How can i remove CWM from my phone Galaxy S Advance
miju71 said:
How can i remove CWM from my phone Galaxy S Advance
Click to expand...
Click to collapse
How did you install it? Flashing CoCore? Recovery is Kernel related, so if you want TWRP, just flash the TWRP-Version of CoCore. If you want Stock Recovery, flash the Stock Kernel.
SebastianM89 said:
How did you install it? Flashing CoCore? Recovery is Kernel related, so if you want TWRP, just flash the TWRP-Version of CoCore. If you want Stock Recovery, flash the Stock Kernel.
Click to expand...
Click to collapse
I had rooted my device and installed cwm then i unrooted it but device is now custom so how can i go back to legal version?
miju71 said:
I had rooted my device and installed cwm then i unrooted it but device is now custom so how can i go back to legal version?
Click to expand...
Click to collapse
Flash stock firmware with Odin.
shut_down said:
Flash stock firmware with Odin.
Click to expand...
Click to collapse
when i go into Recovery mode the device doesnt get added. What steps do i have to do
miju71 said:
when i go into Recovery mode the device doesnt get added. What steps do i have to do
Click to expand...
Click to collapse
To go to Downlad mode, not to Recovery. And install USB drivers for phone (if you was not, here).
Related
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Pantherx12 said:
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Click to expand...
Click to collapse
Which kernel are you on ?
Just flash a stock cm10.1 kernel & reboot to recovery. Then flash whatever you want.
Pantherx12 said:
Hello there, having trouble flashing roms with trwp 2.3.4 getting error 7.
So I was wondering how do I get into the bootloader or ADB mode when I only have access to twrp?
Want to flash Clockworkmod or a newer version of trwp but can't .
Very frustrating, any help would be greatly appreciated.
Click to expand...
Click to collapse
The note is unique as this is all built into the kernel... So flash a new kernel you get a recovery with it... Don't push anything with Adb...if you must use PC Odin
Sent from my Samsung Galaxy SV using Tapatalk 3
warfareonly said:
Which kernel are you on ?
Just flash a stock cm10.1 kernel & reboot to recovery. Then flash whatever you want.
Click to expand...
Click to collapse
asf58967 said:
The note is unique as this is all built into the kernel... So flash a new kernel you get a recovery with it... Don't push anything with Adb...if you must use PC Odin
Sent from my Samsung Galaxy SV using Tapatalk 3
Click to expand...
Click to collapse
Think I'm on hydracore at the moment, that's what I tried over odin anyway.
Thing is I'm getting efs mount errors when I try and flash my previous rom (alliance v3)
Thanks though, i'll try flashing some different kernel.
Wooo, seems flashing hydracore from odin failed, manually flashing hydracore worked a charm on CWM 6 now and just flashed without any errors.
Thank you very much chaps!
(Although Rom won't boot, is there any additional steps to flashing roms with the note, don't have to do any boot.img stuff right?
Pantherx12 said:
Think I'm on hydracore at the moment, that's what I tried over odin anyway.
Thing is I'm getting efs mount errors when I try and flash my previous rom (alliance v3)
Thanks though, i'll try flashing some different kernel.
Wooo, seems flashing hydracore from odin failed, manually flashing hydracore worked a charm on CWM 6 now and just flashed without any errors.
Thank you very much chaps!
(Although Rom won't boot, is there any additional steps to flashing roms with the note, don't have to do any boot.img stuff right?
Click to expand...
Click to collapse
Did you wipe ? Make sure you're on safe kernel.
I had the same !
When you want to flash sth, just uncheck that two thing above "slide to flash"
Hi guys,
Is there an Odin flashable recovery for i9000?
Thank you
Sent from my GT-I9505
You need to get your phone on the latest stock with root & CWM?
DumF0rGaming said:
You need to get your phone on the latest stock with root & CWM?
Click to expand...
