The travel adapter who came with LG G2 (d802 international) is really huge. Not really handy for having it with me at all time.
I search a travel adapter with same specification (5.0v 1.8A) but smallest.
A lot of travel adapter are 1A, some are 2A, but not found 1.8A.
darian2 said:
The travel adapter who came with LG G2 (d802 international) is really huge. Not really handy for having it with me at all time.
I search a travel adapter with same specification (5.0v 1.8A) but smallest.
A lot of travel adapter are 1A, some are 2A, but not found 1.8A.
Click to expand...
Click to collapse
So what? You can charge the phone with either of them, just that it will take longer/shorter time to charge. I prefer lower amp chargers not to strain the battery, so I usually use my 500mA or 1A charger.
Related
Ok, so I took my Inc on it's first run yesterday as a full-time GPS. It sat in the Verizon dock, plugged into my Griffin dual-port USB cig. lighter adapter.
It made the entire 3.5 hour trip, but when I got there, and removed the phone from the charger, it was at 9%. It had started at 100%. So, obviously, the 5V .5A that the Griffin outputs is not enough to run the GPS and at least maintain charge.
Does anyone know where to get a 5V 1A car charger? Unfortunately, most manufacturers don't even list the amperage output of their devices either online, or even on the packaging!
Thanks,
Doc
DocTauri said:
Ok, so I took my Inc on it's first run yesterday as a full-time GPS. It sat in the Verizon dock, plugged into my Griffin dual-port USB cig. lighter adapter.
It made the entire 3.5 hour trip, but when I got there, and removed the phone from the charger, it was at 9%. It had started at 100%. So, obviously, the 5V .5A that the Griffin outputs is not enough to run the GPS and at least maintain charge.
Does anyone know where to get a 5V 1A car charger? Unfortunately, most manufacturers don't even list the amperage output of their devices either online, or even on the packaging!
Thanks,
Doc
Click to expand...
Click to collapse
sounds like you might be best off with a power inverter and a wall adapter. or you could buy a car that has a 2 prong outlet in it like mine
Teksu said:
sounds like you might be best off with a power inverter and a wall adapter. or you could buy a car that has a 2 prong outlet in it like mine
Click to expand...
Click to collapse
As an EE that's really inefficient. Belkin USB Micro Charger does 5V @ 1A max. It's marketed as an iPhone/iPod car charger but it does work for the Incredible since it doesn't have any fancy charger lockouts. There is also a 2 output version with a 1A and 500mA plug.
I'm looking for a car charger for my HD2, and upon browsing Amazon it seems like most of these USB chargers provide an output of 5V and 1200mA, which is slightly more than the 1A a regular wall charger provides.
At first I just ignored these chargers, but there's plenty of them, so I began to wonder if maybe 1.2A isn't too much for these devices to handle? It's Amazon, so I suppose most of them are of decent quality too.
Thanks in advance
The device will only pull the power it needs. You could even go for a 2A model. The voltage is the one that needs to be matched.
been using my dad's BlackBerry car charger for my HD2, no problems yet
I bought what i thought were a couple higher quality universal chargers. They charge my razr fast but won't charge my nexus 7 at all. I have one of the chargers pulled apart but before I do any soldering I want to make sure -- if I cross the 2 data points will it work?
Well I couldn't wait 10 minutes so I tried. Answer: no. Wtf?
Can anyone tell me how to hack these chargers to make them work? Is there a resistor I need to remove?
Isn't it more likely to be a software thing?
With my samsung Tab 7.7 i couldn't charge it using my ipad charger until a Dev modded the software on the tablet.
are they 2Amp chargers? most universal chargers are only 1Amp
Well whatever the problem is, I want to charge my tablet in more than one place, I want to charge it faster than the 16 hours generic chargers are taking, and I don't want to pay $30 for OEM chargers.
If your tablet is taking 16 hours to fully charge, return it. I can drain mine after heavy use of the day and its still fully charged in under 6 hours.
Sent from my Nexus 7 using xda app-developers app
@soldeus: There's nothing wrong with my tablet. The OEM charger works fine and some of my generic chargers work, they just don't have the current. (See below)
@vivan: They are 1A chargers, but they should still work. They don't charge at all. The 500ma Blackberry charger I'm using here at work will charge it in about 8 hours.
Ironically the move to almost-universal micro usb chargers has made the market for them even worse. Now, instead of having to buy a new charger every time you buy a new phone, you have to buy a dozen different chargers till you find one that actually works. Like I said, I didn't try to cheap out. I got a high quality charger.
qoncept said:
@soldeus: There's nothing wrong with my tablet. The OEM charger works fine and some of my generic chargers work, they just don't have the current. (See below)
@vivan: They are 1A chargers, but they should still work. They don't charge at all. The 500ma Blackberry charger I'm using here at work will charge it in about 8 hours.
