Related
Does anybody know a perfect fitting car craddle, like the original from LG for the P970?
Brodit is thinking about to release a cradle. So just email them that you also want a cradle, maybe this helps
Just mail to: [email protected]
why not a universal craddle?
i bought a new specific craddle after changing the mobile.
now i try this one:
Clingo Universal Vent Mount
after 4 weeks, i like it.
sorry, can't post outside links.
You can also use the craddle for the galaxy nexus from Brodit , fit 100%
Best regards,
Christian
Thanks for your replys, both are worth to take a closer look to it.
http://www.amazon.de/Clingo-Hands-F...ntierte-Technologie/dp/B003ULP9A2/ref=lh_ni_t
Rgds
MyPass
The Clingo doesn't work because it needs an even surface. The back of the 4X is uneven.
I think I give the Galaxy Nexus cradle a try if its available on Amazon. Thanks.
Looking at the pics of the Brodit for the Galaxy Nexus it looks like the Nexus has a curved base. Surely that won't fit? I want to be sure before spending £35 on one!
kovu94 said:
The Clingo doesn't work because it needs an even surface. The back of the 4X is uneven.
I think I give the Galaxy Nexus cradle a try if its available on Amazon. Thanks.
Click to expand...
Click to collapse
hmmm, i use clingo ( car vent ) since 4 weeks and it works.
Best regards,
rAiSt
Only the passive Brodit holder fits.
rAiStGER said:
hmmm, i use clingo ( car vent ) since 4 weeks and it works.
Click to expand...
Click to collapse
Can you post some pictures? I'm interested in the way how this works with the uneven surface of the back of the phone.
later or tomorrow. (i am at work by bike)
Best regards,
rAiSt
Thanks for the pictures - but I prefer a fixed installation and no window holder.
realberti said:
You can also use the craddle for the galaxy nexus from Brodit , fit 100%
Click to expand...
Click to collapse
Searching at Brodit for the holder the search shows two models:
Item no 511324
Passive holder with tilt swivel - Samsung Galaxy Nexus GT-I9250
Item no 511331
Passive holder with tilt swivel - Samsung Galaxy Nexus SCH-I515
Which one is the right one?
Thanks,
Sebastian
I bought this one - Samsung ECS-K2
I just bought a Clingo, and put a screw through the base of the ball-socket part to secure it to my Brodit base in my car!!
It holds it quite far out though, tomorrow I think I'll saw the ball-socket's arm down a bit and put a screw into the middle of it from the back of the Brodit plate.
Works well on the textured rear of the 4x, but with the Nillkin cover it did keep falling off, I guess it's a funny slightly rubbery finish
kovu94 said:
Thanks for the pictures - but I prefer a fixed installation and no window holder.
Searching at Brodit for the holder the search shows two models:
Item no 511324
Passive holder with tilt swivel - Samsung Galaxy Nexus GT-I9250
Item no 511331
Passive holder with tilt swivel - Samsung Galaxy Nexus SCH-I515
Which one is the right one?
Thanks,
Sebastian
Click to expand...
Click to collapse
It is the one for the Nexus GT, 511324
Thought I'd show a pic of my Clingo, modified by cutting off the ball-joint and screwing it to my Brodit base. (it was far too far out when I screwed the whole ball-joint arm on, and was knocked with every gear-change.
I just used my carkit I had for my SGS2, fits perfectly..
Sent from my LG-P880 using xda app-developers app
Wombat - Was it a Brodit? Active? (with charger) or just the 'passive' holder?
I was going to buy one as the 4x is only 2mm wider, and was contemplating dremelling it out a bit!! Would love to know if it fits as it is!
Thanks for the pic. Looks really cool!
Ben-B said:
Wombat - Was it a Brodit? Active? (with charger) or just the 'passive' holder?
I was going to buy one as the 4x is only 2mm wider, and was contemplating dremelling it out a bit!! Would love to know if it fits as it is!
Click to expand...
Click to collapse
No idea which make was cheapo one, passive, came with lighter cable etc.. its a snug fit, not too tight..
All buttons exposed and accessible...
Update: nothing written on the mount but phone holder says haicom gps ... if that helps
Sent from my LG-P880 using xda app-developers app
Just bought this.....should last me with note 3 I think....
