Related
Ok, I have rooted samsung tablet 8.9 and made CWM back up. Tablet went into reboot and it having distorts at the boot up power. I pressed Power + volume up for recovery holding 15 secs until you see Package and download.
I pressed volume down at download section and continued to go into odin mode, but nothing has been appear nothing but black screen and then tablet reboots itself and having distorts loop again right after samsung logo. (power on then shows samsung logo goes into distorts then tablet power down and power on repeat same thing)
tried package and it crashed.
Looks like i am unable to have this tablet recovered?
if no fix, I'm returning to best buy store and play dumb for full refund/exchange.
Thanks for your help.
Hi, did you ever get any help for this. I just had the same thing happen (except that I don't know what cwm is) and I haven't gotten a response to my post. It seems that those who install ROM Manager on the 8.9 and enter recovery mode are having this problem - that's what happened to me while I was following instructions on this site. I found the unbrick thread in the andriod development section but the system won't allow me to post there because I'm a noob. There is some terminology I don't understand from the thread, so I need some assistance.
What I'm reading is that I need to find the rom for my device GT 8.9 wifi only (P7310) and flash it to Odin. Where do I find this rom - does it have to be stock? Can it be one of the custom roms from these pages? How do I flash it?
Thanks in advance for the help of some kind soul out there. I'm kind of panicking here. Please help.
Thanks!
If anyone has this problem in the future and has the GT-7310 Samsung Galaxy Tab 8.9 wifi only. This is what I used to unbrick: http://forum.xda-developers.com/showthread.php?t=1406137
More precisely, I downloaded the link at the end of the page, downloaded the link that says: KJ5 for the 7310 (there is also a link for the 7300 version). I only used the sections regarding ODIN3: "FAQ regarding ODIN" and down further in the HOW TO section: [Using ODIN 1.85].
Install Odin via the link downloaded at the bottom of the page.
Download the firmware/rom that is given through the KJ5 link (it takes over an hour to download FYI)
I did not have or use any PIT or CSC files
I booted the tablet into download mode: press power button until Samsung logo appears -> Press the left or upper portion of the rocker button (depending on the orientation you are holding the tablet in) until two icons appear -> press the right/bottom portion of the rocker button to select DOWNLOAD mode -> connect tablet to Windows PC with ODIN3 installed and ON.
In Odin3 select PDA button and look for the firmware you downloaded via the KJ5 link (you will have to unzip the file first using the password: samfirmware.com), click on the .tar file (P7310UEKJ5_P7310XARKJ5_XAR\P7310XARKJ5_P7310UEKJ5_HOME.tar.md5).
With tablet connected to computer and Oden set up as indicated, Oden should detect the tablet and indicate with in yellow in the ID:COM square on the Oden interface. At this point I pushed the start button and let it run until ODEN says "PASS". Then I disconnected and allowed the tablet to auto-reboot. It was a little slower than usual to reboot and I had to manually shut it down and reboot again to get mine to work and the system to fully boot again.
Anyway, I had a lot of trouble sifting through all the terminology and figuring out what was right for the scenario I was experiencing, so I hope this helps some noob out there that was in the same boat I was. Firmware/roms/flashing/etc. I didn't know what any of this was, so someone saying to flash my drive was of no use to me!
Anyway, good luck!
hi,
by mistake i closed odin during update
now the device not turn on !!!
i tried to press vol- and power and vol+ and power nothing happened.
and windows not detect the device.
please help...
what should i do to bring it back to life
maalzaben said:
hi,
by mistake i closed odin during update
now the device not turn on !!!
i tried to press vol- and power and vol+ and power nothing happened.
and windows not detect the device.
please help...
what should i do to bring it back to life
Click to expand...
Click to collapse
Try to charge it fo about 4 hours first. See if you can see the battery icon during charging.
Meanwhile, could you tell us the chronological detail of what happened?
1. What type of G-Tab do you have? P1000? GSM/CDMA?
2. What firmware/kernel did you have before flashing? and what were you trying to flash using ODIN?
Which step were you in when you accidentally close ODIN?
can you explain in more detail?
yappoe said:
Try to charge it fo about 4 hours first. See if you can see the battery icon during charging.
Meanwhile, could you tell us the chronological detail of what happened?
1. What type of G-Tab do you have? P1000? GSM/CDMA?
2. What firmware/kernel did you have before flashing? and what were you trying to flash using ODIN?
Which step were you in when you accidentally close ODIN?
