Database Develop

[Q] Nook HD+ best rom for me, help!

I'm new to this but I understand the root & flash process.
I just need some help selecting & locating a rom for my nook hd.
I don't like the Barnes & noble os as it seems a little laggy.
Therefore I'd like to replace if with a proper android rom but I get confused with what the difference between stock & cm10 is.
I just want a stable android rom that's fast for browsing & will play netflix well.
Any help is appreciated.
Thanks

Stock ROM is the default Barnes & Noble operating system, the one you're using now. The term "stock" is used to describe this ROM, as it's the default ROM that comes installed with the Nook.
There are other ROMs available, so that you can customise your Nook. The one I would recommend, so that you can comfortably just use Android on a daily basis without worrying about anything else is CyanogenMod 10.1.3 (stable). This is a stable ROM, and ready for daily use without worrying about anything else. That's CyanogenMod (CM) 10.1.3. Do NOT install CyanogenMod 10.2, as this is a nightly version and not ready for daily use. You can install CM10.2 if you desire, but don't expect it to be perfect; there may be few issues and problems here and there.
Installing CyanogenMod 10.1.3 runs Android version 4.2.2, so that's Jelly Bean. CM10.2 runs Android 4.3 (however, this isn't stable yet). Here's a beginners guide to installing CyanogenMod for your Nook: http://forum.xda-developers.com/showthread.php?t=2317500
All the best, if you require any assistance, feel free to reply back.

For what it's worth, performance on my Nook HD+ with CyanogenMod 10.1.3 is absolute garbage. 10x worse than stock B&N ROM, everything lags to hell and back. Even scrolling the damn app menu lags, and I'm constantly seeing "<Insert App Name Here> isn't responding. Do you want to close it?" Everything, even the system idle process. I don't know what to advise as there seems to be no general consensus as to what's the best ROM, everything's under development, the only ROM listed under Original Android Development (which I'm hoping is as close as possible to stock) doesn't work.

rpop said:
For what it's worth, performance on my Nook HD+ with CyanogenMod 10.1.3 is absolute garbage. 10x worse than stock B&N ROM, everything lags to hell and back. Even scrolling the damn app menu lags, and I'm constantly seeing "<Insert App Name Here> isn't responding. Do you want to close it?" Everything, even the system idle process. I don't know what to advise as there seems to be no general consensus as to what's the best ROM, everything's under development, the only ROM listed under Original Android Development (which I'm hoping is as close as possible to stock) doesn't work.
Click to expand...
Click to collapse
My experience wasn't like that at all. While I wouldn't say it was blistering, it did seem on par or better than the Stock ROM. swiping was just a smidge laggy using Nova Prime.
I went on to Carbon and while it has a very nice feature set, it seems a good bit LAGGIER than the previous ROMs. I've been told that SlimBean runs nicely though, so I'm going to play with Carbon a little more but likely go on to that one when I decide to flash again.

I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.

rpop said:
I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.
Click to expand...
Click to collapse
Hi, I have been running 10.2 nightly for awhile now and have my tablet running several hours a day surfing Web, watching movies, reading, etc. and I have not had any of the lag or slowdown that you mention. I have had no random reboots or any trouble, I think it performs better than stock rom.
I am very happy with this setup.
So I hope this helps you some.
Sent from my BN Nook HD using Tapatalk 4

rpop said:
I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.
Click to expand...
Click to collapse
It is not CM10.1.3, it is your device being hit with the need for trim. Your stock would act the same way. Read in the CM10.2 thread.
Sent from my BN NookHD+ using xda premium

