Related
i first diiscovered this rom on this thread
http://www.droidforums.net/forum/motorola-droid-bionic/218745-jelly-bean-rom-starting-roll-out.html
Here is the download link for the rom
and here is the link for the gapps
I did not build this but i have tested it. the data does work sometimes if you play with the settings but no camera. its still a very early release created by dhacker29 and hashcode and i just wanted to share it here too.
Hmmm I think I'll stick with CM for now. Too many bugs not to notice. Maybe if the Bionic wasn't my main device.....
Looks cool, defignitly not a daily driver though.
Devices:
Samsung Galaxy S3
Asus Transformer
Motorola DroidX
Motorola Droid Bionic
Motorola Droid 1
Motorola Cliq
Please Visit www.teendroid.com
It will only run with an ICS leak in the unsafe partition?
I've been using it for about 24 hours now. Very stable, fast, smooth, and promising. Only issues I've had are the known issues of camera and data.
Sent from my XT875 using xda premium
ronaldheld said:
It will only run with an ICS leak in the unsafe partition?
Click to expand...
Click to collapse
Actually right now the CM10 is preferred to use safestrap instead of bootstrap since it's in alpha stage. I tried it with safestrap 2.0 while running .232 on safeside. Very smooth and responsive with WiFi only for data.
You might want to brush up on your bootstrap skills since the ICS leak roms will only be able to load up with it to completely run. The ICS leak roms will require a much larger partition to run on and safestrap doesn't provide it.
Hi, new to the bionic but have been flashing my x and x2 for a while. I'm on the .232 leak with safestrap 2.0 installed. I got as far as >safestrap menu>enable safe system but then a warning screen appeared saying something along the lines of "are you sure, this cannot be undone", which scared me. Obviously i would like to return to my unsafe side.
also, i have read this link http://www.droidforu...ions.html������ which says i must go to mounts and storage and format /system. however i havent seen that step anywhere else i've looked. I assumed once i got to the safe system i should just flash the cm10 zip and gapps then wipe the big three. this is preventing me from flashing cm9 as well.
in regards to the rom itself, any update on data, im in a pretty well covered 4g area. also, i use my phone as a hotspot around my apartment and was wondering if anyone could confirm the cm10 hotspot works.
thanks in advance if you can answer any or all of these questions
ronaldheld said:
It will only run with an ICS leak in the unsafe partition?
Click to expand...
Click to collapse
Yes. Be on an ICS leak, and if you use Safestrap you install it on the safe side.
nobe1976 said:
Actually right now the CM10 is preferred to use safestrap instead of bootstrap since it's in alpha stage. I tried it with safestrap 2.0 while running .232 on safeside. Very smooth and responsive with WiFi only for data.
You might want to brush up on your bootstrap skills since the ICS leak roms will only be able to load up with it to completely run. The ICS leak roms will require a much larger partition to run on and safestrap doesn't provide it.
Click to expand...
Click to collapse
Vague reply is vague and potentially FUD. If you could explain your comment about the safestrap partition size, it would likely be appreciated.
The way I understand it is that Bootstrap is required for custom ROMs based on blurry ICS. If you're flashing an AOSP/CM based custom ROM, then Safestrap is sufficient. The reason being that Safestrap stores /system inside the /preinstall partition since it's mounted on boot and the internal or external sdcards, I'm thinking, are not.
/preinstall is not large enough after the ICS leak has been flashed to store a full blur based custom ROM and the original /system
Why moto decided to mess with the partition tables is beyond me. I can only guess that they needed more room on /system because ICS is bulkier than Gingerbread and they robbed Peter to pay Paul by taking the left over space from /preinstall. Novel solution, but it causes problems with safestrap.
This remap of the partition tables would also explain why an ICS version of Safestrap and Bootstrap had to be made.
safestrapped over .232 no data and i have the screen rotation bug. still awesome though
anyone have a working link to this and maybe screen shots?
[Q] Only JB ROM ?
Hello...is this the only JB ROM available for Bionic? As always, thank you to the Devs!
Seems to be. everyone is waiting for the first FXZ Leak of JB to really get it reliable. ( dont hold your breath from what i hear).. as i understand it.
