Related
Last night I power cycled my phone and put it on my charger. When I woke up this morning and looked at my phone there were a ton of force close screens. I have no phone (cannot make calls) and not data.
I power cycled the phone over and over and have been searching the net all day but cannot get it to work. The only thing that I had done prior to the initial power cycle was a few updates from the market, so I uninstalled those apps, but it appears that was not the problem.
I have root access and was running gumbo's rom (now MaDoCo...thought that would help) and I really don't wanna do a factory reset. Is there anything I can do?
Factory reset is most likely gonna be your only option. If you dont wanna do that, do you still have the .zip for your rom on your mem card? If so, why not just reflash the zip? Might take care of the issue without having to do a hard reset. I am assumingm, though, that if you are rooted you would have created a nandroid backup? Why not just restore?
Tried reflashing the rom and that didn't work. Gonna do a Factory reset now. Lets see
tried factory reset and now i'm stuck on boot screen
Did you ever make a Nandroid backup?? I would suggest you run the Sprint RUU and bring your phone back to Stock, reroot, install recovery, and then a custom ROM. That looks like your best option.
But, just for the hell of it -- take out of your battery and then insert it back in and reboot, see if that does anything.
What kind of factory reset did you do? Wipe from recovery, go through setting, the home>back>power one, or what? And are you stuck at the HTC screen? That happened to me once, but it was because I flashed a GSM rom my first try. Boot into recovery, wipe the phone, and if that doenst do it, I agree with pseodo, time to RUU.
Well I tried resetting from the recovery and wiping, but it will not boot up. Then I tried the RUU, but it wont get past the boot screen in order for me to to connect it to the USB. I tried connecting the USB through recovery and although I can access my SD card via my PC, going through the steps for the RUU says its not connected.
I took my phone over to sprint and although they know I have a custom rom on there (which voided my warranty), they are still gonna give me a brand new one and send mine back through manufacture warranty. It'll be in on Tuesday. Luckily for me I have an online back up through by MyBackUpPro, so I should be good on restoring settings, apps, contacts and all other important stuff. (Minus Root and Custom Rom )
Thanks for all the suggestions, I appreciate it.
I flashed a new set of icons last week and had a bunch of force closes, restored a nandroid and everything was fine.
I'm new to this whole flashing custom ROMS business. I have a CDMA HTC Hero 2000 and I downgraded to the original 2.1 before the update just fine, rooted my phone just fine. Then I tried to flash Aloysius to it using instructions I found here: [Complete Guide] How To Flash A Custom ROM To Your Android Phone With ROM Manager + Full Backup & Restore | Android News, Reviews, Applications, Games, Phones, Devices, Tips, Mods, Videos, Podcasts - Android Police
After all was said and done, my phone starts to boot with the "HTC quitely brilliant" logo, following by "SPRINT the Now network" logo and after it shows "Now" for many seconds (as it normally does before pulling up the home screen), it reverts back to the HTC logo and repeats this process until I remove the battery.
I removed the microSD and attempted to boot, same thing. Then I held down HOME+BACK+POWER to do a manual hard reset, this took a little longer but again had the same result.
I may just cry now. Please help!!
Run the official sprint ruu, and see what that does for u. Then read the rooting guide here on xda and try it. I personally recommend amon ra recovery to flash roms, rom manger never seemed to work right. Feel free to pm for more help, dont worry u prob arent bricked unless u flashed a gsm rom (which aloysius isn't)
Sent from my HERO200 using XDA App
That's a bootloop not a brick You could try downloading a different rom and flashing it in recovery, nandroid restoring - if you made one, or flashing the same rom again. just wipe your phone before (data/cache/dalvik)
Didn't get a chance to get on here until now but I fixed it last night.
I did this by going back into reboot recovery mode (by pressing HOME and POWER), going to partition settings, COMPLETELY wiping everything on the sd card, mounting the USB and dragging a new ROM .zip file onto it. (I tired this twice without completely wiping and the phone continued to have problems booting.
The flash worked fine that time and all has been well. Turns out the first one I was trying to apply to it was just an upgrade.
Thanks everyone for your help, makes perfect sense now.
chrisdegraw said:
Didn't get a chance to get on here until now but I fixed it last night.
I did this by going back into reboot recovery mode (by pressing HOME and POWER), going to partition settings, COMPLETELY wiping everything on the sd card, mounting the USB and dragging a new ROM .zip file onto it. (I tired this twice without completely wiping and the phone continued to have problems booting.
The flash worked fine that time and all has been well. Turns out the first one I was trying to apply to it was just an upgrade.
