightly version and not ready for daily use. You can install CM10.2 if you desire, but don't expect it to be perfect; there may be few issues and problems here and there.
Installing CyanogenMod 10.1.3 runs Android version 4.2.2, so that's Jelly Bean. CM10.2 runs Android 4.3 (however, this isn't stable yet). Here's a beginners guide to installing CyanogenMod for your Nook: http://forum.xda-developers.com/showthread.php?t=2317500
All the best, if you require any assistance, feel free to reply back.
For what it's worth, performance on my Nook HD+ with CyanogenMod 10.1.3 is absolute garbage. 10x worse than stock B&N ROM, everything lags to hell and back. Even scrolling the damn app menu lags, and I'm constantly seeing "<Insert App Name Here> isn't responding. Do you want to close it?" Everything, even the system idle process. I don't know what to advise as there seems to be no general consensus as to what's the best ROM, everything's under development, the only ROM listed under Original Android Development (which I'm hoping is as close as possible to stock) doesn't work.
rpop said:
For what it's worth, performance on my Nook HD+ with CyanogenMod 10.1.3 is absolute garbage. 10x worse than stock B&N ROM, everything lags to hell and back. Even scrolling the damn app menu lags, and I'm constantly seeing "<Insert App Name Here> isn't responding. Do you want to close it?" Everything, even the system idle process. I don't know what to advise as there seems to be no general consensus as to what's the best ROM, everything's under development, the only ROM listed under Original Android Development (which I'm hoping is as close as possible to stock) doesn't work.
Click to expand...
Click to collapse
My experience wasn't like that at all. While I wouldn't say it was blistering, it did seem on par or better than the Stock ROM. swiping was just a smidge laggy using Nova Prime.
I went on to Carbon and while it has a very nice feature set, it seems a good bit LAGGIER than the previous ROMs. I've been told that SlimBean runs nicely though, so I'm going to play with Carbon a little more but likely go on to that one when I decide to flash again.
I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.
rpop said:
I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.
Click to expand...
Click to collapse
Hi, I have been running 10.2 nightly for awhile now and have my tablet running several hours a day surfing Web, watching movies, reading, etc. and I have not had any of the lag or slowdown that you mention. I have had no random reboots or any trouble, I think it performs better than stock rom.
I am very happy with this setup.
So I hope this helps you some.
Sent from my BN Nook HD using Tapatalk 4
rpop said:
I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.
Click to expand...
Click to collapse
It is not CM10.1.3, it is your device being hit with the need for trim. Your stock would act the same way. Read in the CM10.2 thread.
Sent from my BN NookHD+ using xda premium
Oh my god, you're right! I have to admit I noticed the TRIM issue when I first installed CyanogenMod (hard to miss, it's at the top in big red letters ). I realized it's a perfect match for the performance degradation I'd been seeing, but I dismissed it as a possible cause out of a naive belief that there's no way a manufacturer could ship something that crippled. I thought surely it would have been caught during testing. I also didn't want to read a 100+ page thread to figure out exactly what the issue is when the search was broken. I've taken a few hours and caught up on the thread now... I guess if it looks like cheese, and smells like cheese... it's gotta be cheese.
I've got MAG2GA & 0x000015 memory chips, looks like my only option is to brick it and do a warranty swap I'm curious as to how the other people above reported good experiences; are you guys purposely installing builds with TRIM enabled because you know have good memory chips? Seems to me almost every ROM around here has it purposely disabled. Either that or you've barely used the internal flash memory.
I guess the first recommendation for Kido44 would be to figure out what kind of memory you have, so you know if you can install a kernel with TRIM enabled. The degradation in performance without it is so bad, I want to fling it at the wall. I guess it might not be noticeable right away for you if all you're planning on doing is some light web browsing and Netflix viewing, but you'll run into it at some point and weep. I suspect you're already getting there if the stock ROM is starting to lag a little bit.
As always, thanks to leapinlar for pointing me in the right direction
I've been happy with CM 10.1 for a while, ran really stable without any major hiccups, but the lag got so bad due to the lack of trim that I decided to take the plunge and risk installing 10.2 Milestone 1 with a trim-enabled kernel. I also have a bad emmc chip but I'm willing to risk it.
