Was originally running OMJ Sprint Rom and wanted to try out CM so did a wipe and flashed the CM rom. Everything was working except for the 3G mobile data. Somehow 4G LTE was still connected and running but that doesn't allow me to make voice calls or even text as I found out. Anyhow had to switch back to slow iPhone and now am stuck with this awesome device that can't make phone calls.
I used to successfully flash roms all the time with my EVO 4G but for some reason this has stumped me. Any help is appreciated. Currently running the Bad Boyz rom and cannot boot into a recovery (either CW or TWRP). HELP.
Cheers
As far as data goes did you try to reprovision the phone ##72786# yet? What happens when you switch to cdma in network settings?
Yea I tried that both over the phone with a Sprint rep and then also at the store and no luck. Also tried switching between Auto/LTE + CDMA/ CDMA only and no luck. Also not sure how to tell if it's working since it's not activated...should it still indicate a 3G connection without activation?
Related
I had CM 6.0 installed and everything was working great until a couple days ago. My phone would periodically have no service and I cannot send texts, make calls or have data. The 3G symbol shows upload and then the H symbol shows upload, but then no download bar. This problem got worse as the time went on. I also had the latest nightly installed but no luck.
I decided to wipe everything and revert back to stock. Everything was flashed back to stock, including recovery, the newest radio, etc. But my phone still doesn't work. When I turn on the phone, it just shows no service or no 3G symbol. However, when I put my roommates AT&T sim card in, it works on edge.
I am on T-Mobile, and it is really frustrating. So right now I have to use my old flip phone.
So is it my radio's problem or sim card?
hey same here my brother aswell
are you on the 2.2.1 update? I am having the same exact problem. I'm running stock rom, 2.2.1. This started 2 days ago for me. However when i switch my phone to 2G only under settings > network my phone works. I am using the 5.99 tzone are you? I am curious to see if this issue is only for 5.99 tzone 3G leechers or all users of the nexus one. a guy in seattle i spoke to has the same issue. so does my brother who also has the 5.99 tzone.
yea, im on the new 2.2.1 update too. but i have the unlimited data plan.
so i did some more testing with my friends samsung vibrant with my sim card, everything worked great. got like 2mb down.
i used his sim card in my phone, and same problem. it only shows upload and no download. but i was able to send and receive texts and make calls, but no data.
yea something is wrong for sure man just called my buddy and he has unlimited data and 3g is not working at all
internet2.voicestream.com works fine put it in apn in settings
that worked for me, but still only on 2G.
every time im on 3G, its so sporadic. and not reliable at all
is it possible for the radio hardware to die over time?
I got a device swap today on my Nexus One, so I rooted the replacement phone and restored a nandroid backup of my previous setup with CM6.1 RC1. No problem so far.
Within a few hours of doing this, I noticed my phone still had the FRF91 (4.06) radio. On my previous N1 I'd flashed the 5.12 radio and it was working well, so I flashed it using the appropriate update.zip.
I should point out that I always keep my phone in 3G mode because my provider, WIND Mobile, does not have a 2G network, and any time it's on 2G it is roaming on a partner network at a higher cost to me. I also have data roaming disabled.
After the phone restarted, I noticed within a few minutes that it was connected to the roaming network (WIND Away) and using EDGE data - even though it was set to 3G-only mode *and* no data roaming! I quickly disabled data and flashed back to the 4.06 radio. I didn't see the problem again.
But now upon further testing, I'm still seeing something disturbing. If I flip it to EDGE mode it connects to WIND Away, but the signal indicator doesn't have the roaming "R". Somehow the phone does not recognize that it's roaming anymore. This is incredibly dangerous because it could rack me up huge data charges. Prior to the device swap, any time it was on Wind AWAY I would get the "R". And when I put in my T-Mobile SIM while in Canada, I do get the "R" as well.
Any thoughts on what to do?
I'm having the same problem. I don't think it's related to the radio, but rather 6.1 rc (or in my case nightly ver 245). I'm using radio 5.12.00.8, and when I restore a nandroid backup of cm 6.0, using the same radio the roaming indicator works as it should. Looks like it might not confined to NexusOne http://forum.cyanogenmod.com/topic/9065-is-cm61-rc1-better-than-cm6-stable-for-you/page__view__findpost__p__83991 Hopefully it's not some Wind quirk with cm 6.1
Hammy
hammies said:
I'm having the same problem. I don't think it's related to the radio, but rather 6.1 rc (or in my case nightly ver 245). I'm using radio 5.12.00.8, and when I restore a nandroid backup of cm 6.0, using the same radio the roaming indicator works as it should. Looks like it might not confined to NexusOne http://forum.cyanogenmod.com/topic/9065-is-cm61-rc1-better-than-cm6-stable-for-you/page__view__findpost__p__83991 Hopefully it's not some Wind quirk with cm 6.1
Hammy
Click to expand...