If you check out rombot.org formally droidhive sparkyman has released tormented. It's based on cm10 he is updating it frequently and he is very supportive in the thred . A lot of people are getting solid data 3g more than 4g. Its very fast and quite stable. Here's a link.
http://rombot.org/forums/index.php?/topic/1787-rom-tormented-kang/
Sent from my DROID BIONIC using xda app-developers app
FYI, this build is being revamped to use the new kexec kernel which will improve the overall experience a lot.
I'll post more details as it gets closer. Right now that build has some data issues that we're working through, and the camera is non-functional.
Hashcode said:
FYI, this build is being revamped to use the new kexec kernel which will improve the overall experience a lot.
I'll post more details as it gets closer. Right now that build has some data issues that we're working through, and the camera is non-functional.
Click to expand...
Click to collapse
Can't wait, been watching the D3 forum and very exited to see kexec coming our way. Thanks for all the hard work and time you guys put in to this.
Sent from my DROID BIONIC using xda app-developers app
Hashcode said:
FYI, this build is being revamped to use the new kexec kernel which will improve the overall experience a lot.
I'll post more details as it gets closer. Right now that build has some data issues that we're working through, and the camera is non-functional.
Click to expand...
Click to collapse
Thanks for your work. My BIONIC is waiting patiently (while I wait impatiently )
Is here on XDA where you will post it? ah well, I followed you on twitter anyway.
CYOGEN
cmoney12051 said:
i first diiscovered this rom on this thread
http://www.droidforums.net/forum/motorola-droid-bionic/218745-jelly-bean-rom-starting-roll-out.html
Here is the download link for the rom
and here is the link for the gapps
I did not build this but i have tested it. the data does work sometimes if you play with the settings but no camera. its still a very early release created by dhacker29 and hashcode and i just wanted to share it here too.
Click to expand...
Click to collapse
Does anyone have the files for the "CYOGEN 10" on dropbox or 4share?
I have always enjoyed their work, currently I am running liquid ICS v1.5 and I am very happy with it but I woulod love to give the "CYOGEN" a test drive :laugh::laugh::laugh:
Jickracer007 said:
Does anyone have the files for the "CYOGEN 10" on dropbox or 4share?
I have always enjoyed their work, currently I am running liquid ICS v1.5 and I am very happy with it but I woulod love to give the "CYOGEN" a test drive :laugh::laugh::laugh:
Click to expand...
Click to collapse
Here's a link to get it.http://romdroidhacks.com/forums/ind...tstrapall-download-links-in-op-updated-daily/
Sent from my DROID BIONIC using xda app-developers app
check out these new jelly bean roms on rombitch. its pretty good so far. no camera or hdmi yet obviously. but im getting data.
KEXEC
http://rombitch.com/donttweetmeaboutthisstuff/KEXEC-aokp_targa_jb-build-1-20120914.zip
STOCK AOKP
http://rombitch.com/donttweetmeaboutthisstuff/STOCK-aokp_targa_jb-build-1-20120914.zip
Aokp link is dead dude.
Sent from my XT875 using xda premium
FLASHING ROMS WILL VOID YOUR WARRANTY AND COULD POTENTIALLY DAMAGE YOUR PHONE -- WHILE I MAKE EVERY ATTEMPT NOT TO LET THIS HAPPEN, IT'S STILL A RISK THAT YOU'RE TAKING. IF SOMETHING BAD SHOULD HAPPEN TO YOUR PHONE, PLEASE DON'T BLAME ME -- HENCE THIS WARNING.
-Hashcode {06-21-12}
This isn't so much a ROM announcement as it is a direction to find the unofficial nightly builds of CM9 Kexec for the Droid 4.
Prerequisites:
- Rooted
- Running ICS OTA or .217 leak (they are the same)
- SafeStrap 2.11 Here's how to use Safestrap
Download SafeStrap here
SafeStrap Mirror 1 (v2.11)
Download ROM here
ROM Mirror 1 (8/20 build)
Download ICS GApps Here (04/29 build)
ICS GApps Mirror 1 (04/29 build)
FLASH THE GAPPS.ZIP FILE AFTER YOU FLASH THE ROM .ZIP
Directions:
1. Root your stock system
2. Install SafeStrap 2.10+ (for Kexec support)
3. Backup stock system
4. Toggle to SAFE system (safe to screw things up!)
5. Flash the ROM .zip like any other ROM
6. Flash the GApps .zip
7. Reboot and enjoy!
What works?