It's not what I'd recommend for everyone, but that's my experience.
episode96 said:
I've been happy with CM 10.1 for a while, ran really stable without any major hiccups, but the lag got so bad due to the lack of trim that I decided to take the plunge and risk installing 10.2 Milestone 1 with a trim-enabled kernel. I also have a bad emmc chip but I'm willing to risk it.
It's not what I'd recommend for everyone, but that's my experience.
Click to expand...
Click to collapse
Carbon B11 + cm10.1.3 kernel has been working well on my HD+ for a while. It's almost as fast as the trimmed cm10.2 but without the fault risk.
jamus28 said:
Carbon B11 + cm10.1.3 kernel has been working well on my HD+ for a while. It's almost as fast as the trimmed cm10.2 but without the fault risk.
Click to expand...
Click to collapse
Not sure I understand. Won't it get slow eventually because of the lack of trim?
Sure, but it was still usable after several weeks.
I like Slimrom for the most part and observedly better than CM 10.1.3 on my nook hd+. Seems faster and more responsive, and if you use Puffin browser, it seems like it's 2x faster compared to stock browser (that's just my imo, ymmv). Anyway, I've tested only 3 roms so far, slim, cm, and carbon, so my question is, are there any roms that you guys recommended on the hd+ that can maybe compare with slim? Slim doesn't seem to be officially supported.

[Q] Nub seeking advise (cm10 or cm11)

Hey everyone, awesome site! Yep, first post. :cyclops:
I'm completely new to Android though I have hacked a few things and understand the importance of making absolutely sure you know the procedures and make backups in case things get fubar. I've been digging through the posts quite a bit and of course see that opinions on use, stability, etc seem to vary a bit. What I'd like some kind feedback on is (as a nub) am I better off starting out using CM10 and then when I'm ready I can move on to CM11 or has CM11 been developed well enough to just start there. Also wondering how stable is "stable" on both. I'm much more interested in having a good and stable experience than a few extra bells and whistles until the kinks are worked out. I'm running a stock Nook HD+ now so it's all an upgrade in any case. Thanks in advance for all constructive feedback.
I went straight from rooted stock on my HD to CM 11 so I don't know how CM 10 ROMs are. But the CM 11 builds I've used from verygreen's thread since early January have been rock solid on my HD. Just 1 spontaneous reboot in the entire 2 months -- when granting superuser access to an app. That's it. Wi-fi, bluetooth, web browsing, music and video playback are all working fine. Swiping between screens is smooth. I did a clean install before I put CM 11 on, and I think that makes a difference vs. those who did dirty installs.
If you have an HD, CM 11 will let you use full screen mode which is very valuable for a 7" screen. I don't think you will get that with a CM 10 build which is based on JB. If you have an HD+, the gain in screen space that Kit Kat gives you is not as critical.
If you go to CM 10 first, you might have to reinstall everything for a clean install before jumping to CM 11. So you would ultimately save a lot of time by going straight to CM 11.
roms
hey Jodo901 :good:
my experience was that i purchased a HD+ and did loads of reading both prior to and after purchase. I chose the nook for a number of reasons (price vs performance) but also the awesome input from the guys here on XDA around custom roms.
For years I've always looked to get my devices updated with custom roms but always like to have a proper noob guide lol. The best place to start for me on the HD+ is this thread - http://forum.xda-developers.com/showthread.php?t=2317500
It explains the process step by step and is idiot proof (i did it!!) I have read numerous threads about which rom to put on the HD+ but settled on the stable 10.1.3 rom. i considered the 10.2 rom but the 10.2 had mixed reviews on the HD+ and the consensus was that 10.1.3 was a stable, mature and smooth rom. I am watching the CM 11 releases closely but it remains a work in progress, although from posters on the thread it seems that it is running almost perfectly. I will switch to CM 11 once verygreen posts a "stable" release - plus you can flash the roms as you wish, so can start with the stable 10.1.3 and then reflash when you're more confident or feel that the CM11 rom is more mature.
My advice would be go for 10.1.3 and follow the guide above. I didn't think the stock rom was that bad, but the 10.1.3 is night and day imho, its smooth, repsonsive and allows lots of funky tweaks. I've had this rom on my HD+ for a few days and am very pleased :fingers-crossed:
all the best with your choice fella
fish
Thanks for the quick responses guys! You've given me a bit more to consider and look into. That was one of the threads I bookmarked yesterday so thanks for pointing out it's validity. A further question that now comes to mind from what you both have said is how much of a hardware difference is there and is that something that can make a performance difference? Guess I'm still gonna be info diving for a bit tonight after work.