Decided to get it today since it's a good price and there is not much others around...
http://www.ebay.com.au/itm/ORIGINAL...pt=PDA_Accessories&hash=item1e72ef00ee&_uhb=1
Sent from my GT-N7100 using xda premium
Nice. I may bite on this:good:
I went ahead and ordered this since I really need a good car mount. I will report back once it arrives in 1-3 weeks.
GENUINE SAMSUNG C&T (=PLEOMAX) UNIVERSAL CAR HOLDER
So.. it's just a universal mount made by Pleomax, who also supposedly makes Samsung official accessories? Kind of shady.
I'll wait for a real dock with a charger and preferably audio out over usb.
Nice find, ill get one myself too. Hopefully itll fit with my case
Sent from my SPH-L900 using Tapatalk 2
LucJoe said:
GENUINE SAMSUNG C&T (=PLEOMAX) UNIVERSAL CAR HOLDER
So.. it's just a universal mount made by Pleomax, who also supposedly makes Samsung official accessories? Kind of shady.
I'll wait for a real dock with a charger and preferably audio out over usb.
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/Pleomax
Looks legit enough for me.
this is just a tease without the USB Injector
If it had that I'd bite. $19.99 is a good price if you don't need that however.
Nice, added to my watch list...
Pity that there is not a proper car dock yet. Had to buy a new car mount aswell. I just bought some pretty generic and cheap holder from Ebay to hold the phone in place while waiting for some cheap docking solution.
amishbobinc said:
http://en.wikipedia.org/wiki/Pleomax
Looks legit enough for me.
Click to expand...
Click to collapse
I understand Pleomax makes accessories for Samsung, but this is definitely a Universal car dock, probably this one: http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-K200BEGSTA
Advertising it as a Genuine Samsung Note 2 car dock is misleading.
Does the phone detect the dock and enable car mode?
Sent from my GT-N7100 using Tapatalk 2
programatix said:
Does the phone detect the dock and enable car mode?
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
I highly doubt it since there is no micro USB integrated into it. It's just a piece of plastic so your phone doesn't know it's in it.
Just put an NFC tag on the dock. When you insert it, it will do whatever you programmed it to do.
That dock looks like any ordinary eBay generic piece of plastic, BTW. Nothing special about it, IMO. I have a generic squeeze handle one and it works great with any case. The one in the OP looks to only work naked. Not worth the hassle, IMO.
ericshmerick said:
I highly doubt it since there is no micro USB integrated into it. It's just a piece of plastic so your phone doesn't know it's in it.
Just put an NFC tag on the dock. When you insert it, it will do whatever you programmed it to do.
That dock looks like any ordinary eBay generic piece of plastic, BTW. Nothing special about it, IMO. I have a generic squeeze handle one and it works great with any case. The one in the OP looks to only work naked. Not worth the hassle, IMO.
Click to expand...
Click to collapse
Thanks for the reply. I was wondering since some phone and dock doesn't need to be connected to switch, which confused me on how does the docking work. Anyway I have some NFC tags but so far the is no good app to automatically enable the driving mode without starting S Voice. I tried tasker and I can configure it to switch to the car mode (the icon appeats) but it doesn't enable driving mode (the one which enable the phone to read out events).
Sent from my GT-N7100 using Tapatalk 2
Has anyone tried this with the Otterbox Defender? Does it fit?
Max open Cradle
Please tell me what is the actual max open?
Is it really 85 mm? Note 2 + case ...
Can you put it with slim plastic cover like Mercury?
Thank you for answer!
---------- Post added at 07:57 AM ---------- Previous post was at 07:54 AM ----------
How about the Holder:
GENUINE SAMSUNG GALAXY S2 3 4G NEXUS NOTE 2 iPhone 5 CAR HOLDER CRADLE MOUNT.
Will it fit with Slim back Case?
Anyone have bought and use it?
Thanks!
a silly question, galaxy note 2 is the same with note 8000?
Hey guys. I was just wondering if anyone knew if the Gameklip for the original note would work for our note 2. Or does someone knw of a diff kind of clip for the ps3 controller.
Edit: just received my universal gameklip with the case and its is awesome.
Sent from my SGH-T889 using xda app-developers app
I have the GK for the SG3 & was wondering the same thing.
RMXO said:
I have the GK for the SG3 & was wondering the same thing.
Click to expand...
