Best Nook HD+ Daily Driver in 2017? - Nook HD, HD+ Q&A, Help & Troubleshooting

If anyone is reading this in 2017
I ran CM11 for quite a while, and performance ground to a halt. Maybe there's not a ROM out there that doesn't need to be reflashed every once in a while, but I'm curious what folks have found viable as a daily driver. I'm looking at new tablets, but wouldn't mind getting the old HD+ in give-to-a-niece-or-nephew condition if nothing else.
I semi-accidentally flashed Nougat from Amaces' thread, and it's a big improvement over my bogged-down CM11 build, but has some display and battery glitches. I'm grabbing his/her most recent Marshmallow build to try now.
Any thoughts on what's the most stable and best performance? Does anyone else find their system slowing way down over time, without a fresh install?

I had had the same good experience with CM11 until mid last year when many commonly used apps started to become unresponsive and oftentime crashed (force-closed). So over the holidays break I took the plunge and upgraded to Amaces' experimental build lnos_ovation-ota-NMF26Q.170104, so far the performance is as good as it used to be with CM11.

Taosaur said:
If anyone is reading this in 2017
I ran CM11 for quite a while, and performance ground to a halt. Maybe there's not a ROM out there that doesn't need to be reflashed every once in a while, but I'm curious what folks have found viable as a daily driver. I'm looking at new tablets, but wouldn't mind getting the old HD+ in give-to-a-niece-or-nephew condition if nothing else.
I semi-accidentally flashed Nougat from Amaces' thread, and it's a big improvement over my bogged-down CM11 build, but has some display and battery glitches. I'm grabbing his/her most recent Marshmallow build to try now.
Any thoughts on what's the most stable and best performance? Does anyone else find their system slowing way down over time, without a fresh install?
Click to expand...
Click to collapse
Hi, I'm in the same boat as you my friend.
Decided to dig up my old nook HD+ I hadn't use for about a 2 years and found it had carbonrom (jellybean 4.2.2) on it. I remember really getting frustrated at the frequent reboots but it was still better than the extremely laggy CM builds that were available at the time.
Need something extremely stable as I plan to hand this off to my dad who quite non-tech-savvy but enjoys a few time killer games.
How is the performance on Marshmallow? I'm kinda still hesitant to upgrade too far to the latest android from the fear of poor performance due to higher hardware requirements for newer generations of android

I am also upgrading for the issues you mentioned. Netflix and YouTube became slow and as some people have reported would not play videos due to thinking they were not connected to the internet. I was on CM 12 and will try one of Amaces new builds, just not sure which one.

chris8428 said:
I am also upgrading for the issues you mentioned. Netflix and YouTube became slow and as some people have reported would not play videos due to thinking they were not connected to the internet. I was on CM 12 and will try one of Amaces new builds, just not sure which one.
Click to expand...
Click to collapse
I personally use his last MM build (because xposed), with the official relax of twrp 3.0.2.0 with great results. I use Pico GApps, and have no issues with it. I have used the N builds, they all worked well for me, but I just like xposed to much to keep using anything newer than that last MM build.

OK, so me too. My husband is finally tired of his HD crying about no space to re-install B&N crapware apps (Hulu+, Twitter, etc.) and is ready for something beyond rooted stock. His main prerequisite beyond stability is a smoothly functioning HDMI port which he uses a lot.
I just recently flashed AOSP 7.0 on my Nook Tablet and like it, but I have no idea where to go with the HD. So many choices. It doesn't seem sensible to go back to something like CM 11 at this point. And....how can you tell one coded file name from another in @amaces folders?

nmyshkin said:
...
And....how can you tell one coded file name from another in @amaces folders?
Click to expand...
Click to collapse
I believe the file names of Andrei Măceș' ROM builds (for both of his AOSP and CM/LM ROMs) are derived from the names of the corresponding Android OS releases+builds that they are based on. See https://source.android.com/source/build-numbers.html for the naming convention for the Android OS releases/builds.
---------- Post added at 04:23 PM ---------- Previous post was at 04:08 PM ----------
nmyshkin said:
...
His main prerequisite beyond stability is a smoothly functioning HDMI port which he uses a lot.
...
Click to expand...
Click to collapse
Beware that there seems to be an issue with HDMI support on late CM13 and LN14 releases -- see https://forum.xda-developers.com/showpost.php?p=71075161&postcount=1649.
Also, it might be worth checking out if screen-casting is an acceptable alternative to HDMI.

