[Q] Nook HD+ best rom for me, help! - Nook HD, HD+ Q&A, Help & Troubleshooting

I'm new to this but I understand the root & flash process.
I just need some help selecting & locating a rom for my nook hd.
I don't like the Barnes & noble os as it seems a little laggy.
Therefore I'd like to replace if with a proper android rom but I get confused with what the difference between stock & cm10 is.
I just want a stable android rom that's fast for browsing & will play netflix well.
Any help is appreciated.
Thanks

Stock ROM is the default Barnes & Noble operating system, the one you're using now. The term "stock" is used to describe this ROM, as it's the default ROM that comes installed with the Nook.
There are other ROMs available, so that you can customise your Nook. The one I would recommend, so that you can comfortably just use Android on a daily basis without worrying about anything else is CyanogenMod 10.1.3 (stable). This is a stable ROM, and ready for daily use without worrying about anything else. That's CyanogenMod (CM) 10.1.3. Do NOT install CyanogenMod 10.2, as this is a nightly version and not ready for daily use. You can install CM10.2 if you desire, but don't expect it to be perfect; there may be few issues and problems here and there.
Installing CyanogenMod 10.1.3 runs Android version 4.2.2, so that's Jelly Bean. CM10.2 runs Android 4.3 (however, this isn't stable yet). Here's a beginners guide to installing CyanogenMod for your Nook: http://forum.xda-developers.com/showthread.php?t=2317500
All the best, if you require any assistance, feel free to reply back.

For what it's worth, performance on my Nook HD+ with CyanogenMod 10.1.3 is absolute garbage. 10x worse than stock B&N ROM, everything lags to hell and back. Even scrolling the damn app menu lags, and I'm constantly seeing "<Insert App Name Here> isn't responding. Do you want to close it?" Everything, even the system idle process. I don't know what to advise as there seems to be no general consensus as to what's the best ROM, everything's under development, the only ROM listed under Original Android Development (which I'm hoping is as close as possible to stock) doesn't work.

rpop said:
For what it's worth, performance on my Nook HD+ with CyanogenMod 10.1.3 is absolute garbage. 10x worse than stock B&N ROM, everything lags to hell and back. Even scrolling the damn app menu lags, and I'm constantly seeing "<Insert App Name Here> isn't responding. Do you want to close it?" Everything, even the system idle process. I don't know what to advise as there seems to be no general consensus as to what's the best ROM, everything's under development, the only ROM listed under Original Android Development (which I'm hoping is as close as possible to stock) doesn't work.
Click to expand...
Click to collapse
My experience wasn't like that at all. While I wouldn't say it was blistering, it did seem on par or better than the Stock ROM. swiping was just a smidge laggy using Nova Prime.
I went on to Carbon and while it has a very nice feature set, it seems a good bit LAGGIER than the previous ROMs. I've been told that SlimBean runs nicely though, so I'm going to play with Carbon a little more but likely go on to that one when I decide to flash again.

I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.

rpop said:
I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.
Click to expand...
Click to collapse
Hi, I have been running 10.2 nightly for awhile now and have my tablet running several hours a day surfing Web, watching movies, reading, etc. and I have not had any of the lag or slowdown that you mention. I have had no random reboots or any trouble, I think it performs better than stock rom.
I am very happy with this setup.
So I hope this helps you some.
Sent from my BN Nook HD using Tapatalk 4

rpop said:
I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.
Click to expand...
Click to collapse
It is not CM10.1.3, it is your device being hit with the need for trim. Your stock would act the same way. Read in the CM10.2 thread.
Sent from my BN NookHD+ using xda premium

Oh my god, you're right! I have to admit I noticed the TRIM issue when I first installed CyanogenMod (hard to miss, it's at the top in big red letters ). I realized it's a perfect match for the performance degradation I'd been seeing, but I dismissed it as a possible cause out of a naive belief that there's no way a manufacturer could ship something that crippled. I thought surely it would have been caught during testing. I also didn't want to read a 100+ page thread to figure out exactly what the issue is when the search was broken. I've taken a few hours and caught up on the thread now... I guess if it looks like cheese, and smells like cheese... it's gotta be cheese.
I've got MAG2GA & 0x000015 memory chips, looks like my only option is to brick it and do a warranty swap I'm curious as to how the other people above reported good experiences; are you guys purposely installing builds with TRIM enabled because you know have good memory chips? Seems to me almost every ROM around here has it purposely disabled. Either that or you've barely used the internal flash memory.
I guess the first recommendation for Kido44 would be to figure out what kind of memory you have, so you know if you can install a kernel with TRIM enabled. The degradation in performance without it is so bad, I want to fling it at the wall. I guess it might not be noticeable right away for you if all you're planning on doing is some light web browsing and Netflix viewing, but you'll run into it at some point and weep. I suspect you're already getting there if the stock ROM is starting to lag a little bit.
As always, thanks to leapinlar for pointing me in the right direction