Click to collapse
I have the GameKlip for the Note 1 and the Note 2 will NOT fit. The Note 2 is too long for a proper fit. Hopefully he makes one for the Note 2 soon.
All I needed to know. Thanks
Thread closed!
Sent from my SGH-T889 using xda app-developers app
Gameklip is now offering 2 models only. One for the SG3 and a universal one that attaches to a case for your phone with a 3M adhesive strip. They have cases for the Note 2 for $2.95, it's a generic TPU type. The wireless model plus case plus shipping to my house came to $21. The case attaches permanently to the klip so you will have to switch out any case you now have each time to use it. I have the Samsung protective case that slips off an on easily so I decided to go ahead and get the universal "case mount" since I would have had to take it off anyway with the old style system because it fit the phone too tightly to use with a case anyway. I will report back on the fit and quality once I receive the package.
gatorrph said:
Gameklip is now offering 2 models only. One for the SG3 and a universal one that attaches to a case for your phone with a 3M adhesive strip. They have cases for the Note 2 for $2.95, it's a generic TPU type. The wireless model plus case plus shipping to my house came to $21. The case attaches permanently to the klip so you will have to switch out any case you now have each time to use it. I have the Samsung protective case that slips off an on easily so I decided to go ahead and get the universal "case mount" since I would have had to take it off anyway with the old style system because it fit the phone too tightly to use with a case anyway. I will report back on the fit and quality once I receive the package.
Click to expand...
Click to collapse
yup we just ordered a handful for christmas
http://www.youtube.com/watch?v=KwjBWDhm9xU&feature=share
Sent from my SPH-L900 using xda app-developers app
whoaw, i wan't this.. what are the specific things to order from them for our gn2?
I'm disappointed with this version. I was hoping for car holder universal style arms instead of just a sticky thing to the back of a case but oh well is not like we have too many options so I will have to buy either way.
Sent from the Mighty Note International!
I just bought the moga controller before I saw this. I would get this if they made it same as they have for galaxy s3 and not some cheap tape solution.
Sent from my SAMSUNG-SGH-I317 using xda premium
Actually I'm going to wait for something better... this is not very nice at all now. :thumbdown:
Sent from the Mighty Note 2!
he needs to make one specifically for the note 2 ;(
well there is also the spider stand solution
Sent from my SPH-L900 using xda app-developers app
http://www.google.com/search?q=spid...nt-us&sa=X&v=200400000&tbm=shop&action=devloc
The note 2 is a gaming powehouse. He should definitely make one specifically for this phone. I dont like the idea of swapping cases just to use it.
Sent from my Galaxy Note 2
Considering the fact that the Note 2 is kinda heavy and rather big, i don't trust that sticky tape to hold my precious.
But, i've just bought a PS3 Sixaxis for the Note
mexiking713 said:
The note 2 is a gaming powehouse. He should definitely make one specifically for this phone. I dont like the idea of swapping cases just to use it.
Sent from my Galaxy Note 2
Click to expand...
Click to collapse
You would have to take off any case anyway because the versions made for specific phones fit too tightly to allow you to place the phone plus case into the klip. You can't expect an option for every phone/case combination. If it fits tight enough to hold the naked phone securely it won't accommodate the phone plus case.
Magnumutz said:
Considering the fact that the Note 2 is kinda heavy and rather big, i don't trust that sticky tape to hold my precious.
But, i've just bought a PS3 Sixaxis for the Note
Click to expand...
Click to collapse
3M adhesive strips are way more reliable than sticky tape. Automomile manufactures use it to attach heavy items to vehicles that are subjected to much greater stress than you will ever
subject your phone to (unless you plan on throwing it when the game gets frustrating). Just clean the attachment point with alcohol before applying and you won't need to worry about it coming off under normal use.
Sent from my SGH-T889 using xda app-developers
gatorrph said:
(unless you plan on throwing it when the game gets frustrating)
Sent from my SGH-T889 using xda app-developers
Click to expand...
Click to collapse
Now that might be a problem, i broke a few keyboards and mice in my "gaming career"
gatorrph said:
You would have to take off any case anyway because the versions made for specific phones fit too tightly to allow you to place the phone plus case into the klip. You can't expect an option for every phone/case combination. If it fits tight enough to hold the naked phone securely it won't accommodate the phone plus case.
