Hi, recently, i rooted my phone and i installed cwm recovery and android 4.1.2 Jelly Bean on Samsung Galaxy S PLUS. But now i want to have my original stock rom ( Gingerbread 2.3.5/2.3.6 ). What can i do this ? I tried with Odin but this program stop with this text ( odin mode.. check plcatform verification. ). Please, someone help me to install gingerbread to my phone, please.
Raulcosn97 said:
Hi, recently, i rooted my phone and i installed cwm recovery and android 4.1.2 Jelly Bean on Samsung Galaxy S PLUS. But now i want to have my original stock rom ( Gingerbread 2.3.5/2.3.6 ). What can i do this ? I tried with Odin but this program stop with this text ( odin mode.. check plcatform verification. ). Please, someone help me to install gingerbread to my phone, please.
Click to expand...
Click to collapse
wrong forum, you need to post here anyway follow this to flash stock ROM
Check this out! Links to useful Guides and " Banned " Documentaries
I tried this tutorial bro but i have that problem :
odin mode...check plactform verification ...
Raulcosn97 said:
I tried this tutorial bro but i have that problem :
odin mode...check plactform verification ...
Click to expand...
Click to collapse
Flash this first Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43, after that download the correct firmware for your region from here and flash with ariesVe.ops using Odin 4.43,
the problem could be due to either your boot loader is corrupt or the ROM you are flashing is corrupted.
you can try i9001 ROM (fresh download from above link) first too
good luck & good night.
Check this out! Links to useful Guides and " Banned " Documentaries
Thanks! That will help me, Top!
Gesendet von meinem GT-I9001 mit Tapatalk
Thank's man but i have one problem, i don't find the rom for my country, Romania or Europe .. can i try germany ? This country is in Europa too.
EDIT: No, i can't flash this with odin, i have the same problem, odin doesen't work, he don't start anithing only say plctform verification.
I can see 2 way for you:
1. You can install clean Gingerbread backup via Recovery.
2. You can reinstall Samsung drivers on PC or change PC to another.
Did you try these methods?
jako_tako said:
I can see 2 way for you:
1. Installation clean Gingerbread backup via Recovery.
2. Reinstallation Samsung drivers on PC or change PC to another.
Click to expand...
Click to collapse
Can you give me "clean Gingerbread backup " ? Please.
Raulcosn97 said:
Thank's man but i have one problem, i don't find the rom for my country, Romania or Europe .. can i try germany ? This country is in Europa too.
EDIT: No, i can't flash this with odin, i have the same problem, odin doesen't work, he don't start anithing only say plctform verification.
Click to expand...
Click to collapse
that means you need to download the Odin 4.43 and ariesVE.ops from here and yes you can use the ROM for germany in addition what version of windows is on your PC? windows 8.1 may have problems with Odin, And if possible use a laptop to flash
Check this out! Links to useful Guides and " Banned " Documentaries
This doesen't work ... i try this week on my mom laptop to see if on laptop work.. but i have one more question, where i have to pot i9001 bot loader? on One Package ?
Raulcosn97 said:
This doesen't work ... i try this week on my mom laptop to see if on laptop work.. but i have one more question, where i have to pot i9001 bot loader? on One Package ?
Click to expand...
Click to collapse
you select boot loader as "Boot" in Odin
Check this out! Links to useful Guides and " Banned " Documentaries
Related
To unbrick the soft-bricked Samsung Galaxy GT-I9000, I used Odin3 v3.07 and s1_odin_20100512.pit file. By mistake I checked Re-Partition and now I'm facing trouble.
1. I cannot boot the phone.
2. The phone does not start in recovery mode.
The only thing I can do with the phone is to stat it in downloading mode.