Click to collapse
No, basically I wanted to start TOTALLY fresh with a new ROM so I went to CWM and formatted EVERYTHING!! I was half asleep when I did it and formatted my SD card (where my ROM was saved lol) I also formatted boot, so I have no recovery anymore either.
What I'm wanting is a custom recovery I can flash using Odin.
So CWM recovery in a .tar format.
Thanks for the help!
Obagleyfreer said:
What I'm wanting is a custom recovery I can flash using Odin.
So CWM recovery in a .tar format.Thanks for the help!
Click to expand...
Click to collapse
So attached one may help you a lot. It works even for JW9! All you need to do - it's install the latest stock ROM first
DumF0rGaming said:
So attached one may help you a lot. It works even for JW9! All you need to do - it's install the latest stock ROM first
Click to expand...
Click to collapse
But this isn't a recovery is it?
It's just a root package for stock firmware?
All I'm looking for is a custom recovery (like CWM) that I can flash in Odin so I can get a recovery back on my phone and flash CM
This on contains Root+CWM3 for stock ROM
Hello,
I have the Samsung N7000, but it is stuck on Odin too.
My phone is not bricked or something like it, but I want Clockworkmod recovery 6.0.4.5 on it so I can flash Cyanogenmod 11 KitKat on it.
It is stuck on NAND WRITE too. I already have Clockworkmod recovery 6.0.2.8 on it, so I need to upgrade it.
Any suggestions??
Best regards, Joey
Moved to a new thread in Note Q&A
JoeyLohstroh said:
Hello,
I have the Samsung N7000, but it is stuck on Odin too.
My phone is not bricked or something like it, but I want Clockworkmod recovery 6.0.4.5 on it so I can flash Cyanogenmod 11 KitKat on it.
It is stuck on NAND WRITE too. I already have Clockworkmod recovery 6.0.2.8 on it, so I need to upgrade it.
Any suggestions??
Best regards, Joey
Click to expand...
Click to collapse
You have not mentioned the file you were trying to flash.. No mind readers here...
Anyways, flash raw kernel from the current recovery and reboot recovery.
nokiamodeln91 said:
You have not mentioned the file you were trying to flash.. No mind readers here...
Anyways, flash raw kernel from the current recovery and reboot recovery.
Click to expand...
Click to collapse
Sorry, I tried flashing Clockworkmod 6.0.4.5 tar.md5 file.
It ran till it said NAND WRITE START and than FAIL. The collor above turned red and instead of PASS it said FAIL!
So raw kernel should fix this?
Do you have a link maybe? I'll search for it on Google but I want to make sure I have the good file.
Edit*
I found what you told me, but it says that raw kernel is for Android 4.4?
http://forum.xda-developers.com/showthread.php?t=2397000
I have 4.1.2 so I'm not sure if this will brick my device or something like that.
My device is all working fine and it is not bricked or bootloop YET, and since it has that NAND WRITE fail I'm not sure if it will reinstall my stock rom.. if it may brick.
I will still say what I wrote above.. Flash raw r4..reboot recovery and flash kk rom.
nokiamodeln91 said:
I will still say what I wrote above.. Flash raw r4..reboot recovery and flash kk rom.
Click to expand...
Click to collapse
Allright, but I don't need to upgrade my cwm then? Because on several websites are telling me that I need at least Philz touch CWM 6.0.4.3 on it..
JoeyLohstroh said:
Allright, but I don't need to upgrade my cwm then? Because on several websites are telling me that I need at least Philz touch CWM 6.0.4.3 on it..
Click to expand...
Click to collapse
1. To flash a kitkat rom you will need a recent Cwm recovery.
2. Philz tw kernel are not updated to latest cwms.
3. If you try to flash philz_touch_xxx.zip, it won't work as you already saw.
So if you want to root the phone, use philz tw kernel that is associated with a rom build number like XXLTA.. Then you will get Cwm but not recent enough flash kk. That's why you flash raw r4.reboot into recovery takes to to recent Cwm. From there you can flash kk..