3M adhesive strips are way more reliable than sticky tape. Automomile manufactures use it to attach heavy items to vehicles that are subjected to much greater stress than you will ever
subject your phone to (unless you plan on throwing it when the game gets frustrating). Just clean the attachment point with alcohol before applying and you won't need to worry about it coming off under normal use.
Sent from my SGH-T889 using xda app-developers
Click to expand...
Click to collapse
It may hold but it's an ugly solution. Make a note 2 compatible version like they do for sgs3.
Sent from my SAMSUNG-SGH-I317 using xda premium
sabre31 said:
It may hold but it's an ugly solution. Make a note 2 compatible version like they do for sgs3.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
I actually think it will look better than the plastic arms wrapping around the naked phone. This way the case and phone will be appear to be an integral part of the device rather than an apparent add on. Also, when I was thinking of ordering one like the original I worried that those arms, being made of rigid plastic and fitting tightly enough to keep the phone from dropping out, would eventually cause visible wear on the phone's body with repeated insertions. That should be no problem with a soft flexible case. Additionally, on the theory that the phone will eventually be replaced, it will be possible to remove the case and fit one for the Note 3, 4 or 5 to the device with a new adhesive strip. All in all it appears to be a pretty clever one size fits all solution for the multitude of devices in the market. I got notification that mine has shipped so I will soon have a better idea of how well it actually fits and will report back.
You make a lot of valid points let us know how you like it.
Sent from my SAMSUNG-SGH-I317 using xda premium
If you bought one for your original note that WILL WORK! I shoved my note 2 in it to see and it was way to strainful, so I decided to take a lighter to heat one side up to let it adjust to the longer phone, not it fits in perfect nice and tight and no issues at all!
Notice how the right side is angled a little, I can still shake it around and everything and its very sturdy still
Sent from my SGH-I317M using xda app-developers app
I recently bought a car mount for my note 2 which fits in the air vents of my car, from 'invent'. Despite what they said on the web store, it does not fit my note 2, so I get my money back, no worry about that. But does anybody know of an alternative that will fit the note 2? I specifically want an air vent solution, so others will not do.
Sent from my GT-N7100 using xda app-developers app
Isn't the phone a bit heavy for venting? Any vent mounts I've ever used cause the vent to roll down and put the phone at an awkward and unusable angle.
-----
I would love to help you, but help yourself first: ask a better question
http://www.catb.org/~esr/faqs/smart-questions.html
No need to re-invent the wheel I have been using for years Arkon Mega Grip mount and been using it for the last year with my Note 2 (also Slim Grip Ultra works great, check it out in my review, in my signature link below).. It also comes with a very sturdy air vent mount. Though I don't use it in air vent, sounds like it's exactly what you are looking for: http://arkon.com/megagrip/megagrip-windshield-vent-mount.html
What's totally cool with it, it has universal ball-joint mount so you can use it with other mounts as well.
IOTTIE! it's 10, better than any other mount and it will hold many other phones too. It's universal but sold as for the note II and s4. It'll fit most big phones.
You can stick it anywhere and it won't fall, you can also rotate it completely in any direction you want.
It's not vent mounted, but why do you want that? Theres a million better places for it.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Have you tried solution from Brodit?
On their site you can just select type of your phone and your car and the configurator will find all versions they have for your combination.
TheNetwork said:
IOTTIE! it's 10, better than any other mount and it will hold many other phones too. It's universal but sold as for the note II and s4. It'll fit most big phones.
You can stick it anywhere and it won't fall, you can also rotate it completely in any direction you want.
It's not vent mounted, but why do you want that? Theres a million better places for it.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
iOttie is good, but doesn't work well at all with Zerolemon battery. Trust me, I tested and reviewed them all (check out my signature link). Slim Grip Ultra is the only universal that fits everything up to Note 2/3 and 7"/8" tablets and it will hold a heavier phone even with ZL battery.
I use this for my note 2 with a sedio case on it
http://www.amazon.com/Aduro-Univers...Revolution/dp/B00CLDPDCE/ref=pd_sim_sbs_cps_1
works great and fully adjustable
asidrave said:
I use this for my note 2 with a sedio case on it
http://www.amazon.com/Aduro-Univers...Revolution/dp/B00CLDPDCE/ref=pd_sim_sbs_cps_1
works great and fully adjustable
Click to expand...