I've been happy with CM 10.1 for a while, ran really stable without any major hiccups, but the lag got so bad due to the lack of trim that I decided to take the plunge and risk installing 10.2 Milestone 1 with a trim-enabled kernel. I also have a bad emmc chip but I'm willing to risk it.
It's not what I'd recommend for everyone, but that's my experience.

episode96 said:
I've been happy with CM 10.1 for a while, ran really stable without any major hiccups, but the lag got so bad due to the lack of trim that I decided to take the plunge and risk installing 10.2 Milestone 1 with a trim-enabled kernel. I also have a bad emmc chip but I'm willing to risk it.
It's not what I'd recommend for everyone, but that's my experience.
Click to expand...
Click to collapse
Carbon B11 + cm10.1.3 kernel has been working well on my HD+ for a while. It's almost as fast as the trimmed cm10.2 but without the fault risk.

jamus28 said:
Carbon B11 + cm10.1.3 kernel has been working well on my HD+ for a while. It's almost as fast as the trimmed cm10.2 but without the fault risk.
Click to expand...
Click to collapse
Not sure I understand. Won't it get slow eventually because of the lack of trim?

Sure, but it was still usable after several weeks.

I like Slimrom for the most part and observedly better than CM 10.1.3 on my nook hd+. Seems faster and more responsive, and if you use Puffin browser, it seems like it's 2x faster compared to stock browser (that's just my imo, ymmv). Anyway, I've tested only 3 roms so far, slim, cm, and carbon, so my question is, are there any roms that you guys recommended on the hd+ that can maybe compare with slim? Slim doesn't seem to be officially supported.

Related

CM9, CM10, CM11... which one to choose?