Click to expand...
Click to collapse
it's GT-P1000 not sure about GSM OR CDMA.
before flashing:
2.3.3
P1000JPJPC
and i tried to flash with the same P1000JPJPC.
it is same this model
this is what i know
maalzaben said:
it's GT-P1000 not sure about GSM OR CDMA.
before flashing:
2.3.3
P1000JPJPC
and i tried to flash with the same P1000JPJPC.
it is same this model
this is what i know
Click to expand...
Click to collapse
If you had JPJPC, then your G-Tab is GSM P1000.
well, with this limited amount of information can't help you much, but, try these steps first:
1. Charge your G-tab by charger for about 4 hours. (Please let us know if you get battery icon while charging.. But continue charge your G-tab for 4 hours even if you do not see any battery icon).
2. If after charging you can go to download mode (Power+Volume down), than great. Continue just flash as you were but be more careful.
if after charging you still can't go to download mode, then try do this:
a. On your computer, start ODIN.
b. Connect your Gtab to PC using USB Connection.
c. While connected, press the POWER + VOLUME DOWN button for about 5
seconds then release. See if ODIN can detect your device.
If after you did these steps ODIN can detect your device, go ahead flash your G-tab with the ROM you were flashing, even if you can't see anything on your screen.
If that doesn't work, post again, we'll try something else.
See this guide for references that you think may help you too:
http://forum.xda-developers.com/showthread.php?t=1133590
Note (if works after step 2):
you can download any official firmware at http://fus.nanzen.se/
1. Download Check Fus Downloader 2.1
Open Check Fus Downloader, and select the correct model of your G-Tab, choose a Firmware for your region. It will automatically decode the .enc2 file to.zip file
2. Extract the .zip file generated from decoding file to a folder and you will get
tar.md 5 file.
3. Start Odin - put the .md5 to PDA and leave everything else as is.
4. Go to download mode on the G-tab (Power + Volume down) - connect to your computer.
and click start. It takes about 6 to 7 minutes to do the flashing.
Can't guarentee if it would work, but good luck.
yappoe said:
If you had JPJPC, then your G-Tab is GSM P1000.
well, with this limited amount of information can't help you much, but, try these steps first:
1. Charge your G-tab by charger for about 4 hours. (Please let us know if you get battery icon while charging.. But continue charge your G-tab for 4 hours even if you do not see any battery icon).
2. If after charging you can go to download mode (Power+Volume down), than great. Continue just flash as you were but be more careful.
if after charging you still can't go to download mode, then try do this:
a. On your computer, start ODIN.
b. Connect your Gtab to PC using USB Connection.
c. While connected, press the POWER + VOLUME DOWN button for about 5
seconds then release. See if ODIN can detect your device.
If after you did these steps ODIN can detect your device, go ahead flash your G-tab with the ROM you were flashing, even if you can't see anything on your screen.
If that doesn't work, post again, we'll try something else.
See this guide for references that you think may help you too:
http://forum.xda-developers.com/showthread.php?t=1133590
Note (if works after step 2):
you can download any official firmware at http://fus.nanzen.se/
1. Download Check Fus Downloader 2.1
Open Check Fus Downloader, and select the correct model of your G-Tab, choose a Firmware for your region. It will automatically decode the .enc2 file to.zip file
2. Extract the .zip file generated from decoding file to a folder and you will get
tar.md 5 file.
3. Start Odin - put the .md5 to PDA and leave everything else as is.
4. Go to download mode on the G-tab (Power + Volume down) - connect to your computer.
and click start. It takes about 6 to 7 minutes to do the flashing.
Can't guarentee if it would work, but good luck.
Click to expand...
Click to collapse
I charged it 4 hours and no battery icon
ODIN can't detect my device!!!
when in connect it to usb message showed up:
please see attachment
it seems your device has got stuck in are S5PC110 development mode
Have a read here:
http://forum.xda-developers.com/showthread.php?t=1257434
kaanoglu said:
it seems your device has got stuck in are S5PC110 development mode
Have a read here:
http://forum.xda-developers.com/showthread.php?t=1257434
Click to expand...
Click to collapse
Yeap, seems like you 'bricked' ur G-tab. Please follow the following thread CAREFULLY. It looks hard and messy, but its actually not that bad.
http://forum.xda-developers.com/showthread.php?t=1312391
Good luck.