Ironically the move to almost-universal micro usb chargers has made the market for them even worse. Now, instead of having to buy a new charger every time you buy a new phone, you have to buy a dozen different chargers till you find one that actually works. Like I said, I didn't try to cheap out. I got a high quality charger.
Click to expand...
Click to collapse
The OEM charger is 2A for a reason. Because the tablet uses more power, it needs more current to charge at a fast pace.
Your generic 1A chargers are probably just enough to keep the tablet powered on, without draining (or charging) the battery.
If you can find a 2A universal charger, it should work just like the OEM one.
reiji said:
The OEM charger is 2A for a reason. Because the tablet uses more power, it needs more current to charge at a fast pace.
Your generic 1A chargers are probably just enough to keep the tablet powered on, without draining (or charging) the battery.
If you can find a 2A universal charger, it should work just like the OEM one.
Click to expand...
Click to collapse
No, my 1A chargers are doing NOTHING at all. I plug it in and the charging icon doesn't come on. Reviews have tested these chargers at about 950ma and as I said, my 500ma Blackberry charger isn't too bad.. It's not lack of power, it's something else.
My guess is it has whatever resistor it needs to make it an "ipad" charger. And the vast majority of 2A chargers will, too.
So.. back to my original question: what do I need to do to make this charger charge my tablet? I KNOW it's possible. I just need to find the guy who can tell me how.
I also need a charger for my car, my usb power adapter in the car does not work, need to know what car charger will work as this tablet is supposed to be my car stereo replacement, sucks having to bring your stereo in to charge it and hope it lasts till you get done work
I bought the Scosche dual 10 Watt car charger, isn't here yet though. It does say it wont charge the Samsung tablets, maybe due to the proprietary cord because apparently there is a cord that works with them. It's not a specific ipad charger and does say it works with Android devices and tablets.
On a side note, what's the best way to determine what your N7 is actually charging at?
Both of my generic chargers won't work either, a 2.1A generic iPad charger, and a 1A standard USB charger. Considering it WILL charge off a 500ma USB port, it's not a current/amperage issue, it's a software/proprietary hardware issue.
b22ri22an said:
I also need a charger for my car, my usb power adapter in the car does not work, need to know what car charger will work as this tablet is supposed to be my car stereo replacement, sucks having to bring your stereo in to charge it and hope it lasts till you get done work
Click to expand...
Click to collapse
I use a verizon branded car charger to charge my N7 but I think they charge $30 for it at the vzw store.
I suggest you read this page as it may have some info to help you modify your charger:
http://www.ladyada.net/make/mintyboost/icharge.html
neilrl79 said:
I use a verizon branded car charger to charge my N7 but I think they charge $30 for it at the vzw store.
Click to expand...
Click to collapse
the cost isn't so much the issue, its the actually working part. do they have one with an angled micro usb so i can mount the tablet in the car properly or preferably a usb adapter one where i can use my own cord
For $30 you could order a handful of different ones on ebay or monoprice and find something that works. But I want a dual charger.
grim82 said:
I suggest you read this page as it may have some info to help you modify your charger:
http://www.ladyada.net/make/mintyboost/icharge.html
Click to expand...
Click to collapse
does that mean a usb adapter that is certified to work with an ipad will work for my n7
b22ri22an said:
does that mean a usb adapter that is certified to work with an ipad will work for my n7
Click to expand...
Click to collapse
I won't say 100% but I would bet the probability is very high. For the 1A charging they all seemed to play the same game with the voltage on the data lines. Not sure you'll get 2A but you'll at least get 1A.
Edit... maybe not, see this thread:
http://forum.xda-developers.com/showthread.php?t=1781680
I have a philips as351 audio dock that pushes 2A out of the micro-usb charger and the usb port on the back and neither will charge the N7. Bummer because it looks so nice on the dock to
I built a portable 2A charger for my S4 using a 8Ah 12V LiPo battery, a little Chinese DC/DC converter, some resistors on Veroboard and the female end of a short USB extension cable.
This has served me well for the past 2 years, on trains, planes, and in airports around the world, (I get 5-6 empty to full charges from one overnight charge of the LiPo) but my S6 Edge 128GB arrives next week and I'd like to take advantage of the faster charging.
The DC/DC converter is good up to 5A at 5V output, so it shouldn't be the limiting factor. The resistor configuration I used to indicate to the S4 that the charger supports 2A charging are from another XDA thread.
However, does it work the same way for the S6, and what are the resistor values?
Thanks in advance
Right, now I've received my S6 Edge, and the charger is apparently dual-voltage, so that puts my hopes of an easy upgrade to rest.
It's a bit thicker than the normal chargers and is labelled "Adaptive Fast Charging". On the specifications label, it has:
OUTPUT:
9.0V 1.67A or
5.0V 2.0 A
I guess it uses some kind of handshake to switch to 9V output, so it's no longer just a matter of the right resistors.
The good news is that it seems to charge with 2A with my standard S4 resistor configuration, so I guess I can live with that.