Currently running CM9 on my Touchpad. Use it for web browsing, few games, mostly apps, and occasionally BT w/ my HP keyboard. Not sure if I should upgrade to KitKat (CM11) or go with CM10.1/2, or just stick with what I have. Any suggestions and breakdowns of what each version is best for, in regards to what I use mine for and stability/performance are welcome.
Also, if anyone has any battery information, that would be great. I know CM9 is alright, but it still drains fairly quickly. Thanks guys.
shadowscott said:
Currently running CM9 on my Touchpad. Use it for web browsing, few games, mostly apps, and occasionally BT w/ my HP keyboard. Not sure if I should upgrade to KitKat (CM11) or go with CM10.1/2, or just stick with what I have. Any suggestions and breakdowns of what each version is best for, in regards to what I use mine for and stability/performance are welcome.
Also, if anyone has any battery information, that would be great. I know CM9 is alright, but it still drains fairly quickly. Thanks guys.
Click to expand...
Click to collapse
Use to CM10 for now. I've been using CM11 for a while now and it is really hitting a rough patch to the point it is nearly unusable. CM10 is pretty mature and you will like it much more that CP9.
Good luck!
C
shadowscott said:
Currently running CM9 on my Touchpad. Use it for web browsing, few games, mostly apps, and occasionally BT w/ my HP keyboard. Not sure if I should upgrade to KitKat (CM11) or go with CM10.1/2, or just stick with what I have. Any suggestions and breakdowns of what each version is best for, in regards to what I use mine for and stability/performance are welcome.
Also, if anyone has any battery information, that would be great. I know CM9 is alright, but it still drains fairly quickly. Thanks guys.
Click to expand...
Click to collapse
I chose May release of CM9 for better battery life
charleypick said:
Use to CM10 for now. I've been using CM11 for a while now and it is really hitting a rough patch to the point it is nearly unusable. CM10 is pretty mature and you will like it much more that CP9.
Good luck!
C
Click to expand...
Click to collapse
Don't agree with that. Using Flintmans nondata cm11 and its fully usable IMO. No freezes, keboard bt works. I liked the straight update with this nondata rom, nothing to change except system partition size from 300 to 600MB.
If you want cam to work, go for 10.2 though, Milaqs rom seems nice.
i like the non-data media roms since I want to maximize the space I can access on both webos and android easily.
I use JCSullins 4.2.2. Battery drain is great, doesn't even lose 1% in like 5 hours sleeping. Not a data media build which is good as I think they're pointless.
I am using CM10. I used CM11 for a few day and went back. My kiddo uses it for netflix and dish anywhere, so it needed to be a little more stable.
milaq
jakkzen said:
I am using CM10. I used CM11 for a few day and went back. My kiddo uses it for netflix and dish anywhere, so it needed to be a little more stable.
Click to expand...
Click to collapse
milaqs 3.0 version seems to work well
theronkinator said:
I use JCSullins 4.2.2. Battery drain is great, doesn't even lose 1% in like 5 hours sleeping. Not a data media build which is good as I think they're pointless.
Click to expand...
Click to collapse
Which date is that build from, it you don't mind?
Also, in general, which builds tend to be fastest? CM10 or CM11? Or does it matters more about the kernal?
Thanks,
Dylan
dwalk51 said:
Which date is that build from, it you don't mind?
Also, in general, which builds tend to be fastest? CM10 or CM11? Or does it matters more about the kernal?
Thanks,
Dylan
Click to expand...
Click to collapse
Everything is subjective, you really have to try them yourself to see what works for you and read the comments in the individual thread's to help you make a decision.
But you should have loads of fun trying them.
All the best.
I also use JCSullines 4.2.2.
It is CM10.1 on Kernel 2.6. I believe it is an early January 2014 build ( you can find it by searching for Tenderloin Jellybean with Bluetooth support)
To answer the OP question, each build has advantages.
CM7 was bay FAR the most responsive, and was always able to play local amd streaming content flawlessly.
CM9 provided android 4.0 and the UI enhancements. However it had lip sync issues on local video content. It did however allow very easy updates through "OTA like updates" in the system settimgs options
CM10 -- unknown, didnt try it.
CM10.1 (k2.6)-- basically is CM9 fixed... Mostly. It plays videos well and less battery draim (gone are the days of zero batter without waening and the fear it may be bricked). The issue is that it gets slow with time, perhaps hours or a day.. But youll need to reboot before to long. Videos can lag pretty bad, particularly streaming HD content.
CM10.1 (k3.4) -- unkown, but hopeful. Faster responce, low battery drain, yet possible issues with BT amd or audio/HD videos
Sent from my SCH-I545 using xda app-developers app
Cm11 3.0 from jcsullins 5/4 - most stable Skype and Bluetooth I've tried!
Sent from my TouchPad using Tapatalk
Will be moving to CM11 for 4.4.2 support. Had CM10 for a while and loved it, but need 4.4.2 for Xfinity TV support. Can't wait...
Echoing what others have said, I use Milaq's 4.3 rom (cm10.2), which works well for me: stable, relatively low battery drain, BT, camera. It even supports OTG which I use with my DSLR. Great rom. I am planning on experimenting with jc's 4.4.2 on another TP.
Sent from my TouchPad using xda app-developers app
I've been using JCSullins 10.1 for a while and just went to his 11. So far the only downside is the current version of Netflix doesn't work correctly. Both bluetooth and camera seem to work correctly though which, if I recall, is a plus over CM9.
I've been using CM9 since i bought this tablet. But its starting to become very unresponsive, there is noticeable lag, it often freezes, so i have to reboot or wait for a really long time and it's very slow for everyday use like browsing etc..
I just updated to latest version of CM9 (only wipe cache and dalvik). What may be the cause of this, since I know that CM9 was much faster when i first installed it and how can i make it responsive again?
might be just the case that you've been installing too many apps
i'm on the last cm9 nightly, and everything works (audio, video/decoding, bluetooth, camera, wifi etc), and everything is as fast as I remember it
additionally, i've flashed the modified kernel that you can overclock the cpu/gpu, so games and whatnot are faster
i've only installed things i actually use, have greenified to hibernate everything when not in use, and go to deep sleep mode after 1 min of screen off
anyways, i sorta want to upgrade to cm11, just because it's newer, is there a version that has everything working and stable except the camera, that's the one thing i never use (i also very rarely use the bluetooth, but i like syncing the ps3 controller to play games)
I'm gong with cm11
Sent from my HTC One_M8 using Tapatalk
I was on CM9 for a long time and quite happy but decided to make the jump to CM11/4.4.2 and have zero regrets.
The updated look and feel is well worth it, the interface and UI is super responsive and much quicker than CM9. This may be due in part to having to do a full uninstall of CM. Battery life is great.
I am on 20140409-SNAPSHOT-jcsullins which is a data media build and frankly was not hard to setup. AcmeInstaller takes care of everything and the only real additional step was resizing the partitions which was super easy with the .zips, I highly recommend mpgrimm2's guide and if you can find it Roland Deschain's guide. Give it a couple of reads and it's really not hard.
Netflix won't work out of the box but again, the fix is super easy, use method #2 from this thread and enjoy, just one .zip to flash and just make sure you are on Netflix 3.2.1 and do not have autoupdate on.
http://forum.xda-developers.com/showthread.php?t=2405995
I highly recommend spending about 15 minutes to read through the setup guides, then another 20-30 minutes to go through the uninstall and fresh install of CM11. You will not regret it.
I was using CM9 for a while and recently went to CM11. While others are sharing great success and how great things are running, I haven't been too happy with it. Apps that would normally run are now lagging like no other. Waking up from sleep seems to be an issue. Random reboots. I also still can't access the sounds setting without settings FCing on me. Eh, best of luck to whatever you choose! :good:

[Q] Leave Well Enough Alone (Finally)???