Thanks everyone for your help, makes perfect sense now.
Click to expand...
Click to collapse
Four key words to remember when trying out any new rom
Nandroid is your friend!
additionally, you should always remember to wipe before loading a new rom!
Enjoy!
Yeah, don't ever panic, that was, as everyone said, a bootloop by textbook definition. I've never seen a brick before, but I'm damn sure it won't get as far as the Sprint logo. The only way to brick a CDMA Hero is to flash a GSM Radio/Bootloader to it.
I apologize in advance if this same issue has been replied to elsewhere. I'm in kind of a unique situation and couldn't find an answer anywhere.
I'm got an N1 with 2.3.6 stock ROM, rooted. Recently I downloaded Titanium Backup PRO and while attempting to integrate dalvik cache to ROM, my phone rebooted into a bootloop. I'm assuming this is a bootloop. I get the colorful splash screen, it freezes for a second of two, then continues on, and on, and on....
Is there a way to get me out of this loopwithout having to wipe all my data, so I can backup all my stuff before I flash a custom ROM?
Everything I see about bootloops, mentions unlocking the bootloader and wiping all your data. I've seen downgrading using PASSIMG and loading stock rom. I'd really just like a simple way to get out of this loop hell and get my phone back up. It's in teh ship now getting it's power button fixed.
Thanks in advance
first thing i do on bootloops is pull battery
if no go pull battery and then pwr on by pressing pwr and trackball at same time--you can then get to recovery and maybe wipe dalvik and cache and reboot
i have never used TB for anything other than backup/restores, so can't help with dalvik integration
You might be able to fix it by wiping your cache from recovery.
Sent from my Nexus One using xda premium
Thanks for the advice! I'll give it a try as soon as I get my phone back from being fixed.
Hey guys, I hope you can help. I got my phone back with new power button, Yay! When I try to boot into recovery, teh Nexus X logo comes on for a moment and then I get a white triangle with an orange exclamation point. Do I need to use ADB to try and go to recovery and wipe my cache? I've never installed a recovery image. Do I need to do that or should there be a stock image already on my phone? Am I SOL?
One more thing that might help. I notice that when I go into HBOOT, the phone searching for 4 images from my SD card and can't find them. They go by too fast to write them all down but I think some are PASSIMG, PASSDIAG, etc. Again, do I need to load a recovery like clockworkmod on my phone first and then go into recovery to attempt to wipe my cache?
I get the same passimg all the time--no problem
If your phone came back from repair, you are probably unrooted and hence the triangle. At least that is the way I remember it, but has been two years since I rooted
If that is comfirmed by someone else, you wil need to reroot and install a recovery
A good time, if you haven't, to install android sdk and root/install recovery the right way and have full adb/fastboot features
there other ways I am not familiar with
does the lock show unlocked on the screen, they could have relocked bootloader
the wiki has the instructions, just have to navigate to the htc smartphones and N1
jus to make sure that if u still got root. install su checker app from play store and confirm.
if not root using SUPER ONE CLICK ROOT.
flash recovery (4EXT is good) www.4ext.net
do a backup and then flash the rom u want
Sent from my Nexus One using Tapatalk
Thanks I'll check. I only had teh power button fixed and not by HTC so I doubt they unrooted it. I'm still in a bootloop but I can use superoneclick still, so I'll give that a try.
so what I'm trying to do is wipe my cache without wiping my data. I don't think my bootloader is unlocked. Am I screwed?I'm in a bootloop, so I can 't install anything to the phone. I probably could put a recovery image on the SD card, but if my bootloader is locked, I'm guessing that won't work. I'm rooted. When I go to HBOOT, the phone looks for passim files and doesn't find them, then when I choose recovery I get the white triangle. I've try to flash a recovery image through ADB but I get an error, failed to load image. Again, is that a bootloader issue?
I'm almost at the point of just wiping my data and hoping I can get it all back somehow.
holtonhj said:
so what I'm trying to do is wipe my cache without wiping my data. I don't think my bootloader is unlocked. Am I screwed?I'm in a bootloop, so I can 't install anything to the phone. I probably could put a recovery image on the SD card, but if my bootloader is locked, I'm guessing that won't work. I'm rooted. When I go to HBOOT, the phone looks for passim files and doesn't find them, then when I choose recovery I get the white triangle. I've try to flash a recovery image through ADB but I get an error, failed to load image. Again, is that a bootloader issue?
I'm almost at the point of just wiping my data and hoping I can get it all back somehow.
Click to expand...