Could you please suggest me the solution of described problem?
there are many ways to fix that, if only you had used search Immma do my best to show you a few or how to search for them
1. the ezbase kit complete with info http://forum.xda-developers.com/showthread.php?t=2095519 (the link is there somewhere)
2. download a stock firmware and write with odin without ticking repartition. select pit file but do not tick repartition
basically that should help your issue, considering you still have bootloader (and I assume odin still detects the phone) it should be fairly easy to fix.
cheers and good luck with it
BEcomputer06 said:
To unbrick the soft-bricked Samsung Galaxy GT-I9000, I used Odin3 v3.07 and s1_odin_20100512.pit file. By mistake I checked Re-Partition and now I'm facing trouble.
1. I cannot boot the phone.
2. The phone does not start in recovery mode.
The only thing I can do with the phone is to stat it in downloading mode.
Could you please suggest me the solution of described problem?
Click to expand...
Click to collapse
SOLVED
I solved the problem by following this link:- http://forum.xda-developers.com/showthread.php?t=1102881
BEcomputer06 said:
I solved the problem by following this link:- http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
The thread is really long and I don't know which one to use.
I am having the same problem as you.
Could you shed me some light?
Urgent...thanks
cycy101 said:
The thread is really long and I don't know which one to use.
I am having the same problem as you.
Could you shed me some light?
Urgent...thanks
Click to expand...
Click to collapse
Follow this guide and flash the gingerbread ROM or any Rescue kit, and you should be fine
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Follow this guide and flash the gingerbread ROM or any Rescue kit, and you should be fine
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Thanks so much, it;'s back to work now....:good:
BEcomputer06 said:
To unbrick the soft-bricked Samsung Galaxy GT-I9000, I used Odin3 v3.07 and s1_odin_20100512.pit file. By mistake I checked Re-Partition and now I'm facing trouble.
1. I cannot boot the phone.
2. The phone does not start in recovery mode.
The only thing I can do with the phone is to stat it in downloading mode.
Could you please suggest me the solution of described problem?
Click to expand...
Click to collapse
Ive Re-partitioned my phone too, i flashed the PDA with CF-Root-XX_XEU_JPO-v1.2-busybox-1.17.1 and re-partition checked and i didn't notice till it was too late, my phone only boots in recovery mode and download mode
I was gonna try Ezbase recovery kit but don't know what stock rom to use
my phone is
GT I9000 (international sim free)
Firmware
2.2
Baseband
I9000xxjpp
Kernal Version
2.6.32.9
Build Number
Froyo.xxjpo
i tryed to recover in Kies but it wont find the phone even with the drivers reinstalled
can anyone link me to the rom ide need for Ezbase or give me some advice as to what i can do to recover my phone please?
Just flash gingerbread with odin and 512 pit file and you should be good.
Sent from my GT-I9000 using Tapatalk
repartition ticked in odin doesnt kill ur fone....if u have all the necessary file needed
pit, modem, CSC and PDA loaded, tick repartition and ur fone will b on da way to factory setting based ROM
unless u stop da process halfway
i got m190s dead after repair boot with riff box and flash with latest version: M190S_GINGER_HOME-IMAGE_REV03_WD19-1724_USER.tar
i got this problem: http://forum.xda-developers.com/showthread.php?t=2186081 HW: not active
i flash phone with Tegrak-Kernel-Build-38-for-M190S-WD19.tar but not succsess
so i use m190s pit file to flash phone again and now can't get phone out of recovery with thos errors :
can't mount /dev/stl11
can't mount cache:recovery/command
please help how to revive this phone again
sorry for my poor english
help pls
hi,my problem was solved after reserrect boot and recovery zone with riff.
but my problem now,can't call no network and allways i have on sreen this:
HW: not active
BOOT: SHW-190S.EA26.2034
PDA: SHW-M190S.EA26.2034
Phone: M190S.EA24.1212.ST
i tried to flash this phone with tegar kernel but always odin fail
and odin stuck at zimage and finaly give me (fail)
phone was working fine b 4 i try to flash
any idea???
elghandor said:
i tried to flash this phone with tegar kernel but always odin fail
and odin stuck at zimage and finaly give me (fail)
phone was working fine b 4 i try to flash
any idea???
