[Q] Stock recovery - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi
I have clockworkmod recovery installed on my i9000 so that I could flash CM11. If I want to go back to stock, how can I remove CWM and go back to stock recovery. If I flash back the stock ROM with CWM recovery still be installed?
Thanks

flavorcrystal7 said:
Hi
I have clockworkmod recovery installed on my i9000 so that I could flash CM11. If I want to go back to stock, how can I remove CWM and go back to stock recovery. If I flash back the stock ROM with CWM recovery still be installed?
Thanks
Click to expand...
Click to collapse
when you flash a stock ROM the stock kernel which includes stock recovery will replace the CWM recovery, so nothing to worry about, if you want CWM again flash a kernel with CWM again. to get it.
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
when you flash a stock ROM the stock kernel which includes stock recovery will replace the CWM recovery, so nothing to worry about, if you want CWM again flash a kernel with CWM again. to get it.
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
Thanks. That's exactly what I was hoping for.
Do you think it Mobile Odin would be ok to use to flash the stock firmware?
Cheers

flavorcrystal7 said:
Thanks. That's exactly what I was hoping for.
Do you think it Mobile Odin would be ok to use to flash the stock firmware?
Cheers
Click to expand...
Click to collapse
yes, Mobile Odin will work on i9000
Check this out! Links to useful Guides and " Banned " Documentaries ​

Question to mobile odin:
it is as good and secure like odin via pc ??? sorry about that question i have no experience about mobile odin,but it sounds interesting ...
How does it work ,for example when i flash a new kernel via mobile odin? Via PC i have a separate PC with its own memory, hot does mobile odin do that?
xsenman said:
yes, Mobile Odin will work on i9000
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse

freakymod2120 said:
Question to mobile odin:
it is as good and secure like odin via pc ??? sorry about that question i have no experience about mobile odin,but it sounds interesting ...
How does it work ,for example when i flash a new kernel via mobile odin? Via PC i have a separate PC with its own memory, hot does mobile odin do that?
Click to expand...
Click to collapse
I wrote about it a long time ago for korean Galaxy S, so will refer it to you as it answers your questions How to Flash using Mobile Odin
Check this out! Links to useful Guides and " Banned " Documentaries ​

Hey perfect man...my question(s) were answered ,thank you very much for this posting!!!Very interesting!
xsenman said:
I wrote about it a long time ago for korean Galaxy S, so will refer it to you as it answers your questions How to Flash using Mobile Odin
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse

Related

SGS Plus Stock Rom 2.3.6

Can anyone upload a stock rom for the SGS + but i want that the Rom is a Update.zip or a Clockworkmod recovery thanks
Please give me a link.
anil199838 said:
Please give me a link.
Click to expand...
Click to collapse
stock ROMS uses Odin 4.43 with AriesVe,ops, only custom ROMs use update.zip . check My Android Collections and use your WIKI
But when i flash them with Odin 4.43 with AiresVe Ops then i get a bootlop.
anil199838 said:
But when i flash them with Odin 4.43 with AiresVe Ops then i get a bootlop.
Click to expand...
Click to collapse
simply , use correct CWM, use CWM 6.0 or Flash a i9001 Bootloader and you will solve it , read My Android Solutions files available in My Android Collections
I find a way to get work it. I have to Wipe and make a Factory Reset.