digixmax said:
I believe the file names of Andrei Măceș' ROM builds (for both of his AOSP and CM/LM ROMs) are derived from the names of the corresponding Android OS releases+builds that they are based on. See https://source.android.com/source/build-numbers.html for the naming convention for the Android OS releases/builds.
---------- Post added at 04:23 PM ---------- Previous post was at 04:08 PM ----------
Beware that there seems to be an issue with HDMI support on late CM13 and LN14 releases -- see https://forum.xda-developers.com/showpost.php?p=71075161&postcount=1649.
Also, it might be worth checking out if screen-casting is an acceptable alternative to HDMI.
Click to expand...
Click to collapse
OK, thanks. So for now I'll check out the CM 12 thread and maybe early CM 13. A pity about the HDMI, but understandable considering it's such a specific feature.

Going retro!
We decided to go for CM 11 on the Nook HD--at least for now. Reading about the various issues with ROMs beyond KitKat is sort of disheartening, and with CM 11 I knew we'd still have the HDMI out working (yes it does!). Since it's also my husband's first "real" android experience (not counting the stock B&N system), something safe and stable seemed like a good first step. The installation went without a hitch, but I wish I had wiped system along with everything else as there was a bunch of B&N junk folders and prior app data still present in 0. Anyway, not too much to clean up.
Meanwhile we can investigate various screen casting options for both his HD and my Nook Tablet.
Our thanks to @dofuuz who posted CM 11 builds here.

>Reading about the various issues with ROMs beyond KitKat is sort of disheartening
Not sure why you're disappointed, as the Nook (HD and HD+) has far outlived most of its peers. It's like criticizing a dog that can't sing well, when we should celebrate the wonder that it can sing at all.
I'd never thought that I'd still be here in these forums. But the Nook is still very much usable, with the latest Nougat ROMs. It's slower, yes, but everything still runs as it should. The few bugs are known and are manageable.
I've dabbled in all the versions. The fastest version for me was 10.1/10.2. After that, they all go downhill in terms of speed, and unfortunately also bugs. The latest version doesn't help much in the speed department, but it's also the most stable. Most importantly, it's the only one that still has active development. Most current apps work, as well as casual games.
Shout-outs to @leapinlar and @PeteInSequim, if they're still around. Thanks to @digixmax and others for taking up the mantle of the shepherd for the few remaining stragglers here. Lastly, thanks to @amaces for still hanging around this place.

No, don't get me wrong. I think the custom ROMs are phenomenal. I run @amaces AOSP 7.0 on my Nook Tablet (talk about ancient). But everyone has a different tolerance for glitches, and in this case a functioning HDMI port was a priority. The HD runs like well-tuned machine now and we don't need a more up-to-date OS for anything we do right now. So it's lucky a copy of the CM 11 ROM was still available.
The day may come for an update, but for now we're happy.

Related

[Q] Nook HD+ best rom for me, help!

