Related
Hello everybody
I have used to flash old cm9 releases without any problems
But new releases starting from June enters a boot loop
I flashed stock with odoin and used a pit file and wiped everything and flashed cm9 and cm10 but again boot loop
n.b. aokp milestone 6 worked
I don't know where is the problem
Sent from my GT-P7300 using xda premium
zeema said:
Hello everybody
I have used to flash old cm9 releases without any problems
But new releases starting from June enters a boot loop
I flashed stock with odoin and used a pit file and wiped everything and flashed cm9 and cm10 but again boot loop
n.b. aokp milestone 6 worked
I don't know where is the problem
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
Are you also formatting /system before flashing?
Yes I also tried this
Sent from my GT-P7300 using xda premium
zeema said:
Yes I also tried this
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
After ODINing back to Stock, did you do a factory reset using the Stock Recovery? Yes, the one that makes you lose everything in the tablet including SDcard contents.
nirogu325 said:
After ODINing back to Stock, did you do a factory reset using the Stock Recovery? Yes, the one that makes you lose everything in the tablet including SDcard contents.
Click to expand...
Click to collapse
Yes I did
Sent from my GT-P7300 using xda premium
zeema said:
Yes I did
Sent from my GT-P7300 using xda premium
Click to expand...
Click to collapse
Are you using CWM Recovery v.6.0.0.0?
Actually I tried many versions starting with 5.1.0 and 5.5.0.4 and 6.0.0 I'dont where is the problem
Sent from my GT-P7300 using xda premium
i was having this problem with aokp ics so i back to 3.2 and wait for a new version of aokp ics and it is solved with the new version
so the rom solved it self
sorry for my english
mmostafanyw said:
i was having this problem with aokp ics so i back to 3.2 and wait for a new version of aokp ics and it is solved with the new version
so the rom solved it self
sorry for my english
Click to expand...
Click to collapse
Off-topic, but AOKP Milestone 6 will be the last ICS-based AOKP as evidenced here.
Again I successfully flashed the AOSP JB by safariking but it has some errors so I m back again to overcome 2.3.1
Sent from my GT-P7300 using xda premium
Still the same with every new cm10 releases
Kalte_kaffe should have look on this
Sent from my GT-P7300 using xda premium
Hello all, I was running Rocketrom v10 on my Note with notecore v13 kernel. Everything was going great, but decided to Gove phone to my wife (got myself an s3), so I went into the phone menu and chose factory reset. It seemed to work, but now it won't boot, the galaxy note screen loads, then it just gels blank. I couldn't get into recovery, but I could get into downloader, so I successfully flashed a pre rooted GB Rom in Odin, everything worked, Odin reported it passed, and the phone rebooted, but again it goes to the galaxy note screen, then just goes blank. I'm at a total loss, still can't get into recovery ( in saying that with the new GB Rom I'm not sure that recovery is installed-I followed the guide in the forum) I'm at the stage where I am pulling my hair out. If I could get to recovery I know I could wipe everything, but I can't been do that. Any help would be massively appreciated
Sent from my GT-I9300 using xda premium
You had been on Notecore kernel and now have flashed GB rom successfully. That mean you are not having any dangerous kernel for now.
Should go into recovery, wipe cache and data then reboot system.
If it still not working well then try to flash another GB rom (should be able to download from Dr.Ketan's thread. cheers.
Cheers for the reply, but I can't boot into recovery, doing thenwhole volume up plus home button plus power, no joy. Getting balder by the minute
Sent from my GT-I9300 using xda premium
Try flashing a full wipe gb rom using pc odin.
Sent from my Galaxy Note running ICS
Go into download mode and as altae says, flash gb rom with pc Odin. Post back if it succeeds.
Sent from my GT-N7000 using xda app-developers app
Didnth realise you could get a full wipe GB Rom, will flash when I get home from work, the Rom I was flashing was a no wipe one (only looked after your post, so mega thanks). Will post again when I have tried the full wipe
Sent from my GT-I9300 using xda premium
Good luck, dude.
Sent from my GT-N7000 using xda app-developers app
after pc odin,wipe davilk n cache,it reboot normally.good luck.
Sent from my GT-N7000 using xda app-developers app
You guys are all legends. Installed a wipe GB Rom, then custom recovery, not rocket Rom is running smooth as butter many many many thanks, I was really starting to panic I had totally knackered my phone
Sent from my GT-I9300 using xda premium
JamDonot said:
You guys are all legends. Installed a wipe GB Rom, then custom recovery, not rocket Rom is running smooth as butter many many many thanks, I was really starting to panic I had totally knackered my phone
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Glad you got out of it. Normally, unless experiencing superbrick which is quite rare, any symptoms like this are redeemable.
Sent from my GT-N7000 using xda app-developers app
Hello
I'm very keen to install and try this ROM, but I'm having a strange issue. I flash Phil's kernel first, reboot recovery, wipe and install which all goes fine. When aroma install is complete and phone reboots I get the white Samsung screen for 30 seconds or so then phone seems to reboot itself, screen goes black briefly then Samsung logo reappears for a second and I get dumped back into Phil's CWM recovery.
I have checked MD5 of ROM download, no problem there. I've tried different versions of the install from aroma (lite version etc). Not really sure what I'm doing wrong. No one else in his thread has reported problems like mine. Anyone with ideas?
Sent from my GT-N7000 using xda app-developers app
try with hydracore kernel
Well turns out the md5 didn't match up. I had checked it after downloading and all was good, but something must have gone wrong on copying it over to my SD card. My fault. Up and running now though and it's a great ROM!
Sent from my GT-N7000 using xda app-developers app
nokiamodeln91 said:
try with hydracore kernel
Click to expand...