[Q] GT-I9001 Booting in Download mode only

Hello Friends,
I tried to install Clockworkmod recovery on Samsung Galaxy S Plus (GT-I9001) but it was NOT installed properly and afterwards my phone is not booting.
After this I have
1. Tried to Un-Brick device and followed link below
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Un-Brick_the_device
But it did not worked in my case.
2. Also I have tried to install Stock ROM and followed
http://forum.xda-developers.com/showthread.php?t=1346245.
I installed it using ODIN v4.43 and it was Pass by ODIN but even after this Phone is not booting .
I am able to go in Download mode.
Please suggest me How can install ROM using ODIN v4.43 or Please suggest me any other good alternative.
ketansb said:
Please suggest me How can install ROM using ODIN v4.43 or Please suggest me any other good alternative.
Click to expand...
Click to collapse
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Look in My Android Solutions l& My Android Collections, link below for all other solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.​
It worked !!!!
xsenman said:
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Look in My Android Solutions l& My Android Collections, link below for all other solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Click to expand...
Click to collapse
Whoooo !!!! It worked . Thanx a lot.
Just adding a tip " If anybody has same problem Please select Boot and browse for Boot.tar in ODIN 4.3v. Do NOT select One package option
Read the I9001 wiki next time.. This issue has been posted and fixed a very long time ago and the solution has been posted there aswel..
ketansb said:
Whoooo !!!! It worked . Thanx a lot.
Click to expand...
Click to collapse
When your problem has been solved, EDIT your first post and remove [Q] and add [Solved]
This will help others in their search and ensure that you don't need help from anyone any-more.
Check this out! You , YES! you are an " Android ". Not your phone but U.​

Samsung Galaxy S PLUS (i9001) problems

Hi, recently, i rooted my phone and i installed cwm recovery and android 4.1.2 Jelly Bean on Samsung Galaxy S PLUS. But now i want to have my original stock rom ( Gingerbread 2.3.5/2.3.6 ). What can i do this ? I tried with Odin but this program stop with this text ( odin mode.. check plcatform verification. ). Please, someone help me to install gingerbread to my phone, please.
Raulcosn97 said:
Hi, recently, i rooted my phone and i installed cwm recovery and android 4.1.2 Jelly Bean on Samsung Galaxy S PLUS. But now i want to have my original stock rom ( Gingerbread 2.3.5/2.3.6 ). What can i do this ? I tried with Odin but this program stop with this text ( odin mode.. check plcatform verification. ). Please, someone help me to install gingerbread to my phone, please.
Click to expand...
Click to collapse
wrong forum, you need to post here anyway follow this to flash stock ROM
Check this out! Links to useful Guides and " Banned " Documentaries ​
I tried this tutorial bro but i have that problem :
odin mode...check plactform verification ...
Raulcosn97 said:
I tried this tutorial bro but i have that problem :
odin mode...check plactform verification ...
Click to expand...
Click to collapse
Flash this first Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43, after that download the correct firmware for your region from here and flash with ariesVe.ops using Odin 4.43,
the problem could be due to either your boot loader is corrupt or the ROM you are flashing is corrupted.
you can try i9001 ROM (fresh download from above link) first too
good luck & good night.
Check this out! Links to useful Guides and " Banned " Documentaries ​
Thanks! That will help me, Top!
Gesendet von meinem GT-I9001 mit Tapatalk
Thank's man but i have one problem, i don't find the rom for my country, Romania or Europe .. can i try germany ? This country is in Europa too.
EDIT: No, i can't flash this with odin, i have the same problem, odin doesen't work, he don't start anithing only say plctform verification.
I can see 2 way for you:
1. You can install clean Gingerbread backup via Recovery.
2. You can reinstall Samsung drivers on PC or change PC to another.
Did you try these methods?
jako_tako said:
I can see 2 way for you:
1. Installation clean Gingerbread backup via Recovery.
2. Reinstallation Samsung drivers on PC or change PC to another.
Click to expand...
Click to collapse
Can you give me "clean Gingerbread backup " ? Please.
Raulcosn97 said:
Thank's man but i have one problem, i don't find the rom for my country, Romania or Europe .. can i try germany ? This country is in Europa too.
EDIT: No, i can't flash this with odin, i have the same problem, odin doesen't work, he don't start anithing only say plctform verification.
Click to expand...
Click to collapse
that means you need to download the Odin 4.43 and ariesVE.ops from here and yes you can use the ROM for germany in addition what version of windows is on your PC? windows 8.1 may have problems with Odin, And if possible use a laptop to flash
Check this out! Links to useful Guides and " Banned " Documentaries ​
This doesen't work ... i try this week on my mom laptop to see if on laptop work.. but i have one more question, where i have to pot i9001 bot loader? on One Package ?
Raulcosn97 said:
This doesen't work ... i try this week on my mom laptop to see if on laptop work.. but i have one more question, where i have to pot i9001 bot loader? on One Package ?
Click to expand...
Click to collapse
you select boot loader as "Boot" in Odin
Check this out! Links to useful Guides and " Banned " Documentaries ​

