Here's the original 4.2.2 update for Nordic countries. I think Telenor(N) has it's own, so check that out first.
How to install:
Use Odin. How to install original roms are described a lot of places on XDA.
Your phone needs to be rooted after install. And take backup of all important stuff. Titanium Backup recommended.
LINK
Sorry, as new user I cannot post link. PM me for link if you can post it.
Other countries
Can you PLEASE add other regions . i really need europe . (belgium,netherlands,...)
Related
:cyclops:Hello friends of XDA
I recently saw a post on how to install INTETRNET JELLY BEAN (XXLRU) IN GALAXY NOTE N-7000.
My question is: THIS SOFTWARE SAYS BE FOR EUROPE, TO BE MORE SPECIFIC TO COUNTRIES United Kingdom, Germany, France, Spain, Austria, Belgium, Italy Etc. THAT MAY AFFECT ME if you installed it, I AM FROM MEXICO AND MY OPERATOR IS TELCEL?
IN FACT HAVE INSTALLED THE SOFTWARE FROM GERMANY XXLRQ ICS 4.0.4.
THANK YOU FOR YOUR ATTENTION AND here are the links where I saw him.
http://www.vickyz.com/how-to-update-galaxy-note-n7000-xxlru-android-4-1-4-latest-official-firmware/
xtc218 said:
:cyclops:Hello friends of XDA
I recently saw a post on how to install INTETRNET JELLY BEAN (XXLRU) IN GALAXY NOTE N-7000.
My question is: THIS SOFTWARE SAYS BE FOR EUROPE, TO BE MORE SPECIFIC TO COUNTRIES United Kingdom, Germany, France, Spain, Austria, Belgium, Italy Etc. THAT MAY AFFECT ME if you installed it, I AM FROM MEXICO AND MY OPERATOR IS TELCEL?
IN FACT HAVE INSTALLED THE SOFTWARE FROM GERMANY XXLRQ ICS 4.0.4.
THANK YOU FOR YOUR ATTENTION AND here are the links where I saw him.
http://www.vickyz.com/how-to-update-galaxy-note-n7000-xxlru-android-4-1-4-latest-official-firmware/
Click to expand...
Click to collapse
There is no JB update available for Note yet, the information in that link is incorrect.
And it's mentioned in the same link that it's 4.0.4
"Select files that you have to flash or install on your phone, files found from the extracted files after download of Android 4.0.4 N7000 XXLRU"
I don't think that software was really jellybean. As far as I know there is no official jelly bean update for N7000 yet. If I was you I wouldn't flash it, go with an unofficial build in android development section. As for language, you can select on boot so shouldn't matter, but I would still stay away from this '4.1.4 leak'
Edit: was beaten to it ^^ as jeetu1981said ^^
jeetu1981 said:
there is no jb update available for note yet, the information in that link is incorrect.
And it's mentioned in the same link that it's 4.0.4
"select files that you have to flash or install on your phone, files found from the extracted files after download of android 4.0.4 n7000 xxlru"
Click to expand...
Click to collapse
that's why i go with the experts
thanks for the help
I'll be brave and try it out. YOLO? lol
I'll be brave and try it out guys, backing up my phone as we speak, I'll update you with screenshots if it actually works.
Hopefully this won't brick my phone (I've fixed quite a few bricked phones in the past so I should be alright)
drewzxx said:
I'll be brave and try it out guys, backing up my phone as we speak, I'll update you with screenshots if it actually works.
Hopefully this won't brick my phone (I've fixed quite a few bricked phones in the past so I should be alright)
Click to expand...
Click to collapse
we'll don't say you were not warn.... no matter how techie you are... there are always things that gets out of your hands...
Fail
Didn't get to flash the rom. After the download finished, I extracted file and found out they've got the wrong files for odin..not even the right files for flashing through cwm
True that
letters_to_cleo said:
we'll don't say you were not warn.... no matter how techie you are... there are always things that gets out of your hands...
Click to expand...
Click to collapse
Yes, I do understand the consequences, but I just wanted to try it out since no one seemed to have tried it yet and see if the leak is legit. If all else fails I'll just claim insurance for it.
Already such experiment was made with
Odin
CWM
Mobile Odin
Nothing was useful, and this kind of thread already burried 2 days ago.
seems to be an OTA update?
there's none ever official JB release yet. I bet Official JB would come perhaps early next year.. I doubt it'll be primed for this year as there's still too much devices that needs to be upsold and marketed (with official stock JB already, e.g. Note 2). Once the new stocks are being sold in the mainstream... then that will be the time the official JB would be released.
Hello guys,
I wanna go back to a german stock rom as well as my black needs to go to service.
Unfortunately, the major or only source for LG stock roms that I am aware of and which is given here in several threads is off (...lg-phone-firmware.com...) would actually post the entire link if I could
So do you know if there is another one? Specifically I am after the German 1&1 branded stock - so if someone please could help, that be fantastic! THanks!
CHeers,
cesar
csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI&model=LGP970&country=ID®ion=A
Replace "IMEI" with your IMEI number, it should give you a download link of the latest software available for your region.
cesar2k said:
Hello guys,
I wanna go back to a german stock rom as well as my black needs to go to service.
Unfortunately, the major or only source for LG stock roms that I am aware of and which is given here in several threads is off (...lg-phone-firmware.com...) would actually post the entire link if I could
So do you know if there is another one? Specifically I am after the German 1&1 branded stock - so if someone please could help, that be fantastic! THanks!
CHeers,
cesar
Click to expand...
Click to collapse
You can simply do a "Notfallwiederherstellung" (emergency recovery) in the B2C tool. Then it should flash the latest version available for you to your phone, cause you have to enter IMEI and SN. But do a factory reset afterwards
Hi
Optimus rookie time. I have tried to understand from the faq but no one has answered this specifically that I can see. I'm in Australia, I have got an O4X from Kogan. It has arrived and has lots of Asian menu's, I have no idea if Taiwan, China or Singapore perhaps so far. It has lots of apps with 'hama' in the names if that helps. This is what is listed in about phone:
Software version: LG-P880-V10d-OCT-16-2012
Build number: IML74K
Baseband version: L6260_MODEM_SIC_02.1216.01
Kernal: 2.6.39.4
I would like to try JB, I get some people hate it, some say it is ok. If not, back to ICS or CM. Which JB firmware do I go for, the euro version or must I get the right regional version for my phone?? If so, can anyone tell what is is or is all that is important is v10d?
Thanks for any advice
Hi. I also got my 4X from Kogan, so I've been through the issues you've mentioned.
First thing I did was update to 4.1.2. I didn't spend any time with ICS, so I can't comment on differences - I WANTED JB and that was that! :cyclops: To update to 4.1.2, I used the LG update software – info about this procedure is here: http://forum.xda-developers.com/showthread.php?t=2069723
To check which version of the LG software to use, I used this URL: http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=
You need to put your IMEI (from Settings / About phone / Phone identity) in the url after "?esn=", and it returns the URL of the software you should download to update your phone. That told me to use the Taiwan version - I don't know if others (eg Europe) are compatible with our hardware - would be interested to hear!
2nd step was to root the phone (as an Aussie, you need to ignore the obvious sexual joke in that phrase!) – I used the instructions at http://forum.xda-developers.com/showthread.php?t=2180688 with some help from the better English at http://www.lg-phones.org/how-to-root-lg-optimus-4x-hd-android-4-1-jelly-bean.html [NB – the comment below this points out some errors].
The next step was to install Titanium Backup and use it to remove all the non-English apps. I had no problems with that step, so whatever they are, they're not critical.
G'day, nice one. Will look into links later. Appreciate the reply
Thinking about this a bit more, if you only want to flash the "official" (Taiwan, in your case) updated firmware for your phone, you can use the LG Update tool "as is". The instructions in my earlier post can be used to flash other versions and a lot of people seem to be using the Euro 20A. I'm out of my depth here though, so hopefully someone else can confirm:
Can any version (ie any country) firmware be flashed onto any 4x?
Ok, all done. Running jelly bean fine. Think it better than ics, using iodak kernel. Thanks for help. If anyone comes across this thread, when flashing to jb using kdz, the 100‰ battery is essential before flashing
359 said:
Ok, all done. Running jelly bean fine. Think it better than ics, using iodak kernel. Thanks for help. If anyone comes across this thread, when flashing to jb using kdz, the 100‰ battery is essential before flashing
Click to expand...
Click to collapse
Which version (country) did you use?
Taiwan as lg link suggested to. Running fine, not sure why so many knock it!
I would like to request a download for the Jelly Bean firmware for Galaxy Note 1 (United Arab Emirates Version) ... I tried links from Sammobile.com, but it leads to a hotfile.com link to download which eventually says, "Your download had expired, try again later" .
Help anyone ?
I need the UAE version because I want arabic for samsung keyboard to be installed... Is there any other way to do it besides installing the ROM ? Note: I dont know how to root
Please try the torrent link for the UAE stock Rom in the torrent thread.
If you do not know how to root and if your are too lazy to start reading tutorials here: then don't root and stay with the stock Rom.
Our baby at home started to eat alone after one and a half year - many "consumers" of XDA need spoon feeding for a much longer time. So you shouldn't raise that counter.
We need a thread where we can post Links of the latest OTAs. This is not a root discussion thread. This is no a custom FW thread. This is for Official OTAs sent out by carriers to be sideloaded in stock recovery. If you don't know how to do this then don't try. I'm not responsible for anything that happened to ur device.
When posting please include:
Link
MD5
Version that was installed before the OTA so we know what FW you came from
Carrier
Region
Model Number