Click to collapse
Yep, that one is good too and working with ZeroLemon as well as Defender. Btw, you can get these for about $2 plus change on ebay if you don't mind waiting 2-3 weeks for shipping from SH
I followed vectrons advice and ordered the mega grip. Now anxiously awaiting delivery
Sent from my GT-N7100 using xda app-developers app
cyrixke said:
I followed vectrons advice and ordered the mega grip. Now anxiously awaiting delivery
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Let us know how it works out for you, and take some pictures!!!
I am using this holder and it is perfect: http://pages.ebay.com/link/?nav=item.view&id=190837202707
@phablet
Does it hold with a case?
Sent from the TermiNOTEr 2!
borijess said:
Does it hold with a case?
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
That one looks like for a naked phone only.
http://www.youtube.com/watch?v=sK_tIe052w8
http://www.youtube.com/watch?v=sn89-X7rvS0
I have this and works really good, should fit anything phabet sized even with bulky casing. While I had read reviews that it sticks on any flat surface but I hadn't tested its strength, it has been on my windshield for more than 6 months and never fall off on its own.
Kellicros said:
http://www.youtube.com/watch?v=sK_tIe052w8
http://www.youtube.com/watch?v=sn89-X7rvS0
I have this and works really good, should fit anything phabet sized even with bulky casing. While I had read reviews that it sticks on any flat surface but I hadn't tested its strength, it has been on my windshield for more than 6 months and never fall off on its own.
Click to expand...
Click to collapse
It is very interesting and perhaps finally right for me, I can only use the dashboard rough, please let you do tests to see if it really holds on a rubberized surface and rough? and a secure link? would not buy his fake.
babak said:
It is very interesting and perhaps finally right for me, I can only use the dashboard rough, please let you do tests to see if it really holds on a rubberized surface and rough? and a secure link? would not buy his fake.
Click to expand...
Click to collapse
Can't help testing because I wouldn't wanna dismount it from my windshield and go through the cleaning process, but here's a review I found on google, you may read and decide, heh.
http://www.squidoo.com/exogear-exomount2-review
Kellicros said:
Can't help testing because I wouldn't wanna dismount it from my windshield and go through the cleaning process, but here's a review I found on google, you may read and decide, heh.
http://www.squidoo.com/exogear-exomount2-review
Click to expand...
Click to collapse
Thanks but I've read reviews of disastrous amazon.it and now I have many doubts.
babak said:
Thanks but I've read reviews of disastrous amazon.it and now I have many doubts.
Click to expand...
Click to collapse
I have no idea about the problems people had, it has been in my car for a while and still working great. I live in an asian country that has hot climate through out the year with my car always parked under the sun, so i'm not sure if its the hot wheather.
Hi all !
Just bought the OnePlus 3 ! Rly gud.
But now i'm searching a car base ! Any of you have found a good one?
Is magnetic car mount safe ? (Both mechanical support and for the internal electronic of the phone.)
Thank you !
(sorry for my bad english...)
I am using a brodit car holder. Very variable but expensive. But you get a very stable holder that can be removed without damaging the car.
I am using the Version for the Oneplus One with my Oneplus 3 Mobile inkl. the wooden case.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Wow this looks good =) i will take a look
I've been using this Mountek magnetic holder over several devices, HTC M8, M10, Nexus 6P and now this 3.
To avoid sticking the metal plate on the outside of the device I put it inside.
http://androidcommunity.com/oneplus-3-teardown-easy-to-disassemble-reassemble-with-its-cool-and-solid-design-20160624/
http://www.mountek.com/shop/categories/cell-phone-mounts/ngroove-snap-3-multi-use-car-mount-smartphones-and-phablets/
magnetic car mounts are my favorite hands down.
vent vs CD vs windshield mount depends on your preference / vent configuration / sun
bluegrass55 said:
I've been using this Mountek magnetic holder over several devices, HTC M8, M10, Nexus 6P and now this 3.
To avoid sticking the metal plate on the outside of the device I put it inside.
http://androidcommunity.com/oneplus...mble-with-its-cool-and-solid-design-20160624/
http://www.mountek.com/shop/categor...multi-use-car-mount-smartphones-and-phablets/
Click to expand...
Click to collapse
Hi
I did the same for my OnePlus One... Now switched to the Three and was wondering if this would be possible for the Three as well..
Did you already open your phone and was there sufficient room to add a metal plate?