I'm new to this but I understand the root & flash process.
I just need some help selecting & locating a rom for my nook hd.
I don't like the Barnes & noble os as it seems a little laggy.
Therefore I'd like to replace if with a proper android rom but I get confused with what the difference between stock & cm10 is.
I just want a stable android rom that's fast for browsing & will play netflix well.
Any help is appreciated.
Thanks
Stock ROM is the default Barnes & Noble operating system, the one you're using now. The term "stock" is used to describe this ROM, as it's the default ROM that comes installed with the Nook.
There are other ROMs available, so that you can customise your Nook. The one I would recommend, so that you can comfortably just use Android on a daily basis without worrying about anything else is CyanogenMod 10.1.3 (stable). This is a stable ROM, and ready for daily use without worrying about anything else. That's CyanogenMod (CM) 10.1.3. Do NOT install CyanogenMod 10.2, as this is a nightly version and not ready for daily use. You can install CM10.2 if you desire, but don't expect it to be perfect; there may be few issues and problems here and there.
Installing CyanogenMod 10.1.3 runs Android version 4.2.2, so that's Jelly Bean. CM10.2 runs Android 4.3 (however, this isn't stable yet). Here's a beginners guide to installing CyanogenMod for your Nook: http://forum.xda-developers.com/showthread.php?t=2317500
All the best, if you require any assistance, feel free to reply back.
For what it's worth, performance on my Nook HD+ with CyanogenMod 10.1.3 is absolute garbage. 10x worse than stock B&N ROM, everything lags to hell and back. Even scrolling the damn app menu lags, and I'm constantly seeing "<Insert App Name Here> isn't responding. Do you want to close it?" Everything, even the system idle process. I don't know what to advise as there seems to be no general consensus as to what's the best ROM, everything's under development, the only ROM listed under Original Android Development (which I'm hoping is as close as possible to stock) doesn't work.
rpop said:
For what it's worth, performance on my Nook HD+ with CyanogenMod 10.1.3 is absolute garbage. 10x worse than stock B&N ROM, everything lags to hell and back. Even scrolling the damn app menu lags, and I'm constantly seeing "<Insert App Name Here> isn't responding. Do you want to close it?" Everything, even the system idle process. I don't know what to advise as there seems to be no general consensus as to what's the best ROM, everything's under development, the only ROM listed under Original Android Development (which I'm hoping is as close as possible to stock) doesn't work.
Click to expand...
Click to collapse
My experience wasn't like that at all. While I wouldn't say it was blistering, it did seem on par or better than the Stock ROM. swiping was just a smidge laggy using Nova Prime.
I went on to Carbon and while it has a very nice feature set, it seems a good bit LAGGIER than the previous ROMs. I've been told that SlimBean runs nicely though, so I'm going to play with Carbon a little more but likely go on to that one when I decide to flash again.
I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.
rpop said:
I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.
Click to expand...
Click to collapse
Hi, I have been running 10.2 nightly for awhile now and have my tablet running several hours a day surfing Web, watching movies, reading, etc. and I have not had any of the lag or slowdown that you mention. I have had no random reboots or any trouble, I think it performs better than stock rom.
I am very happy with this setup.
So I hope this helps you some.
Sent from my BN Nook HD using Tapatalk 4
rpop said:
I should expand a bit on my experience.
Performance was great the first half day, very speedy, better than stock ROM. By the end of the day it got a little slower than stock, a day or two later it was already pretty bad, noticeably slower, a week later absolutely terrible. It's as if performance degrades with time. I've tried reflashing it and now it sucks from the very beginning. If you find yourself trying CyanogenMod 10.1.3 stable and it still works great a week later, let me know--maybe I need to send mine in for a warranty swap.
Click to expand...
Click to collapse
It is not CM10.1.3, it is your device being hit with the need for trim. Your stock would act the same way. Read in the CM10.2 thread.
Sent from my BN NookHD+ using xda premium
Oh my god, you're right! I have to admit I noticed the TRIM issue when I first installed CyanogenMod (hard to miss, it's at the top in big red letters ). I realized it's a perfect match for the performance degradation I'd been seeing, but I dismissed it as a possible cause out of a naive belief that there's no way a manufacturer could ship something that crippled. I thought surely it would have been caught during testing. I also didn't want to read a 100+ page thread to figure out exactly what the issue is when the search was broken. I've taken a few hours and caught up on the thread now... I guess if it looks like cheese, and smells like cheese... it's gotta be cheese.
I've got MAG2GA & 0x000015 memory chips, looks like my only option is to brick it and do a warranty swap I'm curious as to how the other people above reported good experiences; are you guys purposely installing builds with TRIM enabled because you know have good memory chips? Seems to me almost every ROM around here has it purposely disabled. Either that or you've barely used the internal flash memory.
I guess the first recommendation for Kido44 would be to figure out what kind of memory you have, so you know if you can install a kernel with TRIM enabled. The degradation in performance without it is so bad, I want to fling it at the wall. I guess it might not be noticeable right away for you if all you're planning on doing is some light web browsing and Netflix viewing, but you'll run into it at some point and weep. I suspect you're already getting there if the stock ROM is starting to lag a little bit.
As always, thanks to leapinlar for pointing me in the right direction
I've been happy with CM 10.1 for a while, ran really stable without any major hiccups, but the lag got so bad due to the lack of trim that I decided to take the plunge and risk installing 10.2 Milestone 1 with a trim-enabled kernel. I also have a bad emmc chip but I'm willing to risk it.
It's not what I'd recommend for everyone, but that's my experience.
episode96 said:
I've been happy with CM 10.1 for a while, ran really stable without any major hiccups, but the lag got so bad due to the lack of trim that I decided to take the plunge and risk installing 10.2 Milestone 1 with a trim-enabled kernel. I also have a bad emmc chip but I'm willing to risk it.
It's not what I'd recommend for everyone, but that's my experience.
Click to expand...
Click to collapse
Carbon B11 + cm10.1.3 kernel has been working well on my HD+ for a while. It's almost as fast as the trimmed cm10.2 but without the fault risk.
jamus28 said:
Carbon B11 + cm10.1.3 kernel has been working well on my HD+ for a while. It's almost as fast as the trimmed cm10.2 but without the fault risk.
Click to expand...
Click to collapse
Not sure I understand. Won't it get slow eventually because of the lack of trim?
Sure, but it was still usable after several weeks.
I like Slimrom for the most part and observedly better than CM 10.1.3 on my nook hd+. Seems faster and more responsive, and if you use Puffin browser, it seems like it's 2x faster compared to stock browser (that's just my imo, ymmv). Anyway, I've tested only 3 roms so far, slim, cm, and carbon, so my question is, are there any roms that you guys recommended on the hd+ that can maybe compare with slim? Slim doesn't seem to be officially supported.