At the risk of sounding a touch naive, I feel compelled to ask the following.
Having owned an original 7 inch Nook that I fully converted to 4.1 and now the very satisfied owner of an HD+ that I fully converted to 4.2.2 some time ago, is there any "real world" advantage to moving up to 4.4 with the following considerations:
1. Under a fully transformed eMMc 4.2.2, I am experiencing no operational problems or issues.
2. My primary use for the HD+ is reading using both the Nook and Kindle apps, occasionally watching movies using the MX Player app, using a small handful of other apps primarily for current events and weather, email, and using the larger screen to view digital photos taken on my trips.
Under 4.2.2, it handles all of the above with few, if any, real hiccups.
If my actual day-to-day usage remains as above, will 4.4 really offer any substantive changes?
With that said, have I finally arrived at the "leave well enough alone" time in my ongoing transformations and updates?
Thanks in advance for any relevant comments and/or advice.
I'm just going to assume you are talking about CM10.1 (4.2) and CM11 (4.4).
CM11 is still a Nightly, so i would not recommend it as you want to use your HD+ for normal activities and not to experiment with.
To me, CM10.2 (4.3) ist the most stable version, but if you don't encounter any problem with 10.1, then there is no real need to upgrade IMO.
If everything is working I would let it ride. If you do decide to move forward make a backup so you can go back.
I'm in kind of the same boat. I've been using the Xperia tweaked Carbon ROM which is 4.2.2 and have yet to see a real compelling reason to move from it. My desire to constantly flash something and try new roms is outweighed by my desire to have a stable, useful device.
Sent from my LG-LS970 using xda app-developers app
Thanks.
"My desire to constantly flash something and try new roms is outweighed by my desire to have a stable, useful device." Could not have phrased it better myself. Have definitely reached the point where experimenting, rooting, fully transforming, etc. no longer works as its own stimulant in the face of a very stable, reliable, eMMc conversion that works the way I (currently) need it to. Now if Amazon would bring out an 8.9 inch version of the DX that I have with a touchscreen and back light...hmm!
I started with various CM11 nightly builds, then "downgraded" to CM10.2 and now am happier. Various apps I had problems with are now working. I miss a few minor things like no transparent status bar and soft buttons not hiding in some apps, but I prefer the stability. I may try CM11 later at some point.
Hmm... Your mileage may vary...
I have been upgrading my Nook HD+ steadily until verygreen's 1/18 build of CM11. I have installed the pa_gapps-modular-full-4.4.2-20140111-signed gapps package. I have access to just about everything I need on the Google Play store, Amazon Store, 1mobile store. It is solid. Doesn't reboot without reason. And except for a couple of non-standard apps, everything runs smooth and good. I couldn't be happier with this version of KitKat and I like it a lot better than JellyBean, and my battery life is very good, even when running intensive games or using WiFi heavily.
Is there a real reason to upgrade? That is a personal preference. I would say yes, as my experience has been so good. Even the upgrade process was fairly painless using verygreen's instructions. Just had to load a new CWM, reboot into it and flash the new rom and gapps and I was on my way. Fair to say, I haven't been upgrading to every new nightly that comes out. Viewing the changelogs, I don't see any obvious reason to do so, and so I am waiting for any changes that verygreen deems necessary to flash.
That's my two-pence worth of opinion. I hope that helps alleviate any fears you might have for upgrading.
Thanks to all for your replies and comments. Looks like I will stay put with 10.1/4.2.2 for the time being as all is "really" well!

[Q] Nub seeking advise (cm10 or cm11)