Click to expand...
Click to collapse
you need to use the correct version of the kernel as per the ROM you have on your device look in How to Root and Flash Galaxy S Hoppin ( SHW M190S )
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
you need to use the correct version of the kernel as per the ROM you have on your device look in How to Root and Flash Galaxy S Hoppin ( SHW M190S )
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
thnx for yr care
i tried both kernel
Tegrak VG12
Tegrak WD19
but odin give me error too
my phone just stuck at anycall logo
now iam tryingto download this ver and flash to the phone ( VG12)
or u can give me first step to start from it
thnx again sir
i tried to flash with these ver. too
M190S-FROYO-HOME-IMAGE-REV03-EA26-2034-USER.tar
SHW-M190S VG12
SHW-M190S VH04
SHW-M190S WD19
and on my way to try SHW-M190S WC16
will post result here..............
i tried with (M190S_GINGER_HOME-IMAGE_REV03_WC16-1527_USER.tar.md5)
and
(M190S-FROYO-HOME-IMAGE-REV03-EA26-2034-USER.tar.md5)
but no success
any help
plz
Hello Friends,
I tried to install Clockworkmod recovery on Samsung Galaxy S Plus (GT-I9001) but it was NOT installed properly and afterwards my phone is not booting.
After this I have
1. Tried to Un-Brick device and followed link below
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Un-Brick_the_device
But it did not worked in my case.
2. Also I have tried to install Stock ROM and followed
http://forum.xda-developers.com/showthread.php?t=1346245.
I installed it using ODIN v4.43 and it was Pass by ODIN but even after this Phone is not booting .
I am able to go in Download mode.
Please suggest me How can install ROM using ODIN v4.43 or Please suggest me any other good alternative.
ketansb said:
Please suggest me How can install ROM using ODIN v4.43 or Please suggest me any other good alternative.
Click to expand...
Click to collapse
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Look in My Android Solutions l& My Android Collections, link below for all other solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.
It worked !!!!
xsenman said:
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Look in My Android Solutions l& My Android Collections, link below for all other solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
Whoooo !!!! It worked . Thanx a lot.
Just adding a tip " If anybody has same problem Please select Boot and browse for Boot.tar in ODIN 4.3v. Do NOT select One package option
Read the I9001 wiki next time.. This issue has been posted and fixed a very long time ago and the solution has been posted there aswel..
ketansb said:
Whoooo !!!! It worked . Thanx a lot.
Click to expand...
Click to collapse
When your problem has been solved, EDIT your first post and remove [Q] and add [Solved]
This will help others in their search and ensure that you don't need help from anyone any-more.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Hi
I have clockworkmod recovery installed on my i9000 so that I could flash CM11. If I want to go back to stock, how can I remove CWM and go back to stock recovery. If I flash back the stock ROM with CWM recovery still be installed?
Thanks
flavorcrystal7 said:
Hi
I have clockworkmod recovery installed on my i9000 so that I could flash CM11. If I want to go back to stock, how can I remove CWM and go back to stock recovery. If I flash back the stock ROM with CWM recovery still be installed?
Thanks
Click to expand...
Click to collapse
when you flash a stock ROM the stock kernel which includes stock recovery will replace the CWM recovery, so nothing to worry about, if you want CWM again flash a kernel with CWM again. to get it.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
when you flash a stock ROM the stock kernel which includes stock recovery will replace the CWM recovery, so nothing to worry about, if you want CWM again flash a kernel with CWM again. to get it.
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Thanks. That's exactly what I was hoping for.
Do you think it Mobile Odin would be ok to use to flash the stock firmware?
Cheers
flavorcrystal7 said:
Thanks. That's exactly what I was hoping for.
Do you think it Mobile Odin would be ok to use to flash the stock firmware?
Cheers
Click to expand...
Click to collapse
yes, Mobile Odin will work on i9000
Check this out! Links to useful Guides and " Banned " Documentaries
Question to mobile odin:
it is as good and secure like odin via pc ??? sorry about that question i have no experience about mobile odin,but it sounds interesting ...