[Q] stuck at recovering error (solved)

hello,
i made a stupid mistake with flashing a rom with my i9001
i "flashed" the rom at update with zip file instead of using odin.
the problem is that i cant use odin or kies (usb debugging proberbly is of).
cant get in the rom aswell.
i still have the standard recovery but the phone is unrooted!
could some one give me a solution, coz im stuck!
thanks in advance
thesmith said:
hello,
i made a stupid mistake with flashing a rom with my i9001
i "flashed" the rom at update with zip file instead of using odin.
the problem is that i cant use odin or kies (usb debugging proberbly is of).
cant get in the rom aswell.
i still have the standard recovery but the phone is unrooted!
could some one give me a solution, coz im stuck!
thanks in advance
Click to expand...
Click to collapse
Download an i9001 CWM recovery, rename it as update.zip and flash using you 3e recovery, after that do not reboot but enter CWM recovery and try install a i9000 Custom ROM ( follow full flashing guide given by developer)
Check this out! Links to useful Guides and " Banned " Documentaries ​
But is this possible without being able to put the zip file of the cwm recovery into the internal memory of the phone?
thesmith said:
But is this possible without being able to put the zip file of the cwm recovery into the internal memory of the phone?
Click to expand...
Click to collapse
sorry about that, my lack of thought, anyway the solution would be to get download mode, which can be done by using a USB JIG, either that or you have to use JTAG to flash direct to the board when download mode becomes impossible.
But First, why can't you get download mode? have you tried any of the options mentioned in MY Android Solutins, link below...since you say you have recovery mode, download mode should be good to go?. if its working, just follow the i9001 flashing guide mentioned in My Android solutions to flash a gingerbread ROM using Odin 4.43 with AriesVe.ops
Check this out! Links to useful Guides and " Banned " Documentaries ​
Booting in download mode on the phone is not a problem, the problem is that my pc doesn't reconize the phone (kies and odin)
thesmith said:
Booting in download mode on the phone is not a problem, the problem is that my pc doesn't reconize the phone (kies and odin)
Click to expand...
Click to collapse
, the solution for that is also mentioned in My Android solutions , its a sticky thread , just above this thread or follow this
Check this out! Links to useful Guides and " Banned " Documentaries ​
csc shows unknown in my sII i9100g. can i flash a custom rom without any problem? like sony mobile if i flash 4.3 rom should i flash a kernel for particular rom?pls clarify.thanx in adv.
Sent from my GT-I9100G using xda premium
i don't know what solution i need to do, when my phone is stuck at the samsung logo (for booting normaly, with samsung flashing in blue).
when i plug in the USB at that nmoment and start kies, kies says that i need to put the debuging usb option on, i can't do this because i can't get in the ROM.
what do i need to do??
__________________________________________________________________________________________________________
EDIT:: i managed to install a CWM into the phone now i've got a new problem, it always boots into the CWM, how can i boot in the rom?
____________________________________________________________
Edit:: problem resolved needed another cwm.

Urgent..!! Brick my phone Galaxy shw m110s

I have tried to flash Kitkat from the below link
http://forum.xda-developers.com/showthread.php?t=2643012
After completing all the steps my phone always goes to CMW Recovery mode.
Please help
imran514 said:
I have tried to flash Kitkat from the below link
http://forum.xda-developers.com/showthread.php?t=2643012
After completing all the steps my phone always goes to CMW Recovery mode.
Please help
Click to expand...
Click to collapse
Its always best to use just one thread and also the answer for your problem was given in that thread
If you have a problem and need to revert back to Gingerbread use the
Unbricking the Korean Galaxy S [SHW M110S] Guide, so just revert to gingerbread first and try again
Check this out! Links to useful Guides and " Banned " Documentaries ​
The Kernel is the root of the problem. I believe the kernel has to do something with this.

Categories

Resources