Gear and adb - Samsung Galaxy Gear

Hooked my gear to computer ran command prompt and adb says device is offline anybody else experience this ? Did a reset on gear watch and gear manager app
Sent from my SCH-I545 using xda app-developers app

jds3118 said:
Hooked my gear to computer ran command prompt and adb says device is offline anybody else experience this ? Did a reset on gear watch and gear manager app
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
You need to turn usb debug on. It's in the settings menu in the watch
Sent from my GT-I9505 using Tapatalk

ardsar said:
You need to turn usb debug on. It's in the settings menu in the watch
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Yes debug was checked I even unchecked it and rechecked it as well as restarted my computer
Sent from my SCH-I545 using xda app-developers app

When you type in adb devices you will get a popup screen on your gear.
If you don't see it lift your watch up or tap the screen and you will see the popup
Then hit the ok tab and your good to go
Hope this helps

errol19 said:
When you type in adb devices you will get a popup screen on your gear.
If you don't see it lift your watch up or tap the screen and you will see the popup
Then hit the ok tab and your good to go
Hope this helps
Click to expand...
Click to collapse
No box to check when I pick it up. adb gives the device serial number and says offline
Sent from my SCH-I545 using xda app-developers app

jds3118 said:
No box to check when I pick it up. adb gives the device serial number and says offline
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
when I type adb devices command prompt comes up with device serial and says offline
if I don't see popup display on gear I then pick up to see gear display and check ok
then enter adb devices again command prompt comes up with device serial and says device
then your good to go
ps, im using Android Debug Bridge version 1.0.31

errol19 said:
when I type adb devices command prompt comes up with device serial and says offline
if I don't see popup display on gear I then pick up to see gear display and check ok
then enter adb devices again command prompt comes up with device serial and says device
then your good to go
ps, im using Android Debug Bridge version 1.0.31
Click to expand...
Click to collapse
My free trial of wondershare mobilego was expired so that's why I'm trying adb. I went to device manager and checked the driver and it says the driver is from wondershare not Samsung so I clicked update drivers and now they say Samsung waiting for computer to reboot to try again
Sent from my SCH-I545 using xda app-developers app

jds3118 said:
My free trial of wondershare mobilego was expired so that's why I'm trying adb. I went to device manager and checked the driver and it says the driver is from wondershare not Samsung so I clicked update drivers and now they say Samsung waiting for computer to reboot to try again
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
you could also try killing adb.exe in Task Manager for Windows
then start from beginning again, that might be why you don't get popup screen on gear

errol19 said:
you could also try killing adb.exe in Task Manager for Windows
then start from beginning again, that might be why you don't get popup screen on gear
Click to expand...
Click to collapse
Just tried that no luck
Sent from my SCH-I545 using xda app-developers app

I've also tried getting into download mode and recovery with no luck
Sent from my SCH-I545 using xda app-developers app

Update : I can get into download mode and recovery . Did a reset in recovery with no luck. I've uninstalled and reinstalled drivers no luck there either. Still getting device offline not getting any box to check for rsa key
Sent from my SCH-I545 using xda app-developers app

jds3118 said:
Update : I can get into download mode and recovery . Did a reset in recovery with no luck. I've uninstalled and reinstalled drivers no luck there either. Still getting device offline not getting any box to check for rsa key
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
found a cool vid for you to watch, how to install APK files to your Galaxy Gear using ADB
go to highonandroid.com and thank max cause he's cool
the site will have everything you need
best of luck

jds3118 said:
Update : I can get into download mode and recovery . Did a reset in recovery with no luck. I've uninstalled and reinstalled drivers no luck there either. Still getting device offline not getting any box to check for rsa key
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
try this version of adb ... might help

errol19 said:
found a cool vid for you to watch, how to install APK files to your Galaxy Gear using ADB
go to highonandroid.com and thank max cause he's cool
the site will have everything you need
best of luck
Click to expand...
Click to collapse
Hey there, none of that works, but thanks for the ideas!