How does it work ,for example when i flash a new kernel via mobile odin? Via PC i have a separate PC with its own memory, hot does mobile odin do that?
xsenman said:
yes, Mobile Odin will work on i9000
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
freakymod2120 said:
Question to mobile odin:
it is as good and secure like odin via pc ??? sorry about that question i have no experience about mobile odin,but it sounds interesting ...
How does it work ,for example when i flash a new kernel via mobile odin? Via PC i have a separate PC with its own memory, hot does mobile odin do that?
Click to expand...
Click to collapse
I wrote about it a long time ago for korean Galaxy S, so will refer it to you as it answers your questions How to Flash using Mobile Odin
Check this out! Links to useful Guides and " Banned " Documentaries
Hey perfect man...my question(s) were answered ,thank you very much for this posting!!!Very interesting!
xsenman said:
I wrote about it a long time ago for korean Galaxy S, so will refer it to you as it answers your questions How to Flash using Mobile Odin
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
hello,
i made a stupid mistake with flashing a rom with my i9001
i "flashed" the rom at update with zip file instead of using odin.
the problem is that i cant use odin or kies (usb debugging proberbly is of).
cant get in the rom aswell.
i still have the standard recovery but the phone is unrooted!
could some one give me a solution, coz im stuck!
thanks in advance
thesmith said:
hello,
i made a stupid mistake with flashing a rom with my i9001
i "flashed" the rom at update with zip file instead of using odin.
the problem is that i cant use odin or kies (usb debugging proberbly is of).
cant get in the rom aswell.
i still have the standard recovery but the phone is unrooted!
could some one give me a solution, coz im stuck!
thanks in advance
Click to expand...
Click to collapse
Download an i9001 CWM recovery, rename it as update.zip and flash using you 3e recovery, after that do not reboot but enter CWM recovery and try install a i9000 Custom ROM ( follow full flashing guide given by developer)
Check this out! Links to useful Guides and " Banned " Documentaries
But is this possible without being able to put the zip file of the cwm recovery into the internal memory of the phone?
thesmith said:
But is this possible without being able to put the zip file of the cwm recovery into the internal memory of the phone?
Click to expand...
Click to collapse
sorry about that, my lack of thought, anyway the solution would be to get download mode, which can be done by using a USB JIG, either that or you have to use JTAG to flash direct to the board when download mode becomes impossible.
But First, why can't you get download mode? have you tried any of the options mentioned in MY Android Solutins, link below...since you say you have recovery mode, download mode should be good to go?. if its working, just follow the i9001 flashing guide mentioned in My Android solutions to flash a gingerbread ROM using Odin 4.43 with AriesVe.ops
Check this out! Links to useful Guides and " Banned " Documentaries
Booting in download mode on the phone is not a problem, the problem is that my pc doesn't reconize the phone (kies and odin)
thesmith said:
Booting in download mode on the phone is not a problem, the problem is that my pc doesn't reconize the phone (kies and odin)
Click to expand...
Click to collapse
, the solution for that is also mentioned in My Android solutions , its a sticky thread , just above this thread or follow this
Check this out! Links to useful Guides and " Banned " Documentaries
csc shows unknown in my sII i9100g. can i flash a custom rom without any problem? like sony mobile if i flash 4.3 rom should i flash a kernel for particular rom?pls clarify.thanx in adv.
Sent from my GT-I9100G using xda premium
i don't know what solution i need to do, when my phone is stuck at the samsung logo (for booting normaly, with samsung flashing in blue).
when i plug in the USB at that nmoment and start kies, kies says that i need to put the debuging usb option on, i can't do this because i can't get in the ROM.
what do i need to do??
__________________________________________________________________________________________________________
EDIT:: i managed to install a CWM into the phone now i've got a new problem, it always boots into the CWM, how can i boot in the rom?
____________________________________________________________
Edit:: problem resolved needed another cwm.