Click to collapse
You really know nothing huh. The triangle is the recovery. Press power button and volume up at the same time, it will the show you some options like wipe cache.
n1newbie said:
jus to make sure that if u still got root. install su checker app from play store and confirm.
if not root using SUPER ONE CLICK ROOT.
flash recovery (4EXT is good) www.4ext.net
do a backup and then flash the rom u want
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
Did you miss the "stuck in boot loop" part?
sorry,
meant that the triangle is your stock recovery--
you install recovery thru fastboot not adb
i would still, if you haven't, install android sdk on pc-unlock bootloader (fastboot oem unlock) and fastboot recovery--all in wiki
i think it was mentioned--holding down pwr and tb will get you into fastboot mode--phone connected and usb debugging selected on phone
you'll just have more flexibility with flashing roms etc and getting out of trouble
Very noobish issue. Rooted, unlocked bootloader on Atrix HD. Set up SafeStrap as recovery. Everything checked and working. After letting SafeStrap install Cyan 10.3 and rebooting, phone entered CyanogenMod boot screen and become stuck for an hour. Realized that I forgot to reset and wipe all stock settings and cache (yes, I know that should have been obvious step). Figured I could just go into SafeStrap and make the quick fix.
Seems that I'm unable to enter my custom recovery, instead I'm lead to the familiar bricked android stock recovery. No options to access stock rom (assuming it was deleted during install or lost, etc). Tried installing a different recovery, but fastboot on PC is unable to find device. Help at this point is very much appreciated, either to do any of the following:
1. Somehow access SafeStrap again (assuming that it wasn't wiped aswell) so I can clear stock settings and cache, get Cyan 10.3 going properly.
2. Instructions/links to another method to otherwise forcibly delete stock settings and cache (please keep in mind, fastboot is currently unable to find device).
3. Otherwise completely clear phone of EVERYTHING, then reinstal stock recovery and or/stock ROM so I can give up on flashing custom and stick with stock.
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Update Motorola drivers on your computer and check threads for fastboot files from skeevydude.
Sent from my MB886 using XDA Premium 4 mobile app
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
http://forum.xda-developers.com/showthread.php?t=2226527
Sent from my MB886 using XDA Premium 4 mobile app
SkunkID said:
*Update:
Was finally able to get phone into AP Fastboot Flahsh Mode. My computer itself can't see the phone, but device manager shows it as "Fastboot QINARA S" and I'm able get a response through my PC's end of flashboot.
Tried using RSD lite to install a stock ROM, but no success since the phone isn't off and can't be turned off without trying to go into another Boot Loop. Also tried installing a new recovery through fastboot, but I keep getting the response, "(Bootloader) variable not supported."
At this point, I'd be really happy if I could get the proper commands to wipe and factory reset my phone while in fastboot. At least then I'd have Cyan. I could try installing stock if it continued to glitch.
Click to expand...
Click to collapse
The error is from using the wrong fastboot executable. Look at post 5. If you get a stickybit error, search our general forums for "stickybit" and you'll find that fix.
deeje00 said:
Well safestrap is for use with locked bootloaders so there lies your problem. Maybe you can make a factory cable or buy one to put your phone into fastboot so you can flash stock through rsd.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
With a bit of creativitity one could use SSR to dual boot Holo Blur and Batakang....or two custom 4.3's that use the same kernel....PAC + Carbon both with arrrghhh's kernel.....Only problem is ya can't be a noob at all if ya do it.
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
When you're at the "dead Android" screen pressing Vol Down + Power pushes it into recovery, iirc - might seem random but there's a purpose behind it.
SkunkID said:
Solved issue...somehow.
Used method shown in link below to install stock recovery image since Safety Strap was apparently deleted/wiped/banished?
(can't link, still noob poster. Just search, "[Guide] How to flash back to Stock Rom - chacha. Please Sticky This !", should be the first result.)
After installing stock recovery, was able to go to the standard dead android screen, but after punching the volume buttons randomly, the option menu for stock recovery opened. Was able to factory reset and wipe cache, then properly reboot. Cyanogenmod finally got out of it's BootLoop, and everything seems to be running fine. Flashed a non-official CWM (no offical CWM or Twrp avaliable for Atric HD) and got Gapps. Phone is finally running fine.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Lingering issues worth mentioning incase there are obvious fixes.
.Cyan likes to crash whenever running programs for the first time or doing do much activity in a short amount of time (I suspect the cache has something to do with the cleared cache since revisiting apps doesn't cause crashes as often). If it persists, I'll probably just back up and look for a more stable rom.
.All notification lights are white, except the battery notification lights, despite me changing the colors and/or allowing apps to use their own light settings.
Click to expand...
