Database Develop

Is my OMNIA dead ?

Hi Guys,
I have a Samsung Omnia that won't boot anymore.
First I see the Omnia logo followed by the red vodafone screen. After that the phone just reboots again and again and again.
The phone was just standing on the table doing nothing, suddenly the phone went of and keeps rebooting.
Is there anything I can try to do to fix it ?
Tnx in advance

At least on this site yes...
de.schurk said:
Hi Guys,
I have a Samsung Omnia that won't boot anymore.
First I see the Omnia logo followed by the red vodafone screen. After that the phone just reboots again and again and again.
The phone was just standing on the table doing nothing, suddenly the phone went of and keeps rebooting.
Is there anything I can try to do to fix it ?
Tnx in advance
Click to expand...
Click to collapse
There is a thread on this section called "Omnia official thread" perhaps you can ask there.
Remember this is an HTC ONLY FORUM so not too much support will be found
Anyway good luck,

Try here :
forum.gsmhosting.com
You'll find a lot of stuff .
If your phone is not absolutely dead , you might be able to revive it .

OK, thanks anyway !

de.schurk said:
OK, thanks anyway !
Click to expand...
Click to collapse
Your phone is bricked. Search in gsmhosting forum for member ELCO- he can help you. Also somewhere saw cables for flashing i900 with NsPro.

[Q] G1 stuck at "G1 T-Mobile" Startup screen. How to fix?

Hello,
Tryed to find similar threads, but found none with the correct answer.
When i tryed to unroot/unflash my phone back to stock something went wrong.
Now when i try to turn my phone on i can only see this "G1 t-Mobile" loadingscreen and nothing else happens.
Ive tryed booting with Home+Power, with Camera+Power and a normal booth, nothing works. Replaced the SD-card with an other one (1GB), first formatted FAT32style, didnt work. Afterwards i put the DREAIMG.nbh file on it and tryed it, but still didnt work. Im all out of options.
Can someone please help?

hoipupe said:
Hello,
Tryed to find similar threads, but found none with the correct answer.
When i tryed to unroot/unflash my phone back to stock something went wrong.
Now when i try to turn my phone on i can only see this "G1 t-Mobile" loadingscreen and nothing else happens.
Ive tryed booting with Home+Power, with Camera+Power and a normal booth, nothing works. Replaced the SD-card with an other one (1GB), first formatted FAT32style, didnt work. Afterwards i put the DREAIMG.nbh file on it and tryed it, but still didnt work. Im all out of options.
Can someone please help?
Click to expand...
Click to collapse
I'm afraid you have a hard bricked phone. Only way out is to jtag it.
http://forum.xda-developers.com/showthread.php?t=591048

i have the same problem in my g1 mobile he is dead now please help me

Did you try going to the Root screen? If you can't go to the root screen, then it might be Bricked, I'm not sure though.
Sent from my T-Mobile G1 using XDA App

I have tryed every button combination possible, and none of them worked
So there is no other way to fix this unless i need to adjust the hardware?

hoipupe said:
I have tryed every button combination possible, and none of them worked
So there is no other way to fix this unless i need to adjust the hardware?
Click to expand...
Click to collapse
I'll simply refer you back to post number 2.

shadowch31 said:
I'll simply refer you back to post number 2.
Click to expand...
Click to collapse
Yes, and thank you for that.
Though, im afraid i'm not competent enough to "JTAG" it as i dont understand 50% of the stuff being said in that post
Also i read you need some equipment like a JTAG Adapter, which i dont have..

hoipupe said:
Yes, and thank you for that.
Though, im afraid i'm not competent enough to "JTAG" it as i dont understand 50% of the stuff being said in that post
Also i read you need some equipment like a JTAG Adapter, which i dont have..
Click to expand...
Click to collapse
Your best bet would be to see if anyone in your area/country who can do it for you probably at a lot cheaper cost than buying a new phone.

nexus one "radio v2 - fail-pu" help needed

Hi all,
I need help to install any rom or something else with my nexus one.
I have attached picture.
When I starting the device I get 7 vibrations but I can see the fastboot screen.
I have tried to put passdiag file on the sd card and this is what I can get.
i have AT&T device with AMOLED
and also S-ON (so i cannt run adb).
Thanks Yaron.

