problem for me after update from ICS to JB, my flipped cased are useless due to answer phone button been switched up a lil and unablle answer call directly.can anybody help me slove this problem?like changhing position of answer phone button?
Related
Is there a way to lock onscreen phone buttons?
Everytime someone calls, and diamond is in my pocket I either accept or reject call when trying to get it out of pocket.
So can I dectivate touch screen during incoming call?
Is there any tweak for this?
Greets guys
dont own a diamond but a quickfix...get bigger jeans.
No way... too big balls will bounce
resolved!!!
the fastest way to solve your problem is to install s2u2 (slide to unlock) newest version is 1.05 what i know...
so with the right settings when incoming call, you'll need to slide then answer/reject call or setup slide to answer or other.
its great i LOVE IT..
I just installed it... then uninstalled it 5 mins later because it looks GHASTLY!!
To lock the touch screen buttons you simply hold down the End Call button for a few seconds. Or is it the physical buttons that you're trying to lock?
You didn't get it
I want touch screen buttons to be locked DURING incoming call to be sure i wont press them when trying to put it out of pocket.
Even if diamond is locked, when phonecall screen appears, those buttons are ACTIVE and that is baaaaad
and S2U2.... doesn't work!!!
When incoming call, original diamond call screen appears and buttons are ACTIVE - su2u DOES NOT lock device during the call although there's option called 'slide to answer'
lookass said:
You didn't get it
I want touch screen buttons to be locked DURING incoming call to be sure i wont press them when trying to put it out of pocket.
Even if diamond is locked, when phonecall screen appears, those buttons are ACTIVE and that is baaaaad
and S2U2.... doesn't work!!!
When incoming call, original diamond call screen appears and buttons are ACTIVE - su2u DOES NOT lock device during the call although there's option called 'slide to answer'
Click to expand...
Click to collapse
You are right: I do not get you.
At least I do not see your point. You want to have the phone locked during incoming calls? - how senseless is that. Especially in that moment I want to have it unlocked to be able to accept it. That is the way all my phones worked.
What do you do, if you get a call and have a your cell in the pocket? I never encountered such problems...
Jeeeeeeeezzzzzzzz !!!
In Diamond one can answer a call in two ways:
1. press onscreen button
2. press hardware button
Onscreen button can be pressed accidentaly while taking out of pocket, pouch or whatever.
So: All i want is to have onscreen buttons INACTIVE while hardware buttons ACTIVE so I can answer call ONLY by pressing answer HARDWARE button.
Tapping onscreen button will do NO ACTION.
Hope now everything is clear, cause my english isn't very good
^^and you made a joke when i offered my quick fix =P
I have the same problem that by the time I get the case out of the case i find that I accidently answered or hung up because I accidentaly touched the screen,I tried slide to answer but it is not working properly on the Diamond
This would be helpful, I have the same problem sometimes.
I'll look for a registry setting.
s2u2 not working?????
if its bad, ugly, or something, put an self image as backgruond, maybee that would cheer u up, im using version 1.00 that dosent got the slide to answer working good(beta), so i turned it of, then it worked great and i can still use hardware buttuns to answer, and if u dont like the apperence just remove background an d remove clock, all thats left is a black screen and the slider...
This thing with enabled screen answer/ignore buttons pisses me off too... May be we can install a new dialler without screen buttons?
Really no one cares?
nikitich said:
Really no one cares?
Click to expand...
Click to collapse
i don't think it's about anyone caring. i think it's about the diamond being a new device and no one having the tricks/tips/tweaks yet. patience
I understand that. But if nobody care about an issue no one will look for the solution. I would install another dialer but i do not know how to uninstall the existing one.
jehlinger said:
This would be helpful, I have the same problem sometimes.
I'll look for a registry setting.
Click to expand...
Click to collapse
Be great if you (or anyone else?) could find a hack for this - I have the same problem when taking the phone out of the case. It would solve my (our) problem if only the hardware buttons could answer/reject an incoming call.
Regards,
Gary.
Since nobody answered this thread anymore... Did someone find out? Or did you give up?
I need this badly, stupid on screen buttons always go off
I had the same problem but after i did this I had no problem anymore.
The answer button in default phone skin(WM6) is much smaller so the risk of accidentally reject or answer the call is not so high.
hi guys,
i buy my HD7 yesterday but, big problem..when i try to make a call (or receive a call) i cant see any dialer cause my screen become black.. i can juste power of the hd7..
is it a software problem ? or a hardaware problem (sensor? ) for you?
gropich said:
hi guys,
i buy my HD7 yesterday but, big problem..when i try to make a call (or receive a call) i cant see any dialer cause my screen become black.. i can juste power of the hd7..
is it a software problem ? or a hardaware problem (sensor? ) for you?
Click to expand...
Click to collapse
I'm not sure I understand your problem. The proximity sensor makes the screen go black during a phone call and should turn back on if you pull it away from your ear... but it sounds like your screen is black before a call is connected, correct? Or is it that it won't come back on during a call?
I would try a hard reset. Turn the phone off. When you turn the phone back on, hold down the volume up and volume down buttons. Follow the instructions. See if that fixes your problem.
See this...
http://forum.xda-developers.com/showthread.php?t=864311
i had the same problem. I found out it was a bug. the only thing u had to do is formated and it work like new
Hi guys
I am not sure if this has been posted before, i did a quick search but nothing shows up.