Just note that r4 is for 4.3 and will not boot a 4.1.2 so you will need to flash kk after r4.
nokiamodeln91 said:
1. To flash a kitkat rom you will need a recent Cwm recovery.
2. Philz tw kernel are not updated to latest cwms.
3. If you try to flash philz_touch_xxx.zip, it won't work as you already saw.
So if you want to root the phone, use philz tw kernel that is associated with a rom build number like XXLTA.. Then you will get Cwm but not recent enough flash kk. That's why you flash raw r4.reboot into recovery takes to to recent Cwm. From there you can flash kk..
Just note that r4 is for 4.3 and will not boot a 4.1.2 so you will need to flash kk after r4.
Click to expand...
Click to collapse
Aah like that. But I think that I need Raw kernel R5 than? Because KitKat is Android 4.4
And when I flash raw kernel, than I should be able of flashing newest Cwm?
JoeyLohstroh said:
Aah like that. But I think that I need Raw kernel R5 than? Because KitKat is Android 4.4
And when I flash raw kernel, than I should be able of flashing newest Cwm?
Click to expand...
Click to collapse
Hi,
Is not possible to flash recovery without kernel, on recent samsung phones recovery and kernel are tied. (Maybe you can change recovery editing the kernel image but that is out of subject and maybe your skills).
Follow the steps @nokiamodeln91 suggest you, there is no other way. Raw Kernel has a KK compatible recovery.
llawarta said:
Hi,
Is not possible to flash recovery without kernel, on recent samsung phones recovery and kernel are tied. (Maybe you can change recovery editing the kernel image but that is out of subject and maybe your skills).
Follow the steps @nokiamodeln91 suggest you, there is no other way. Raw Kernel has a KK compatible recovery.
Click to expand...
Click to collapse
Okay. But if KitKat doesn't work that well, do I need to downgrade my Kernel and Cwm recovery than?
And do you have a link to the stock kernel?
Then you go into recovery, wipe data, and flash anew rom using odin or use recovery to flash a custom rom.
nokiamodeln91 said:
Then you go into recovery, wipe data, and flash anew rom using odin or use recovery to flash a custom rom.
Click to expand...
Click to collapse
But do you know/have a link to the stock kernel?
Just in case..
JoeyLohstroh said:
But do you know/have a link to the stock kernel?
Just in case..
Click to expand...
Click to collapse
No, and what will you do with the stock kernel?
nokiamodeln91 said:
No, and what will you do with the stock kernel?
Click to expand...
Click to collapse
If cwm doesn't want to instal KitKat, because of some reason, or I decide to not install it, than I want to reboot 4.1.2 but because of the Raw Kernel that won't be possible.
JoeyLohstroh said:
If cwm doesn't want to instal KitKat, because of some reason, or I decide to not install it, than I want to reboot 4.1.2 but because of the Raw Kernel that won't be possible.
Click to expand...
Click to collapse
LOL that does not make any sense.. You will need to restore the backup or install a new rom. There is no need to separately install a stock kernel.. May be you need to read more how all this works.
nokiamodeln91 said:
LOL that does not make any sense.. You will need to restore the backup or install a new rom. There is no need to separately install a stock kernel.. May be you need to read more how all this works.
Click to expand...
Click to collapse
Well, I didn't know that you sometimes need another kernel before you can install cwm.
I have been installing custom roms en recoverys many times on LG's so that isn't the problem.
But the NAND WRITE and FAIL problem must be a kernel issue than?
Hey guys!
my s3 mini i8190 is stuck on "Samsung Galaxy SIII Mini I8190" in infinite restart!
it's not reaching the samsung logo at all
it happened after i flashed cm11 novafusion 4.4.2 but i got no network (using maclaw twrp)
so i tried carbon but it was the same problem (no network)
so i flashed stock rom 4.1.2 (using odin) that's when this problem occured
plz if anyone has a clue on what this problem might be
Can u go into recovery mode?
o0VIP0o said:
Can u go into recovery mode?
Click to expand...