You meant PASSIMG and not PASSDIAG. But it doesn't matter much. Unfortunately, your Nexus One is dead.
"Fail-PU" means "Failed Partition Update", which means - your NAND chip died and can't be recovered. Since it died on Radio partition, you can't do anything with it.
Time to move to a better phone, I guess.

Exact problem.. very precise
Jack_R1 said:
You meant PASSIMG and not PASSDIAG. But it doesn't matter much. Unfortunately, your Nexus One is dead.
"Fail-PU" means "Failed Partition Update", which means - your NAND chip died and can't be recovered. Since it died on Radio partition, you can't do anything with it.
Time to move to a better phone, I guess.
Click to expand...
Click to collapse
yrone said:
Hi all,
I need help to install any rom or something else with my nexus one.
I have attached picture.
When I starting the device I get 7 vibrations but I can see the fastboot screen.
I have tried to put passdiag file on the sd card and this is what I can get.
i have AT&T device with AMOLED
and also S-ON (so i cannt run adb).
Thanks Yaron.
Click to expand...
Click to collapse
same problem all hboot radio versions are same as well... very exact .. did you solve it yet.. if so can you tell me how to solve it.. i can actually get into fastboot.. thats all i can say now.. can you help me solve ths problm..
and my nexus one stuck with boot screen..

And I thought my reply explains the situation very well...
Read it again, several times, until you understand the meaning of "dead phone".

Jack_R1 said:
And I thought my reply explains the situation very well...
Read it again, several times, until you understand the meaning of "dead phone".
Click to expand...
Click to collapse
yea i understood. still i can just change that logic board by buying some old used working parts from ebay.
i think that will work.. :laugh: :cyclops:

Yes, you can, of course. But this is the main board with the CPU, it might cost almost as much as a complete N1.

[Q] First boot taking forever .

Hi,I'm a newbie to modding and I think I'm stucked.
Dumb I was I deleted my backup ,and I'm flashing from my micro SD ,because I can't acces my internal storage anymore.
Whatever I tried (slimkat,CM11,or omni) on my galaxy tab 2 (p3110) it takes forever when I do the first boot .
Please help .

You should pull it battery boot into recovery and try flashing again or connect to PC and see if adb or PC finds device
Sent from my ZTE_N9511 using XDA Free mobile app

TheHelplessGuy said:
Hi,I'm a newbie to modding and I think I'm stucked.
Dumb I was I deleted my backup ,and I'm flashing from my micro SD ,because I can't acces my internal storage anymore.
Whatever I tried (slimkat,CM11,or omni) on my galaxy tab 2 (p3110) it takes forever when I do the first boot .
Please help .
Click to expand...
Click to collapse
umm ????galaxy tab 2 ????? I think your in the wrong forum, this is the HTC One M7 forum, and if you got those rom's from here, im not surprised they are failing, they are not for your device in any way, shape or form, stop flashing now, you will seriously break your device beyond repair.
you need to be here: http://forum.xda-developers.com/galaxy-tab-2

Happened to me before. Just flashed stock kernel and worked again.
Sent from my ZTE_N9511 using XDA Free mobile app

Seanie280672 said:
umm ????galaxy tab 2 ????? I think your in the wrong forum, this is the HTC One M7 forum, and if you got those rom's from here, im not surprised they are failing, they are not for your device in any way, shape or form, stop flashing now, you will seriously break your device beyond repair.
you need to be here: http://forum.xda-developers.com/galaxy-tab-2
Click to expand...
Click to collapse
sorry for that error,
but my roms are official for my device ,they are not from here

Insert an SD card before using the Camera

After flashing a CM 13 rom even though my SD card is perfectly alright im receiving this type of error when i open Camera. i cant even click pictures or video. Even when i open Gallery its saying that " SD card is full or No SD card".
Please someone respond and help me, its really pissing me off. :crying:
Thank you in advance

i have the same problem pls help

I have a solution
BelalElbeik said:
i have the same problem pls help
Click to expand...
Click to collapse
What OS are you using ?

Abhignu said:
What OS are you using ?
Click to expand...
Click to collapse
Sorry I left the website for quite a while, it's Android... that problem appeared suddenly while testing roms etc, anyways I fixed it...I literally tried every solution I found available on the internet and somehow one of them worked xD...TBH it's pain to fix, took from me 9 hours of trying, so if u can buy new phone it's better for u 0x0

same problem
I have the same problem, I posted here:
https://forum.xda-developers.com/moto-g/help/insert-sd-card-using-camera-t3680962