Please help. It seems that my Galaxy Mini GT-S5570 is hard bricked already. I tried all the solutions there is in our website here and no solution until now. I am now stuck in the Galaxy Logo forever.
I tried rooting it applying update.zip firmwares but it didn't work.
I also tried wiping cache and date but it didn't work.
I also tried to flash via odin but there is no yellow text on the upper left. Odin does not recognize the phone.
I already downloaded samsung devices and i have kies installed already.
This is how it looks like when it is in recovery mode (power button + home button)
as you can see, i only have 4 choices:
Reboot System Now
Apply update from SD Card
Wipe Data Factory Reset
Wipe Cache Partition
Please HELP!!!!
Go to download mode and connect to computer ? This recovery is stock Flash cwm
Try connect to the other PC and try again with ODIN...
wrong section.
Hard bricked = deal with it.
Give it to service or throw to the drawer.
what you wanted to achievie by rooting bricked phone ?
delete kies , restart computer, install samsung usb drivers (xda), restart computer. Turn on into download mode, connect to computer, flash stock, when it start to boot take off battery (unplugged phone) and insert, go to recovery and factory reset. if it won't help, buy new phone
this is not a hard brick
just select the thoice with "factory reset" and normally everything will be just fine , if you can go to recovery so you can theorically get your phone back , i think xda is about helping each other not saying hard brick=deal with it .
As you can clearly see I did proposed solution. But it really should be moved to mini 1 section. mini 2 and mini 2 "revive" procedures may be a little different and we don't want to propose hellp that can totally brick phone, don't we ?
Related
i want to flash new firmware but i have little problem...now my tab is show exclamation point between a phone and a computer.
but Galaxy tab can not remove battery for reset this error...
Help me please....
water30 said:
i want to flash new firmware but i have little problem...now my tab is show exclamation point between a phone and a computer.
but Galaxy tab can not remove battery for reset this error...
Help me please....
Click to expand...
Click to collapse
what did you do to get to this screen? Is this after or before you upgraded firmware?
GANJDROID said:
what did you do to get to this screen? Is this after or before you upgraded firmware?
Click to expand...
Click to collapse
after upgrade firmware odin show reset but the my tab not reset then i just manual reset (i can take this method for my galaxys ) after that.....
Edit:
Had the exact same thing happen to me, but its just a bad flash.
Download the JM6 zip (in the development forum) and flash it via Odin. after the device has rebooted, if the previous apps havent been deleted, go into recovery and perform a factory reset and reboot again
i have the same problem, phone - exclamation point - computer ... but i can't get into recovery mode to do a wipe .
is i press VOLUME UP or DOWN + POWER i always end up with the same exclamation point screen ... any help?
primeroz said:
i have the same problem, phone - exclamation point - computer ... but i can't get into recovery mode to do a wipe .
is i press VOLUME UP or DOWN + POWER i always end up with the same exclamation point screen ... any help?
Click to expand...
Click to collapse
Read my above post. Go into download mode (volume down + home + power) you'll still have the same image but the phone WILL be in download mode. Then flash your previous firmware and you're sorted.
Sent from my GT-P1000
You probably got that by messing with the kernel. Fund the zImage from the firmware, extract it with a .tar extractor then use something like heimdall to flash the kernel and it should work.
Sent from my GT-P1000 using Tapatalk
Hi. I'm looking for solution for my problem but nothing has helped me. I cannot restart mu GTab or put it in download mode. I always land into Android system recovery <3e>.
My problem: I cannot restart my GTab anymore. It started when I wanted to do a backup with ROM Manager. Unfortunately EURO TAB isn't supported yet. Then I want to find out whether nandroid backup is possible. From ROM manager I booted into recovery. But there isn't nandroid backup. And now I cannot boot GTab anymore. Every time I restart it brings me back to Android system recovery <3e>. I would be grateful for every solution.
Help please
slaia said:
Hi. I'm looking for solution for my problem but nothing has helped me. I cannot restart mu GTab or put it in download mode. I always land into Android system recovery <3e>.
My problem: I cannot restart my GTab anymore. It started when I wanted to do a backup with ROM Manager. Unfortunately EURO TAB isn't supported yet. Then I want to find out whether nandroid backup is possible. From ROM manager I booted into recovery. But there isn't nandroid backup. And now I cannot boot GTab anymore. Every time I restart it brings me back to Android system recovery <3e>. I would be grateful for every solution.
Click to expand...
Click to collapse
Having the same problem too... anyone can help?
If you see Phone-!-Pc on the Tab screen it is the download mode.
You can reflash it using Odin, however, you will need to do full Rom flash. I had similar problem and solved it by replashing.
I followed the latest guide published in this forum and Roto-JME rom with reformatting of internal sd.
