Database Develop

[Q] Failed firmare.zip flash, stuck in 4 exclamation marks

Hey all,
I've just had an failed firmware.zip flash (as said I've done this twice) now my HTC One is stuck on 4 exclamation marks screen.
Phone was a Three UK model, with stock rooted ROM (S-ON Android 4.1.2) I by mistake have tried to flash firmware.zip from extracted from my OTA update to android 4.2.2
Here's output from getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.771.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ***
(bootloader) imei: ***
(bootloader) meid: ***
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3779mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.041s
Now I'm little bit stuck, how can I recover my phone from this, whatever to stock 4.2.1 or updated 4.2.2 android?
I would appreciate any help & clues, thanks!

dgorecki said:
Hey all,
I've just had an failed firmware.zip flash (as said I've done this twice) now my HTC One is stuck on 4 exclamation marks screen.
Phone was a Three UK model, with stock rooted ROM (S-ON Android 4.1.2) I by mistake have tried to flash firmware.zip from extracted from my OTA update to android 4.2.2
Here's output from getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.771.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXX
(bootloader) imei: XXXXXXX
(bootloader) meid: XXXXXXX
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3779mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.041s
Now I'm little bit stuck, how can I recover my phone from this, whatever to stock 4.2.1 or updated 4.2.2 android?
I would appreciate any help & clues, thanks!
Click to expand...
Click to collapse
can you access the custom recovery?

OK, Topic can be deleted/closed, on 4th attempt of flashing firmware.zip, everything has end up in a success
I can't really explain more.

delete

[Q] HTC One Stock / Shipped Rom

Hey!
I have tried to flash a cstm rom to my HTC One
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH35SW910419
(bootloader) imei: 354436059075026
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4320mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.053s
C:\mini-sdk>fastboot devices
C:\mini-sdk>fastboot oem lock
< waiting for device >
^C
C:\mini-sdk>fastboot devices
C:\mini-sdk>fastboot getvar all
< waiting for device >
^C
C:\mini-sdk>fastboot devices
SH35SW910419 fastboot
C:\mini-sdk>fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) mipi display off
(bootloader) mipi_dsi_cmds_tx_ext
(bootloader) pm8921_vreg_disable function, vreg_id = 38
(bootloader) pm8921_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642044 (0x1FDDFD7C)
(bootloader) Use PSHOLD to reset device.
FAILED (status read failed (Too many links))
finished. total time: 1.139s
What should i look for to get the shipped rom to this mobil ?

This will do the job:
http://www.htc1guru.com/dld/ruu-zip...0-01_release_318486_signed_2_4_decrypted-zip/
Flash it via fastboot, if you don't know how then check some of the 'back to stock' threads
This might also help:
http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-8-zip/
Guide: http://www.htc1guru.com/downloads/stock-rom-downloads/

Thanks i'll have a look

Need help returning my HTC One M7 to completely stock!

Aright guys, i hope i can finally get this figured out.
I need to do this on my Mac and cannot do it in bootcamp because no matter what I do i cannot get my computer to recognize the device in fastboot. Tried on both windows 8 and 7.
As of right now I am running android 4.3 with sense 5 rooted that i flashed. I have a back up from when I was on 4.1.2. Hboot is 1.44.
Im trying to get this phone to a state I can send it in for repairs... I mainly need help finding the correct RUU.zip for my device and flashing it.

Haaaaaaaaaaalp
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3791mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.042s
and could a mod correct my title by adding [Q] and for Mac

[Q] Can't boot to recovery after flashing new recovery

Edit: Apparently I had to install TWRP 3 times before it would work. I'm all good now.
I wanted to try out TWRP instead of CWM, and after flashing, I can boot to fastboot, but when I try to go to recovery, I see the twrp logo for a few seconds, then it just reboots and tries do a regular boot. The regular boot fails and it tries a recovery boot, which fails and the cycle starts again.
I have been searching these forums and the wider web for an hour but am not finding anything to work. I can do SDK things but only fastboot. adb devices shows no information. fastboot getvar all fails after spitting out some information. Here's the output:
Code:
$ ./fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxx
(bootloader) imei: xxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4015mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.042s
Is there any way to recover from this? I am at wits end here, folks. Please help me out. Thank you.

Cant get my HTC one back to stock

EDIT: Fixed, please remove the thread?
Hey, Im struggling to get my HTC one back to stock (HTC will pick up the phone tomorrow so I really need to make it work today).
It's s-off, unlocked and im using the super_cid, I cant apply any RUU.exe (I get "error 158"), if I try to flash a decrypted RUU(zip) using htc_fastboot it says "error: cannot load 'RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_decrypted.ROM.zip'".
The rom im currently using is android revolution if that matters
Heres what i get when i type "fastboot getvar all"
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.43.0000
(bootloader) version-baseband: 4A.13.3227.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.20.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT36LW911649
(bootloader) imei: 354439051643858
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.057s
htc_fastboot finished. total time: 0.140s
Im sorry if this question has been asked already, ive tried a lot of stuffs and none of them worked so far.
Thanks , Antonio.

antonioroot said:
Hey, Im struggling to get my HTC one back to stock (HTC will pick up the phone tomorrow so I really need to make it work today).
It's s-off, unlocked and im using the super_cid, I cant apply any RUU.exe (I get "error 158"), if I try to flash a decrypted RUU(zip) using htc_fastboot it says "error: cannot load 'RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_decrypted.ROM.zip'".
The rom im currently using is android revolution if that matters
Heres what i get when i type "fastboot getvar all"
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.43.0000
(bootloader) version-baseband: 4A.13.3227.06
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.20.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4318mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.057s
htc_fastboot finished. total time: 0.140s
Im sorry if this question has been asked already, ive tried a lot of stuffs and none of them worked so far.
Thanks , Antonio.
Click to expand...
Click to collapse
First, what was the original CID ?

alray said:
First, what was the original CID ?
Click to expand...
Click to collapse
I got it to work again using the GURU_Reset, thanks. Can a mod lock this?