Oh my god, you're right! I have to admit I noticed the TRIM issue when I first installed CyanogenMod (hard to miss, it's at the top in big red letters ). I realized it's a perfect match for the performance degradation I'd been seeing, but I dismissed it as a possible cause out of a naive belief that there's no way a manufacturer could ship something that crippled. I thought surely it would have been caught during testing. I also didn't want to read a 100+ page thread to figure out exactly what the issue is when the search was broken. I've taken a few hours and caught up on the thread now... I guess if it looks like cheese, and smells like cheese... it's gotta be cheese.
I've got MAG2GA & 0x000015 memory chips, looks like my only option is to brick it and do a warranty swap I'm curious as to how the other people above reported good experiences; are you guys purposely installing builds with TRIM enabled because you know have good memory chips? Seems to me almost every ROM around here has it purposely disabled. Either that or you've barely used the internal flash memory.
I guess the first recommendation for Kido44 would be to figure out what kind of memory you have, so you know if you can install a kernel with TRIM enabled. The degradation in performance without it is so bad, I want to fling it at the wall. I guess it might not be noticeable right away for you if all you're planning on doing is some light web browsing and Netflix viewing, but you'll run into it at some point and weep. I suspect you're already getting there if the stock ROM is starting to lag a little bit.
As always, thanks to leapinlar for pointing me in the right direction

I've been happy with CM 10.1 for a while, ran really stable without any major hiccups, but the lag got so bad due to the lack of trim that I decided to take the plunge and risk installing 10.2 Milestone 1 with a trim-enabled kernel. I also have a bad emmc chip but I'm willing to risk it.
It's not what I'd recommend for everyone, but that's my experience.

episode96 said:
I've been happy with CM 10.1 for a while, ran really stable without any major hiccups, but the lag got so bad due to the lack of trim that I decided to take the plunge and risk installing 10.2 Milestone 1 with a trim-enabled kernel. I also have a bad emmc chip but I'm willing to risk it.
It's not what I'd recommend for everyone, but that's my experience.
Click to expand...
Click to collapse
Carbon B11 + cm10.1.3 kernel has been working well on my HD+ for a while. It's almost as fast as the trimmed cm10.2 but without the fault risk.

jamus28 said:
Carbon B11 + cm10.1.3 kernel has been working well on my HD+ for a while. It's almost as fast as the trimmed cm10.2 but without the fault risk.
Click to expand...
Click to collapse
Not sure I understand. Won't it get slow eventually because of the lack of trim?

Sure, but it was still usable after several weeks.

I like Slimrom for the most part and observedly better than CM 10.1.3 on my nook hd+. Seems faster and more responsive, and if you use Puffin browser, it seems like it's 2x faster compared to stock browser (that's just my imo, ymmv). Anyway, I've tested only 3 roms so far, slim, cm, and carbon, so my question is, are there any roms that you guys recommended on the hd+ that can maybe compare with slim? Slim doesn't seem to be officially supported.

[Q] Leave Well Enough Alone (Finally)???

At the risk of sounding a touch naive, I feel compelled to ask the following.
Having owned an original 7 inch Nook that I fully converted to 4.1 and now the very satisfied owner of an HD+ that I fully converted to 4.2.2 some time ago, is there any "real world" advantage to moving up to 4.4 with the following considerations:
1. Under a fully transformed eMMc 4.2.2, I am experiencing no operational problems or issues.
2. My primary use for the HD+ is reading using both the Nook and Kindle apps, occasionally watching movies using the MX Player app, using a small handful of other apps primarily for current events and weather, email, and using the larger screen to view digital photos taken on my trips.
Under 4.2.2, it handles all of the above with few, if any, real hiccups.
If my actual day-to-day usage remains as above, will 4.4 really offer any substantive changes?
With that said, have I finally arrived at the "leave well enough alone" time in my ongoing transformations and updates?
Thanks in advance for any relevant comments and/or advice.

I'm just going to assume you are talking about CM10.1 (4.2) and CM11 (4.4).
CM11 is still a Nightly, so i would not recommend it as you want to use your HD+ for normal activities and not to experiment with.
To me, CM10.2 (4.3) ist the most stable version, but if you don't encounter any problem with 10.1, then there is no real need to upgrade IMO.