Okay what I did worked. It may have already been suggested but update your version of adb. Get the latest android sdk on your PC.
Sent from my SCH-I605 using XDA Premium 4 mobile app

Related

[Q] need help with super one click (non market app)

Hello Forum first of all thank you for your support. I have an issue with (enable non market) from super one click. my device is a stock 2.2 rooted captivate, thanks again, to S.O.C. but I was unable to unlock market. I get a fail and no S.U. permission pop up on my device. Am I missing a file on my PC or my phone?
Did you root it? if you did root it, did you restart? is there an error message? if so what does it say?
When an app like Super One Click is looking for SU access, you have to watch the screen on the phone. You are supposed to get a dialog box saying that Superuser is requesting access. When you choose Yes, you should be in business.
Allmaechtig said:
Did you root it? if you did root it, did you restart? is there an error message? if so what does it say?
Click to expand...
Click to collapse
He did say his phone is rooted.
Are you using the latest version? And is it an At&t captivate?
Good Luck
PM me & let me know how it goes
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Yes it is rooted and has stock froyo but did not get any S.U. pop-up at all I did it 10 times any ideas thanx for the replies
Sent from my SAMSUNG-SGH-I897 using XDA App
monokoter said:
Yes it is rooted and has stock froyo but did not get any S.U. pop-up at all I did it 10 times any ideas thanx for the replies
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Settings> applications>manage applications> all> superuser> clear data
And
Settings>applications>development>usb debugging should be ON.
After those steps try again, make sure your screen is on and you should get a SU prompt this time.
Thanks Studscris ill give it a try
Sent from my SAMSUNG-SGH-I897 using XDA App
super one click
Whenever ive used superoneclick ive had to run my computer in administrator to get it to work..I would always enter superoneclick in admin aNd then click root and wait until its finished and then immediately click allow non market apps while phone is still connected ...I tried many times before finding the admin way. that finally worked. and this was on windows vista.hope this might help
I did what studacris said still no S.U. permission and get a fail. I'm using a Win.XP how do I put it on admin mode
Sent from my SAMSUNG-SGH-I897 using XDA App
Right click on the icon on your desktop or the .exe file and click run as administrator
Sent from my captivate running firefly!

Ugh, I got a problem..

I'm a big noob in this community. Well, yesterday I flashed a custom rom and got my captive in a loop. No biggie. I flashed it back to stock and now running elcair 2.1. I've tried hooking it up to lies mini but it seems two drivers fail to install correctly everytime. Downloaded the drivers from Samsung and other places. Contacted Samsung through live chat (never again). Ive tried factory resetting. I also need to mention I can't go into download mode or recovery. I need the 3 button mod but I've read that rom manager doesn't support eclair. Am I screwed and stuck on this firmware?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
First, forget Rom Manager. It has almost nothing for the Captivate. Second, check out my signature for an ADB Utility to help you get into download/recovery. Also, you may want to completely uninstall the drivers for the captivate, reboot, and then reinstall them again before plugging your phone back in.
ADB utility would help me go into download mode?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
If the drivers are working correctly, yes.
Red_81 said:
If the drivers are working correctly, yes.
Click to expand...
Click to collapse
My drivers ARENT working correctly. I dont know what seems to b e the problem.
As Red_81 mentioned, if you can't get into download or recovery mode, try using ADB to force it to get there. You can get it with the utility in Red_81's signature. Once you have the phone hooked up and ADB installed, just open a command prompt, navigate to where you have ADB installed, and type "adb reboot download" or "adb reboot recovery".
If the Samsung drivers aren't cutting it for you, you might want to try flashing a stock Gingerbread ROM (with bootloaders) from Heimdall. Heimdall will install its own USB driver (lib-usb), which might bypass your issue.
If you're still having driver issues, take a look at the "Captivate Connection Issues" thread in my signature. At least one of those solutions should (hopefully) work for you.
I used Odin to flash back. Would it be easier if I used a jig?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
i too am a noob. ive gotten back to 2.1 and i can get into download via adb but odin does not see my phone after adb reboot download. any ideas?
^
Same as a couple of posts up...
See this Captivate Connection Issues and Download Mode Help.
Sent from my SAMSUNG-SGH-I777 using xda premium
When I go to adb, do I go indeed mass storage mode?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
4-2ndtwin said:
^
Same as a couple of posts up...
See this Captivate Connection Issues and Download Mode Help.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
i could kiss you
^
A hit on my Thanks button will do instead...
Sent from my SAMSUNG-SGH-I777 using xda premium
xylos123 said:
When I go to adb, do I go indeed mass storage mode?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Go to Settings/ Applications/ Development and USB Debugging on.
Sent from my SAMSUNG-SGH-I777 using xda premium
ive been trying everything in the dev forum for days trying to sort this out. then i tried to log in to ask a question and found out that i couldnt post because THERE IS AN ENTIRE FORUM FOR NOOB QUESTIONS lol. his is my second smart phone that ive messed with, the first was my htc eris. the eris was like fisher price my first root kit. glad i found out about adb and odin though. thanks again man.
How am I suppose to connect it if i can't install the drivers? -.-
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Edit: Can u try a different pc to see if the drivers will load to it ??
The Stickied Threads in the Captivate Forums (Q & A and General and Development) will prove to be of much help also.
Sent from my SAMSUNG-SGH-I777 using xda premium
I've already tried. Installed, uninstalled, rebooted my computer nothing. I've been trying for two days already.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Did u try Heimdall as suggested previously. It will install it's driver only to the one usb port that u r connected to at the time of the install. ??
Sent from my SAMSUNG-SGH-I777 using xda premium
Yeah, I've tried with two computers already.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Heimdall didnt work, better yet im not sure what im suppose to do with it. What my phone does when its in Samsung kies mode is it keeps on booting up the mtp application. Whats happening there?