Hey everyone, awesome site! Yep, first post. :cyclops:
I'm completely new to Android though I have hacked a few things and understand the importance of making absolutely sure you know the procedures and make backups in case things get fubar. I've been digging through the posts quite a bit and of course see that opinions on use, stability, etc seem to vary a bit. What I'd like some kind feedback on is (as a nub) am I better off starting out using CM10 and then when I'm ready I can move on to CM11 or has CM11 been developed well enough to just start there. Also wondering how stable is "stable" on both. I'm much more interested in having a good and stable experience than a few extra bells and whistles until the kinks are worked out. I'm running a stock Nook HD+ now so it's all an upgrade in any case. Thanks in advance for all constructive feedback.
I went straight from rooted stock on my HD to CM 11 so I don't know how CM 10 ROMs are. But the CM 11 builds I've used from verygreen's thread since early January have been rock solid on my HD. Just 1 spontaneous reboot in the entire 2 months -- when granting superuser access to an app. That's it. Wi-fi, bluetooth, web browsing, music and video playback are all working fine. Swiping between screens is smooth. I did a clean install before I put CM 11 on, and I think that makes a difference vs. those who did dirty installs.
If you have an HD, CM 11 will let you use full screen mode which is very valuable for a 7" screen. I don't think you will get that with a CM 10 build which is based on JB. If you have an HD+, the gain in screen space that Kit Kat gives you is not as critical.
If you go to CM 10 first, you might have to reinstall everything for a clean install before jumping to CM 11. So you would ultimately save a lot of time by going straight to CM 11.
roms
hey Jodo901 :good:
my experience was that i purchased a HD+ and did loads of reading both prior to and after purchase. I chose the nook for a number of reasons (price vs performance) but also the awesome input from the guys here on XDA around custom roms.
For years I've always looked to get my devices updated with custom roms but always like to have a proper noob guide lol. The best place to start for me on the HD+ is this thread - http://forum.xda-developers.com/showthread.php?t=2317500
It explains the process step by step and is idiot proof (i did it!!) I have read numerous threads about which rom to put on the HD+ but settled on the stable 10.1.3 rom. i considered the 10.2 rom but the 10.2 had mixed reviews on the HD+ and the consensus was that 10.1.3 was a stable, mature and smooth rom. I am watching the CM 11 releases closely but it remains a work in progress, although from posters on the thread it seems that it is running almost perfectly. I will switch to CM 11 once verygreen posts a "stable" release - plus you can flash the roms as you wish, so can start with the stable 10.1.3 and then reflash when you're more confident or feel that the CM11 rom is more mature.
My advice would be go for 10.1.3 and follow the guide above. I didn't think the stock rom was that bad, but the 10.1.3 is night and day imho, its smooth, repsonsive and allows lots of funky tweaks. I've had this rom on my HD+ for a few days and am very pleased :fingers-crossed:
all the best with your choice fella
fish
Thanks for the quick responses guys! You've given me a bit more to consider and look into. That was one of the threads I bookmarked yesterday so thanks for pointing out it's validity. A further question that now comes to mind from what you both have said is how much of a hardware difference is there and is that something that can make a performance difference? Guess I'm still gonna be info diving for a bit tonight after work.
KitKat does improve on performance over Jelly Bean, but it's not something that will affect your daily use. I'm currently using CM 10.1.3 (stable) on a Nook HD+ and HD. I'm considering upgrading the HD to CM 10.2.1, as there is a stable build out. I will definitely upgrade to KitKat/CM11 when a stable build is released.
Personally, I only install stable builds. I don't want the hassle of encountering issues with nightlies. I find that CM10.1.3 is extremely stable, and I have not had any problems with it; although battery life is reduced from the original stock ROM, but that's nothing to be worried about. In conclusion, no issues with the CM10.1.3 stable build.
As a note, I also believe the TRIM issue has been fixed with the CM10.2.1 stable too on the Nook HD+; so CM10.2.1 should be fine too, but I haven't tried it yet.
All the best.
roms
Jodo901 said:
Thanks for the quick responses guys! You've given me a bit more to consider and look into. That was one of the threads I bookmarked yesterday so thanks for pointing out it's validity. A further question that now comes to mind from what you both have said is how much of a hardware difference is there and is that something that can make a performance difference? Guess I'm still gonna be info diving for a bit tonight after work.
Click to expand...
Click to collapse
hey jodo
i'm not sure what you mean by hardware difference? if you mean the effectiveness of each rom on the HD+ i suppose its a matter of preference and through trial and error in trying the roms available. It seems that CM11 is considered the faster of the roms available but as said previously this is an on-going rom development and not considered stable.
I considered what i was going to use my HD+ for, which in my case was surfing and reading books/comics and getting the best return on the stupidly low price vs decent spec and awesome screen. I didn't buy it to game as 1. its hardly a powerhouse for gaming and 2. i dislike mobile gaming and prefer PS and XBOX for that sorta thing. My priorities were smoothness, stability, customisation and battery life which i feel 10.1.3 provides, but others may disagree lol.
Fish
Thanks again for the input guys. :good:
I finally have a some time to dig in on the forums a little and maybe get to the rooting later. I'm running very light on the apps at this point. Just some online stuff, ebooks, comics, etc. Mostly looking for more control and customization.
@fishman09 - I thought perhaps there were hardware differences depending on the manufacture date of the Nook HD+ unit but I haven't seen anything like that so I assume it's a non issue. I know this can be something that makes a difference when hacking older game systems (Xbox, PSP, etc)
**********EDIT**********
Thanks again to everyone who gave me their 2 cents on my way into all this fun custom Android stuff on my Nook HD+!!
I have now successfully installed 10.2.1 and so far its working well and looks great.
Another data point: I was in same position as you. Decided to go for a cm11 nightly build (this was back in _Jan). It ran reasonably well, but I wondered if 10.2 would be more stable or better with battery life. It felt about the same, with couple missing things, notably no hiding of soft buttons. So I've now gone back to cm11, a march nightly build. I think it is as good as a $120 tablet is going to get . So I'm pretty happy and staying. I even enabled ART runtime and so far everything has run except asphalt 8.
Just make sure you format and wipe everything after doing a backup during your install process.
My Conclusion...or the time being.
Well after about 3 or 4 days of normal usage with CM 10.2.1 I have decided to go back to the stock version of the Nook.The difference in battery drain did not outweigh the bonuses of the upgraded OS for me at all. I would say the battery life was only about 2/3 as long. This is a big drawback in my opinion considering I really wasn't running anything differently. Yeah, it was a bit prettier and more customizable and I was very impressed with the stability, but it's kind of pointless to have a wireless device that you have to keep plugging in all the time.
Jodo901 said:
Well after about 3 or 4 days of normal usage with CM 10.2.1 I have decided to go back to the stock version of the Nook.The difference in battery drain did not outweigh the bonuses of the upgraded OS for me at all. I would say the battery life was only about 2/3 as long. This is a big drawback in my opinion considering I really wasn't running anything differently. Yeah, it was a bit prettier and more customizable and I was very impressed with the stability, but it's kind of pointless to have a wireless device that you have to keep plugging in all the time.
Click to expand...
Click to collapse
I got my new Nook+ last week and pondered whether to root and which ROM to use. After one week of use, I have no real issues keeping it stock for now but will follow the kitkat development for possible future rooting.