TurboPower charger that comes with it is the only thing that will give it a fast charge.
I have no idea how or why Quick Charge tech was left out.
Mine does indeed say "TurboPower Connected" and charges super-fast when I use the USB C Quick Charge 3.0 AUKEY Amp Type-C Dual-Port Wall Charger and the USB C Quick Charge 3.0 AUKEY Car Charger with Dual AiPower Ports. I can't seem to find it now, but I remember reading somewhere that the Moto Z does use QC 3.0, otherwise I wouldn't have bought the above products. NOTE: I am going USB-C to USB-C.
Does not use 3.0.
http://forum.xda-developers.com/z-force/help/moto-z-forces-turbopower-quickcharge-t3429607
In short QC 2.0 and 3.0 don't follow usb c spec according to a top Google engineer. According to Usb c spec the vbus voltage should not exceed 5v. QC tech exceeds this by using 9v and 12v to achieve more power. Motorola built the Moto Z according to spec which allows you to ramp up the current (amps) to achieve more power which is why our stock charger outputs at 5.7amps. You don't need QC to charge fast with Usb c. Usb c with power delivery is actually better . Either way the QC chargers put out 15 watts total. Our turbo charger does 28.5 watts using 5v at 5.7 amps and is actually faster than what's out now. QC chargers use higher voltage to achieve this at 9v 1.7 amps 15 watts, a charger doing 5v 3a does the same 15 watts. So to turbo charge your phone don't use QC chargers unless it also outputs at least 5v at 3a that's the key. Anything less than 3a won't turbo charge. It needs to be a usb C to usb C cable so the charger should have a usb C port not a usb a port like most of you are trying to use. No other charger out now does more than 3amps besides the turbo charger until then use chargers that do 5v 3a. Verizon has a fast charger that supports this and all other fast charging tech.
Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-Qualcomm-Certified-Quick-Charger-QC-3.0-33W-USB-Type-C-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
fliptwister said:
Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-...-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
Click to expand...
Click to collapse
Will these charge as fast as the stock charger out of the box? And with a USB C cable does it need to support quick charge, or do all USB C cables support quick charge as long as you have it plugged into a USB C quick charge adapter like you linked to?
Nothing charges as fast as the stock charger as far as I know.
I looked around on Amazon to try to find a spare charger with the same speed as the OEM, but there are none as far as I know. QC actually goes against usb-c standard, so whoever has a phone that supports both is technically being shorted on charge speed. I will be waiting for the verified brands (ex. Anker/Aukey) to release a legitimate charger because there have been instances where wall chargers have completely destroyed devices. For the fastest charge, you'll want usb-c cables end to end, but since usb-c is not the standard yet, I would be very careful when buying lesser-known usb-c accessories. Z owners will have to wait for the market to catch up at this point.
Total side note but I wonder if the problems Samsung is having is because of their bastardized quick charge/type setup.
I'm happy we don't have QC.
fliptwister said:
Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-Qualcomm-Certified-Quick-Charger-QC-3.0-33W-USB-Type-C-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
Click to expand...
Click to collapse
I bought the Choetech charger from amazon and it works great on my Z Force. no where near the OEM charger but still charges the phone dead to full in a little over an hour and a half. from my limited testing.
fr4nk1yn said:
Total side note but I wonder if the problems Samsung is having is because of their bastardized quick charge/type setup.
I'm happy we don't have QC.
Click to expand...
Click to collapse
Ha! I was thinking the same when I heard about battery fire from the Note 7.
I just bought another oem charger from amazon and called it a day.
squidder said:
I just bought another oem charger from amazon and called it a day.
Click to expand...
Click to collapse
But car charger?
sniperess said:
But car charger?
Click to expand...
Click to collapse
The car charger that Verizon sells turbo charges the phone, but not as quickly as the stock home charger. I don't think any charger will charge as fast as the stock home charger, since it's optimized for the phone. But the Verizon USB-C charger charges the phone plenty fast.
tgambitg said:
The car charger that Verizon sells turbo charges the phone, but not as quickly as the stock home charger. I don't think any charger will charge as fast as the stock home charger, since it's optimized for the phone. But the Verizon USB-C charger charges the phone plenty fast.
Click to expand...
Click to collapse
I can confirm this. I just got this phone on an upgrade after insisting to the Verizon sales representative that I did NOT want a Galaxy S8, that I was absolutely sure I didn't want the S8, and that I think the Z Force is a much better device than the S8. After seeing the genuine shock on his face that I slighted his phone, I bought the OtterBox case and the Verizon branded USB-C car charger with it.
The car charger definitely charges faster than my non quick charge USB-C cable, but not as fast as the stock charger. The stock charger will take me from ~5% to full in an hour. The Verizon car charger takes about an hour and twenty minutes to go from ~5% to full.
All in all, it was worth the money spent on the charger. It is definitely better than the 8 hour charge my standard USB-C usually takes.