Well Done!
Thank U both of you [yappoe ] & [kaanoglu]
Now my Tab back again to Life
Good experience
hello, which one works on you? i tried to flash GT-P1000 using Odin, it completed successfully but my tab doesn't turned on. I tried charging for 4 hours with no battery charging icon.
gambitr7 said:
hello, which one works on you? i tried to flash GT-P1000 using Odin, it completed successfully but my tab doesn't turned on. I tried charging for 4 hours with no battery charging icon.
Click to expand...
Click to collapse
It is possible u flashedd the wrong ROM or kernel that sgould not be used for your device. Although you have a blank screen, see if odin can recognize your tab.
Plug your gtab to the computer, start odin, press volume down+power button for 5 seconds. If odin still can see you than flash a rom following the check fus instruction above.
help me
My gtab doesn't power on.I flashed p1000xxjq1.When power on stop at samsung logo and run run run.
achaa said:
My gtab doesn't power on.I flashed p1000xxjq1.When power on stop at samsung logo and run run run.
Click to expand...
Click to collapse
Plug your gtab to the computer, start odin, press volume down+power button for 5 seconds. If odin still can see you than flash a ROM.
gambitr7 said:
hello, which one works on you? i tried to flash GT-P1000 using Odin, it completed successfully but my tab doesn't turned on. I tried charging for 4 hours with no battery charging icon.
Click to expand...
Click to collapse
I followed the procedure but ma phone is not coming to home screen just that samsung gloing logo comin up.
Pls tell me wat to do next.
When i activate recovery mode and chose to proceed flah from internal storage it shows Cant mount sdcard.
Choose external?
It might get swapped around
Sent from my GT-I9300 using xda app-developers app
my device just now also cant turn on.but my home button had light when i touched the screen.i charged for 4hours ++ without battery charging icon.and after finish charging i try power+ vol down.screen still black.but had light on home button.and i tried power + vol up.luckily my tab working back in CWM recovery mode.stuck on recovery for a while because when i press reboot its keep coming back to recovery.but at last the tab working with 40% power and hopefully its will working like charm.my solution is charging for 4hours and try open it back.
maalzaben said:
I charged it 4 hours and no battery icon
ODIN can't detect my device!!!
when in connect it to usb message showed up:
please see attachment
Click to expand...
Click to collapse
i have a same problem, when i charge it, it turn the screen like the attachment... then when i connect the usb the screen turn blank, also odin cannot detect my device..
safffwan said:
i have a same problem, when i charge it, it turn the screen like the attachment
Click to expand...
Click to collapse
Your tab is in download mode. If you can't update your tab with odin, then try with heimdall.
glussier said:
Your tab is in download mode. If you can't update your tab with odin, then try with heimdall.
Click to expand...
Click to collapse
either of them can detect my device. the screen only turn like that when i charge it, when i unplug it, it turn off and cannot turn on even i press home+vol down button
I know what it does. If you plug your device via usb, eventually, the screen will turn on, and you'll be able to flash your device via Odin or Heimdall. The difference between the usb port and the charger, is that the usb port only gives the tab 500mA of power, the charger gives the tab 2000mA.
Hi.. I am little new with Note with ICS
It has entered in a boot loop where it reaches the home screen. and in about 10 sec reboots itself. I tried taking out the battery, still same problem. Than I tried putting it in recovery mode and resetting it to factory settings by pressing power,up volume and home button together, but it want go to recovery mode, samsung logo and model no comes up than black screen and again samsung logo and model no. Tried it with pluged in to PC as well.
Any help will be appreciated
Thanx
Abdur
Hello abdurm, could you tell us your current firmware? You would require to give us details from Settings > About phone.
Also, did you try flashing anything? If so, what was it?
By pressing the Volume Down button + Home button + Power button simultaneously, does your device enter Download mode?
YLNdroid said:
Hello abdurm, could you tell us your current firmware? You would require to give us details from Settings > About phone.
Also, did you try flashing anything? If so, what was it?
By pressing the Volume Down button + Home button + Power button simultaneously, does your device enter Download mode?
Click to expand...
Click to collapse
It dosen give me enough time to check firmware version, it reboots. It is on ICS. It is stock and I have not tried fashing or anything.
Yes it goes in download mode by pressing Volume Down button + Home button + Power button simultaneously.