If everything is working I would let it ride. If you do decide to move forward make a backup so you can go back.

I'm in kind of the same boat. I've been using the Xperia tweaked Carbon ROM which is 4.2.2 and have yet to see a real compelling reason to move from it. My desire to constantly flash something and try new roms is outweighed by my desire to have a stable, useful device.
Sent from my LG-LS970 using xda app-developers app

Thanks.
"My desire to constantly flash something and try new roms is outweighed by my desire to have a stable, useful device." Could not have phrased it better myself. Have definitely reached the point where experimenting, rooting, fully transforming, etc. no longer works as its own stimulant in the face of a very stable, reliable, eMMc conversion that works the way I (currently) need it to. Now if Amazon would bring out an 8.9 inch version of the DX that I have with a touchscreen and back light...hmm!

I started with various CM11 nightly builds, then "downgraded" to CM10.2 and now am happier. Various apps I had problems with are now working. I miss a few minor things like no transparent status bar and soft buttons not hiding in some apps, but I prefer the stability. I may try CM11 later at some point.

Hmm... Your mileage may vary...
I have been upgrading my Nook HD+ steadily until verygreen's 1/18 build of CM11. I have installed the pa_gapps-modular-full-4.4.2-20140111-signed gapps package. I have access to just about everything I need on the Google Play store, Amazon Store, 1mobile store. It is solid. Doesn't reboot without reason. And except for a couple of non-standard apps, everything runs smooth and good. I couldn't be happier with this version of KitKat and I like it a lot better than JellyBean, and my battery life is very good, even when running intensive games or using WiFi heavily.
Is there a real reason to upgrade? That is a personal preference. I would say yes, as my experience has been so good. Even the upgrade process was fairly painless using verygreen's instructions. Just had to load a new CWM, reboot into it and flash the new rom and gapps and I was on my way. Fair to say, I haven't been upgrading to every new nightly that comes out. Viewing the changelogs, I don't see any obvious reason to do so, and so I am waiting for any changes that verygreen deems necessary to flash.
That's my two-pence worth of opinion. I hope that helps alleviate any fears you might have for upgrading.

Thanks to all for your replies and comments. Looks like I will stay put with 10.1/4.2.2 for the time being as all is "really" well!

How to get the most out of my Nook

Hey guys, been using cryogen on my nook for years now, and while I personally believe that it is much faster than stock, it always seems to eventually bog down, and run slow. While there might be an issue with apps or something else I'm doing wrong that keeps slowing down my nook that's not the MAIN purpose of this forum. I'm looking for the best build and settings to get the most out of my nook. Currently i'm running a recent nightly build with CM11, but was thinking about switching to snapshot for a more stable release. There are two things I want to know before doing this:
1. what is the fastest and most stable build available? I've heard in forums about a liquidsmooth build, slim builds, and obviously used nightlys but which is the best? Also CM10 or CM11 does it matter which?
2. What is the best settings for max performance? On nightly I can use the governor to up the CPU, and I know there's a ram setting, but what about the I/O scheduler? whats the optimal setting for this? Also whats the best map performance settings AND what is the best settings for performance/battery for when i'm not playing games but maybe just web browsing.
ONE FINAL NOTE:
There was a time where I enjoyed spending a week tweaking roms and trying to make experimental roms work but now I don't have time. SO what I'm looking for is a STABLE rom that doesn't need much tweaking and can simple be installed through CWM, and either the basic settings to max performance, or a third party program that will do it for me.
PS: these forums have been good to me these past years so I want to also shout out to everyone that contributes and say thank you.