4G data and calls
Flash (HW Codecs?)
Wifi
SMS and MMS
Whats broken?
Audio while bluetooth is left on and disconnected.
Built-in wifi tether.
Camera (front and back)
USB Audio (Car Dock audio connection)
Touchscreen is finnicky.
Specs:
Kernel 3.0.31
Latest Gfx drivers from TI
CM9
Android 4.0.4 ICS
Screenshots:
Surely you have seen CM9 before?
Thread on ROMBOT.ORG (hashcode's forum)
I don't have any problems with the touchscreen, but the clock is sometimes right and sometimes wrong. On Twitter Hash says he is already working on a fix for the clock.
Very promising. Seems a bit odd to me that anyone is spending time using 3.0.x for a custom kernel; we already have 3.4 on XDAndroid and those are *winmo6* phones originally...
all the links are dead
Here is Safestrap 2.11 http://db.tt/f1xwjL86
Droid 4 - AOKP K1L0
DevilDaHusky said:
all the links are dead
Click to expand...
Click to collapse
Added links to OP.
cron666 said:
Added links to OP.
Click to expand...
Click to collapse
any way to get a list of changes with the builds/nightlies as they change since the forum is down?
azrael293 said:
any way to get a list of changes with the builds/nightlies as they change since the forum is down?
Click to expand...
Click to collapse
the forum and files are on the same host, thats where the changes and nightlies come from.
unless the host gets fixed, we have no more nightlies and no changelogs.
that is, unless there was another nightly and someone has it, then they can post it here and I'll modify OP,
or they can send me a link:
cron410 at google mail
The maserati builds are not up there yet but, rombitch.com appears to be the successor to rombot
EDIT: First cm9 kexec build is up there now!
Sent from my DROID4 using xda premium
I think that website just became my new favorite site.
In all seriousness, for how locked down the Droid 4 is, I'm very impressed how far development has come along for it. I'm very excited to see what comes down the pipe as far as CM9 and CM10 are concerned.
DarkMidnight said:
I think that website just became my new favorite site.
In all seriousness, for how locked down the Droid 4 is, I'm very impressed how far development has come along for it. I'm very excited to see what comes down the pipe as far as CM9 and CM10 are concerned.
Click to expand...
Click to collapse
Actually, Hashcode just released a new kexec build this morning, although it does not boot, it is CM10! It looks like he will be using his blog site to host future downloads. Here's a link:
http://dl.hash-of-codes.com/ROMs
rumgool said:
Actually, Hashcode just released a new kexec build this morning, although it does not boot, it is CM10! It looks like he will be using his blog site to host future downloads. Here's a link:
http://dl.hash-of-codes.com/ROMs
Click to expand...
Click to collapse
Boots fine for me. Menu, Home, Back, and Search buttons don't work though. It is a kexec build so make sure you are on the latest safestrap recovery version 2.11. Also, you'll need to flash the CM10 gapps: http://goo.im/gapps. Looks like hashcode is making some progress!
kwyrt said:
Boots fine for me. Menu, Home, Back, and Search buttons don't work though. It is a kexec build so make sure you are on the latest safestrap recovery version 2.11. Also, you'll need to flash the CM10 gapps: http://goo.im/gapps. Looks like hashcode is making some progress!
Click to expand...
Click to collapse
Awesome, I honestly did not even try it, I was just reiterating what Hashcode said on twitter. Flashing now!!!
The best thing in our current cm10 - the backlight of hardware keyboard doesn't stay turned on when you don't use it!
olegfusion said:
The best thing in our current cm10 - the backlight of hardware keyboard doesn't stay turned on when you don't use it!
Click to expand...
Click to collapse
Lol
Sent from my XT894 using Tapatalk 2
Hashcode said:
Lol
Sent from my XT894 using Tapatalk 2
Click to expand...
Click to collapse
NO laugh It's truth (for me) :laugh:
Hoping on keep once cm10 on my droid 4 as main rom
In the op it says flash doesn't work. I thought flash wasn't intended to work in jb, that adobe said no more after ics?
