Related
Dear Guru's...
I've flashed the SGS, with JS3 from samfirmware & odin...
Everything looks fine until reboot...
The phone keeps vibrating and do have the following error in recovery mode : 'Update media Can't mount dbdata..."
Conclusion it doesn't boot at all...
Any clues on how to solve that ?
ManyMany Thanks!
can u get recovery mode working ? if so try wipe cache and factory reset.
azzledazzle said:
can u get recovery mode working ? if so try wipe cache and factory reset.
Click to expand...
Click to collapse
Recovery is working, But i do have the error here : " Your storage is not prepared yet etc etc etc.."
And download mode also working...
Is there any rom that I can put ?
if you can get download mode working you can flash another ROM thru Odin, start of on a stock ROM then work your way back to a custom ROM if thats what u want.
http://forum.xda-developers.com/showthread.php?t=846913
I've got the same problem. Phone boots in both download and Recovery mode, but it cannot access internal SD since it was formatted in Ext4 by the lagfix (yes, I forgot to bring it back before using Odin).
Is there any way to solve this without sending the phone to Samsung?
azzledazzle said:
if you can get download mode working you can flash another ROM thru Odin, start of on a stock ROM then work your way back to a custom ROM if thats what u want.
http://forum.xda-developers.com/showthread.php?t=846913
Click to expand...
Click to collapse
The thing is " I use a stock rom from samfirmware...."...
flashing back to stock rom should remove the ext4 lagfix. did for me anyway.
link for stock firmware is in post above ^^^^
flash it again, and do re partition
azzledazzle said:
flash it again, and do re partition
Click to expand...
Click to collapse
Did that !
I'll try to do it with csc and modem file...
what is reset EFS Phone ?
I probably solved. I'm going to make a FULL flash to JPU with three files and PIT, then I'll upgrade to JS3, then will swith to a custom ROM.
This should work
sorry my mistake i assumed you already had 3 files and pit ... yeah that should work
dont tick EFS just the re partition and auto reboot f. reset time
matticala said:
I probably solved. I'm going to make a FULL flash to JPU with three files and PIT, then I'll upgrade to JS3, then will swith to a custom ROM.
This should work
Click to expand...
Click to collapse
I'll also try the 3 files method...
keep posted... download takes time !
Indeed solved
HOORAY !!!! i bet your heart was pumping out your chest lol
azzledazzle said:
HOORAY !!!! i bet your heart was pumping out your chest lol
Click to expand...
Click to collapse
Do you have any idea the CSC to you for last JS3 ?
should be included with the firmware u downloaded ??
azzledazzle said:
should be included with the firmware u downloaded ??
Click to expand...
Click to collapse
tHERE IS JUST ONE TAR FILE???
you can flash with just one file. jus put the .tar file into the PDA part of odin. and thats all u need to do. no pit no csc no nothing just PDA
Reboot problems also
Hi! I was just wondering is this method going to work even I have custom rom (Darkys extreme edition 9.0.2) installed ?
Only asking because something went terribly wrong, and phone just keeps rebooting all the time. So with odin + I9000XXJPY (stock firmware) everything goes back to normal? and after that I can start all over to see what went wrong
isokissa said:
Hi! I was just wondering is this method going to work even I have custom rom (Darkys extreme edition 9.0.2) installed ?
Only asking because something went terribly wrong, and phone just keeps rebooting all the time. So with odin + I9000XXJPY (stock firmware) everything goes back to normal? and after that I can start all over to see what went wrong
Click to expand...
Click to collapse
Edit: all worked no worries anymore
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!
Hello buddies,
I was using my DarkyModded SGS i9K and all of a sudden my phone's lock screen got freezed and i tried it shutting down but i wont recognize ,then i had removed my battery and rebooted it.Now the problem comes !!
It wont Reboot i.e It's stuck on Galaxy S -powered by Darky ROM screen !
i tried with odin to reflash it back to stock,Reinstall Darkymod, Stock Froyo but no luck!!
but it booted into Stock 2.3.x and was booting very very slow @ 1FPS of sgs animation ,so i accessed the recovery but it was also too slow even it was taking the input after a sec , i wiped it and still no booting up and one more thing my phone displayed once the BSOD logo and now my sgs can go into download mode also but cant reboot after flashing with odin ,ezodin!!