Click to collapse
thanks for responding!
yes i can go into recovery and download mode too
i tried to wipe cache and factory reset
but still the same
flash custom recovery and reflash rom from recovery
Gw|n said:
flash custom recovery and reflash rom from recovery
Click to expand...
Click to collapse
i tried that
i flashed cwm and twrp both from stock recovery and through odin
it always goes back to stock recovery
warezhafid14 said:
i tried that
i flashed cwm and twrp both from stock recovery and through odin
it always goes back to stock recovery
Click to expand...
Click to collapse
How you did installed cm11 ? With Odin?
Sent from my SM-G900 using xda-developers app
xXPR0T0TYPEXx said:
How you did installed cm11 ? With Odin?
Sent from my SM-G900 using xda-developers app
Click to expand...
Click to collapse
with maclaw's twrp
and when i wanted to go back to stock rom i flashed stock recovery
warezhafid14 said:
with maclaw's twrp
and when i wanted to go back to stock rom i flashed stock recovery
Click to expand...
Click to collapse
flash custom recovery again.
then downlaod pit file from here and reboot
if it doesn´t help, download param.lfs file from here and reboot again.
if it doesn´t help again, follow the intructions here!
Good luck.
I am not resposible for any damage or bricks!!! (had the same problem and i solved it with the steps mentioned above).
m.
moonryder said:
flash custom recovery again.
then downlaod pit file from here and reboot
if it doesn´t help, download param.lfs file from here and reboot again.
if it doesn´t help again, follow the intructions here!
Good luck.
I am not resposible for any damage or bricks!!! (had the same problem and i solved it with the steps mentioned above).
m.
Click to expand...
Click to collapse
thanks man
i will try that
eventhough i did it before
i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?
warezhafid14 said:
i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?
Click to expand...
Click to collapse
then flash stock rom and try it again.
otherwise i have no idea...
moonryder said:
then flash stock rom and try it again.
otherwise i have no idea...
Click to expand...
Click to collapse
thanks man for your time
i tried flashing stock rom many times even rooted ones
anyway thanks man
i appreciate your help
warezhafid14 said:
i can't flash custom recovery
i tried flashable ones it gives me signature error
and in odin it pass but
it always goes back to stock recovery
and how is possible to flash pit file as pda?
Click to expand...
Click to collapse
Some s3 mini's can't change the recovery, it means, if you flash any recovery, your phone will go back automatically to stock recovery. You have to root your phone (example with vroot) and flash a custom recovery manually on your phone with "ROM Manager" or "[ROOT]Recovery Tools - flasher" (you can get both apps on Google play)
Screenshots :
xXPR0T0TYPEXx said:
Some s3 mini's can't change the recovery, it means, if you flash any recovery, your phone will go back automatically to stock recovery. You have to root your phone (example with vroot) and flash a custom recovery manually on your phone with "ROM Manager" or "[ROOT]Recovery Tools - flasher" (you can get both apps on Google play)
Screenshots :
Click to expand...
Click to collapse
when my phone was working i rooted with kingo
than i installed cwm using rom manager
than i flashed maclaw's twrp using cwm recovery
but my phone is not starting now
im in "Samsung Galaxy SIII Mini GT-I8190" loop
im not even reaching the Samsung logo
warezhafid14 said:
when my phone was working i rooted with kingo
than i installed cwm using rom manager
than i flashed maclaw's twrp using cwm recovery
but my phone is not starting now
im in "Samsung Galaxy SIII Mini GT-I8190" loop
im not even reaching the Samsung logo
Click to expand...
Click to collapse
Does it only happen if you flash TWRP?
xXPR0T0TYPEXx said:
Does it only happen if you flash TWRP?
Click to expand...
Click to collapse
CWM too
You said :
warezhafid14 said:
i tried flashable ones it gives me signature error
Click to expand...
Click to collapse
can you make a screenshot of this error?
xXPR0T0TYPEXx said:
You said : can you make a screenshot of this error?
Click to expand...