ADB Issues...

I am S-OFF revone -> hex edited hboot, viperROM
I apologize if this is in the wrong section. I've never used ADB before, so I'm not sure if this is device-specific. I'm pretty good with Fastboot (for some reason that works just fine) and I've read up on ADB, but I can't use commands because I'm experiencing what I believe is a driver issue.
I am running Windows 7 x64
When I plug my phone in and run a cmd window, I type
adb devices
And it shows blank in the listed devices. So, I tried sending a reboot command and it said
error: device not found
I tried reinstalling my htc drivers, and I can't get the AdbDriverInstaller or pdanet to recognize my device. Any advice would be greatly appreciated.
Sent from my HTCONE using xda app-developers app
Sent from my HTCONE using xda app-developers app
Nevermind... I fixed it. In msconfig I had disabled an HTC service a long time ago and forgot about it... D'oh!
Sent from my HTCONE using xda app-developers app

[Q] Cannot install ADB driver

When I try to install the Kindle fire ADB driver, at the very end, I get a dialog saying the driver did not install properly, or I need to reboot. I reboot and plug my kindle in, and I see the ADB driver show up in device manager. However, adb devices does not recognize it.
The EXACT same file and installation on a different computer worked perfectly fine. Both are Windows 8.1. Any suggestions to get it working on the other (newer) laptop?
My Nexus 5 is recognized by BOTH laptops via adb by the way.
I think you need to turn off driver signature verification. .
https://www.google.com/url?sa=t&sou...X-uvrC5tOQbkuNzZg&sig2=hNyRRZDUCgYwT1bb0LIn5w
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Red_81 said:
I think you need to turn off driver signature verification. .
https://www.google.com/url?sa=t&sou...X-uvrC5tOQbkuNzZg&sig2=hNyRRZDUCgYwT1bb0LIn5w
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well, a few things. I don't get an error about the driver signature. 2nd, it installed perfectly fine without any disabling on my other laptop. 3rd, I actually tried that already, it makes no difference - driver installs, I get an error, and ADB doesn't work.
I don't have windows 8 so I'm shooting from the hip. Try using other USB ports. If that doesn't work, you could try the version of adb in my signature and see if that works.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Red_81 said:
I don't have windows 8 so I'm shooting from the hip. Try using other USB ports. If that doesn't work, you could try the version of adb in my signature and see if that works.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No problem, I appreciate the help. I tried both USB ports already as well (I'm not one of those people who posts on the first failed attempt, I literally tried everything I know). I've also tried the universal ADB drivers, no help.
I'll check out your version of ADB, though I think it's something with the driver and/or installation process. It's just odd that my Nexus 5 connects to ADB fine.
cpufreak3 said:
No problem, I appreciate the help. I tried both USB ports already as well (I'm not one of those people who posts on the first failed attempt, I literally tried everything I know). I've also tried the universal ADB drivers, no help.
I'll check out your version of ADB, though I think it's something with the driver and/or installation process. It's just odd that my Nexus 5 connects to ADB fine.
Click to expand...
Click to collapse
You must disable MS driver security or you will not be able to install the drivers manually which you need to do (at this point. Use Stunts modified drivers http://forum.xda-developers.com/showthread.php?t=2459498
Edit: Check his signature in the OP at the link.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
I had a similar issue with the adb that was included with the binary root. It would never see my device, but the older adb version saw it just fine. I had to replace the adb files in the binary root with the ones from the Kindle fire utility (1st Gen Kindle tool).
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Kindle Fire 7 5th Gen