I would be grateful if anybody snapped me out of this crap !
Thankyou!
If you can get into download mode, then flash stock with Odin, 2.2 is a good option, was for me anyway. Hope this helps.
Which odin roms have you tried?
knowledge is Power. Guard it well.
snapper.fishes said:
Which odin roms have you tried?
knowledge is Power. Guard it well.
Click to expand...
Click to collapse
EZodin 2.2 (Preroot+CWM3),Odin used for DarkyROM,Odin for Gingerbread ROM!
still no luck in booting !!
If you can get recovery, go to mount and storage then format everything. Then flash bootloader with ezboot and after that a stock rom with odin. It's just a try...maybe you're luck and it works
Sent from my GT-I9000 using XDA App
Drollo85 said:
If you can get recovery, go to mount and storage then format everything. Then flash bootloader with ezboot and after that a stock rom with odin. It's just a try...maybe you're luck and it works
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i was actually using stock recovery v3e and when i try to hit wipe-factory reset it says E:copy_dbdata_media:Can't unmount "/dbdata"
E:Format_volume failed to unmount "/dbdata"
now im goin to try heimdall for Cm7 maybe i got some luck in there!!
what is this problem ??
even the heimdall didn't gave me a hand!
didn't get it!!
:/
i've even tried this !!
http://forum.xda-developers.com/showthread.php?t=984140
still no boot!!
f*ck!
Sounds to me that u are going to have to format the system via recovery, and then flash stock 2.2 with Odin
bigmadpete said:
Sounds to me that u are going to have to format the system via recovery, and then flash stock 2.2 with Odin
Click to expand...
Click to collapse
can u give me a small instruction set to go through that method!
Ashtrix said:
can u give me a small instruction set to go through that method!
Click to expand...
Click to collapse
When flashing with Odin have you done a repartition?
Yep!
tried all possible ways!
:/
Re-format system, boot into recovery and go...mounts and storage-format system. Im no expert and please do this with caution and at your own risk. After format you will need to flash to 2.2 or something safe.
Already tried it says errors can't be formatted unable to unmount "/dbdata"!!
:/
please help me!!
:/
1st of all buy a jig, it will give you download mode and reset the counters. Have you maybe got a corrupt internal sd card ? See when this happened to me I flashed stock via Odin, then I rooted and got clockwork recovery and formated ststem, then a custom rom. Are you seeing recovery and download mode, or are you seeing a pc and triangle with a cross.
bigmadpete said:
1st of all buy a jig, it will give you download mode and reset the counters. Have you maybe got a corrupt internal sd card ? See when this happened to me I flashed stock via Odin, then I rooted and got clockwork recovery and formated ststem, then a custom rom. Are you seeing recovery and download mode, or are you seeing a pc and triangle with a cross.
Click to expand...
Click to collapse
Yep, i can go through the recovery and all but stuck in a bootloop !!
AFTER EZODIN3 rooted 2.2 or 2.3.4 Official...!!!
and when i try to format it gives the errors!!!
Why "EzOdin" whats wrong with Odin ?
bigmadpete said:
Why "EzOdin" whats wrong with Odin ?
Click to expand...
Click to collapse
Umm..so, if i get Odin 2.2 official then can i fix up my bootloader bootloop problem?
Yeah it helped me out, also pit files caused me problems in the past, my advice is get Odin v1.82 and froyo 2.2. Try it without the pit, just use Pda Phone and CSC. If it doesnt work try with the pit. Make sure the files are in correct boxes. Let me know friend
Hi,
First of all I'm pretty new to this forum and really don't know this is correct thread to post this or not. This forum is kinda huge
Here is my problem,
I have Samsung Galaxy S GL-I9000. After 6-7 months of use suddenly it got very slow and throwing error on installed application could not able to start (Force Close) randomly.