How to get the most out of my Nook

Hey guys, been using cryogen on my nook for years now, and while I personally believe that it is much faster than stock, it always seems to eventually bog down, and run slow. While there might be an issue with apps or something else I'm doing wrong that keeps slowing down my nook that's not the MAIN purpose of this forum. I'm looking for the best build and settings to get the most out of my nook. Currently i'm running a recent nightly build with CM11, but was thinking about switching to snapshot for a more stable release. There are two things I want to know before doing this:
1. what is the fastest and most stable build available? I've heard in forums about a liquidsmooth build, slim builds, and obviously used nightlys but which is the best? Also CM10 or CM11 does it matter which?
2. What is the best settings for max performance? On nightly I can use the governor to up the CPU, and I know there's a ram setting, but what about the I/O scheduler? whats the optimal setting for this? Also whats the best map performance settings AND what is the best settings for performance/battery for when i'm not playing games but maybe just web browsing.
ONE FINAL NOTE:
There was a time where I enjoyed spending a week tweaking roms and trying to make experimental roms work but now I don't have time. SO what I'm looking for is a STABLE rom that doesn't need much tweaking and can simple be installed through CWM, and either the basic settings to max performance, or a third party program that will do it for me.
PS: these forums have been good to me these past years so I want to also shout out to everyone that contributes and say thank you.
Others may have differing opinions but I have tried all ROMs available and they all have their ups and downs. The nook hd + is a serviceable tablet and well worth what I paid for it but I have given up on the idea of finding a perfect configuration. My nook performs well enough at the moment to prevent my cheap nature from buying another tab.
That being said I am getting my son a nvidia shield tablet for Christmas so he will have to share
mcord11758 said:
Others may have differing opinions but I have tried all ROMs available and they all have their ups and downs. The nook hd + is a serviceable tablet and well worth what I paid for it but I have given up on the idea of finding a perfect configuration. My nook performs well enough at the moment to prevent my cheap nature from buying another tab.
That being said I am getting my son a nvidia shield tablet for Christmas so he will have to share
Click to expand...
Click to collapse
I whole-heartedly agree with everything you said.
Except for the part about sharing your son's Christmas present. Good luck with that!
Better than nothing
Given that the first two reply were utterly useless I figured I would post what I have found so far. . . A rom called SlimKat is the fastest rom for the nook hd+ I personally have found. I was hoping that others would post USEFUL information to this forum reguarding other ROMS rather than just stating that the nook is limited (which everyone that owns one already knows hints why were are here in the first place). But if you too are looking for a fast rom try here: http://forum.xda-developers.com/nook-hd/development/rom-dev-slimkat-4-4-4-build-8-1-t2894247/page6
I've yet to tweak it, so i'm not sure if there is a govenor on there or a way to improve how the RAM is used. And I still have no clue what an I/O scheduler does, but I didn't see one on this rom.
Useless, honest, whatever
Try mokee in original android development section. Nightlies are active, pretty stable , and it is interesting. Yes it is in Chinese at first but you can change language
I like slim kat but I get freezes when streaming videos for long periods.
http://forum.xda-developers.com/showthread.php?t=2761812
mcord11758 said:
Useless, honest, whatever
Try mokee in original android development section. Nightlies are active, pretty stable , and it is interesting. Yes it is in Chinese at first but you can change language
I like slim kat but I get freezes when streaming videos for long periods.
http://forum.xda-developers.com/showthread.php?t=2761812
Click to expand...
Click to collapse
That's probably fixed in the LiquidSmooth F2FS version (Pg. 5 of the LS thread), as it uses different PVR source. FWIW.
I actually find asking to be a moot point.
The roms will act differently according to your needs and uses. One rom may work well for someone and not well for another who's use of it constantly goes up against a bug or other problem. Or maybe you just won't like it.
Short story, just do a full recovery backup of what you currently use and then try the others. When you like one try it for a week. If you dislike it just restore the full backup of your choice - if you make full backups of each of them you can go back to any quite fast just the way you left it.
sandsofmyst said:
The roms will act differently according to your needs and uses.
Click to expand...
Click to collapse
And hardware (revisions). Take two identical tabs, install identical ROMs using identical methods, and get two different results. One crashes and reboots, the other never does. On a third the battery life suffers or the WifFi misbehaves.
sandsofmyst said:
Short story, just do a full recovery backup of what you currently use and then try the others. When you like one try it for a week. If you dislike it just restore the full backup of your choice - if you make full backups of each of them you can go back to any quite fast just the way you left it.
Click to expand...
Click to collapse
And of course, be prepared to restart and repeat the entire process. Because sooner or later you're going to install something that will sour the milk. Or you just like doing it because it's just so much fun!
jb0756: I've tried them all. The variables are staggering. It's amazing these things work as well as they do.
mcord11758 said it best. The HD+ is ... "serviceable."
wellersl said:
Or you just like doing it because it's just so much fun!
Click to expand...
Click to collapse
If its not up your alley then don't go there. There are things in the ocean and a breeze in the air.