Hey guys. I've tried rooting my new Kindle Fire 7 5th Gen but the furthest I get is to the fastboot screen "waiting for device" and nothing else happens. I have downloaded and installed the device utilizes and the kindle's serial is recognized by the root program. Any ideas on what I may be missing or what may be causing the issue?
P.S I was able to install the Google Play Store using a similar program no problem. And everything seems to be working fine with that.
Sent from my KFFOWI using XDA Premium 4 mobile app
TheKhrish said:
Hey guys. I've tried rooting my new Kindle Fire 7 5th Gen but the furthest I get is to the fastboot screen "waiting for device" and nothing else happens. I have downloaded and installed the device utilizes and the kindle's serial is recognized by the root program. Any ideas on what I may be missing or what may be causing the issue?
P.S I was able to install the Google Play Store using a similar program no problem. And everything seems to be working fine with that.
Sent from my KFFOWI using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How are you trying to root? Which method? Filename of root method? Did you watch the video?
I used the method used by Root Junky in his YouTube video.
Sent from my KFFOWI using XDA Premium 4 mobile app
TheKhrish said:
I used the method used by Root Junky in his YouTube video.
Sent from my KFFOWI using XDA Premium 4 mobile app
Click to expand...
Click to collapse
having the same issue
i too was able to install google play and remove adds
did you happen to get a fix?
No. Still searching for one. I've heard something about a twrp boot but its a more complicated process and I don't want to risk bricking my device unless I get a tutorial that breaks it down simply. I guess I'll just be waiting for another method if one comes along.
Sent from my KFFOWI using XDA Premium 4 mobile app
thathectorkid said:
having the same issue
i too was able to install google play and remove adds
did you happen to get a fix?
Click to expand...
Click to collapse
No. Still searching for one. I've heard something about a twrp boot but its a more complicated process and I don't want to risk bricking my device unless I get a tutorial that breaks it down simply. I guess I'll just be waiting for another method if one comes along.
Sent from my KFFOWI using XDA Premium 4 mobile app
Sent from my KFFOWI using XDA Premium 4 mobile app
TheKhrish said:
No. Still searching for one. I've heard something about a twrp boot but its a more complicated process and I don't want to risk bricking my device unless I get a tutorial that breaks it down simply. I guess I'll just be waiting for another method if one comes along.
Sent from my KFFOWI using XDA Premium 4 mobile app
Sent from my KFFOWI using XDA Premium 4 mobile app
Click to expand...
Click to collapse
see the cm12 video, it shows how to boot twrp
http://forum.xda-developers.com/showthread.php?p=63943805
[Videos] Tutorials on how to root, flash roms and more on the Amazon Fire 5th gen.
Sent from my XT907 using Tapatalk
sd_shadow said:
see the cm12 video, it shows how to boot twrp
http://forum.xda-developers.com/showthread.php?p=63943805
[Videos] Tutorials on how to root, flash roms and more on the Amazon Fire 5th gen.
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Thanks a ton! I'll check it out. Hope its safe.
Sent from my KFFOWI using XDA Premium 4 mobile app
TheKhrish said:
Thanks a ton! I'll check it out. Hope its safe.
Sent from my KFFOWI using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's pretty safe, bootloader is locked, which means critical partitions are protected (bootloader, recovery...)
I have also posted some unbrick instructions here
Unbrick/Restore Stock 2015 Amazon Fire (KFFOWI/Ford) with custom recovery
Me Too... Check this...
I'm having the same problems... Check your device manager, when device boots to "fastboot" scren, are you getting a Yellow "Other Devices" with "Android" in it? instead of the ADB Composite under "Android Devices" the video says to look for?
I think I figured out the problem... Now just still looking for a solution.
Edited 30 min later:
I think I found it:
http://forum.xda-developers.com/amazon-fire/general/howto-install-drivers-adb-fastboot-mode-t3236187
You need to force it to use the drivers that have already been installed, just didn't get applied correctly for some reason.
Let us know if this helped... or not
AriDiz said:
I'm having the same problems... Check your device manager, when device boots to "fastboot" scren, are you getting a Yellow "Other Devices" with "Android" in it? instead of the ADB Composite under "Android Devices" the video says to look for?
I think I figured out the problem... Now just still looking for a solution.
Edited 30 min later:
I think I found it:
http://forum.xda-developers.com/amazon-fire/general/howto-install-drivers-adb-fastboot-mode-t3236187
You need to force it to use the drivers that have already been installed, just didn't get applied correctly for some reason.
Let us know if this helped... or not
Click to expand...
Click to collapse