So I decided to do factory reset. I tried to format internal 16GB SD card, it was showing done but i could see the 4.3 GB occupied there. I factory reset option from the menu (forgot where) and it did not solve the problem.
I also tried to clear the Cache and Partition by 3-button combinations, again no use and decided to flash the ROM with available ROM.
I looked into XDA and found one and flashed it, but after flashing it is showing the samsung glowing logo and thats all, nothing is coming up.
I have Odin, Heimdall and bought the jig as well.
Please help me to make my phone in working condition. Any good ROM is fine for me don't need any fancy stuff right now.
Thanks in advance
Sudipta
you in something that calls BOOTLOOP you can fix it with the ODIN
tray to flush the STOCK ROM with the ODIN again
I tried to flash several times, and last 2 times I flashed with Phone EFS clear, Phone Boot Loader Update and Re-partition option selected.
Don't have any idea what else could be tried there. Can you please be specific?
Try clearing data, cache and dalvik and then flash this:
http://forum.xda-developers.com/showthread.php?t=1117579
Thanks for your reply. Can you please tell me how to clear delvik?
I think data and cache can be cleared by going into reset screen by pressing 3-button combination.
Thanks in advance
Download stock rom for your phone from sammobile.
Then download odin for the phone again with pit file. It should have 512 pit file.
Now copy eveything on your internal sd card into a file on your pc.
Once done open odin, select pit512, and the three files of your stock rom ( phone, pda, csc) and check repartition. Make sure kies is not running. Now put phone into download mode and connect to usb, once phone connected to odin click start.
If still in bootloop try a second flash with same rom. This time don't check repartition and don't select the pit file. Select only phone, pda & csc.
If the stock rom you download only has one file put pit512 in pit and then file into pda although i think it is preferable to have the three file stock rom if possible.
Alternatively search for darkyrom resurrection in google and follow tutorial and downloads from the resurrection thread. That way the download has everything you need and darkyrom is a great custom stock rom
Sent from my GT-P7500 using xda premium
Jw5 rom from samfirmware is the latest.extract on your PC.password is samfirmware.com
Odin is very sensitive.so follow these steps
1. close kies
2.open odin
3.set files in Odin
4.turn phone off.remove battery,put it back in,use 3 button combo to get into download mode and connect phone to your PC.
5.wait for the Odin to recognize your phone(3-5 sec) and flash
6.don't remove phone until it is fully rebooted.this can up to 10 min.
And Done
Remember always to flash with full battery(100%)
sudipta29 said:
I tried to flash several times, and last 2 times I flashed with Phone EFS clear, Phone Boot Loader Update and Re-partition option selected.
Don't have any idea what else could be tried there. Can you please be specific?
Click to expand...
Click to collapse
did go to the recovery mod and did WIPE DATA and WIPE CACHE?
Thank you guys for replying, i will follow all the steps and keep you posted.
Also I think STOCK ROMs from samfirmware is not free. But i will check that if i can get.
@IceCreamBoris - Yes i did cleared the data and cache before flashing.
sudipta29 said:
Thanks for your reply. Can you please tell me how to clear delvik?
I think data and cache can be cleared by going into reset screen by pressing 3-button combination.
Thanks in advance
Click to expand...
Click to collapse
never mind about the Dalvik; don't listen to me, i wasn't thinking straight when i posted.
Listen to zodiaxe66 and scubadude.
Sammobile is free you just need to register but it is free
Sent from my GT-P7500 using Tapatalk 2
Well sammobile can be a pain. Try googleing stock Roms for I9000 and find different downloads. Find a rom with sbl at the end of it. And put the files in there spots in Odin. You can put the pit and repartition if you want but its not a must. Good luck
Sent from my GT-I9000 using XDA
Hi,
So, I got a Samsung Galaxy TAB 8.9 (GT-7300) WiFi+3G. Nordic/European version. I have a long history of rooting and running custom ROM's on my Android devices, but this time i f##ed up a bit.