Click to collapse
Yikes, glad to hear I'm not the only one. Let me summarize:
- WIND SIM roaming on T-Mobile: Roaming symbol.
- T-Mobile SIM roaming on Rogers 2G: Roaming symbol.
- T-Mobile SIM roaming on WIND 3G: Roaming symbol.
- WIND SIM roaming on Rogers 2G: No roaming symbol, tries to access EDGE data (OUCH! expensive).
This should probably get its own topic at the CyanogenMod forum.
The Testing screen (*#*#4636#*#*) also has an entry for "Roaming", and when I'm on WIND Away it says "Not roaming" - boo.
I created a thread about this on the Cyanogen forum :
forum.cyanogenmod.com/topic/10193-cm61-rc1-and-roaming-indicator/
But so far it's mainly me :/
Sent from my Nexus One using XDA App
Just an update, the problem has been resolved for future builds of CM. Read the link to the CM forums for more detail.
I looked back in the forum a couple weeks for similar threads but couldn't find one that was just like this issue.
On the stock ROM that came with the phone and with the d3rpOne ROM (Android 4.1.2, HTC Sense 5) I can get LTE working fine. I don't think it even really requires any airplane/network mode toggling.
This morning I tried Beanstalk (Android 4.3, CM 10.2) and two different releases of another CM ROM (Android 4.3, CM 10.2 and Android 4.2.2, CM 10.1).
The general instructions with those ROMs were just to toggle the network mode between LTE/CDMA and CDMA only, or to toggle airplane mode. Neither worked.
So how can I fix this? I don't really like Sense-based ROMs, but I definitely don't want to be without a good data signal.
Having the same problem. With the stock ROM, I get 4G. On CM 10.1.3, I can get 3G after toggling the network mode, but I can't get 4G.
LTE works for me using beanstalk with out doing anything special
Yeah, I got the impression that was the norm with most people. I might not have read the full thread, but I did read the first and last few pages and it seemed like everyone got 4G working at some point.
Glad I'm not the only one with this issue, though!
Bump for a new week.
Voice dialer
Say open apns
Select lte internet
Enjoy lte
Credit goes to David in the dev forum for the fix.
The APN will change back occasionally so you need to just select lte internet again.
With lte internet selected 3g and lte will work.
Sent from my One using Tapatalk 4
That sounds like a good solution, but it's still not doing it for me.
I went to APNs and selected "Sprint LTE Internet". That alone didn't do it. I toggled airplane mode, toggled my network mode, still nothing. I tried both Global and CDMA+LTE/EvDo. I gave it a few minutes for each one and still nothing. Rebooting didn't do it either.
Is there something I'm missing? How do my screenshots look? I read that someone wasn't getting an LTE indicator when they followed these steps, so just to confirm I tried to use my browser. I couldn't connect, so it's not just a matter of the signal icon being inaccurate.
I'm still seeing the same symptoms as Roboslim. Tried the same things, got the same results.
I finally got around to flashing a new radio. Could that make a difference?
robosllim said:
I finally got around to flashing a new radio. Could that make a difference?
Click to expand...
Click to collapse
Yeah, that wasn't enough to get it to magically start working.
euresir forced
robosllim said:
I finally got around to flashing a new radio. Could that make a difference?
Click to expand...
Click to collapse
When you flash the radio are you adjusting the frequency or band? Sprint uses LTE 1900 are you/can you change that? Trying to find ways to benefit an unlocked phone and take it to another carrier as Sprint sux so bad and has no 4g in my area?
euresir forced
robosllim said:
I finally got around to flashing a new radio. Could that make a difference?
Click to expand...
Click to collapse
When you flash the radio are you adjusting the frequency or band? Sprint uses LTE 1900 are you/can you change that? Trying to find ways to benefit an unlocked phone and take it to another carrier as Sprint sux so bad and has no 4g in my area?
upowersystems said:
When you flash the radio are you adjusting the frequency or band? Sprint uses LTE 1900 are you/can you change that? Trying to find ways to benefit an unlocked phone and take it to another carrier as Sprint sux so bad and has no 4g in my area?
Click to expand...