Phone ! PC error FML!!!
GANJDROID said:
Edit:
Had the exact same thing happen to me, but its just a bad flash.
Download the JM6 zip (in the development forum) and flash it via Odin. after the device has rebooted, if the previous apps havent been deleted, go into recovery and perform a factory reset and reboot again
Click to expand...
Click to collapse
Where can i download the JM6 zip??
Hey guys,
I tried to manually update my tab to Gingerbread today via Odin, but it kept hanging on select partition (I discovered I used the wrong PIT for the firmware I was going to flash, but as I didn't select the firmware yet that shouldn't be a problem). At last I decided to quit Odin (which might have been stupid...) and try it again. Then it kept haning even earlier, so I tried to restart the device in download mode. However, whatever I try it keeps giving the Phone ! PC sign. If I try to just boot, if I try to go into recovery mode or if I try to go into download mode. I saw a lot of possible ways to solve the problem, but my PC doesn't recognize the tab anymore. If I connect it, it does give the "usb device connected" sound, but there is a popup which sais "USB Device not recognized. One of the USB Devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message". I already tried to reinstall the driver but it doesn't work. Also Odin and Heimdall don't detect any device.
Does anyone know a solution for this problem? Maybe taking the battery out? (for which I have to buy a new triangle screwdriver, so I need to know if it could possibly work first. It takes some weeks to order such a thing I think...)
EDIT: I played around a bit with the drivers again, and suddenly both Heimdall and Odin recognized it. However Odin stopped recognizing it again. Then I pressed "read PIT" in Heimdall, which worked. After that the device started booting up to the Samsung logo animation and then powered off again. Now it doesn't do anything anymore, not even showing the Phone ! PC screen. I'll charge it overnight (maybe it's gone empty during the process), so I hope that helps.....
In some strange way, the phone works again..... So never mind my post above.
my phone was soft bricked from installing cm10 previews a while back, and recently ive got time to try and unbrick it
i flashed stock tw jw7 with odin and wiped data and cache in stock recovery, pictures of which are attached
but it is still soft bricked
even worse, although i can enter download mode, odin doesn't recognise it when i plug it in
what should i do to fix both the odin problem and the soft brick, if not either?
aaronsclee said:
my phone was soft bricked from installing cm10 previews a while back, and recently ive got time to try and unbrick it
i flashed stock tw jw7 with odin and wiped data and cache in stock recovery, pictures of which are attached
but it is still soft bricked
even worse, although i can enter download mode, odin doesn't recognise it when i plug it in
what should i do to fix both the odin problem and the soft brick, if not either?
Click to expand...
Click to collapse
For USB,
(i) re-install these drivers 64 bit | 32 bit and then
(ii) check cable
(iii) if the above 2 does not help then follow this link for exhaustive list of solution http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
make sure the drives installed
Sent from my GT-I9001 using xda premium
Ok, so many posts about broken glass... I did not find one of my model so here it goes.
I broke my screen.
Well here's the situation. Already got another phone so will try to repair the screen somewhere...
But i need to do 2 things first.
1) recover the data in the internal memory
2) Flash a new rom (or do a factory reset if possible) and format the sdcard
The issue is that with the broken glass it's very difficult (duh), so what i need are the steps for getting to the mount USB in the CWM, and to the Format sdcard or factory reset
What i mean is something of the sorts of "3 times volume down, enter, 2 up, enter" etc etc
I checked download mode and it's working fine, Odin detects the phone, so basically i know it works.
So i'll go into CWM.... can someone guide this blind man? hahahahaha
Have the Semaphore Kernel for JB version 2.9.15
Thanks
Lordi
Have you tried to connect to the computer, it should show up as a removable drive. Also you could use the Samsung Kies software to upgrade the phones original rom, which would effectively reset the phone, all you would need to do is run Kies then connect the phone to the computer, switch the phone on and wait until the rom loads to the lock screen,unlock it and Kies should then connect to the phone.
[SOLVED]
OK, found the steps watching a video about another thing.
Basically you turn on the device using the 3 button combo to put into CWM and do: Up (4 times), Power, Up 2 times (power).
That mounts the USB.
Just for anyone who needs it.
Lordi
Thanks for sharing your solution!
Hey guys.
I got here a Samsung Galaxy Ace S5830 (without i) and this phone doesn't turn on. Sometimes I'm getting into the "Emergency dload mode" but the usual download mode or recovery doesn't work. In december 2012 i flashed CM7 on this phone, after that I did nothing which could brick the phone. If I'm trying to plug it into my computer to odin that device the computer doesn't recognize the phone ("USB-Device not recognized", so it's not a driver problem, the whole device isn't recognized). If I turn the phone into that emergency dload mode by pressing volume+home+power this mode disappears after a few seconds, sometimes after 3, sometimes after 6, sometimes after 10 seconds. Can it be the battery? I already charged the phone half an hour. Do you think I can reanimate that phone? Or you think i need to jtag it?