Personally I think flash runs great on my d4 but adobe says it doesn't so we have to listen to them since they know what we want.
Sent from my XT894 using Tapatalk 2
Button savior works to make this (kind) useful. Once the soft-buttons and camera are working, will there by anything that DOESN'T work?
This is really, really awesome
podspi said:
Button savior works to make this (kind) useful. Once the soft-buttons and camera are working, will there by anything that DOESN'T work?
This is really, really awesome
Click to expand...
Click to collapse
Just an FYI on the latest release:
Capacitive buttons are working in Hashcode's latest alpha for JB. However, data is pretty iffy. I do not get any type of data connection, so there is not much I can test at this point. Wifi does not work at all as far as I can tell.
I also assume the camera is not working, based on the fact there is no camera app.
As far as the UI is concerned, it seems pretty smooth.
Looks promising!
rumgool said:
Just an FYI on the latest release:
Capacitive buttons are working in Hashcode's latest alpha for JB. However, data is pretty iffy. I do not get any type of data connection, so there is not much I can test at this point. Wifi does not work at all as far as I can tell.
I also assume the camera is not working, based on the fact there is no camera app.
As far as the UI is concerned, it seems pretty smooth.
Looks promising!
Click to expand...
Click to collapse
wifi is because probably forgot module replacing for new kernel. I'll check this out little later
12/7/2012 update
Here is the three JB builds dhacker and hashcode are working on for the Bionic (Targa). CM10.1 is the newest ROM. Safestrap 3.05 has been added but is beta and you MUST follow the instructions or you will brick your device. I am not responsible and neither are the developers if you brick your phone. Rom development has slowed but check back to make sure you have the latest version.
If you would like me to keep this post up to date hit the "Thanks" button please. And thanks to the developers for there time and effort!
AOKP
http://goo.im/devs/Hashcode/targa/aokp
CM10
http://goo.im/devs/Hashcode/targa/cm10
CNA
http://goo.im/devs/Hashcode/targa/cna
Gapps
http://goo.im/gapps/gapps-jb-20120726-signed.zip
Don't BRICK your phone. READ THIS FIRST! / http://blog.hash-of-codes.com/how-to-safestrap
Safestrap 3.05 (Requires ICS)
http://blog.hash-of-codes.com/downloads/safestrap/
Deleted this post... carry on
ROMBot's still isn't working for me (at least nothing is showing up for targa). Cool to see kexec working though.
So I played with the threshold rom a bit tonight and its alright. I'm gonna keep an eye on the updates though cause I swapped back to .232 ICS. JB is in its infancy for the bionic but give it time and it will mature.
jetknife said:
ROMBot's still isn't working for me (at least nothing is showing up for targa). Cool to see kexec working though.
Click to expand...
Click to collapse
There was an update 9/1/12. I didn't see it at Rombot. It is however at HTTP://rombitch.com in the donttweetmeaboutthisstuff folder. And yes targa is the one to download.
zoompastu said:
There was an update 9/1/12. I didn't see it at Rombot. It is however at www.rombitch.com in the donttweetmeaboutthisstuff folder. And yes targa is the one to download.
Click to expand...
Click to collapse
Try http://rombitch.com as opposed to www.rombitch.com
linuxgator said:
Try http://rombitch.com as opposed to www.rombitch.com
Click to expand...
Click to collapse
opps.. Thats what I get for not paying attention to what I'm typing. I hit your thanks button linuxgator. My post has been edited and corrected
zoompastu said:
opps.. Thats what I get for not paying attention to what I'm typing. I hit your thanks button linuxgator. My post has been edited and corrected
Click to expand...
Click to collapse
No prob. Firefox seems to always want to add the www to it for me and it took me a while to figure out where everything went the first couple times that happened.
Which file do we need? There is like 12 files none that have targa in the name.
sent from my DROID BIONIC via XDA App
XperianceIT said:
Which file do we need? There is like 12 files none that have targa in the name.
sent from my DROID BIONIC via XDA App
Click to expand...
Click to collapse
The contents of that directory change frequently, and the targa files seem to have been removed. They are working on getting a non-kexec build of cm10 working and will then get back to the kexec builds once the codebase is stable.