Others may have differing opinions but I have tried all ROMs available and they all have their ups and downs. The nook hd + is a serviceable tablet and well worth what I paid for it but I have given up on the idea of finding a perfect configuration. My nook performs well enough at the moment to prevent my cheap nature from buying another tab.
That being said I am getting my son a nvidia shield tablet for Christmas so he will have to share

mcord11758 said:
Others may have differing opinions but I have tried all ROMs available and they all have their ups and downs. The nook hd + is a serviceable tablet and well worth what I paid for it but I have given up on the idea of finding a perfect configuration. My nook performs well enough at the moment to prevent my cheap nature from buying another tab.
That being said I am getting my son a nvidia shield tablet for Christmas so he will have to share
Click to expand...
Click to collapse
I whole-heartedly agree with everything you said.
Except for the part about sharing your son's Christmas present. Good luck with that!

Better than nothing
Given that the first two reply were utterly useless I figured I would post what I have found so far. . . A rom called SlimKat is the fastest rom for the nook hd+ I personally have found. I was hoping that others would post USEFUL information to this forum reguarding other ROMS rather than just stating that the nook is limited (which everyone that owns one already knows hints why were are here in the first place). But if you too are looking for a fast rom try here: http://forum.xda-developers.com/nook-hd/development/rom-dev-slimkat-4-4-4-build-8-1-t2894247/page6
I've yet to tweak it, so i'm not sure if there is a govenor on there or a way to improve how the RAM is used. And I still have no clue what an I/O scheduler does, but I didn't see one on this rom.

Useless, honest, whatever
Try mokee in original android development section. Nightlies are active, pretty stable , and it is interesting. Yes it is in Chinese at first but you can change language
I like slim kat but I get freezes when streaming videos for long periods.
http://forum.xda-developers.com/showthread.php?t=2761812

mcord11758 said:
Useless, honest, whatever
Try mokee in original android development section. Nightlies are active, pretty stable , and it is interesting. Yes it is in Chinese at first but you can change language
I like slim kat but I get freezes when streaming videos for long periods.
http://forum.xda-developers.com/showthread.php?t=2761812
Click to expand...
Click to collapse
That's probably fixed in the LiquidSmooth F2FS version (Pg. 5 of the LS thread), as it uses different PVR source. FWIW.

I actually find asking to be a moot point.
The roms will act differently according to your needs and uses. One rom may work well for someone and not well for another who's use of it constantly goes up against a bug or other problem. Or maybe you just won't like it.
Short story, just do a full recovery backup of what you currently use and then try the others. When you like one try it for a week. If you dislike it just restore the full backup of your choice - if you make full backups of each of them you can go back to any quite fast just the way you left it.

sandsofmyst said:
The roms will act differently according to your needs and uses.
Click to expand...
Click to collapse
And hardware (revisions). Take two identical tabs, install identical ROMs using identical methods, and get two different results. One crashes and reboots, the other never does. On a third the battery life suffers or the WifFi misbehaves.
sandsofmyst said:
Short story, just do a full recovery backup of what you currently use and then try the others. When you like one try it for a week. If you dislike it just restore the full backup of your choice - if you make full backups of each of them you can go back to any quite fast just the way you left it.
Click to expand...
Click to collapse
And of course, be prepared to restart and repeat the entire process. Because sooner or later you're going to install something that will sour the milk. Or you just like doing it because it's just so much fun!
jb0756: I've tried them all. The variables are staggering. It's amazing these things work as well as they do.
mcord11758 said it best. The HD+ is ... "serviceable."

wellersl said:
Or you just like doing it because it's just so much fun!
Click to expand...
Click to collapse
If its not up your alley then don't go there. There are things in the ocean and a breeze in the air.

Best install for HD+ 4.3 too many versions for dummy

trying to install 4.3 or higher so new health watch will work. There is so many versions I am confused (which is easy to do) what IS CM 10.2 ? is this the version I need or do I need to use something else and what is the best version of Roms to use. I hope this is not too confusing if so it is because I am confused. Would some one please help me out.
cutting to the chase:
I need 4.3 or higher on my nook HD+.
Thanks

Retired
New age electronics a little fuzzy for me. The install for dummies has the cm11 file site closed.
Is there a newbie install guide for the most stable rom install ? Sorry if my terminology is incorrect. I would like to use a site that has all of the parts needed listed and can be down loaded. I need at least 4.3 or higher. As you can tell I am very new at this and would appreciate any help.
From reading yesterday it looks like cm 10.1.3 is the most stable or is there anew one on the scene.
Careful one

carefulone said:
New age electronics a little fuzzy for me. The install for dummies has the cm11 file site closed.
Is there a newbie install guide for the most stable rom install ? Sorry if my terminology is incorrect. I would like to use a site that has all of the parts needed listed and can be down loaded. I need at least 4.3 or higher. As you can tell I am very new at this and would appreciate any help.
From reading yesterday it looks like cm 10.1.3 is the most stable or is there anew one on the scene.
Careful one
Click to expand...
Click to collapse
I still think cm10.1.3 is best.
What do you mean the install for dummies has cm11 file site closed? Do you mean my install for dummies thread? The links there still work.
Sent from my SM-T707V using XDA Premium HD app

I see that you still prefer 10.1.3, leapinlar, just curious as to why. I mean I ask because I know 4.4 brings things that should be useful especially TRIM for our older NHD hardware which it should certainly benefit from. I just got an 8GB NHD (I have a 32GB microSD for expansion as well) from a pawn shop several hours ago for $10 (had 2.1 on it, then upgraded to 2.2.1 and it seems to work fine overall) and it's got no issues. My Wife and I communicate using YIM (Yahoo Instant Messenger) and that won't work on the NHD (it's a Yahoo issue, not the NHD) so we're migrating over to using Hangouts which is fine as well.
But now that we have two NHDs I can goof off with mine. She's had one for a few years that I get to play with on occasion, I put CM11 on it a long time ago and it's been fine but tonight I made a backup of mine after a complete de-registration (from the previous owner) so it was clean as a whistle, then I simply restored that backup to hers so now we have to "almost" factory-fresh 2.2.1 NHDs to work with.
I remember when we first got the NHD back in late 2013 the stock software was crap and laggy which is why I pushed CM on it as soon as I could (CM10, then later on CM11). Obviously I want to eek out the best performance I can from this device even in spite of the age so, again, I'm curious to why you prefer 10.1.3 - I'm at a point right now where I'd like to install a custom ROM since I can do more experimentation with my NHD that I just got for $10 than the Wife's, so I'm just "on the market" one could say to see what the options are.
I can't tolerate Lollipop so I won't be going anywhere near Android 5.x or CM12 for any reason; I prefer Android 4.4.x at this point but even after all this time CM still doesn't have a stable CM11 build and at this point I doubt it'll ever happen so, since 10.1.3 appears as a stable option I'm considering it.
I'm guessing you run your 10.1.3 from the eMMC and not SD card, but I don't think I've ever seen you say which way you do things. And just to ask: any issues on your NHD with 10.1.3 that you'd care to mention, anything at all? Everything runs smooth and great, etc? Do you use a custom kernel with any tweaks/governors/etc? If you can answer here, awesome, if not that's fine, perhaps the info is someplace buried in another thread which I need to look for.
You've got vastly more experience with the NHD than I do and your guides and your assistance with these devices (and the Nook Color and Tablet as well) are invaluable resources here so thanks for your continuing efforts.
I'm just looking to get the best performance/battery life/etc from this Nook HD, like most anyone I suppose, so any suggestions are very welcome, indeed.