[Q] Nub seeking advise (cm10 or cm11)

Hey everyone, awesome site! Yep, first post. :cyclops:
I'm completely new to Android though I have hacked a few things and understand the importance of making absolutely sure you know the procedures and make backups in case things get fubar. I've been digging through the posts quite a bit and of course see that opinions on use, stability, etc seem to vary a bit. What I'd like some kind feedback on is (as a nub) am I better off starting out using CM10 and then when I'm ready I can move on to CM11 or has CM11 been developed well enough to just start there. Also wondering how stable is "stable" on both. I'm much more interested in having a good and stable experience than a few extra bells and whistles until the kinks are worked out. I'm running a stock Nook HD+ now so it's all an upgrade in any case. Thanks in advance for all constructive feedback.
I went straight from rooted stock on my HD to CM 11 so I don't know how CM 10 ROMs are. But the CM 11 builds I've used from verygreen's thread since early January have been rock solid on my HD. Just 1 spontaneous reboot in the entire 2 months -- when granting superuser access to an app. That's it. Wi-fi, bluetooth, web browsing, music and video playback are all working fine. Swiping between screens is smooth. I did a clean install before I put CM 11 on, and I think that makes a difference vs. those who did dirty installs.
If you have an HD, CM 11 will let you use full screen mode which is very valuable for a 7" screen. I don't think you will get that with a CM 10 build which is based on JB. If you have an HD+, the gain in screen space that Kit Kat gives you is not as critical.
If you go to CM 10 first, you might have to reinstall everything for a clean install before jumping to CM 11. So you would ultimately save a lot of time by going straight to CM 11.
roms
hey Jodo901 :good:
my experience was that i purchased a HD+ and did loads of reading both prior to and after purchase. I chose the nook for a number of reasons (price vs performance) but also the awesome input from the guys here on XDA around custom roms.
For years I've always looked to get my devices updated with custom roms but always like to have a proper noob guide lol. The best place to start for me on the HD+ is this thread - http://forum.xda-developers.com/showthread.php?t=2317500
It explains the process step by step and is idiot proof (i did it!!) I have read numerous threads about which rom to put on the HD+ but settled on the stable 10.1.3 rom. i considered the 10.2 rom but the 10.2 had mixed reviews on the HD+ and the consensus was that 10.1.3 was a stable, mature and smooth rom. I am watching the CM 11 releases closely but it remains a work in progress, although from posters on the thread it seems that it is running almost perfectly. I will switch to CM 11 once verygreen posts a "stable" release - plus you can flash the roms as you wish, so can start with the stable 10.1.3 and then reflash when you're more confident or feel that the CM11 rom is more mature.
My advice would be go for 10.1.3 and follow the guide above. I didn't think the stock rom was that bad, but the 10.1.3 is night and day imho, its smooth, repsonsive and allows lots of funky tweaks. I've had this rom on my HD+ for a few days and am very pleased :fingers-crossed:
all the best with your choice fella
fish
Thanks for the quick responses guys! You've given me a bit more to consider and look into. That was one of the threads I bookmarked yesterday so thanks for pointing out it's validity. A further question that now comes to mind from what you both have said is how much of a hardware difference is there and is that something that can make a performance difference? Guess I'm still gonna be info diving for a bit tonight after work.
KitKat does improve on performance over Jelly Bean, but it's not something that will affect your daily use. I'm currently using CM 10.1.3 (stable) on a Nook HD+ and HD. I'm considering upgrading the HD to CM 10.2.1, as there is a stable build out. I will definitely upgrade to KitKat/CM11 when a stable build is released.
Personally, I only install stable builds. I don't want the hassle of encountering issues with nightlies. I find that CM10.1.3 is extremely stable, and I have not had any problems with it; although battery life is reduced from the original stock ROM, but that's nothing to be worried about. In conclusion, no issues with the CM10.1.3 stable build.
As a note, I also believe the TRIM issue has been fixed with the CM10.2.1 stable too on the Nook HD+; so CM10.2.1 should be fine too, but I haven't tried it yet.
All the best.
roms
Jodo901 said:
Thanks for the quick responses guys! You've given me a bit more to consider and look into. That was one of the threads I bookmarked yesterday so thanks for pointing out it's validity. A further question that now comes to mind from what you both have said is how much of a hardware difference is there and is that something that can make a performance difference? Guess I'm still gonna be info diving for a bit tonight after work.
Click to expand...
Click to collapse
hey jodo
i'm not sure what you mean by hardware difference? if you mean the effectiveness of each rom on the HD+ i suppose its a matter of preference and through trial and error in trying the roms available. It seems that CM11 is considered the faster of the roms available but as said previously this is an on-going rom development and not considered stable.
I considered what i was going to use my HD+ for, which in my case was surfing and reading books/comics and getting the best return on the stupidly low price vs decent spec and awesome screen. I didn't buy it to game as 1. its hardly a powerhouse for gaming and 2. i dislike mobile gaming and prefer PS and XBOX for that sorta thing. My priorities were smoothness, stability, customisation and battery life which i feel 10.1.3 provides, but others may disagree lol.
Fish
Thanks again for the input guys. :good:
I finally have a some time to dig in on the forums a little and maybe get to the rooting later. I'm running very light on the apps at this point. Just some online stuff, ebooks, comics, etc. Mostly looking for more control and customization.
@fishman09 - I thought perhaps there were hardware differences depending on the manufacture date of the Nook HD+ unit but I haven't seen anything like that so I assume it's a non issue. I know this can be something that makes a difference when hacking older game systems (Xbox, PSP, etc)
**********EDIT**********
Thanks again to everyone who gave me their 2 cents on my way into all this fun custom Android stuff on my Nook HD+!!
I have now successfully installed 10.2.1 and so far its working well and looks great.
Another data point: I was in same position as you. Decided to go for a cm11 nightly build (this was back in _Jan). It ran reasonably well, but I wondered if 10.2 would be more stable or better with battery life. It felt about the same, with couple missing things, notably no hiding of soft buttons. So I've now gone back to cm11, a march nightly build. I think it is as good as a $120 tablet is going to get . So I'm pretty happy and staying. I even enabled ART runtime and so far everything has run except asphalt 8.
Just make sure you format and wipe everything after doing a backup during your install process.
My Conclusion...or the time being.
Well after about 3 or 4 days of normal usage with CM 10.2.1 I have decided to go back to the stock version of the Nook.The difference in battery drain did not outweigh the bonuses of the upgraded OS for me at all. I would say the battery life was only about 2/3 as long. This is a big drawback in my opinion considering I really wasn't running anything differently. Yeah, it was a bit prettier and more customizable and I was very impressed with the stability, but it's kind of pointless to have a wireless device that you have to keep plugging in all the time.
Jodo901 said:
Well after about 3 or 4 days of normal usage with CM 10.2.1 I have decided to go back to the stock version of the Nook.The difference in battery drain did not outweigh the bonuses of the upgraded OS for me at all. I would say the battery life was only about 2/3 as long. This is a big drawback in my opinion considering I really wasn't running anything differently. Yeah, it was a bit prettier and more customizable and I was very impressed with the stability, but it's kind of pointless to have a wireless device that you have to keep plugging in all the time.
Click to expand...
Click to collapse
I got my new Nook+ last week and pondered whether to root and which ROM to use. After one week of use, I have no real issues keeping it stock for now but will follow the kitkat development for possible future rooting.

[Q]-Best OS to be running currently on the HP TP ?