Click to collapse
when i turn on my phone it shows "Samsung Galaxy SIII Mini GT-I8190"
than it is supposed to show the samsung logo
but no it restarts and again "Samsung Galaxy SIII Mini GT-I8190"
infinite loop
and for flashing from recovery it said
E:signature verification failed
warezhafid14 said:
and for flashing from recovery it said
E:signature verification failed
Click to expand...
Click to collapse
Recovery must be custom.
Gw|n said:
Recovery must be custom.
Click to expand...
Click to collapse
that's what im trying to do
im trying to flash custom recovery
I have recently rooted my Sony Xperia SP 12.1.a.1.201(4.3),it was one hell of a process ! So currently my bootloader is unlocked with CWM recovery! I wanted to install a custom rom, and if i do so, i just want to know that how to go back to stock rom from cyanogen mod keeping the root! Please Help!
tanmay_sarkar said:
I have recently rooted my Sony Xperia SP 12.1.a.1.201(4.3),it was one hell of a process ! So currently my bootloader is unlocked with CWM recovery! I wanted to install a custom rom, and if i do so, i just want to know that how to go back to stock rom from cyanogen mod keeping the root! Please Help!
Click to expand...
Click to collapse
You could download and flash Exitenz rom stock based, also you can flash offical firmware by flashtool and root it
lorkan126 said:
You could download and flash Exitenz rom stock based, also you can flash offical firmware by flashtool and root it
Click to expand...
Click to collapse
what if i flash CyanogenMOD and then if i want to go back to Stock rom, isn't there a way that i cud keep root wen i go back to stock?
tanmay_sarkar said:
what if i flash CyanogenMOD and then if i want to go back to Stock rom, isn't there a way that i cud keep root wen i go back to stock?
Click to expand...
Click to collapse
No, you must root again
lorkan126 said:
No, you must root again
Click to expand...
Click to collapse
will flashtool work on Cyanogenmod? so that i could flash Stock firmware?
tanmay_sarkar said:
will flashtool work on Cyanogenmod? so that i could flash Stock firmware?
Click to expand...
Click to collapse
yes you can flash stock by flashtool it will work
lorkan126 said:
yes you can flash stock by flashtool it will work
Click to expand...
Click to collapse
flashing Stock again will lock my bootloader again or it will be unlocked only?
tanmay_sarkar said:
flashing Stock again will lock my bootloader again or it will be unlocked only?
Click to expand...
Click to collapse
Bootloader will be unlocked
lorkan126 said:
Bootloader will be unlocked
Click to expand...
Click to collapse
Thankz,By the way.. i have suggested that i could also flash pre rooted stock and den 201 kernel.. any ideas on that?
@ OP You have Q&A so quit PM me and ask all your questions here
The quick answer is yes - use your recovery to back up your rooted stock ROM. If you don't like CM simply return to your back up - it will still be rooted.
Alternatively, you have an unlocked bootloader - so you can flash Doomlord's kernel immediately after returning to stock (the kernel is insecure meaning you can flash a supersu zip in recovery to get root again).
Doomlord's latest kernels are decent and I can recommend Williams kernel too - as good as stock.
Parkside said:
The quick answer is yes - use your recovery to back up your rooted stock ROM. If you don't like CM simply return to your back up - it will still be rooted.
Alternatively, you have an unlocked bootloader - so you can flash Doomlord's kernel immediately after returning to stock (the kernel is insecure meaning you can flash a supersu zip in recovery to get root again).
Doomlord's latest kernels are decent and I can recommend Williams kernel too - as good as stock.
Click to expand...
Click to collapse
If i restore my rooted Stock Rom backed up by CWM, in this case also,do i have to Flash doomlord kernel?
tanmay_sarkar said:
If i restore my rooted Stock Rom backed up by CWM, in this case also,do i have to Flash doomlord kernel?
Click to expand...
Click to collapse
No, if you backup your rom and restore ut will be the same like you have now, kernel too, Root too