Click to collapse
I'm not very experienced beyond flashing self-contained ROMs, so I just got a ZIP someone posted in the Sprint HTC One boards and flashed that without any modifications. It didn't break anything when I went back to a Sense-based ROM, so I'm assuming it's alright.
As for unlocking and leaving Sprint... I'm actually with Credo, who uses Sprint towers. I like them, plus I just started my contract, so I personally won't be leaving anytime soon.
One last bump, I guess.
I suppose if it comes down to it, I can deal with Sense. The system settings really are way too simplistic, but with Widget Locker and a custom launcher it's something I can live with.
Alright one MORE bump. I'm getting the CM itch again. I just gave the MoKee opensource ROM a try and am having the same issue as ever.
Are there any other possibilities out there?
Flash the latest nightly. It should work fine. Worst case do a reboot after a fresh flash when the new ROM is fully booted.
Also try installing the most current firmware.
Make sure you are set for CDMA+LTE/EVDO and also try "home only" with a stock PRL before straying from default.
Sent from my One using Tapatalk
atroph said:
Flash the latest nightly. It should work fine. Worst case do a reboot after a fresh flash when the new ROM is fully booted.
Also try installing the most current firmware.
Make sure you are set for CDMA+LTE/EVDO and also try "home only" with a stock PRL before straying from default.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
I have been flashing the latest releases for multiple ROMs and have had the same issue with all of them. I've tried reboots each time too.
Now, I might need some education on the rest of that post. Where can I get the latest firmware? Would that be an official Sprint/HTC thing?
I've messed with a lot of different combinations of settings after flashing these ROMs. I've done CDMA+LTE/EVDO and I'm pretty sure I've done "home only" (would the other option be "automatic"?). As for the PRL, would updating it from the system settings give me a stock PRL?
robosllim said:
I have been flashing the latest releases for multiple ROMs and have had the same issue with all of them. I've tried reboots each time too.
Now, I might need some education on the rest of that post. Where can I get the latest firmware? Would that be an official Sprint/HTC thing?
I've messed with a lot of different combinations of settings after flashing these ROMs. I've done CDMA+LTE/EVDO and I'm pretty sure I've done "home only" (would the other option be "automatic"?). As for the PRL, would updating it from the system settings give me a stock PRL?
Click to expand...
Click to collapse
There is a firmware thread here:
http://forum.xda-developers.com/showthread.php?t=2406330
Download the latest version and flash in CWM or TWRP.
The radios are the firmware images.
Changing the PRL can only be done in stock ROM, or by using QPST. The stock rom is by far the easiest if you have your MSL. Sprint should give you your MSL once you give tech support a call. If they don't then call back and get another tech. (I have never had a problem).
I would recommend using the latest stock PRL. I have noticed that if I try to roam on 3g there is a problem getting data (verizon towers IIRC). I believe that is because it is using EVDO vice eHRPD for 3g. What the difference is?? Well I don't know?
I do know that evdo and 1x still have ongoing issues. So I usually stick with home only to ensure that I stick with Sprint towers. I believe that this is the issue with me connecting to 3g data to my airave as well.
Could you post a screen shot of your APN settings?
Voice Dialer > Say "open apns" > select the menu that pops up and then screen shot what you see.
Should look like this.
atroph said:
There is a firmware thread here:
http://forum.xda-developers.com/showthread.php?t=2406330
Download the latest version and flash in CWM or TWRP.
The radios are the firmware images.
Changing the PRL can only be done in stock ROM, or by using QPST. The stock rom is by far the easiest if you have your MSL. Sprint should give you your MSL once you give tech support a call. If they don't then call back and get another tech. (I have never had a problem).
I would recommend using the latest stock PRL. I have noticed that if I try to roam on 3g there is a problem getting data (verizon towers IIRC). I believe that is because it is using EVDO vice eHRPD for 3g. What the difference is?? Well I don't know?
I do know that evdo and 1x still have ongoing issues. So I usually stick with home only to ensure that I stick with Sprint towers. I believe that this is the issue with me connecting to 3g data to my airave as well.
Could you post a screen shot of your APN settings?
Voice Dialer > Say "open apns" > select the menu that pops up and then screen shot what you see.
Should look like this.
Click to expand...
Click to collapse
I'll have to re-flash a CM ROM before posting a screenshot, but from what I recall my APN settings looked like your image. I had "Sprint LTE Internet" selected. I'll flash the latest firmware from that thread while I'm at it.
As for the MSL, I'm not getting my service directly through Sprint. Would I get the MSL from my carrier, then, or would I have to get in touch with Sprint somehow? Do you know how that works? Either way, that'll probably take a little more time and waiting around than just flashing some stuff.