Click to collapse
Do NOT Flash hydracore on this ROM it is not compatible.
Sent from my GT-N7000 using Tapatalk 2
dude I meant to install the rom using hydracore not to install the rom and then hydracore
Ic
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
Ic
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I have tried most of the JB leak roms.
ROCKET ROM JB has always worked for me.
sent from my Rocket ROM JB Note using XDA Premium
Hey, im a noob so heres my problem, ive experimented alot on my p1000 and one thing that bothers me alot was the video playback which was either choppy or laggy on CM so ive always restocked it back to GB. I think the solution for this is to use another kernel other than CwM. IS there any other kernels that i could try, the ones that could result in very good hd playback once im on a custom rom?
Sent from my GT-P1000 using xda app-developers app
First kernel and CWM are two different things CWM is one of the recovery mode.
For HD videos... You can use CM 10 or 9 or give AOKP SGT7 a try.... They are much stable...
Sent from Android
Ok so kernel and cwm are different i get it, but could you tell me how to install the heimdall kernel on p1000 step by step? Ive read from somewhere that it could improve hd video playback. And ive already used cm 9 stable and there is no cm 10 stable yet before but the problem persisted. . .
Sent from my GT-P1000 using xda app-developers app
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yes you're right, I kinda read wrong, the article said about the humberos, now that is a kernel right? I've installed it, and I realized that its a modified version of CwM but the real question is that do I have to keep using the firmware from humberos or could I use other custom roms like SGT7 aokp or Cyanogenmod?
It should be fine using it with other ROMs as long as both are from the same android version
Sent from my Galaxy Nexus using Tapatalk 2
Humberos is the guy's nickname. His ROM and kernel may also be referred to as Humberos.
But he made kernels back from Gingerbread days.
So we better know which one you flash.
You can use his kernel, for example his JB kernel in, in cm10 and aokp jellybean.
you can use his ICS kernel in AOKP ICS, CM9, and so on.
For CM10.1 it is yet a different kernel.
And it is not just different cwm, the kernel itself is different.
Sent from my GT-P1000 using xda app-developers app
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
bisharat said:
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
That's because you installed 4.1.2 ROM with 4.2.1 kernel... It is better for you I'd you restock then update again... And please please please install the ROM with it's kernel because both of them are good AOKP or CM
Sent from my Galaxy Nexus using Tapatalk 2
Actually from the description, installing aokp sgt7 jb after running cm10.1 should not be an issue as long as you do the 3 wipes (cache, data, dalvik-cache).
aokp sgt7 will replace the cm10.1. But nevertheless, if it is still looping, do the restock.
They are all using CWM 6.x nowadays, it doesn't really matter, but the kernel has to be for the right ROM.
BTW, too many people think cm10.1 is just a little update from cm10.
It is not. It is a completely new framework. Treat it as a different ROM.
So all I gotta do is restock back to GB, root GB, install the humberos cm 10 kernel from SD after wiping everything, and then install aokp Sgt 7 or cm 10 right?
Sent from my GT-P1000 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ok the instructions are well understandable but alotta files to download and a hell of lotta instruction manual to read. Its gonna take me a day to absorb all that and then start the "surgery" of my patient the p1000. Thanx again for the post though, will let u now through this post if any more queries. . .
Sent from my GT-P1000 using xda app-developers app
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
ok well ive flashed the overcome kernel and then I flashed the overcome 4.1 aka the overcome experience and its actually quite fantastic. On my way to flash JB from CM. btw do I have to register the divx licenses? as well as other licenses?
ok im using overcome 4.1.0 and its fabulous. but before I go towards JB, can someone pls explain how to wipe the 3 caches using the overcome kernel, since its quite new to me? also when flashing to cm jb, do I have to clear the caches and then install from internal sd card? Is that how I upgrade it, not clean install it?
ok so I flashed aokp and the big problem is that it installs cwm over the overcome kernel and so the video problem still persists. Isnt there a way to remove the cwm recovery from the aokp rom?
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
priyana said:
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I didn't read it, I just thought about it. Anyhow, I flashed aokp a few times just like you said, and flashed gapps (obviously), but result is still the same. I'll post a video ASAP on the video playback performance that I'm still complaining about...
Video is a kernel/codec related problem.
It is not logical to link it to gapps or cwm.
Sent from my GT-P1000 using xda app-developers app
Ok so its a kernel/codec problem, what to do about it?
Sent from my GT-P1000 using xda app-developers app
Hi guys,
My girlfriend just got the S3 Mini (GT-8190N) and she wants it to be rooted and also a bit more slim i.e. without the bloatware.
However I can't seem to find that many ROMS for the phone - is it because it's fairly new (being with NFC)?
If you know of any good rooms - please let me know.
Thanks
Jonas
You can install any rom but your NFC wont work.
Sent from my GT-I8190 using XDA Premium 4 mobile app
Dmod V6. Its for all versions
Gesendet von meinem GT-I8190
Cyanogenmod 10.2 from Maclaw, android 4.3.1, fast, stable and bloatware free. Only Nfc not working.
Dmod v6 will be fine
Sent from my GT-I8190 using xda app-developers app
DeHuMaNiZeD said:
You can install any rom but your NFC wont work.
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
In other words, it will perfectly safe to install a normal 8190 rom on a 8190N phone with only NFC not working?
Thank for all of your replies guys.
only your nfc wont be working. i have same phone as you and using maclaw cm10.2.
You can root the device and remove the bloatware with titanium backup.
Hey. which rom is better Cyanogenmod 10.2 from Maclaw, android 4.3.1 or Maclaw 4.2.2 ?