Thanks in advance for any help!
Hi skayable,
You could read this hubix's tutorial http://forum.xda-developers.com/showthread.php?t=1034145
Good luck.
Sent from my GT-S5830 with AceOne 2.1
But my Problem is that neither Odin nor my Computer recognizes the phone. I am not getting into download mode. Only in the emergency download mode which is not flashable with Odin.
But thanks anyway. I think that phone is dead.
Sent from my Desire HD using xda app-developers app
skayable said:
But my Problem is that neither Odin nor my Computer recognizes the phone. I am not getting into download mode. Only in the emergency download mode which is not flashable with Odin.
But thanks anyway. I think that phone is dead.
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
Hi skayable,
You could try installing the drivers, again, just in case.
Good luck.
Sent from my GT-S5830 with AceOne 2.1
Did you take the battery out before pressing all the buttons? I've bricked mine a few times now (noob) and have managed to get a connection with Odin each time. Sometimes takes a few attempts, poss to do with my hands being too small to hold all buttons and put battery back in. One time, Odin took several minutes to find the device.
It's probably not a good idea to be using a flat battery. And do try re-installing the Windows standard drivers. Don't give up! If a noob can do it ...
So I sent that phone in service. They said, that the software was modified and the warranty is void. I said, they shouldn't repair it and send it right back. When I got the phone back, it worked! They flashed a new bootloader, found out that it's rooted and sent me back. Good method to get it repaired
That's so funny.
Help with my galaxy ace bricked
Hi guys, im using a rooted 2.3.6, then i did the partition for link2sd, and everything worked perfect, however since i downloaded some apps first before doing the partition, i decided to do factory settings on the phone settings so it would be like a fresh internal memory then begin downloading when link2sd is already placed, however after doing factory reset on settings, my phone just keep on rebooting, everytime i open it, i downloaded the firmware in sammobile, as per advised, however im not sure how to flash it. should i use ODIN, or use CWM and do this process.
Using CWM.
Copy Zip to SD Card
Reboot into recovery
Wipe Data/Factory Reset
Wipe Cache Partition
Install Zip From SD Card
Flash ROM
Reboot
or should i follow this instruction via odin
http://www.droidacid.com/how-to-flash-official-firmware-on-galaxy-ace-gt-s5830-using-odin-droidacid/
Thanks,, kindly reply to this, need help badly.
jhay0017 said:
Hi guys, im using a rooted 2.3.6, then i did the partition for link2sd, and everything worked perfect, however since i downloaded some apps first before doing the partition, i decided to do factory settings on the phone settings so it would be like a fresh internal memory then begin downloading when link2sd is already placed, however after doing factory reset on settings, my phone just keep on rebooting, everytime i open it, i downloaded the firmware in sammobile, as per advised, however im not sure how to flash it. should i use ODIN, or use CWM and do this process.
Using CWM.
Copy Zip to SD Card
Reboot into recovery
Wipe Data/Factory Reset
Wipe Cache Partition
Install Zip From SD Card
Flash ROM
Reboot
or should i follow this instruction via odin
http://www.droidacid.com/how-to-flash-official-firmware-on-galaxy-ace-gt-s5830-using-odin-droidacid/
Thanks,, kindly reply to this, need help badly.
Click to expand...
Click to collapse
In case of bootloop use odin and flash a stock rom.
Galaxy Ace 2 18160
Hi,
My son had this phone and rooted it, bricked it and dumped it. I would like to see if I can make it work again. It is hard bricked so the three button combo doesn't work. Can this be phone get working again?
i was going give my phone to a friend so i reset it via settings and also the internal memory but it now stuck on samsung logo no matter how many times i tried. i cant even go to recovery mode. it was working fine until i reset it. please help me
shaun95 said:
i was going give my phone to a friend so i reset it via settings and also the internal memory but it now stuck on samsung logo no matter how many times i tried. i cant even go to recovery mode. it was working fine until i reset it. please help me
Click to expand...
Click to collapse
Did you try flashing stock rom via Odin?
I can't get recovery mode, But i can get downloading mode, when i conect the phone to pc it doesn't recognize my phone. Drivers are properly instaled, cable usb is ok. I have tried with windows vista, windows7, windows10, and a few versions of odin, nothing work. Odin doesn't recognize and if i conect the phone in off, it shows the battery static (like empty and no moving in charge).
I had installed aryamod rom, the problem start when i did a fabric restore from setting menu. Do i kill my phone?