I'm @ .67 and it lags to screen off when I put phone to face during a call and it never does during bt connected. I use bt while my phone is in my pocket so you can imagine rest. I use a motorcycle so no other option than bt. Any help?
Sent from my C5502 using Tapatalk
Lasantha said:
I'm @ .67 and it lags to screen off when I put phone to face during a call and it never does during bt connected. I use bt while my phone is in my pocket so you can imagine rest. I use a motorcycle so no other option than bt. Any help?
Sent from my C5502 using Tapatalk
Click to expand...
Click to collapse
it's normal that the phone screen is off during calls using the handset (w/o headset) bcs of the proximity sensor to avoid accidentally touches.?
Related
Hey just tried connecting to my Blue ant supertooth light hands free.
it paired Ok but I have two problems when using it.
1. the hands free wont auot answer & i cant find if there is a setting on the diamond to set this.
2. when i receive a call as sson as i press the answer key it disconnects the phone from the hands free.
any ideas?
thanks
Peter
I had the same issue with other Win mobiles too. Maybe some issue with the windows to bluetooth?
I suspect so, but no one else has mentioned it in other posts
can anyone shed some light?
I don't have this issue at all, I am using Sony Stereo headsets right now.
The biggest issue for me right now is...after I finished using bluetooth, the phone will be muted until I soft reset. And this is relaly annoying!
sunnycheng said:
I don't have this issue at all, I am using Sony Stereo headsets right now.
The biggest issue for me right now is...after I finished using bluetooth, the phone will be muted until I soft reset. And this is relaly annoying!
Click to expand...
Click to collapse
No problems here pairing it with my car. Maybe a soft-reset can help?
Yea I'm having this issue with the Motorola i710 headset....only mine disconnects after about 4 minutes into a call....same other issues
I'm having problems too with Bluetooth headset/hands free... I'm using Dell BH200 headset which does stero wireless and hand free calling... When I dial numbers I can hear throught the headset, music plays fine through the headset, however it seems as soon as the phone connects/it goes into sleep it drops the headset and the small ear speaker in the handset works... Its annoying... I'm going to test with platronics hands free tomorrow...
Also, when I make a call, like a few seconds after it connects the phone's screen turns off... I thought it was only supposed to do this when you bring it up to your ear i.e. when light sensor in the ear speaker detects little light..?
sunnycheng said:
I don't have this issue at all, I am using Sony Stereo headsets right now.
The biggest issue for me right now is...after I finished using bluetooth, the phone will be muted until I soft reset. And this is relaly annoying!
Click to expand...
Click to collapse
I think I solved the problem with muting the phone after using bluetooth: using TF3d configuration tool I disabled the music tab. Now i use wm player for music and, during 1 day ,I had no problem - my phone is not going to mute anymore.Please try this method and post here the result. A lot of Diamond users have this problem and is few topics o the forum related to this.
I'm very happy with my Z so far, I'm having to wait for my micro sim to activate, but that's not the phones fault.
However, the vibration seems to be causing a high pitched buzzing, like a piece of paper vibrating. I thought my X10 vibrated aggressively, but even in mid air my Z creates a loud buzz.
I noticed it the first time I pressed the home key and initially thought it may be the screen protector (that matt finish was actually nice to use :/) but even with both the front and back protector gone it's still there.
I guess this is mainly an issue because I never have the ringtone on, just vibrate, and vibrate for Gmail and this Tapatalk too. So if the vibration is faulty I think I'll unfortunately have to get a replacement as I don't want it dieing in a month.
Hopefully I'm being stupid and it's some software thing but I don't think so as it's coming directly from the bottom and not the speaker to the right.
Any feedback on your devices and what you think is wrong with mine (or not wrong if this buzz is normal :/) would be appreciated
Sent from my C6603 using Tapatalk 2
Yes it's strong.
Sometimes I jump at night from my bed, just because the phone start buzzing on table.
What about when it's not on a table though? Mine sounds like there is a label or piece on the paper left behind inside the device :/
I just want to make sure it's not faulty
Sent from my C6603 using Tapatalk 2
This vibrator is "louder than stronger" , as in all thin phones.
Set vibration strength to max, and write on keyboard very fast. It'll start to sound like a broken shaver
Where would I find the option to change vibration strength?
Sent from my Xperia Z using Tapatalk
Kallb123 said:
Where would I find the option to change vibration strength?
Sent from my Xperia Z using Tapatalk
Click to expand...
Click to collapse
Settings -> language and input -> xperia keyboard -> sound and vibrate -> vibration intensity
Sent from my C6603 using xda app-developers app
AW: Vibration causing buzzing noise
huball said:
It'll start to sound like a broken shaver
Click to expand...
Click to collapse
Made my day, still giggling like a retard
Yes, the vibrator is quite well audible. As pointed out already, part of this is due to the slimness of the device.
Seriously.. I think the system can't control the vibrator well.
Even with moderate vibration, it is not accurate when you type fast on the keyboard. At time it vibrates longer than it should... and that's messed up!
The noise is definitely there.. sounding like a fly stuck each time it vibrates.