br0adband said:
I see that you still prefer 10.1.3, leapinlar, just curious as to why. I mean I ask because I know 4.4 brings things that should be useful especially TRIM for our older NHD hardware which it should certainly benefit from. I just got an 8GB NHD (I have a 32GB microSD for expansion as well) from a pawn shop several hours ago for $10 (had 2.1 on it, then upgraded to 2.2.1 and it seems to work fine overall) and it's got no issues. My Wife and I communicate using YIM (Yahoo Instant Messenger) and that won't work on the NHD (it's a Yahoo issue, not the NHD) so we're migrating over to using Hangouts which is fine as well.
But now that we have two NHDs I can goof off with mine. She's had one for a few years that I get to play with on occasion, I put CM11 on it a long time ago and it's been fine but tonight I made a backup of mine after a complete de-registration (from the previous owner) so it was clean as a whistle, then I simply restored that backup to hers so now we have to "almost" factory-fresh 2.2.1 NHDs to work with.
I remember when we first got the NHD back in late 2013 the stock software was crap and laggy which is why I pushed CM on it as soon as I could (CM10, then later on CM11). Obviously I want to eek out the best performance I can from this device even in spite of the age so, again, I'm curious to why you prefer 10.1.3 - I'm at a point right now where I'd like to install a custom ROM since I can do more experimentation with my NHD that I just got for $10 than the Wife's, so I'm just "on the market" one could say to see what the options are.
I can't tolerate Lollipop so I won't be going anywhere near Android 5.x or CM12 for any reason; I prefer Android 4.4.x at this point but even after all this time CM still doesn't have a stable CM11 build and at this point I doubt it'll ever happen so, since 10.1.3 appears as a stable option I'm considering it.
I'm guessing you run your 10.1.3 from the eMMC and not SD card, but I don't think I've ever seen you say which way you do things. And just to ask: any issues on your NHD with 10.1.3 that you'd care to mention, anything at all? Everything runs smooth and great, etc? Do you use a custom kernel with any tweaks/governors/etc? If you can answer here, awesome, if not that's fine, perhaps the info is someplace buried in another thread which I need to look for.
You've got vastly more experience with the NHD than I do and your guides and your assistance with these devices (and the Nook Color and Tablet as well) are invaluable resources here so thanks for your continuing efforts.
I'm just looking to get the best performance/battery life/etc from this Nook HD, like most anyone I suppose, so any suggestions are very welcome, indeed.
Click to expand...
Click to collapse
I prefer 10.1.3 because I have never had one issue with it. I tried 10.2 while it was still in nightlies and had issues so moved back. Now that 10.2.1 is stable it may be ok. I tried Jon Lee's 10.2 with the tweaked kernel and found it unstable.
And I do run from emmc, but have run from SD with no issues using a good SD.
I recommend against 11 for the HD+ for the very reason you tout it, TRIM. I have seen a lot of HD+ get bricked by TRIM even though the kernel is supposed to be fixed to prevent that. It is just certain models of HD+, others seem safe. I have not heard of any HD's getting bricked though.
Sent from my SM-T707V using XDA Premium HD app

Just tried CM11 (the 8-13 Nightly) and was somewhat disappointed in some aspects; I have a bunch of content on the Google Play Movies & TV side of things and that app won't play any videos at all on CM11, not sure what the issue is and I'm not interested in bothering with it so I'm rolling back to pure stock 2.2.1 for the time being.
I most likely will give 10.1.3 a shot, it can't hurt I suppose and I figure it'll be pretty snappy all around.
Any idea if there are any custom kernels that might function on that (meaning 10.1.3) to allow for more options for tweaking things (governors and I/O, etc)? I'll do more research but for now as stated I'll stick with pure stock since it seems to work ok.
Thanks for the response...

br0adband said:
Just tried CM11 (the 8-13 Nightly) and was somewhat disappointed in some aspects; I have a bunch of content on the Google Play Movies & TV side of things and that app won't play any videos at all on CM11, not sure what the issue is and I'm not interested in bothering with it so I'm rolling back to pure stock 2.2.1 for the time being.
I most likely will give 10.1.3 a shot, it can't hurt I suppose and I figure it'll be pretty snappy all around.
Any idea if there are any custom kernels that might function on that (meaning 10.1.3) to allow for more options for tweaking things (governors and I/O, etc)? I'll do more research but for now as stated I'll stick with pure stock since it seems to work ok.
Thanks for the response...
Click to expand...
Click to collapse
Yes, I think the yellow kernel by Jon Lee has a 10.1.3 version. But I found it unstable.
Sent from my SM-T707V using XDA Premium HD app