its saying "fire" under portable devices and there is no "android devices" listed in device manager for some reason only "other devices" in which the tablet is not displaying at all
i tried the update driver software but when i point to to what the instructions tell me to windows shows an error saying there is no files compatible with my device? so im stuck
There is a stumbling block which isn't mentioned in the videos. You will need to install the driver via
Device manager
-
Browse my computer for driver software
-
let me pick from a list of device drivers on my computer
-
All
-
Have disk
At this stage point to the folder containing the driver you downloaded.
As you go through the process of rooting etc you will come to a point where it says "Fast boot" on the tablet and "Press any key to continue" on your pc, this is where the process stops dead, you need go through the driver process again while everything is still plugged in and running, you will see the device name is different this time plus it uses a different driver this time.
Everything else is as the video shows.
Sent from my SM-N9005 using Tapatalk
Connorsdad said:
There is a stumbling block which isn't mentioned in the videos. You will need to install the driver via
Device manager
-
Browse my computer for driver software
-
let me pick from a list of device drivers on my computer
-
All
-
Have disk
At this stage point to the folder containing the driver you downloaded.
As you go through the process of rooting etc you will come to a point where it says "Fast boot" on the tablet and "Press any key to continue" on your pc, this is where the process stops dead, you need go through the driver process again while everything is still plugged in and running, you will see the device name is different this time plus it uses a different driver this time.
Everything else is as the video shows.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
i am now rooted THANKS SO MUCH!! i cant believe they glossed over that small detail! :good: :laugh:
AriDiz said:
I'm having the same problems... Check your device manager, when device boots to "fastboot" scren, are you getting a Yellow "Other Devices" with "Android" in it? instead of the ADB Composite under "Android Devices" the video says to look for?
I think I figured out the problem... Now just still looking for a solution.
Edited 30 min later:
I think I found it:
http://forum.xda-developers.com/amazon-fire/general/howto-install-drivers-adb-fastboot-mode-t3236187
You need to force it to use the drivers that have already been installed, just didn't get applied correctly for some reason.
Let us know if this helped... or not
Click to expand...
Click to collapse
Thanks Mate! I will try this as soon as possible and let you know if it works. I'd much rather root than install a whole new software so I've been holding out for a while.
Sent from my KFFOWI using XDA Premium 4 mobile app
TheKhrish said:
Thanks Mate! I will try this as soon as possible and let you know if it works. I'd much rather root than install a whole new software so I've been holding out for a while.
Sent from my KFFOWI using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks again Mate! It worked! Finally! I went to device manager while in fastboot mode and sure enough it showed that the drivers weren't installed correctly. As soon as I manually installed them again I was able to finish the root process. Thanks!?
Sent from my KFFOWI using XDA Premium 4 mobile app
Lucky Patcher here I come ??
Sent from my KFFOWI using XDA Premium 4 mobile app
TheKhrish said:
Lucky Patcher here I come ??
Sent from my KFFOWI using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just so you know, all mentions of that particular app are not allowed at xda. It's considered piracy, warez, what have you.
I didn't know. I'll remove it if I get confirmation.
Sent from my KFFOWI using XDA Premium 4 mobile app
I have seen a whole discussion on lucky patcher quite some time ago that was never removed. It focused more on how it works, how to protect against it.
I do not believe simply mentioning the name lucky patcher is banned. It is recommending it for piracy that is not permitted. TheKhrish made zero mention of what she used LP for. People who were previously unfamiliar would not have even known it could be used for piracy.
blueberry.sky said:
I have seen a whole discussion on lucky patcher quite some time ago that was never removed. It focused more on how it works, how to protect against it.
I do not believe simply mentioning the name lucky patcher is banned. It is recommending it for piracy that is not permitted. TheKhrish made zero mention of what he used LP for. People who were previously unfamiliar would not have even known it could be used for piracy.
Click to expand...
Click to collapse
Thanks for clarifying Blueberry. I do not intend to use LP illegally. Just as I use Flex for IOS (Apple) I use it as one way of practicing my developer skills while I try to learn. Just as a hobby.
P.S And I'm a she.
Sent from my KFFOWI using XDA Premium 4 mobile app

Categories

Resources