Best install for HD+ 4.3 too many versions for dummy

trying to install 4.3 or higher so new health watch will work. There is so many versions I am confused (which is easy to do) what IS CM 10.2 ? is this the version I need or do I need to use something else and what is the best version of Roms to use. I hope this is not too confusing if so it is because I am confused. Would some one please help me out.
cutting to the chase:
I need 4.3 or higher on my nook HD+.
Thanks
Retired
New age electronics a little fuzzy for me. The install for dummies has the cm11 file site closed.
Is there a newbie install guide for the most stable rom install ? Sorry if my terminology is incorrect. I would like to use a site that has all of the parts needed listed and can be down loaded. I need at least 4.3 or higher. As you can tell I am very new at this and would appreciate any help.
From reading yesterday it looks like cm 10.1.3 is the most stable or is there anew one on the scene.
Careful one
carefulone said:
New age electronics a little fuzzy for me. The install for dummies has the cm11 file site closed.
Is there a newbie install guide for the most stable rom install ? Sorry if my terminology is incorrect. I would like to use a site that has all of the parts needed listed and can be down loaded. I need at least 4.3 or higher. As you can tell I am very new at this and would appreciate any help.
From reading yesterday it looks like cm 10.1.3 is the most stable or is there anew one on the scene.
Careful one
Click to expand...
Click to collapse
I still think cm10.1.3 is best.
What do you mean the install for dummies has cm11 file site closed? Do you mean my install for dummies thread? The links there still work.
Sent from my SM-T707V using XDA Premium HD app
I see that you still prefer 10.1.3, leapinlar, just curious as to why. I mean I ask because I know 4.4 brings things that should be useful especially TRIM for our older NHD hardware which it should certainly benefit from. I just got an 8GB NHD (I have a 32GB microSD for expansion as well) from a pawn shop several hours ago for $10 (had 2.1 on it, then upgraded to 2.2.1 and it seems to work fine overall) and it's got no issues. My Wife and I communicate using YIM (Yahoo Instant Messenger) and that won't work on the NHD (it's a Yahoo issue, not the NHD) so we're migrating over to using Hangouts which is fine as well.
But now that we have two NHDs I can goof off with mine. She's had one for a few years that I get to play with on occasion, I put CM11 on it a long time ago and it's been fine but tonight I made a backup of mine after a complete de-registration (from the previous owner) so it was clean as a whistle, then I simply restored that backup to hers so now we have to "almost" factory-fresh 2.2.1 NHDs to work with.
I remember when we first got the NHD back in late 2013 the stock software was crap and laggy which is why I pushed CM on it as soon as I could (CM10, then later on CM11). Obviously I want to eek out the best performance I can from this device even in spite of the age so, again, I'm curious to why you prefer 10.1.3 - I'm at a point right now where I'd like to install a custom ROM since I can do more experimentation with my NHD that I just got for $10 than the Wife's, so I'm just "on the market" one could say to see what the options are.
I can't tolerate Lollipop so I won't be going anywhere near Android 5.x or CM12 for any reason; I prefer Android 4.4.x at this point but even after all this time CM still doesn't have a stable CM11 build and at this point I doubt it'll ever happen so, since 10.1.3 appears as a stable option I'm considering it.
I'm guessing you run your 10.1.3 from the eMMC and not SD card, but I don't think I've ever seen you say which way you do things. And just to ask: any issues on your NHD with 10.1.3 that you'd care to mention, anything at all? Everything runs smooth and great, etc? Do you use a custom kernel with any tweaks/governors/etc? If you can answer here, awesome, if not that's fine, perhaps the info is someplace buried in another thread which I need to look for.
You've got vastly more experience with the NHD than I do and your guides and your assistance with these devices (and the Nook Color and Tablet as well) are invaluable resources here so thanks for your continuing efforts.
I'm just looking to get the best performance/battery life/etc from this Nook HD, like most anyone I suppose, so any suggestions are very welcome, indeed.
br0adband said:
I see that you still prefer 10.1.3, leapinlar, just curious as to why. I mean I ask because I know 4.4 brings things that should be useful especially TRIM for our older NHD hardware which it should certainly benefit from. I just got an 8GB NHD (I have a 32GB microSD for expansion as well) from a pawn shop several hours ago for $10 (had 2.1 on it, then upgraded to 2.2.1 and it seems to work fine overall) and it's got no issues. My Wife and I communicate using YIM (Yahoo Instant Messenger) and that won't work on the NHD (it's a Yahoo issue, not the NHD) so we're migrating over to using Hangouts which is fine as well.