I have a wifi only HP TP that is running Schizoid. It's been that way for some time now and I really haven't kept up with the HP roms in about a year or so. I gave up being cutting edge on my TP because it often has issues when working in recovery where it can take 1-5 times of installing a rom for it to take. Sometimes I even have issues doing backups and recoveries .
What does the community feel is the best, most stable OS to be running now? If I'm not looking for a huge hassles, should I stay on schiz? Is it worth it to come up to lollipop or kitkat? I'd like to retain camera capabilities but I am not concerning with the former web os that was on there (which is still present on the tab). Yes, I admit I have not done my research yet mostly because I'd like to hear other people's opinions before I begin a laser focus on an android version.
Hmm, by Shizoid do you mean back in the pre-TP Toolbox days? I think the process of installing android has gotten a lot better and reliable. I'm currently using milaq's Lollipop build, which works pretty well, although some things still don't work like camera. I would personally think that the KitKat builds are pretty stable now, so that would be a pretty good place to try.
nARMstrong20 said:
Hmm, by Shizoid do you mean back in the pre-TP Toolbox days? I think the process of installing android has gotten a lot better and reliable. I'm currently using milaq's Lollipop build, which works pretty well, although some things still don't work like camera. I would personally think that the KitKat builds are pretty stable now, so that would be a pretty good place to try.
Click to expand...
Click to collapse
Yes. It was pre-toolbox. I'd largely not touched the TP (in terms of upgrades) for roughly a year or so. I use it as it sits next to my laptop charging on the cornerstone dock day after day. Due to the headaches I always had trying to upgrade, save restores, restore from back ups if something goes wrong....I just stopped keeping it up to date.
Well in terms of stability i have read a lot of people recommending jcsullins's builds. I used his 1125 build on KitKat for months without major problems, and stuff like camera and bluetooth worked fairly well. Its a different installation process with the data media builds and such, so most Android builds past 4.4 will require a clean install, but with TP Toolbox, all that really needs to be done now is load the script, copy the build, gapps and recovery in the tablet and let the toolbox do its work.
nARMstrong20 said:
Well in terms of stability i have read a lot of people recommending jcsullins's builds. I used his 1125 build on KitKat for months without major problems, and stuff like camera and bluetooth worked fairly well. Its a different installation process with the data media builds and such, so most Android builds past 4.4 will require a clean install, but with TP Toolbox, all that really needs to be done now is load the script, copy the build, gapps and recovery in the tablet and let the toolbox do its work.
Click to expand...
Click to collapse
Thanks narm, I'll look into it. I'm thinking I'm going to do a full blow away because I never use the WebOS partition anymore.