Flash gingerbread rom in PC ODIN only and it will automatically reboot by itself but if still stuck in samsung logo go to recovery mode and wipe data and cache.
abdurm said:
It dosen give me enough time to check firmware version, it reboots. It is on ICS. It is stock and I have not tried fashing or anything.
Yes it goes in download mode by pressing Volume Down button + Home button + Power button simultaneously.
Click to expand...
Click to collapse
Download pre rooted gb rom from my signature and flash it via pc odin. Your phone must be in download mode and don't change any settings in pc odin.
Cheers
sahilarora2003 said:
Download pre rooted gb rom from my signature and flash it via pc odin. Your phone must be in download mode and don't change any settings in pc odin.
Cheers
Click to expand...
Click to collapse
Thank you very much. Just one last thing I dont have to be rooted to instal this ROM and it is ok to flash directly from ICS . Just downloadFilename: SGN_XX_OXA_KJ1_FACTORYFS.zip and flash it. And it will leave me with GB?
abdurm said:
It dosen give me enough time to check firmware version, it reboots. It is on ICS. It is stock and I have not tried fashing or anything.
Yes it goes in download mode by pressing Volume Down button + Home button + Power button simultaneously.
Click to expand...
Click to collapse
Apologies abdurm, I foolishly presumed you would have made a note of your device's firmware details at some point in the past. It was stupid of me to ask you for the said information.
abdurm said:
Thank you very much. Just one last thing I dont have to be rooted to instal this ROM and it is ok to flash directly from ICS . Just downloadFilename: SGN_XX_OXA_KJ1_FACTORYFS.zip and flash it. And it will leave me with GB?
Click to expand...
Click to collapse
1] Download the pre-rooted stock Gingerbread firmware, SGN_XX_OXA_KJ1_FACTORYFS.zip and extract it to get the SGN_XX_OXA_KJ1_FACTORYFS.tar file.
2] After doing so, run PC ODIN, select the PDA tab in it and point to the extracted file (SGN_XX_OXA_KJ1_FACTORYFS.tar). Auto Reboot and F.Reset Time will be selected by default. Do not select anything else.
3] Put your device in Download Mode and then connect it to your PC via the USB cable. The ID:COM label in PC ODIN will turn yellow indicating your device is connected and recognised.
4] Click on the Start button in PC ODIN and wait for the label above ID:COM to say Pass. After it does so, disconnect your device from your PC.
Your device will reboot and you will be on a stock Gingerbread firmware with root privilege.
YLNdroid said:
Apologies abdurm, I foolishly presumed you would have made a note of your device's firmware details at some point in the past. It was stupid of me to ask you for the said information.
1] Download the pre-rooted stock Gingerbread firmware, SGN_XX_OXA_KJ1_FACTORYFS.zip and extract it to get the SGN_XX_OXA_KJ1_FACTORYFS.tar file.
2] After doing so, run PC ODIN, select the PDA tab in it and point to the extracted file (SGN_XX_OXA_KJ1_FACTORYFS.tar). Auto Reboot and F.Reset Time will be selected by default. Do not select anything else.
3] Put your device in Download Mode and then connect it to your PC via the USB cable. The ID:COM label in PC ODIN will turn yellow indicating your device is connected and recognised.
4] Click on the Start button in PC ODIN and wait for the label above ID:COM to say Pass. After it does so, disconnect your device from your PC.
Your device will reboot and you will be on a stock Gingerbread firmware with root privilege.
Click to expand...
Click to collapse
Thank you very much, my note is finally working. How can I go to ICS, it doesnt show up in software update
abdurm said:
Thank you very much, my note is finally working. How can I go to ICS, it doesnt show up in software update
Click to expand...
Click to collapse
Hello again abdurm, I am glad to learn your device is up and running again. :highfive:
Now that you are on a rooted firmware, I would advice you not to avail an OTA update as there is a very high likelihood of it breaking/undoing the root privilege.
Personally, I have not ventured into Ice Cream Sandwich yet and thus I have no right to guide you with the process of acquiring it. But, based on your quoted post may I ask you if you desire to have stock Ice Cream Sandwich with or without root privilege?
I recommend you thoroughly read dr.ketan's threads which explain the subject at hand.
Help please my phone is now black screen i can charge it offline & can access Download mode but when i reboot or tried to go to recovery mode my phone just stays at black screen,. i can even see the "galaxy note 5 icon"
please help me asap
anyone can help please?