Sent from my DROID BIONIC using Tapatalk 2
Hmm... would it be possible for you to share the one you used? Or is it unstable and better off to wait for better version?
Nevermind... too many links and reading and i lost where i was..... lol. I had to go back and read the op... lol
sent from my DROID BIONIC via XDA App
CM10 Mirror
Here are the flashable ZIPs if you guys want to try out Dhacker's CM10. I flashed them on the safe side of safestrap 2.0 and they worked fine, albeit without camera or data. I happened to still have them on my SDCard so here you go! This is the 07/28 nightly of CM10 with the JB Gapps zip you'll need to flash as well.
CM10 - http://db.tt/ruKelCc5
md5 - 936c19daaf1697c6e8f6e526674052aa
JB Gapps - http://db.tt/A7YQwHqO
md5 - f62cfe4a827202899919fd932d5246d7
Hope this helps satisfy the curiosity of some.
Thanks for posting the link. It has been removed from the developers site. From what I've read they want to button up there CM9 project so its finished and then they can put there full attention towards CM10. The latest Targa version was from 9-1-2012. They removed it about 6 days ago. I have it but haven't installed it yet. I don't have a way of uploading it if it works. I think data is better but still buggy in this update and so they took it down till they can get a better version out.
You can upload it with the dropbox app and link to your dropbox account for people to download. With android, there's always a way.
Sent from my DROID BIONIC using Tapatalk 2
True... If I get a chance to mess with it I will post it. Time is a bit complicated on my end right now.
umm this is like all the others .. this is not JB its a rom bases off of ICS ....hate these kinds of posts
I haven't read or seen anything that shows this being built off ICS. Google speak works. It runs way smoother then ICS even as an alpha build. Because its KEXEC it can (and does) load a JB Kernal. People please correct my if I'm wrong. this is a quote from one of the developers, Hashcoe:
Originally Posted by Hashcode
FYI, this build is being revamped to use the new kexec kernel which will improve the overall experience a lot.
I'll post more details as it gets closer. Right now that build has some data issues that we're working through, and the camera is non-functional.
Either way this needs some polishing and we need to wait for an update anyway. I am going to keep an eagle eye on this CM10 project and keep everyone up to date as things progress. Thanks to the Devs Hashcode and dhacker29!!
StankFiss said:
umm this is like all the others .. this is not JB its a rom bases off of ICS ....hate these kinds of posts
Click to expand...
Click to collapse
zoompastu said:
I haven't read or seen anything that shows this being built off ICS. Google speak works. It runs way smoother then ICS even as an alpha build. Because its KEXEC it can (and does) load a JB Kernal. People please correct my if I'm wrong. this is a quote from one of the developers, Hashcoe:
Originally Posted by Hashcode
FYI, this build is being revamped to use the new kexec kernel which will improve the overall experience a lot.
I'll post more details as it gets closer. Right now that build has some data issues that we're working through, and the camera is non-functional.
Either way this needs some polishing and we need to wait for an update anyway. I am going to keep an eagle eye on this CM10 project and keep everyone up to date as things progress. Thanks to the Devs Hashcode and dhacker29!!
Click to expand...
Click to collapse
What does it say when you go to System Settings > About Phone > Android Version?
If it's 4.0.x, then ICS; 4.1.x, JB.
It says 4.1.1
Things are getting stable!
CHANGES LOG:
[09/24] - Fixed more data bugs. It's MUCH improved.
[09/21] - Updates STOCK-base build. Added HWComposer, Camera function, fixed native cm10 wifi tether and CM10 updates
I've updated the links in my OP. I'm downloading it now. A big round of applause for dhacker29 and hashcode for their hard work on this!
Hi, I have an SGSplus (i9001) and I've been using arco68's and ivendor's CM9 ROMs for a few months now. Right now I'm using ivendor's latest RC9 plus CastagnaIT's ExtremeUV (without any OC, I'm using the standard 245-1401 MHz range) and it's fairly stable.