Click to collapse
Hi, I am having the same issue you had... how the heck were you able to get back into stock recovery? Every time I try my phone just reboots and gets stuck again. I cant even turn off my phone with out it rebooting. I have read your posts and followed that other forum you mentioned but if I cannot boot into recovery and if my computer cant see my phone it wont work. Please help when you get a chance.
Rooted, Bootloader unlocked, TWRP installed, Xposed Running. 5.0 - I did not yet update or press update ever, If I have ever accidentally allowed it to begin downloading I kill the download by deleting the file using SDMaid.
I got home, had problems with other devices, phone was on about 40% at this point. I remember hearing the phone reboot, I noticed it went into TWRP, which was strange, I restarted system > powered up > lockscreen > restart to twrp with no interaction. Phone is now getting low 21%ish. Fix permissions - because used to be the all out fix on my other devices.
Same thing again > straight into twrp.
I notice that some scripts have been ran in the twrp console. Something along the lines of Victara_en_US.zip Some red scripts I assume saying failed to update.
I assume the phone is now too low to power up.
It shows no sign of charging since leaving the last twrp reboot.
Green light in top speaker shows when attempting to power up with usb charger plugged in > nothing else happens.
With charger unplugged from phone I see my modified logo screen and the moto planet spinning before phone turns off completely. This process now repeats.
Anyone have any idea what the hell is wrong with my phone?
EDIT UPDATE:
Managed to get into the fastboot menu:
Battery Low (RED)
Device is UNLOCKED status code 3 (YELLOW)
Software status modified (YELLOW)
As normal aside from Battery...
THE-M1GHTY-BUKO said:
EDIT UPDATE:
Managed to get into the fastboot menu:
Battery Low (RED)
Device is UNLOCKED status code 3 (YELLOW)
Software status modified (YELLOW)
As normal aside from Battery...
Click to expand...
Click to collapse
Get your phone into TWRP and connect it to your charger and let it charge to at least 70% Use Advanced Wipe in TWRP, select Cache and wipe that. Then see if your phone will start normally. Somehow you have downloaded the update file and it is trying to run automatically. Since your phone is modified, the update fails (and nothing is updated or changed.) The update file is in /cache so wiping that should correct the problem. You should go ahead and update to the Stagefright patched version of your ROM so you aren't having to deny the factory update all the time.
mikeoswego said:
Get your phone into TWRP and connect it to your charger and let it charge to at least 70% Use Advanced Wipe in TWRP, select Cache and wipe that. Then see if your phone will start normally. Somehow you have downloaded the update file and it is trying to run automatically. Since your phone is modified, the update fails (and nothing is updated or changed.) The update file is in /cache so wiping that should correct the problem. You should go ahead and update to the Stagefright patched version of your ROM so you aren't having to deny the factory update all the time.
Click to expand...
Click to collapse
Attempting this now....
Phone still boots to a black screen. I don't understand why it would download the update let alone attempt to install it, I religiously deny the update. Also why would it have booted up normally then forced itself into TWRP? :S
What can I next? I dont mind wiping using fastboot as I managed to take all my files off the phone via twrp.
This happened to me a couple times but wiping the cache AND the dalvik cache fixed it. If it still doesn't work, I hope you have a backup because you are going to have to wipe the system and data next. Sometimes these updates like to link themselves to all the phone's partitions, and in that case you should wipe everything and restore your full system and data backup in recovery.
TyNote3Krill said:
This happened to me a couple times but wiping the cache AND the dalvik cache fixed it. If it still doesn't work, I hope you have a backup because you are going to have to wipe the system and data next. Sometimes these updates like to link themselves to all the phone's partitions, and in that case you should wipe everything and restore your full system and data backup in recovery.
Click to expand...
Click to collapse
I wiped both the first time I tried it :-/
I don't have a system backup as a far as I am aware, need to check main pc for something like that. I had a lot of trouble with no signal after changing my phone to x1095 so I could root it etc. Just hope I don't have the same trouble again. Can i reinstall the system through twrp? Or do I need to flash via fastboot?
Whats my best option, system files wise, for fixing this?
THE-M1GHTY-BUKO said:
I wiped both the first time I tried it :-/
I don't have a system backup as a far as I am aware, need to check main pc for something like that. I had a lot of trouble with no signal after changing my phone to x1095 so I could root it etc. Just hope I don't have the same trouble again. Can i reinstall the system through twrp? Or do I need to flash via fastboot?
Whats my best option, system files wise, for fixing this?
Click to expand...
Click to collapse
If you dont have a backup, at this point, I don't see any other options besides formatting your data or flashing the stock firmware. Of course, don't just take my word for it, but in the future just make sure you have a working backup available.