Greatfullded said:
Help please my phone is now black screen i can charge it offline & can access Download mode but when i reboot or tried to go to recovery mode my phone just stays at black screen,. i can even see the "galaxy note 5 icon"
Click to expand...
Click to collapse
1)Kindly mention you model no/firmware your using/any activity you have done with phone like rooting or flashing custom rom
2)Be specific while posting your query so that anyone can help you with accurate assistance
DroidHackeR said:
1)Kindly mention you model no/firmware your using/any activity you have done with phone like rooting or flashing custom rom
2)Be specific while posting your query so that anyone can help you with accurate assistance
Click to expand...
Click to collapse
1) SM-N920I/on Custom Rom(future rom)/i attempt to replace a image to make a boot splash zip
2) ok sorry noted
Greatfullded said:
1) SM-N920I/on Custom Rom(future rom)/i attempt to replace a image to make a boot splash zip
2) ok sorry noted
Click to expand...
Click to collapse
Are you facing the bootloop still or your issue is solved? As question is bit old so i guess your problem might have been solved, if not then let me guide you further
DroidHackeR said:
Are you facing the bootloop still or your issue is solved? As question is bit old so i guess your problem might have been solved, if not then let me guide you further
Click to expand...
Click to collapse
i still face this issue
Greatfullded said:
i still face this issue
Click to expand...
Click to collapse
1)Download Note 5 Stock Bootlogo Odin.tar from below attached Download Link
OP:-
https://forum.xda-developers.com/note5/themes-apps/splash-screen-galaxy-note-5-t3559360
Download Link:-
https://www.androidfilehost.com/?fid=457095661767146761
2)Press Volume Down+Power+Home button simultaneously to get into download mode> Connect Your Phone to PC using original samsung usb cable> Open Odin.exe on PC> Make sure your device is added to Odin COMORT> Select BL option in Odin> Add the downloaded Note 5 Stock Bootlogo.tar to BL> Check in odin options only F-Reset and Auto-Reboot enabled, Don't select Re-Partition option> Hit start button> Wait until flashing successful with PASS message> Your device will auto reboot> I think it should boot normally now
3)Test it and Report
4)Kindly Hit Thanks Button If I Helped You
DroidHackeR said:
1)Download Note 5 Stock Bootlogo Odin.tar from below attached Download Link
OP:-
https://forum.xda-developers.com/note5/themes-apps/splash-screen-galaxy-note-5-t3559360
Download Link:-
https://www.androidfilehost.com/?fid=457095661767146761
2)Press Volume Down+Power+Home button simultaneously to get into download mode> Connect Your Phone to PC using original samsung usb cable> Open Odin.exe on PC> Make sure your device is added to Odin COMORT> Select BL option in Odin> Add the downloaded Note 5 Stock Bootlogo.tar to BL> Check in odin options only F-Reset and Auto-Reboot enabled, Don't select Re-Partition option> Hit start button> Wait until flashing successful with PASS message> Your device will auto reboot> I think it should boot normally now
3)Test it and Report
4)Kindly Hit Thanks Button If I Helped You
Click to expand...
Click to collapse
Thank you it working now
Title says it all. But for those that want to know a bit more in detail about what's going on, I tried to install this custom ROM: https://forum.xda-developers.com/t/rom-oneui-2-5-twrp-ncx-2-5-for-a71-sm-a715f.4174135/ Clearly I did something wrong (a bit more clarification in that guide would help people not used to rooting an Android device getting through that process easier), so now I want to go to square 1 by installing the stock ROM again. But the thing is, after installing multidisabler through TWRP, the phone is not permanently stuck into a bootloop and now I can't even go into safemode, nor download mode, and I can't enter the recovery mode, the only thing my phone is capable of doing is to restart by itself by holding the volume down and the power buttons at the same time, and now ADB nor Fastboot can't detect my device (the PC does a Samsung device being connected though, so it's not a hardbrick, I guess).
Samsung devices do not use Fastboot. You should restore through Odin instead.
Try the following:
1. Download Odin on your computer, you can get it from here. Extract it into a folder.
2. Download the firmware for your device. Find out your device model first and then look on http://samfw.com, I've downloaded from there a lot in the past, it works great.
3. Extract the firmware, you should get five files: AP, BL, CP, CSC, and HOME_CSC.
4. Make sure your device is powered off, and press power + volume down + bixby. You should be asked to confirm you want to enter download mode, press the volume up button.