Best install for HD+ 4.3 too many versions for dummy

trying to install 4.3 or higher so new health watch will work. There is so many versions I am confused (which is easy to do) what IS CM 10.2 ? is this the version I need or do I need to use something else and what is the best version of Roms to use. I hope this is not too confusing if so it is because I am confused. Would some one please help me out.
cutting to the chase:
I need 4.3 or higher on my nook HD+.
Thanks
Retired
New age electronics a little fuzzy for me. The install for dummies has the cm11 file site closed.
Is there a newbie install guide for the most stable rom install ? Sorry if my terminology is incorrect. I would like to use a site that has all of the parts needed listed and can be down loaded. I need at least 4.3 or higher. As you can tell I am very new at this and would appreciate any help.
From reading yesterday it looks like cm 10.1.3 is the most stable or is there anew one on the scene.
Careful one
carefulone said:
New age electronics a little fuzzy for me. The install for dummies has the cm11 file site closed.
Is there a newbie install guide for the most stable rom install ? Sorry if my terminology is incorrect. I would like to use a site that has all of the parts needed listed and can be down loaded. I need at least 4.3 or higher. As you can tell I am very new at this and would appreciate any help.
From reading yesterday it looks like cm 10.1.3 is the most stable or is there anew one on the scene.
Careful one
Click to expand...
Click to collapse
I still think cm10.1.3 is best.
What do you mean the install for dummies has cm11 file site closed? Do you mean my install for dummies thread? The links there still work.
Sent from my SM-T707V using XDA Premium HD app
I see that you still prefer 10.1.3, leapinlar, just curious as to why. I mean I ask because I know 4.4 brings things that should be useful especially TRIM for our older NHD hardware which it should certainly benefit from. I just got an 8GB NHD (I have a 32GB microSD for expansion as well) from a pawn shop several hours ago for $10 (had 2.1 on it, then upgraded to 2.2.1 and it seems to work fine overall) and it's got no issues. My Wife and I communicate using YIM (Yahoo Instant Messenger) and that won't work on the NHD (it's a Yahoo issue, not the NHD) so we're migrating over to using Hangouts which is fine as well.
But now that we have two NHDs I can goof off with mine. She's had one for a few years that I get to play with on occasion, I put CM11 on it a long time ago and it's been fine but tonight I made a backup of mine after a complete de-registration (from the previous owner) so it was clean as a whistle, then I simply restored that backup to hers so now we have to "almost" factory-fresh 2.2.1 NHDs to work with.
I remember when we first got the NHD back in late 2013 the stock software was crap and laggy which is why I pushed CM on it as soon as I could (CM10, then later on CM11). Obviously I want to eek out the best performance I can from this device even in spite of the age so, again, I'm curious to why you prefer 10.1.3 - I'm at a point right now where I'd like to install a custom ROM since I can do more experimentation with my NHD that I just got for $10 than the Wife's, so I'm just "on the market" one could say to see what the options are.
I can't tolerate Lollipop so I won't be going anywhere near Android 5.x or CM12 for any reason; I prefer Android 4.4.x at this point but even after all this time CM still doesn't have a stable CM11 build and at this point I doubt it'll ever happen so, since 10.1.3 appears as a stable option I'm considering it.
I'm guessing you run your 10.1.3 from the eMMC and not SD card, but I don't think I've ever seen you say which way you do things. And just to ask: any issues on your NHD with 10.1.3 that you'd care to mention, anything at all? Everything runs smooth and great, etc? Do you use a custom kernel with any tweaks/governors/etc? If you can answer here, awesome, if not that's fine, perhaps the info is someplace buried in another thread which I need to look for.
You've got vastly more experience with the NHD than I do and your guides and your assistance with these devices (and the Nook Color and Tablet as well) are invaluable resources here so thanks for your continuing efforts.
I'm just looking to get the best performance/battery life/etc from this Nook HD, like most anyone I suppose, so any suggestions are very welcome, indeed.
br0adband said:
I see that you still prefer 10.1.3, leapinlar, just curious as to why. I mean I ask because I know 4.4 brings things that should be useful especially TRIM for our older NHD hardware which it should certainly benefit from. I just got an 8GB NHD (I have a 32GB microSD for expansion as well) from a pawn shop several hours ago for $10 (had 2.1 on it, then upgraded to 2.2.1 and it seems to work fine overall) and it's got no issues. My Wife and I communicate using YIM (Yahoo Instant Messenger) and that won't work on the NHD (it's a Yahoo issue, not the NHD) so we're migrating over to using Hangouts which is fine as well.