In my One I had the smallest of the two plates.. (. 25mm), if you have opened yours I guess you have used this one as well?
I have been using the magnetic mount in my car with my previous phone NEXUS 5. I never needed to use any metal plate on the phone before of it's built-in magnets inside the back of Nexus 5 which was used for wireless charging.
So it was a perfect match.
Now due to heavier weight of the phone,,, I plan on purchasing a slightly larger version of magnet mount.
But please do not that, magnets will not damage your phone but it may mess around with the built in sensors inside the phone which may rely on tiny magnets in the phone.
I remember reading somewhere that, that is the reason why Apple do not recommend using magnetic type of mounts with iPhone. or some thing like that...
But again... I really haven't had much issues with my previous phone Nexus 5 and even GPS navigation worked fine. But I did have issue where GPS directions were messed up somewhat. But worked pretty much all of other times, so I don't know whats up with that.
Hi, can you please let me know which Brodit model you got? Can't seem to find one with a cradle that has a suction cup to use in cars. Thanks.
ProClipUSA.com sells mounts specific to your car. You can then purchase a universal phone holder to attach to the mount. They sell everything you need. Might be a bit pricey, however their mounts look very professional. They take 2 minutes to install.
Sent from my ONEPLUS A3000 using Tapatalk
Flyin18T said:
ProClipUSA.com sells mounts specific to your car. You can then purchase a universal phone holder to attach to the mount. They sell everything you need. Might be a bit pricey, however their mounts look very professional. They take 2 minutes to install.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 03:01 PM ----------
Flyin18T said:
ProClipUSA.com sells mounts specific to your car. You can then purchase a universal phone holder to attach to the mount. They sell everything you need. Might be a bit pricey, however their mounts look very professional. They take 2 minutes to install.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Checked it but seems for the OP3 there's only a holder, no charging option, you said the OP1 model works for you?
KK43 said:
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 03:01 PM ----------
Checked it but seems for the OP3 there's only a holder, no charging option, you said the OP1 model works for you?
Click to expand...
Click to collapse
You probably don't want the charging option anyway due to not being Dash. Try to locate the universal holder. That way you can adjust a few screws and place any phone in it. Which mount you get is up to you .
Sent from my ONEPLUS A3000 using Tapatalk
xxgg said:
I have been using the magnetic mount in my car with my previous phone NEXUS 5. I never needed to use any metal plate on the phone before of it's built-in magnets inside the back of Nexus 5 which was used for wireless charging.
So it was a perfect match.
Now due to heavier weight of the phone,,, I plan on purchasing a slightly larger version of magnet mount.
But please do not that, magnets will not damage your phone but it may mess around with the built in sensors inside the phone which may rely on tiny magnets in the phone.
I remember reading somewhere that, that is the reason why Apple do not recommend using magnetic type of mounts with iPhone. or some thing like that...
But again... I really haven't had much issues with my previous phone Nexus 5 and even GPS navigation worked fine. But I did have issue where GPS directions were messed up somewhat. But worked pretty much all of other times, so I don't know whats up with that.
Click to expand...
Click to collapse
In my OnePlus I have added a metal plate (non magnetic). I cannot imagine this changing anything to the phone or it's sensors. Only when "hanging" on the car mount there is some magnetism involved.
Did anyone have the guts yet to open his OP3 and add a little metal plate ?
PuijkeN said:
Hi
I did the same for my OnePlus One... Now switched to the Three and was wondering if this would be possible for the Three as well..
Did you already open your phone and was there sufficient room to add a metal plate?
In my One I had the smallest of the two plates.. (. 25mm), if you have opened yours I guess you have used this one as well?
Click to expand...
Click to collapse
Yes there is enough room for the plate. I had to cut the plate for another phone so it's now 4cm which went in without any issues. Someone said it might effect NFC but since I never use this feature it doesn't bother me.
---------- Post added at 01:14 PM ---------- Previous post was at 01:10 PM ----------
PuijkeN said:
In my OnePlus I have added a metal plate (non magnetic). I cannot imagine this changing anything to the phone or it's sensors. Only when "hanging" on the car mount there is some magnetism involved.
Did anyone have the guts yet to open his OP3 and add a little metal plate ?
Click to expand...
Click to collapse
Yes. Very easy. See my previous post for link on how to do it.
im using a magnetic holder and a cheap silicon case to stick the metalplate onto, works well for me