I also need to know which ROM is best for 4.3+. I have an android wear watch I need to pair. Should I use cm 10.2 or 11? Which ROM of the better cm should I use? Much obliged for your help and assistance.

bump

Best Nook HD+ Daily Driver in 2017?

If anyone is reading this in 2017
I ran CM11 for quite a while, and performance ground to a halt. Maybe there's not a ROM out there that doesn't need to be reflashed every once in a while, but I'm curious what folks have found viable as a daily driver. I'm looking at new tablets, but wouldn't mind getting the old HD+ in give-to-a-niece-or-nephew condition if nothing else.
I semi-accidentally flashed Nougat from Amaces' thread, and it's a big improvement over my bogged-down CM11 build, but has some display and battery glitches. I'm grabbing his/her most recent Marshmallow build to try now.
Any thoughts on what's the most stable and best performance? Does anyone else find their system slowing way down over time, without a fresh install?

I had had the same good experience with CM11 until mid last year when many commonly used apps started to become unresponsive and oftentime crashed (force-closed). So over the holidays break I took the plunge and upgraded to Amaces' experimental build lnos_ovation-ota-NMF26Q.170104, so far the performance is as good as it used to be with CM11.

Taosaur said:
If anyone is reading this in 2017
I ran CM11 for quite a while, and performance ground to a halt. Maybe there's not a ROM out there that doesn't need to be reflashed every once in a while, but I'm curious what folks have found viable as a daily driver. I'm looking at new tablets, but wouldn't mind getting the old HD+ in give-to-a-niece-or-nephew condition if nothing else.
I semi-accidentally flashed Nougat from Amaces' thread, and it's a big improvement over my bogged-down CM11 build, but has some display and battery glitches. I'm grabbing his/her most recent Marshmallow build to try now.
Any thoughts on what's the most stable and best performance? Does anyone else find their system slowing way down over time, without a fresh install?
Click to expand...
Click to collapse
Hi, I'm in the same boat as you my friend.
Decided to dig up my old nook HD+ I hadn't use for about a 2 years and found it had carbonrom (jellybean 4.2.2) on it. I remember really getting frustrated at the frequent reboots but it was still better than the extremely laggy CM builds that were available at the time.
Need something extremely stable as I plan to hand this off to my dad who quite non-tech-savvy but enjoys a few time killer games.
How is the performance on Marshmallow? I'm kinda still hesitant to upgrade too far to the latest android from the fear of poor performance due to higher hardware requirements for newer generations of android

I am also upgrading for the issues you mentioned. Netflix and YouTube became slow and as some people have reported would not play videos due to thinking they were not connected to the internet. I was on CM 12 and will try one of Amaces new builds, just not sure which one.

chris8428 said:
I am also upgrading for the issues you mentioned. Netflix and YouTube became slow and as some people have reported would not play videos due to thinking they were not connected to the internet. I was on CM 12 and will try one of Amaces new builds, just not sure which one.
Click to expand...
Click to collapse
I personally use his last MM build (because xposed), with the official relax of twrp 3.0.2.0 with great results. I use Pico GApps, and have no issues with it. I have used the N builds, they all worked well for me, but I just like xposed to much to keep using anything newer than that last MM build.