Sometimes If I hold the pen close enough (but without touching) the screen would annoyingly picks it up. The problem is way more apparent if I hold the phone upside down, with the screen facing downwards and holding the pen inclined at an angle. Is this a common problem?
also >>
On incoming calls the screen will not lock and not allow me to answer the call. I am unable to slide the "answer bar" across the screen, to answer calls. It won't move. This does not happen on every call but on average about 6 out of 10 calls. I went to the Verizon store and they could not make the problem occur and said they have never heard of this problem. Has anyone else had this happen. I'm trying to determine if this is a hardware problem with my phone of if it is a software problem.
what we can do , i think we should send this conversation to Samsung , i dont know how ask Samsung about this problem , if any one can send link of this conversation to Samsung may be they replay , if it is hardware problem we will go to agent , if software we can solve it online
please please please we i need help
spen
spen has its calibration and when the phone is upside down
(or even tilted,..) it tends to lose itself.
It happens with everyone. So you are not alone.
first thank you , so what about a i can not answer
Hi,
well i've looked in the similar threads but they were not this problem!
my Power Button was broken for the third time (that's a common problem for nexus one users i guess)
and i fixed it this time with another way (a repairman did it. the previous method, which i used twice, was replacing the logic board with a new one)
but after fixing it, my phone slowly began to recover that problem PLUS losing my camera,proximity sensor and LED flash. i'm sure it's because it felled down once and after that they happened.
He fixed it again but again...it dropped :|
well that person is no longer available and the thing is I just wanna use some commands or whatever else to disable the use of proximity sensor,
because i face screen off and no way to wake it up after any sorts of call! (unless i remove the battery,Use VOL DOWN+TRACKBALL+POWER BUTTON to reboot or connect my phone to a USB or a Charger.)
can anyone help???
PLEASE i'm really exhausted about this phone...i can't sell it...neither can afford more money!
Hi i'm just brought HTC one m7 2 weeks ago but completely using it just for a week, here is my problem. While during a call both calling and receiving a call my phone will turn on airplane mode and drop the call, and sometime the phone just drop the call. I already Hard reset my cell. but still facing the same problem. what should i do right now? its so annoying... :crying: thanks in advance
Kaetae said:
Hi i'm just brought HTC one m7 2 weeks ago but completely using it just for a week, here is my problem. While during a call both calling and receiving a call my phone will turn on airplane mode and drop the call, and sometime the phone just drop the call. I already Hard reset my cell. but still facing the same problem. what should i do right now? its so annoying... :crying: thanks in advance
Click to expand...
Click to collapse
No one face this problem?
Kaetae said:
No one face this problem?
Click to expand...
Click to collapse
I use my HTC One for calling most of the time and for more than a month now I haven't encountered this situation as of yet. Maybe try reflashing the ROM instead of doing a wipe. There are a couple of RUUs in this forum you can download if you're not rooted/unlocked.
I am having the same problem, anyone got any solutions??
jag233 said:
I am having the same problem, anyone got any solutions??
Click to expand...
Click to collapse
Can this be produced reliably? If it can, go to your dealer and show it to them
htc one airplane mode
Kaetae said:
Hi i'm just brought HTC one m7 2 weeks ago but completely using it just for a week, here is my problem. While during a call both calling and receiving a call my phone will turn on airplane mode and drop the call, and sometime the phone just drop the call. I already Hard reset my cell. but still facing the same problem. what should i do right now? its so annoying... :crying: thanks in advance
Click to expand...
Click to collapse
Hi guys - I too had this problem and even replaced my first handset to find i was still having the problem. The answer is annoyingly simple and that is you are all no doubt using your phone in your left hand (as I do) and the sensor which deacrivates the screen is in the top left of the front of the phone.. no problem when using ur right hand to call as the sensor is flat to your ear but in the other, if the phone is not totally planted.. the sensor sometimes hangs in the open or is away from your head far enough to activate the screen and you are accessing the drop down menu with your ear! Design flaw in my opinion but there are 2 things you can do 1) the sound comes out of the entire length of the speaker so get used to putting your ear as close to the sensor as poss 2) once dialled or answered call, hit the screen lock button manually to deactivate the screen for the duration of the call. Hope this helps.
Pelbee said:
Hi guys - I too had this problem and even replaced my first handset to find i was still having the problem. The answer is annoyingly simple and that is you are all no doubt using your phone in your left hand (as I do) and the sensor which deacrivates the screen is in the top left of the front of the phone.. no problem when using ur right hand to call as the sensor is flat to your ear but in the other, if the phone is not totally planted.. the sensor sometimes hangs in the open or is away from your head far enough to activate the screen and you are accessing the drop down menu with your ear! Design flaw in my opinion but there are 2 things you can do 1) the sound comes out of the entire length of the speaker so get used to putting your ear as close to the sensor as poss 2) once dialled or answered call, hit the screen lock button manually to deactivate the screen for the duration of the call. Hope this helps.
Click to expand...
Click to collapse
I can confirm this. I also use my left hand / left ear for calls and my calls often die in the middle of the call because my ear has enabled Airplane mode. Sometime it happens during important calls and is absolutely infuriating and stressful. What's more, often people try to call you back but can't because it takes about 10 seconds for the phone to turn wireless back on and register with the network.
This is really poor form and rather an embarrassing oversight for HTC. I have just switched from a Samsung Galaxy S4 and this is my first HTC and even though its clearly a great phone - failing on actual phone part of a smartphone is inexcusable. If anyone comes up with a solution in the meantime, please post it here. Thanks
Turn the screen off manually when it's too dark for the proximity sensor to measure proximity.