I always had some problems in real-time performance: it seems to me that when there is a process background the application in foreground becomes incredibly sluggish, maybe needing 10 seconds to input a single key… then, after a bit, the background process finishes his business and things go back to normal. Using BetterBatteryStats I have pinpointed a couple of bad application and removed them and now this happens rarely enough (but still happens). But this is not my question…
On Friday I decided to try ivendor's new CM10 alpha 5 and it simply doesn't boot: no "blue boy" loader at all.
I tried both the straight ROM and with the addition of CastagnaIT's kernel. I tried both with and without google apps (but I guess that doesn't matter at all, since that's userland stuff and I'm not seeing the kernel boot yet)
I put CM9 ivendor+CastagnaIT(extremeOC) back and everything is back to normal, but I'm wondering why CM10 is not booting; I think I've done it all correctly… using the new CWM 6.0.1.9 and all.
What could it be?
lap0 said:
Hi, I have an SGSplus (i9001) and I've been using arco68's and ivendor's ROMs for a few months now. Right now I'm using ivendor's latest RC9 plus CastagnaIT's ExtremeUV (without any OC, I'm using the standard 245-1401 MHz range) and it's fairly stable.
I always had some problems in real-time performance: it seems to me that when there is a process background the application in foreground becomes incredibly sluggish, maybe needing 10 seconds to input a single key… then, after a bit, the background process finishes his business and things go back to normal. Using BetterBatteryStats I have pinpointed a couple of bad application and removed them and now this happens rarely enough (but still happens). But this is not my question…
On Friday I decided to try ivendor's new CM10 alpha 5 and it simply doesn't boot: no "blue boy" loader at all.
I tried both the straight ROM and with the addition of CastagnaIT's kernel. I tried both with and without google apps (but I guess that doesn't matter at all, since that's userland stuff and I'm not seeing the kernel boot yet)
I put CM9 ivendor+CastagnaIT(extremeOC) back and everything is back to normal, but I'm wondering why CM10 is not booting; I think I've done it all correctly… using the new CWM 6.0.1.9 and all.
What could it be?
Click to expand...
Click to collapse
Dont call it blue boy his name is cid hm i flashed aokp jb in cwm 5 and all works fine try to flash cwm 5 via odin and try again because cwm 6 are buggy i think..
EDIT: first boot can take long time so be patient
Sent from my GT-I9001 using xda premium
Jonboy2011 said:
Dont call it blue boy his name is cid
Click to expand...
Click to collapse
Wops. :angel:
Jonboy2011 said:
try to flash cwm 5 via odin and try again because cwm 6 are buggy i think..
Click to expand...
Click to collapse
I tried with CWM 5.5.0.4 but it also doesn't work.
Doesn't hang on boot like it did with 6.0.1.9, but just resets back into CWM5 menu after a few seconds.
Oh, nice, it also resets back to CWM5 using the CM9 zip file which always worken with CWM6.0.1.2.
(I guess I'll use Odin to put CWM6 back and CM9 with that and be content with that)
lap0 said:
Wops. :angel:
I tried with CWM 5.5.0.4 but it also doesn't work.
Doesn't hang on boot like it did with 6.0.1.9, but just resets back into CWM5 menu after a few seconds.
Oh, nice, it also resets back to CWM5 using the CM9 zip file which always worken with CWM6.0.1.2.
(I guess I'll use Odin to put CWM6 back and CM9 with that and be content with that)
Click to expand...
Click to collapse
Hm have you try to flash aokp jb rom by crybert ? Full wipe flash full wipe and wait.. If this doesnt work your s plus is a transformer and at night a toaster sorry O-
EDIT : wait system.boots every time in.recovery without any butten pressed ?
Sent from my GT-I9001 using xda premium
Jonboy2011 said:
system.boots every time in.recovery without any butten pressed ?
Click to expand...
Click to collapse
Yep. That's what it did.
Now I've put CWM6.0.1.9 back with Odin and using that I managed to put ivendor CM9 RC5 back, so that I can put AOKP rom in the /sdcard and try it.
Whops. I guess that the changelog might explain what was happening.
2012-11-22: CM10 alpha4 [1] [2]
No changes only a working build, instead of the crappy alpha3 build
Click to expand...
Click to collapse
lap0 said:
Whops. I guess that the changelog might explain what was happening.
Click to expand...