I do like this phone.. but each day, the flaws make me think otherwise.. Oh well..
Anyone notice the vibration is missing in action in few places when in Stamina mode?
LiveSquare said:
Anyone notice the vibration is missing in action in few places when in Stamina mode?
Click to expand...
Click to collapse
Ye, I've been thinking it's very hit and miss. Sometimes the navigation bar gives you a vibrate and other times not...
Sent from my Xperia Z using Tapatalk
AW: Vibration causing buzzing noise
huball said:
Settings -> language and input -> xperia keyboard -> sound and vibrate -> vibration intensity
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Is there a way to set the vibration strength for incoming calls / mails / etc? The RC car sound of the vibrator is driving me nuts...
Sent from my C6603 using xda app-developers app
I white-listed Smart Connect to deactivate-reactivate mobile data and toggle between vibration mode and normal, all of this from 11.30 pm to 6.20am.
Now, Smart Connect vibrates when an event occurs... it's so strong I don't even need an alarm anymore to wake me up.
My first device had this problem along with noise from the speaker while in a call. The second one got neither! The vibrator is still strong but much less noisy and the speaker and loud speaker are loud without the distortion :-\
reptile64 said:
My first device had this problem along with noise from the speaker while in a call. The second one got neither! The vibrator is still strong but much less noisy and the speaker and loud speaker are loud without the distortion :-\
Click to expand...
Click to collapse
I think I'll have to get a replacement :/ the buzz seems far too loud.
But not only that, I think, as I pointed out at the start of this thread, the vibrator is actually faulty abd doesn't vibrate for all texts. I can be fairly sure it's a hardware issue as even running the vibration test in the service menu doesn't always result in a vibration.
Sent from my C6603 using Tapatalk 2
My sony z3 compact was dead after being used under water for seconds. I took off the sim card and sdcard, and dried it. I drown it into a sack of rice for 3 days. After that, its still not working but keeps on buzzing for so long time, even I charge it or not. It keeps on buzzing but could not turn on. Somebody help me, or advice me for what happened to my phone. I want to retrieve it.
I was on omar's rom and suddently i realized that when i connect my headset the music was still playing by the speakers and I couldn't make it work until i reboot my phone with the headset connected..but the speakers didn't work even if i disconnect the headsets..so I decided to flash the stock rom via rsdlite..but my problem isn't fixed Any idea?
You simply might have dust inside. I have that from time to time. Try with a wooden toothpick, the phone turned upside down, to carefully take out the dust of the headphone hole.
patoberli said:
You simply might have dust inside. I have that from time to time. Try with a wooden toothpick, the phone turned upside down, to carefully take out the dust of the headphone hole.
Click to expand...
Click to collapse
no, it is a hardware or a software problem..my phone is one month old only
Oh ok, then it might be an issue with the ROM But there I can't help you any further.
antkalaitzakis96 said:
I was on omar's rom and suddently i realized that when i connect my headset the music was still playing by the speakers and I couldn't make it work until i reboot my phone with the headset connected..but the speakers didn't work even if i disconnect the headsets..so I decided to flash the stock rom via rsdlite..but my problem isn't fixed Any idea?
Click to expand...
Click to collapse
Try another player
Sent from my XT890 using XDA Premium 4 mobile app
I'm already looked for 3 days all over the internet and can't seem to find the fix.
Issue:
AT&T Note 3 + 2013 BMW X5 paired and happy for 6+ months using BME bluetooth and headset no problems. Phone paired, bluetooth always connects, all functions (phone, messages, music etc all work).
Early March, noticed that when connected to BMW, as soon as screen dims during call, both the bluetooth connection and headset icon stay active but the phone drops into handset (ie phone's own speaker/mic) and although bluetooth remains connected and headset icon on, the sound is now via phone. Touch phone and screen lights up, everything is fine again until screen dims, then repeat fiasco.
Can't find offending issue or setting. Could have been an app or app update.
So, to fix, flashed car into latest BMW updated firmware.
Tried again, same issue.
Then update phone to KitKat.
Tried again, same issue.
Yes, the proximity sensors are off and yes phone is set to not dim when on call. Still does.
Can't figure out why this is happening. Seems to happen quicker with Powersaving Mode on.
Any ideas??
I am now resorting to trying some of the Apps that keep screen lit while app is running....
Phone is OEM (ie not rooted) stock AT&T GN3. Also, previously, the phone would sit on passenger seat or console without any proximity settings and do just fine until this started happened. I suspect it is some kind of app or update that has caused the phone to behave like this. The problem is the phone.
TIA
Same issue with my Honda Accord, paired with bluetooth, phone will become unresponsive for 2-5 min when playing music, but then I formatted the phone and since then no issues.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
I am on stock never been rooted and suddenly when i am listening to a music from my phone only the right ear produces sounds but the left doesnt i tried to reboot it but it does not fixed the problem . I never submerge my phone in to a water never tested it . What seems to be the problem ?? Plsss help me thx
Sent from my C6903 using xda premium
Plug them to other phone or PC and check if both are working, if not then you gotta use your warranty.
Perhaps it's your earphones that are spoilt? :silly: