Hi i have a problem with the statusbar in ViperOne 3.1 RC2
When i push wifi og data button in the statusbar they get grey out and i cant push them again
I have to reboot to get them to work but just once and they get grey out again
Crazymalamute said:
Hi i have a problem with the statusbar in ViperOne 3.1 RC2
When i push wifi og data button in the statusbar they get grey out and i cant push them again
I have to reboot to get them to work but just once and they get grey out again
Click to expand...
Click to collapse
I got that issue also from time to time...but its very rare that it appears.
So I unfortunately cant reproduce it to find the issue and fix it.
could you try to pull a logcat?
VenomTweaks->About->Bugreport:Start recording.
No go to your startusbar and hit the wifi toggle so it gets stuck/greyed out.
Now stop the log by pressing the statusbar notfication. A zip will be created. Send me that zip via pm.
Related
Still in n00b status so i cant post on the dev section.
BT won't turn on on my CM7 EMMC nook.
Tried it in 28, when attempted it stays at "Turning on" for a few seconds but noting.
Same in 29 when I updated to that tonight.
Any tips? I'd really like to start using the WiiController app w/ some NES ROM's for the kids!
Thanks all.
ROM Manager > Fix Permissions
and reboot
centinall said:
ROM Manager > Fix Permissions
and reboot
Click to expand...
Click to collapse
Make sure it's a hard reboot. Holding down power till it shuts off.
I temp rooted my galaxy tab using z4root and decided to delete home launcher because it interfered with me using open home app replacer. Well, i recently did a factory reset and now i cant do anything on my tablet. The screen is black and i cant access anything. PLEASE HELP!
Can you go into Download mode? Or are you sure you have charged the battery? When you connect your charger does the tab display a battery icon?
Well, I'm not sure if this would work but you can try. First make sure you charged the battery.
1. If you can boot the tab normally but after it boots it goes on black screen, then you can try the web version of the market from any computer and then sign in to market.android.com and then send it to your phone.
2. If it doesn't reboot normally, you can go to the CWM and try wiping data and cache or whatever.
3. You can also flash a new rom on the tab from CWM recovery, whether you already have one on the tab, or you can transfer one under the CWM "mount usb device".
4. If all that didn't work, you can do the restocking step from the installation guide on the overcome experience rom web page.
That's all I can think of.
Hope this works out for you and next time before playing with the system files always bake sure of two things. Make a Nandroid backup and make sure you have a working version of the rom you like...
Sent from my GT-P1000 using Tapatalk
yes, my tab is fully charged. When i turn it on it just goes to the blank screen. The problem is i deleted the stock home launcher so now i have no way of doing anything. the only the i can do is put it in recovery mode. I see that i can use my apply sdcard:update.zip to somehow fix it, but i dont know where to get an update.zip.
and my usb connector is broken so i wont be able to use odin.
Is there a way that i can download stock firmware to my memory card (i can put my memory card in my phone) and use the apply sdcard:update.zip function?
i had the same problem and I had to use a friend's PC. It will only take a couple of minutes but that's the only way I know of. May be you can find some official update.zip or some expert have a solution. Sorry for you man.
If there is a program to back up the ROM I have into an update.zip, I'm willing to do it and upload it for you. Is that possible?
There is a "Create an update.zip" option in the Titanium backup. If you can confirm that this option will work as I thought, then I can do it for you...
Can you go into the download mode? (press sound button down-power button)....if so then you can flash any ROM.
If one of you could PLEASE upload an update.zip I WOULD BE VERY GRATEFUL! would I be able to put it in recovery mode and use the apply sdcard:update.zip function with this? my usb connection cord does not work.
i did the same thing. My cousin gave me his rooted galaxy tab before he left and i uninstalled ADW launcher hoping to get the default touchwiz launcher. But he had that removed previously. So now i am only seeing a blacked out screen with only the notification bar at the top.
so, now i can only do the following things:
pull down notification bar from where i can turn on/off the wifi, bluetooth, gps, sound, auto-rotate
long press on the home button to reveal the RECENT APPs dialog and from there go to the samsung task manager.
long press on the search button to reveal the voice search. But that does not work because there is no internet connectivity
i am currently downloading a stock galaxy tab Firmware of 2.3.3 from androidadvices.com which can be downloaded to the device via odin. Still not sure if it can help me come out of my mess right now. However, i think you can use that same .zip firmware to install via sd card from the boot recovery menu.
Check that out.
I've been messing with a lot of options and now when I connect my phone to the PC it gives me the "click" sound but there is no notification on the notification bar , before there was a notification and I could pull down the bar and select charge only disk drive etc...
Now nothing is in the notification bar ... I'm running MikRunny 1.01 ROM
Go to menu >settings>connect to pc and check the ask me check box
Sent from my HTC Incredible S using XDA
Tried that ... still nothing
Imp0stoR said:
Tried that ... still nothing
Click to expand...
Click to collapse
Does the problem remain if you flash another rom?
Nope just flashed a different ROM works ok now
Hi all!
I have huge problems with establishing USB-connection with my I9000 to PC.
I'm using Remics-JB 3.0.1.
When I connect my phone via USB-cable to PC, error message "System-UI needs to be closed" appears. Notification bar is then gone. After 5-10 seconds notification bar is back and it begins with the error message again. This loop continues even when the phone gets disconnected from PC. Only way to end this is a reboot. PC doesn't see the phone at all. On Remics-JB 2.x everything was fine.
I already tried to do one more clean flash (all wipes etc.) and use other kernels. No effect.
I would be grateful if someone could repost this to here: http://forum.xda-developers.com/showthread.php?t=1804032 because I'm not allowed yet to post to devs threads.
Thanks
ddc87 said:
Hi all!
I have huge problems with establishing USB-connection with my I9000 to PC.
I'm using Remics-JB 3.0.1.
When I connect my phone via USB-cable to PC, error message "System-UI needs to be closed" appears. Notification bar is then gone. After 5-10 seconds notification bar is back and it begins with the error message again. This loop continues even when the phone gets disconnected from PC. Only way to end this is a reboot. PC doesn't see the phone at all. On Remics-JB 2.x everything was fine.
I already tried to do one more clean flash (all wipes etc.) and use other kernels. No effect.
I would be grateful if someone could repost this to here: http://forum.xda-developers.com/showthread.php?t=1804032 because I'm not allowed yet to post to devs threads.
Thanks
Click to expand...
Click to collapse
Did you flashed anything after flashing the rom?
FYI - you should have asked the question in q/a section rather than general section.
erpurohit said:
Did you flashed anything after flashing the rom?
FYI - you should have asked the question in q/a section rather than general section.
Click to expand...
Click to collapse
just gapps, nothing more...
try re flashing rom
erpurohit said:
try re flashing rom
Click to expand...
Click to collapse
Done...no changes
did you wipe data or just reflashed...
erpurohit said:
did you wipe data or just reflashed...
Click to expand...
Click to collapse
Data wipe, cache, dalvik - did allof them...also did it before (1st post).
UPD.: I also flashed Circle Battery Mod from Update Me...but on V 2.x everything also worked fine with it...
Just flashed the ROM one more time WITHOUT flashing this Circle battery mode - USB connection is OK!
Never thought this mod would cause such problem
ddc87 said:
Just flashed the ROM one more time WITHOUT flashing this Circle battery mode - USB connection is OK!
Never thought this mod would cause such problem
Click to expand...
Click to collapse
That's what mate the circle mod from update me is old one.... if you want the circle mod then use from from the add on site.
i followed the below thread and i have flashed the latest[27-1-13] stable release of CM10.1 on my galaxy mini.
http://forum.xda-developers.com/showthread.php?t=2085347
I appreciate the great work the developer did. Anyway
1) I am not able to open my default web browser. It shows a white screen for less than a second and disappears.
2) The home button does not show recent apps on long press nor goes to home screen on single press.
3) The phone does not lock at all.
Another small unimportant bug is the settings icon in the quick panel does not work.
Can anyone help me? Thanks in advance.
wipe everything and flash rom, don't flash gapps, reboot.
S5570 to CM10.1
Like me when I flash version Jan-08. So I come back stock 2.3.6. Stock is best ever.
yackovsky said:
wipe everything and flash rom, don't flash gapps, reboot.
Click to expand...
Click to collapse
Thank you!! worked like a charm!!