OK, so me too. My husband is finally tired of his HD crying about no space to re-install B&N crapware apps (Hulu+, Twitter, etc.) and is ready for something beyond rooted stock. His main prerequisite beyond stability is a smoothly functioning HDMI port which he uses a lot.
I just recently flashed AOSP 7.0 on my Nook Tablet and like it, but I have no idea where to go with the HD. So many choices. It doesn't seem sensible to go back to something like CM 11 at this point. And....how can you tell one coded file name from another in @amaces folders?

nmyshkin said:
...
And....how can you tell one coded file name from another in @amaces folders?
Click to expand...
Click to collapse
I believe the file names of Andrei Măceș' ROM builds (for both of his AOSP and CM/LM ROMs) are derived from the names of the corresponding Android OS releases+builds that they are based on. See https://source.android.com/source/build-numbers.html for the naming convention for the Android OS releases/builds.
---------- Post added at 04:23 PM ---------- Previous post was at 04:08 PM ----------
nmyshkin said:
...
His main prerequisite beyond stability is a smoothly functioning HDMI port which he uses a lot.
...
Click to expand...
Click to collapse
Beware that there seems to be an issue with HDMI support on late CM13 and LN14 releases -- see https://forum.xda-developers.com/showpost.php?p=71075161&postcount=1649.
Also, it might be worth checking out if screen-casting is an acceptable alternative to HDMI.

digixmax said:
I believe the file names of Andrei Măceș' ROM builds (for both of his AOSP and CM/LM ROMs) are derived from the names of the corresponding Android OS releases+builds that they are based on. See https://source.android.com/source/build-numbers.html for the naming convention for the Android OS releases/builds.
---------- Post added at 04:23 PM ---------- Previous post was at 04:08 PM ----------
Beware that there seems to be an issue with HDMI support on late CM13 and LN14 releases -- see https://forum.xda-developers.com/showpost.php?p=71075161&postcount=1649.
Also, it might be worth checking out if screen-casting is an acceptable alternative to HDMI.
Click to expand...
Click to collapse
OK, thanks. So for now I'll check out the CM 12 thread and maybe early CM 13. A pity about the HDMI, but understandable considering it's such a specific feature.

Going retro!
We decided to go for CM 11 on the Nook HD--at least for now. Reading about the various issues with ROMs beyond KitKat is sort of disheartening, and with CM 11 I knew we'd still have the HDMI out working (yes it does!). Since it's also my husband's first "real" android experience (not counting the stock B&N system), something safe and stable seemed like a good first step. The installation went without a hitch, but I wish I had wiped system along with everything else as there was a bunch of B&N junk folders and prior app data still present in 0. Anyway, not too much to clean up.
Meanwhile we can investigate various screen casting options for both his HD and my Nook Tablet.
Our thanks to @dofuuz who posted CM 11 builds here.

>Reading about the various issues with ROMs beyond KitKat is sort of disheartening
Not sure why you're disappointed, as the Nook (HD and HD+) has far outlived most of its peers. It's like criticizing a dog that can't sing well, when we should celebrate the wonder that it can sing at all.
I'd never thought that I'd still be here in these forums. But the Nook is still very much usable, with the latest Nougat ROMs. It's slower, yes, but everything still runs as it should. The few bugs are known and are manageable.
I've dabbled in all the versions. The fastest version for me was 10.1/10.2. After that, they all go downhill in terms of speed, and unfortunately also bugs. The latest version doesn't help much in the speed department, but it's also the most stable. Most importantly, it's the only one that still has active development. Most current apps work, as well as casual games.
Shout-outs to @leapinlar and @PeteInSequim, if they're still around. Thanks to @digixmax and others for taking up the mantle of the shepherd for the few remaining stragglers here. Lastly, thanks to @amaces for still hanging around this place.

No, don't get me wrong. I think the custom ROMs are phenomenal. I run @amaces AOSP 7.0 on my Nook Tablet (talk about ancient). But everyone has a different tolerance for glitches, and in this case a functioning HDMI port was a priority. The HD runs like well-tuned machine now and we don't need a more up-to-date OS for anything we do right now. So it's lucky a copy of the CM 11 ROM was still available.
The day may come for an update, but for now we're happy.