1. Installed root_original.zip from this thread by copying it on to the tablet and applying it from stock recovery.
2. Booted and installed Superuser and ROM Manager from Market.
3. Used ROM Manager to install CWM for Galaxy Tab 10.1 (Yes, I know...).
4. Tab would not boot, but I could still get in to download mode. Browsed some XDA threads and came across this guy who seemed to have the same problem. I did not see that he had a P7310 (WiFi only) tablet. So, I used Odin 1.85 to install the bootloader, which was for the P7310, not for P-7300. Now, the tablet boots but the display is just flickering, like it is using a wrong refresh rate or wrong resolution. Not at all possible to read anything, but I can still get into Download mode.
5. Installed stock rom from here, specifically this one: P7300XWLA2------2012 January----P7300NEELA1-----Nordic countries----
Still no luck. The tablet boots into Android but the display is still flickering.
$20 for anyone who gets me out of this mess
Can you come in recovery ?
Than try this?
http://forum.xda-developers.com/showthread.php?t=1519564
There is an option in CWM under the mount and storage tab where stands mount usb connection click on that and move this to your tab after that install it
I hope it will work!
You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Oh and btw, my advice is for free.
Hi safariking,
I can get in to recovery, but I'm unable to read anything, as the display is just flickering. I would need a press-by-press guide in order to perform the steps correctly... :/
Thanks kallt_kaffe, I'll try the swedish firmware and follow the guide step-by-step
kallt_kaffe said:
You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Click to expand...
Click to collapse
Installs correctly but does not fix my display problem.
kallt_kaffe said:
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
Click to expand...
Click to collapse
I followed the guide step-by-step. No errors occured during flashing.
kallt_kaffe said:
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Click to expand...
Click to collapse
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
kallt_kaffe said:
Oh and btw, my advice is for free.
Click to expand...
Click to collapse
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
snubbel said:
Installs correctly but does not fix my display problem.
I followed the guide step-by-step. No errors occured during flashing.
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
Wooow that looks not good man i think you must return it back to samsung
you can run a logcat maybe
snubbel said:
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
If you turn it off and charge it, is the charging-mode-display also distorted?
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to General
kallt_kaffe said:
If you turn it off and charge it, is the charging-mode-display also distorted?
Click to expand...
Click to collapse
If I turn it off it automatically turns back on and boots Android. So I can't see if the "charging while turned off" icon is also distorted.
kallt_kaffe said:
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.
Click to expand...
Click to collapse
I left it in download mode last night, it's still turned on. I'll let the battery drain and see what happens when I connect the charger.
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?
snubbel said:
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?
Click to expand...
Click to collapse
I honestly do not know.
Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
nirogu325 said:
Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.
Click to expand...
Click to collapse
Re-partitioning with the PIT file along with the ROM did not help :/
suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?
snubbel said:
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?
Click to expand...
Click to collapse
As long as you have the right drivers installed, no. That's my setup.
I had a similar issue. It occured only when I turned display off and on, both in android and in battery charging mode while powered off. I just went back to the store and got it replaced. xD
Anyway the flickering began to show up after flashing 3.2 back from a 4.0 rom... So I think there was something wrong with the bootloader.. Didnt find any tar file containing the original bootloader.. Perhaps someone here can make it for you
hey,
i got same problem after i tried to install cm9. now i cant install nothing (i formated cash, data, system and preload) no data factory reset working. i have nonstop bootloops and format cache and dalvik not working but cwm ist starting but not working really. but can start download mode too ... so i think its not a super-brick for my gt 7300 from switzerland.
so, i will try to download from samMobile the original firmware and to flash with odin. anybody knows a tutorial with odin for gt 7300? cant find nothing for pit, csc, tar ...
please help me
thx sophie from switzerland
suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
I have to say, I was about to send the tablet to samsung, it was dead, no rom, no boot, no partition, no USB connection to store, what save me was the Odin up load that you recommended me, the tablet was really crashed.
I Think that is a sollution for actually almost any problem on the tablet (a complete format, sure, but still a good solution for ROM problems).
anyway, Many Thanks!!!!!!
Newbie try to help.
Have you try to install another CMW version using odin? Maybe it's caused by wrong CMW version. Try CMW v5.5.0.4 here http://forum.xda-developers.com/showthread.php?t=1312218