Once I get that MSL, what are the steps to set my PRL?
Who is your carrier? Did you buy the Sprint version off contract?
Sent from my One using Tapatalk
Hello all I have successfully unlocked my Sprint one to work with t-mobile my only issue now is I have no mobile data I can make calls and text though. I tried adding the regular and lte apns and nothing is working using first radio
Using Viperone 3.1.0 RC2
Thanks!
NVM just seems spotty after keep removing sim it now works...for now..
Need More INFO... What ROM? S-OFF/ON?? HBOOT?
Try toggling Airplane mode on for like 30 seconds then toggle off.
Dogie52 said:
Hello all I have successfully unlocked my Sprint one to work with t-mobile my only issue now is I have no mobile data I can make calls and text though. I tried adding the regular and lte apns and nothing is working using first radio
Using Viperone 3.1.0 RC2
Thanks!
NVM just seems spotty after keep removing sim it now works...for now..
Click to expand...
Click to collapse
Can someone please help me I got the phone unlocked and using it on t mobile decently but I have a problem the mobile data WONT connect as if there's some software denying it wcdma preferred is the only way I luckly rebooted then got h service ever since then no go If I put it to gsm only it will recieve data but only on e I know I'm in a 1900 MHz zone I live in los Angeles...... Can someone please help me to get mobile data working from t mobile on htc one
Insercoin ROM kit kat
S-on
stark1159 said:
Need More INFO... What ROM? S-OFF/ON?? HBOOT?
Try toggling Airplane mode on for like 30 seconds then toggle off.
Click to expand...
Click to collapse
Hello, I just purchased an unlocked HTC One M7 to use on Rogers. LTE works 100%, HSPA works 100%, 3G works 100% (meaning I can use the data flawlessly). HOWEVER, I cannot make or receive any phone calls if I am in GSM/HSPA/LTE mode.
When I call my phone while in LTE mode, I can see my phone switching from LTE to HSPA/3G immediately (that's supposed to happen since calls cannot be made over LTE atm) but the phone does not ring at all.
IF I put my phone in GSM/HSPA mode, then incoming/outgoing calls work flawlessly... if I switch back to LTE mode I can't make/receive phone calls anymore. I know for sure it's the LTE mode cuz I tried 4-5 times switching back and forth between GSM/HSPA/LTE to GSM/HSPA only mode and phone calls ALWAYS work under GSM/HSPA and RARELY work under GSM/HSPA/LTE (a couple times it did go through but 95% of the time it doesn't work).
I tried flashing a new modem, a new ROM and everything but it's still the same problem.
Does anyone have any suggestions? Thanks!
EDIT - Just noticed that calls stop working in 3G mode too until I restart the phone
EDIT 2: Alright, from going through *#*#4636#*#* I've isolated it down to HSPA+. Phone calls ONLY work on HSPA+ and not when it's on 3G or LTE. Any ideas?
Flash a full ruu ?
My phone does this as well. but i dont have any problems getting calls or sending calls. If using LTE it drops to 3G while on the call. Though my phone is screwed and i never get HSPA+. Really wish there were more Bell users around.
I experimented all day yesterday with several different roms, downgrading down to JB back up to KitKat, tried a few different modems but still nothing calls ONLY work on HSPA.. u think it's a defective radio or something? my phones not under warranty either is there a way to get it fixed
i think its the firmware not matching up with radio. or having the wrong radio all together. I cant get S-off so its made it a pain in my ass. Ive pretty much given up hope lol. I could take my phone back to sense 5.5 stock with a nandroid that i have and everything works normal but i like sense 6 so ive just learned to deal.
if i could get any of the latest Bell or Telus radios it may be a help.
Howie3045 said:
i think its the firmware not matching up with radio. or having the wrong radio all together. I cant get S-off so its made it a pain in my ass. Ive pretty much given up hope lol. I could take my phone back to sense 5.5 stock with a nandroid that i have and everything works normal but i like sense 6 so ive just learned to deal.
if i could get any of the latest Bell or Telus radios it may be a help.
Click to expand...
Click to collapse
With your issue, phone dropping to 3G while on call it is normal because right now there is no voice over LTE. So the phone has to drop down to the either HSPA or 3G, whichever one is available.
and yeah you might be right about not having the right modem, but I can't find a Rogers modem ANYWHERE. The only one I found was part of a RUU to get back to stock if anyone has even an oldd Rogers HTC One M7 radio, please please please post a TWRP/CWM flashable version of the modem lol