Click to collapse
Whops oh sorry for the work with cwm :/
Sent from my GT-I9001 using xda premium
No problem.I wonder why CWM5504 didn't work for me, but oh well, newer ivendor CM10 RC5 just booted correctly, case solved!
Hey guys!
Because there aren't very many ROMs for our 4X HD, I decided to port Slim Bean from HOX! There are no problems flashing this ROM but anyhow it doesn't boot. I would really like to give you my logcat, but taking a logcat didn't work, too. Maybe there are some developers, who can help? I would really like to see Slim Bean on 4X!
DOWNLOAD:
http://www.mediafire.com/?oqcrkreeqdcerv4
If you have ideas, how to fix boot problems, please tell me what I have to do, or reupload a fixed version!!
Thanks for trying, hopefully someone can help you fix it
Sent from my rooted P880
Thxxxx
Enviado desde mi LG-P880 usando Tapatalk 2
To the op.
What kernel did you use?
Sent from my LG-P880 using Tapatalk 2
babymatteo said:
To the op.
What kernel did you use?
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
I tried with stock cm10.1 kernel and with arararagi's kernel for cm10.1
Maybe i will try it with kholks kernel
EDIT: Doesn't boot with kholks kernel, too
It might not be the kernel.
Sent from my LG-P880 using Tapatalk 2
I think there are some files argueing at boot But without logcat i can't find out which :/
Need!
Sent from my LG-P880 using xda app-developers app
I've got bootloop on my Paranoid 3.X for our LG.
It booted once when I copied nearly all files from HOX rom ( of course aprat form kernel, vendor and some others) but it was unstable and stuff. I'll relase it in a week when it's working. My advice to you is to start from copying nearly all files form HOX rom ( it's so similiar to our LG) and gradually replace needed files from CM 10.1 to fix bugs, make wifi work and stuff.
I had succesfully booted paranoid but it was not usable, had FC's all the time. And when I ported it using standard file copy scheme it gave me bootloop. I'll try to find this sweet spot and will relase it.
Keep up your work, any new roms are aprecciated.
Well, how about compiling, not porting?
One thing I have seen before is people port a ROM for quickness then build it from source while we enjoy the port. Nothing wrong with porting if its a good ROM and its done properly, would do one myself if I knew how
Sent from my rooted P880
Now that my 64 bit Arch machine is working flawless maybe I'll start digging into compiling stuff from source But I will probably fail hard (baaasiiic C/C++ knowledge) let's hope not. But I don't see any sense in making people compile from source instead of porting. If they could do this they would ! But not everyone is a real dev , so be happy with ports they provide us !
Hey nice that more people care about our device! I know it's a little bit OT but I tried to port paranoid from hox to 4X and it also hangs at boot up (bootanimation is shown) ...
I used this tutorial: http://forum.xda-developers.com/showthread.php?t=2232773
There had been no errors in cwm while installing!
I wiped data /cache partion /dalvik cache and format system before flashing....
maybe someone can help me/us
regards nbock
FD1999 said:
Sorry,
we can't tell you much about it. We need the ROM to check if you made a mistake.
From which device did you ported it? Does it has the same screen?
If not, then you need to resize every APK in the ROM or take a Paranoid ROM from a device which has the same screen.
Gesendet von meinem LG-P880 mit Tapatalk 2
Click to expand...
Click to collapse
I know, but my internet is slow, now it finished uploading! Here is the Link: https://www.box.com/files/0/f/839004648/1/f_7762315260
It's portet from HOX (same resolution also xhdpi) and it's paranoid 3.10! Both Roms are 4.2.2 (it's first cm nightly release for 4X as Base!)
HOX has also same cpu and gpu as 4X (tegra3) and so I guessed that it would be the best device to port from!
I tried to logcat while bootup, but adb don't recognize 4X HD (adb drivers uninstalled and reinstalled again!)
I wiped data factory reset /cache partion /dalvik cache and format system before flashing and data /cache after flashing...
No errors in cwm while installing...
I also tried point 8 from tutorial to copy libandroid_runtime.so to base rom and I tried to copy libandroid_servers.so and
libmedia_jni.so to base rom (thanks to tobixdev), but nothing helped - same: stuck at boot!
hope somebody can find the fault and fix it !
regards nbock