5. Plug your device into the computer, then select the files for all the slots. Use CSC, not HOME_CSC for CSC (CSC is for fresh restore, HOME_CSC is for software update).
6. A device should show in the top bar, something like [COM:6]. This means your device is connected. If it isn't there, make sure your device is plugged in and in Download Mode.
7. Click flash. The firmware should start to flash and there should be a progress bar in Download Mode. Once it's finished your device should reboot into the system.
ChasTechProjects said:
Samsung devices do not use Fastboot. You should restore through Odin instead.
Try the following:
1. Download Odin on your computer, you can get it from here. Extract it into a folder.
2. Download the firmware for your device. Find out your device model first and then look on http://samfw.com, I've downloaded from there a lot in the past, it works great.
3. Extract the firmware, you should get five files: AP, BL, CP, CSC, and HOME_CSC.
4. Make sure your device is powered off, and press power + volume down + bixby. You should be asked to confirm you want to enter download mode, press the volume up button.
5. Plug your device into the computer, then select the files for all the slots. Use CSC, not HOME_CSC for CSC (CSC is for fresh restore, HOME_CSC is for software update).
6. A device should show in the top bar, something like [COM:6]. This means your device is connected. If it isn't there, make sure your device is plugged in and in Download Mode.
7. Click flash. The firmware should start to flash and there should be a progress bar in Download Mode. Once it's finished your device should reboot into the system.
Click to expand...
Click to collapse
Well, trying to reflash everything through Odin has been a thing I tried to do, but how am I supposed to shutdown a phone that is stuck at the Samsung logo (is there any combination to shutdown a Samsung during the boot process?)? And even after that, how am I supposed to press "power + volume down + bixby" if both the power and bixby buttons are the same buttons?
racer21 said:
Well, trying to reflash everything through Odin has been a thing I tried to do, but how am I supposed to shutdown a phone that is stuck at the Samsung logo (is there any combination to shutdown a Samsung during the boot process?)? And even after that, how am I supposed to press "power + volume down + bixby" if both the power and bixby buttons are the same buttons?
Click to expand...
Click to collapse
Long press vol+,vol- and power and in the same time plug in in your pc
geekmaster21 said:
Long press vol+,vol- and power and in the same time plug in in your pc
Click to expand...
Click to collapse
I tried entering Download Mode hours ago, but to no avail. Even before flashing mutidisabler through TWRP (and thus, the phone was working), I had to use ADB in order to make my phone be able to enter Recovery Mode, since the combo for recovery and download mode just made my phone make a loud noise and restart my phone onto safe mode.
Ok, here's an update, apparently pressing those buttons, makes the screen have the same, but at least Odin recognizes the drive, but now I'm stuck at this error: "Complete(Write) operation failed."
Something's weird here, I'm 99.9% sure I did activate USB debugging for this phone, although that was just before wiping the entire drive before the phone got stuck in this loop.
Fixed. Many thanks to @hainguyenthao for helping me out ^^
racer21 said:
Title says it all. But for those that want to know a bit more in detail about what's going on, I tried to install this custom ROM: https://forum.xda-developers.com/t/rom-oneui-2-5-twrp-ncx-2-5-for-a71-sm-a715f.4174135/ Clearly I did something wrong (a bit more clarification in that guide would help people not used to rooting an Android device getting through that process easier), so now I want to go to square 1 by installing the stock ROM again. But the thing is, after installing multidisabler through TWRP, the phone is not permanently stuck into a bootloop and now I can't even go into safemode, nor download mode, and I can't enter the recovery mode, the only thing my phone is capable of doing is to restart by itself by holding the volume down and the power buttons at the same time, and now ADB nor Fastboot can't detect my device (the PC does a Samsung device being connected though, so it's not a hardbrick, I guess).
Click to expand...
Click to collapse
I'm sorry to hear that you had trouble installing the ROM and I'm glad you were able to fix it.
I unfortunately can't see a way that I could make the tutorial on how to install the ROM any easier. I'm almost certain I covered all my bases going over the perquisites and how to install the ROM. I also have a Telegram group in that thread so that users can join if they are ever stuck in any of the steps so that either me or other users that have successfully installed the ROM can help people in doubt since I'm not available 100% of the time. If you ever decide to give it a try again, don't be shy, you can always join the group and request for help.