TyNote3Krill said:
If you dont have a backup, at this point, I don't see any other options besides formatting your data or flashing the stock firmware. Of course, don't just take my word for it, but in the future just make sure you have a working backup available.
Click to expand...
Click to collapse
Am I able to flash anything other than the stock 5.0? Last I checked I had converted whatever I had to the x1095. I remember everything being easier on other phones...
Yes, you can, just make sure you have the right file for the job. They are usually about 2 gigs, and they take forever to flash. Note that once you flash the file, your phone will be as if you just bought it from the store, but it always will boot if you have the corresponding build.
THE-M1GHTY-BUKO said:
Attempting this now....
Phone still boots to a black screen. I don't understand why it would download the update let alone attempt to install it, I religiously deny the update. Also why would it have booted up normally then forced itself into TWRP? :S
What can I next? I dont mind wiping using fastboot as I managed to take all my files off the phone via twrp.
Click to expand...
Click to collapse
In TWRP, make a backup now even though it may not be useful depending on what the problem is. Then, use advanced wipe in TWRP and wipe data. If the phone will boot now, something got corrupted in data and you'll just need to set your phone up again. If the problem continues, you'll have to flash your system image. How to do this varies with the model of your phone; some models have TWRP images, others need to use fastboot files. After you flash the new system image, you can either just continue to clean setup the phone, or you can try to restore only data from the backup you made previously.
TyNote3Krill said:
Yes, you can, just make sure you have the right file for the job. They are usually about 2 gigs, and they take forever to flash. Note that once you flash the file, your phone will be as if you just bought it from the store, but it always will boot if you have the corresponding build.
Click to expand...
Click to collapse
Does that include 5.1 roms? I can never seem to find x1095 5.1 roms, or anything for that matter, they are all titled with every other version.
mikeoswego said:
In TWRP, make a backup now even though it may not be useful depending on what the problem is. Then, use advanced wipe in TWRP and wipe data. If the phone will boot now, something got corrupted in data and you'll just need to set your phone up again. If the problem continues, you'll have to flash your system image. How to do this varies with the model of your phone; some models have TWRP images, others need to use fastboot files. After you flash the new system image, you can either just continue to clean setup the phone, or you can try to restore only data from the backup you made previously.
Click to expand...
Click to collapse
I tried wiping data to no avail.
Im trying to download stock 5.0 for now but the download is taking decades for some reason. Do you, or anyone else, recommend any roms which I can easily flash without having to worry about modem files?
THE-M1GHTY-BUKO said:
Does that include 5.1 roms? I can never seem to find x1095 5.1 roms, or anything for that matter, they are all titled with every other version.
Click to expand...
Click to collapse
Hopefully this could provide more information for your situation?
http://forum.xda-developers.com/moto-x-2014/development/rom-xt1095-flashable-stock-rom-t3185945
Thank you for your help, as well as anyone else who helped me. I now have a running phone on 5.1.
How do I gain root from here? My superuser app updated and now tells me I have no binary, despite telling me to flash something only 5 minutes prior.
Sent from my XT1095 using XDA Free mobile app
So you don't have root? I would suggest rooting using towelroot. Go online and search "towelroot" click on the first result, click on the lambda to download the apk, and install it. You can then open the app, and press "make it ra1n" to root your device without any reboot needed.
I had root prior to wiping and installing the 5.1 update that was linked to me. Towelroot gives me the phone not supported message.
Sent from my XT1095 using XDA Free mobile app
Towel root does not work in 5.1.
To root just flash TWRP. Start TWRP. When you exit TWRP it will ask you if you want to root it. Simple.
Sent from my XT1095 using Tapatalk
I'm still in the "phone not responding" phase.. how did you manage to get in the bootloader from there? Tnx!
I found a chainfire autoroot IMG that rooted my phone. Found xposed too. I'm back at a fully working phone now, thank you to all who helped me.
Gotta say, the battery life on 5.1 is a hell of a lot better.
Sent from my XT1095 using XDA Free mobile app
As in you can't get it to fastboot?
I left it to charge for a while, then took about 5 minutes attempting the power button volume button combo to restart and get it into fastboot.
I believe that it's something like:
Power + vol down until the phone screen flashes/green light goes off
Then
Still holding the power and volume down
Hold the vol up too
Then release the power still holding the vol up and down.
That's what worked for me. It's literally the most awkward phone I've had go button combos.
I think vol up from powered off works too.
If you mess up just hold the power and vol down again.
Sent from my XT1095 using XDA Free mobile app