But now that we have two NHDs I can goof off with mine. She's had one for a few years that I get to play with on occasion, I put CM11 on it a long time ago and it's been fine but tonight I made a backup of mine after a complete de-registration (from the previous owner) so it was clean as a whistle, then I simply restored that backup to hers so now we have to "almost" factory-fresh 2.2.1 NHDs to work with.
I remember when we first got the NHD back in late 2013 the stock software was crap and laggy which is why I pushed CM on it as soon as I could (CM10, then later on CM11). Obviously I want to eek out the best performance I can from this device even in spite of the age so, again, I'm curious to why you prefer 10.1.3 - I'm at a point right now where I'd like to install a custom ROM since I can do more experimentation with my NHD that I just got for $10 than the Wife's, so I'm just "on the market" one could say to see what the options are.
I can't tolerate Lollipop so I won't be going anywhere near Android 5.x or CM12 for any reason; I prefer Android 4.4.x at this point but even after all this time CM still doesn't have a stable CM11 build and at this point I doubt it'll ever happen so, since 10.1.3 appears as a stable option I'm considering it.
I'm guessing you run your 10.1.3 from the eMMC and not SD card, but I don't think I've ever seen you say which way you do things. And just to ask: any issues on your NHD with 10.1.3 that you'd care to mention, anything at all? Everything runs smooth and great, etc? Do you use a custom kernel with any tweaks/governors/etc? If you can answer here, awesome, if not that's fine, perhaps the info is someplace buried in another thread which I need to look for.
You've got vastly more experience with the NHD than I do and your guides and your assistance with these devices (and the Nook Color and Tablet as well) are invaluable resources here so thanks for your continuing efforts.
I'm just looking to get the best performance/battery life/etc from this Nook HD, like most anyone I suppose, so any suggestions are very welcome, indeed.
Click to expand...
Click to collapse
I prefer 10.1.3 because I have never had one issue with it. I tried 10.2 while it was still in nightlies and had issues so moved back. Now that 10.2.1 is stable it may be ok. I tried Jon Lee's 10.2 with the tweaked kernel and found it unstable.
And I do run from emmc, but have run from SD with no issues using a good SD.
I recommend against 11 for the HD+ for the very reason you tout it, TRIM. I have seen a lot of HD+ get bricked by TRIM even though the kernel is supposed to be fixed to prevent that. It is just certain models of HD+, others seem safe. I have not heard of any HD's getting bricked though.
Sent from my SM-T707V using XDA Premium HD app
Just tried CM11 (the 8-13 Nightly) and was somewhat disappointed in some aspects; I have a bunch of content on the Google Play Movies & TV side of things and that app won't play any videos at all on CM11, not sure what the issue is and I'm not interested in bothering with it so I'm rolling back to pure stock 2.2.1 for the time being.
I most likely will give 10.1.3 a shot, it can't hurt I suppose and I figure it'll be pretty snappy all around.
Any idea if there are any custom kernels that might function on that (meaning 10.1.3) to allow for more options for tweaking things (governors and I/O, etc)? I'll do more research but for now as stated I'll stick with pure stock since it seems to work ok.
Thanks for the response...
br0adband said:
Just tried CM11 (the 8-13 Nightly) and was somewhat disappointed in some aspects; I have a bunch of content on the Google Play Movies & TV side of things and that app won't play any videos at all on CM11, not sure what the issue is and I'm not interested in bothering with it so I'm rolling back to pure stock 2.2.1 for the time being.
I most likely will give 10.1.3 a shot, it can't hurt I suppose and I figure it'll be pretty snappy all around.
Any idea if there are any custom kernels that might function on that (meaning 10.1.3) to allow for more options for tweaking things (governors and I/O, etc)? I'll do more research but for now as stated I'll stick with pure stock since it seems to work ok.
Thanks for the response...
Click to expand...
Click to collapse
Yes, I think the yellow kernel by Jon Lee has a 10.1.3 version. But I found it unstable.
Sent from my SM-T707V using XDA Premium HD app
I also need to know which ROM is best for 4.3+. I have an android wear watch I need to pair. Should I use cm 10.2 or 11? Which ROM of the better cm should I use? Much obliged for your help and assistance.
bump