But now that we have two NHDs I can goof off with mine. She's had one for a few years that I get to play with on occasion, I put CM11 on it a long time ago and it's been fine but tonight I made a backup of mine after a complete de-registration (from the previous owner) so it was clean as a whistle, then I simply restored that backup to hers so now we have to "almost" factory-fresh 2.2.1 NHDs to work with.
I remember when we first got the NHD back in late 2013 the stock software was crap and laggy which is why I pushed CM on it as soon as I could (CM10, then later on CM11). Obviously I want to eek out the best performance I can from this device even in spite of the age so, again, I'm curious to why you prefer 10.1.3 - I'm at a point right now where I'd like to install a custom ROM since I can do more experimentation with my NHD that I just got for $10 than the Wife's, so I'm just "on the market" one could say to see what the options are.
I can't tolerate Lollipop so I won't be going anywhere near Android 5.x or CM12 for any reason; I prefer Android 4.4.x at this point but even after all this time CM still doesn't have a stable CM11 build and at this point I doubt it'll ever happen so, since 10.1.3 appears as a stable option I'm considering it.
I'm guessing you run your 10.1.3 from the eMMC and not SD card, but I don't think I've ever seen you say which way you do things. And just to ask: any issues on your NHD with 10.1.3 that you'd care to mention, anything at all? Everything runs smooth and great, etc? Do you use a custom kernel with any tweaks/governors/etc? If you can answer here, awesome, if not that's fine, perhaps the info is someplace buried in another thread which I need to look for.
You've got vastly more experience with the NHD than I do and your guides and your assistance with these devices (and the Nook Color and Tablet as well) are invaluable resources here so thanks for your continuing efforts.
I'm just looking to get the best performance/battery life/etc from this Nook HD, like most anyone I suppose, so any suggestions are very welcome, indeed.
Click to expand...
Click to collapse
I prefer 10.1.3 because I have never had one issue with it. I tried 10.2 while it was still in nightlies and had issues so moved back. Now that 10.2.1 is stable it may be ok. I tried Jon Lee's 10.2 with the tweaked kernel and found it unstable.
And I do run from emmc, but have run from SD with no issues using a good SD.
I recommend against 11 for the HD+ for the very reason you tout it, TRIM. I have seen a lot of HD+ get bricked by TRIM even though the kernel is supposed to be fixed to prevent that. It is just certain models of HD+, others seem safe. I have not heard of any HD's getting bricked though.
Sent from my SM-T707V using XDA Premium HD app
Just tried CM11 (the 8-13 Nightly) and was somewhat disappointed in some aspects; I have a bunch of content on the Google Play Movies & TV side of things and that app won't play any videos at all on CM11, not sure what the issue is and I'm not interested in bothering with it so I'm rolling back to pure stock 2.2.1 for the time being.
I most likely will give 10.1.3 a shot, it can't hurt I suppose and I figure it'll be pretty snappy all around.
Any idea if there are any custom kernels that might function on that (meaning 10.1.3) to allow for more options for tweaking things (governors and I/O, etc)? I'll do more research but for now as stated I'll stick with pure stock since it seems to work ok.
Thanks for the response...
br0adband said:
Just tried CM11 (the 8-13 Nightly) and was somewhat disappointed in some aspects; I have a bunch of content on the Google Play Movies & TV side of things and that app won't play any videos at all on CM11, not sure what the issue is and I'm not interested in bothering with it so I'm rolling back to pure stock 2.2.1 for the time being.
I most likely will give 10.1.3 a shot, it can't hurt I suppose and I figure it'll be pretty snappy all around.
Any idea if there are any custom kernels that might function on that (meaning 10.1.3) to allow for more options for tweaking things (governors and I/O, etc)? I'll do more research but for now as stated I'll stick with pure stock since it seems to work ok.
Thanks for the response...
Click to expand...
Click to collapse
Yes, I think the yellow kernel by Jon Lee has a 10.1.3 version. But I found it unstable.
Sent from my SM-T707V using XDA Premium HD app
I also need to know which ROM is best for 4.3+. I have an android wear watch I need to pair. Should I use cm 10.2 or 11? Which ROM of the better cm should I use? Much obliged for your help and assistance.
bump

Categories

Resources