KitKat does improve on performance over Jelly Bean, but it's not something that will affect your daily use. I'm currently using CM 10.1.3 (stable) on a Nook HD+ and HD. I'm considering upgrading the HD to CM 10.2.1, as there is a stable build out. I will definitely upgrade to KitKat/CM11 when a stable build is released.
Personally, I only install stable builds. I don't want the hassle of encountering issues with nightlies. I find that CM10.1.3 is extremely stable, and I have not had any problems with it; although battery life is reduced from the original stock ROM, but that's nothing to be worried about. In conclusion, no issues with the CM10.1.3 stable build.
As a note, I also believe the TRIM issue has been fixed with the CM10.2.1 stable too on the Nook HD+; so CM10.2.1 should be fine too, but I haven't tried it yet.
All the best.
roms
Jodo901 said:
Thanks for the quick responses guys! You've given me a bit more to consider and look into. That was one of the threads I bookmarked yesterday so thanks for pointing out it's validity. A further question that now comes to mind from what you both have said is how much of a hardware difference is there and is that something that can make a performance difference? Guess I'm still gonna be info diving for a bit tonight after work.
Click to expand...
Click to collapse
hey jodo
i'm not sure what you mean by hardware difference? if you mean the effectiveness of each rom on the HD+ i suppose its a matter of preference and through trial and error in trying the roms available. It seems that CM11 is considered the faster of the roms available but as said previously this is an on-going rom development and not considered stable.
I considered what i was going to use my HD+ for, which in my case was surfing and reading books/comics and getting the best return on the stupidly low price vs decent spec and awesome screen. I didn't buy it to game as 1. its hardly a powerhouse for gaming and 2. i dislike mobile gaming and prefer PS and XBOX for that sorta thing. My priorities were smoothness, stability, customisation and battery life which i feel 10.1.3 provides, but others may disagree lol.
Fish
Thanks again for the input guys. :good:
I finally have a some time to dig in on the forums a little and maybe get to the rooting later. I'm running very light on the apps at this point. Just some online stuff, ebooks, comics, etc. Mostly looking for more control and customization.
@fishman09 - I thought perhaps there were hardware differences depending on the manufacture date of the Nook HD+ unit but I haven't seen anything like that so I assume it's a non issue. I know this can be something that makes a difference when hacking older game systems (Xbox, PSP, etc)
**********EDIT**********
Thanks again to everyone who gave me their 2 cents on my way into all this fun custom Android stuff on my Nook HD+!!
I have now successfully installed 10.2.1 and so far its working well and looks great.
Another data point: I was in same position as you. Decided to go for a cm11 nightly build (this was back in _Jan). It ran reasonably well, but I wondered if 10.2 would be more stable or better with battery life. It felt about the same, with couple missing things, notably no hiding of soft buttons. So I've now gone back to cm11, a march nightly build. I think it is as good as a $120 tablet is going to get . So I'm pretty happy and staying. I even enabled ART runtime and so far everything has run except asphalt 8.
Just make sure you format and wipe everything after doing a backup during your install process.
My Conclusion...or the time being.
Well after about 3 or 4 days of normal usage with CM 10.2.1 I have decided to go back to the stock version of the Nook.The difference in battery drain did not outweigh the bonuses of the upgraded OS for me at all. I would say the battery life was only about 2/3 as long. This is a big drawback in my opinion considering I really wasn't running anything differently. Yeah, it was a bit prettier and more customizable and I was very impressed with the stability, but it's kind of pointless to have a wireless device that you have to keep plugging in all the time.
Jodo901 said:
Well after about 3 or 4 days of normal usage with CM 10.2.1 I have decided to go back to the stock version of the Nook.The difference in battery drain did not outweigh the bonuses of the upgraded OS for me at all. I would say the battery life was only about 2/3 as long. This is a big drawback in my opinion considering I really wasn't running anything differently. Yeah, it was a bit prettier and more customizable and I was very impressed with the stability, but it's kind of pointless to have a wireless device that you have to keep plugging in all the time.
Click to expand...
Click to collapse
I got my new Nook+ last week and pondered whether to root and which ROM to use. After one week of use, I have no real issues keeping it stock for now but will follow the kitkat development for possible future rooting.

Categories

Resources