Best Stable ROM for this Tablet?

So I have been using my Amazon Fire Tablet exclusively lately, and have enjoyed it every bit! I currently am running SlimLP version Slim-5.1.1.beta.0.14-UNOFFICIAL-20160107-1121.
I just recently purchased the same tablet for family, and wanted to go ahead and flash some type of Android to the new tablets, but was curious if there is now a better and stable ROM out there for this device, especially ones that are running Marshmallow. I am looking for something where everything works, is fast, and gives great battery life. Open to any advice on this one!
Thanks!
darkgiant said:
So I have been using my Amazon Fire Tablet exclusively lately, and have enjoyed it every bit! I currently am running SlimLP version Slim-5.1.1.beta.0.14-UNOFFICIAL-20160107-1121.
I just recently purchased the same tablet for family, and wanted to go ahead and flash some type of Android to the new tablets, but was curious if there is now a better and stable ROM out there for this device, especially ones that are running Marshmallow. I am looking for something where everything works, is fast, and gives great battery life. Open to any advice on this one!
Thanks!
Click to expand...
Click to collapse
- only Lollipop based roms until bootloader is cracked (unlikely)
- all are stable; most simply present different skins
- meaningful performance differences (battery life) are minimal
- read thread OPs for rom characteristics you find appealing
I'm using 'clean' AOSP with xposed to add only the modification i want.
I think this is the best way, but not the noob proof one
So I ended up installing CyanogenMod 12.1, it was super easy to install, everything seems to work so far. I guess I'll find out if my family member mentions anything about the tablet not working if there is an issue. I might take a crack at CM12.1 myself over SlimLP, but will do more research to see what the real differences may be.
I like the Ressurection Remix OS myself, has a different task manager and some other tweaks
darkgiant said:
So I ended up installing CyanogenMod 12.1, it was super easy to install, everything seems to work so far. I guess I'll find out if my family member mentions anything about the tablet not working if there is an issue. I might take a crack at CM12.1 myself over SlimLP, but will do more research to see what the real differences may be.
Click to expand...
Click to collapse
Of the major offerings (discounting FireOS) Nexus is perhaps the most unique as virtually nothing is baked in. Pure AOSP that you customize to your liking. Xposed friendly; most UI centric modules work as the author intended. I personally favor CM on this device (has everything I want) while using Nexus elsewhere. Have fun!

Categories

Resources