Database Develop

[Q] Galaxy Tab not booting, stuck at boot screen, download mode working

My Tab is stuck at GalaxyTab Samsung" boot screen after i try to flash Roto-JMI-v2, before i was running Overcome v1.1.2 rom and [Kernel] [EURO] [1.4ghz OC/UV] MCR EXT4 v12 and it work like a charm. But becurse i deside to sell my TAB i flash back to Roto JMI.
I flash with Odin 1.7 with success, but now it stuck at boot logo.
After that I try many other ROM and flash with Heimdal but no lock.
I have no problem to get download mode, and flash with odin and Heimdal. But I can't get into recovery mode (power+vol up)
I have try almost every solution in the Forum...
What to do next...??

Have you tried flashing kernel only? like the overcome kernel v1.0?
Perhaps that will get you ClockWorkMod Recovery back...and you can go from there.

I try it now, shall i use odin or Helmdall to flash kernel only

With overcome kernel v1.0 it fail in Odin

That's odd. Odin should flash the kernel fine.
Does it give an error? or it just says successful, but you still cannot get into CWM?

It give a error, and I still cannot get into CWM, shall i use a pit to flash

And I have try this....
1.Get a stock rom package (any of Rotohammer's firmwares will work)
2.Get P1_add_hidden.zip attached to this post and extract the P1_add_hidden.pit file
3.Using Odin 1.7, put stock rom (Roto-JME-Full-v4.tar for example) in PDA slot.
4.Put P1_add_hidden.pit in Pit slot
5.Check repartition box
6.Put Tab in download mode by holding Volume Down and Power, connect to the computer, and press start.
7.After this, the Tab will reboot normally. Shut it down and return to download mode.
8.Open Odin 1.7 and reconnect the Tab.
9.In the PDA slot, choose the Overcome Kernel v2.0 tar file for use with Odin. Press start
10.It will flash the kernel then reboot. Upon reboot, you should hear the sexy robot voices informing you of the status of the EXT4 conversion.
11.Once done, the Tab will boot normally. At this point you can load Overcome v1.2.2 rom (or any other Rom of your choosing)
12.NOTE - Overcome 1.2.2 includes v2.0 of the kernel, so no reflashing is required after install.

Hi,
I try this from Samsung stock ROM P1000JK5 and i stuck on the Samsung boot imge. Can i only upgrade to kernel 2 when i have a JM* (Rotohammer rom?)

This is very weerd, other with some god solution

NN1123 said:
This is very weerd, other with some god solution
Click to expand...
Click to collapse
You are correct - he needs to repartition the sd card, using the .pit file because it was formatted to ext4.
Your steps are great! I do them one at a time with a reboot between each one.

sreins said:
Hi,
I try this from Samsung stock ROM P1000JK5 and i stuck on the Samsung boot imge.
Click to expand...
Click to collapse
Oops - if you got your rom from samsung you have a locked bootloader. You can continue to flash those updates, or you can use a patch to remove the lock, then you can continue on.
Can someone please paste the link to the patch?

how about the Verizon gtab...
same thing is happening to me on the galaxy tab from verizon... samsung says to send it.. but i dont want to wait two weeks without my tab... thanks..

Stuck in Bootup Screen
I also have same problem,
I flashed a Rom from "samfirmware" and after it finished it stuck on bootup screen, unable to do recovery mode.
only goes to bootup screen or Dawnload .
can you guys help ?

You gentlemen have a locked bootloader. If you search the tab development forum you will find the solution. A member named Chainfire developed an app you download to your sd card, then install it, then run it, and it will move the offending bootloader. I can't get the link here - google "locked bootloader patch" or posts by Chainfire.
When it is removed, don't flash roms with the samsung kies - all those roms have the locked bootloader.

Stuck in Bootup Screen
thanks
but I can not get the tab to load in order to run any app. it is stuck in boot screen. any suggestion ?

You cannot get into download mode? That is power + volume down.
Do you know of the adb program?

stuck on bootup screen
I havent used ADB before.
any other solution?

rangercaptain said:
You gentlemen have a locked bootloader. If you search the tab development forum you will find the solution. A member named Chainfire developed an app you download to your sd card, then install it, then run it, and it will move the offending bootloader. I can't get the link here - google "locked bootloader patch" or posts by Chainfire.
When it is removed, don't flash roms with the samsung kies - all those roms have the locked bootloader.
Click to expand...
Click to collapse
how install apk boot pacth phone only samsung logo or only enter download mode how install boot patch ?

newbie comes here to learn how to flash kernel.

[Q] GT-N7000 Stuck in loop at Samsung splash (boot screen)

I was trying to install a stock ROM using PC Odin as I done many times before after taking it from stock to root using the CF-Root method. I wiped my data and install the stock ROM using PC Odin and got a PASS. It went through the install package screen and reboot. Now, however, I get the Samusng boot screen animation all the way to the glowing SAMSUNG and then it loops endlessly . PLEASE HELP. Was trying to install the Carphone Warhouse 2.3.6 November 2011 (N7000XXKKA_N7000CPWKK3_CPW) ROM. Using an Internation Samsung Galaxy Note GT-N7000.

TXBrnNRaised said:
I was trying to install a stock ROM using PC Odin as I done many times before after taking it from stock to root using the CF-Root method. I wiped my data and install the stock ROM using PC Odin and got a PASS. It went through the install package screen and reboot. Now, however, I get the Samusng boot screen animation all the way to the glowing SAMSUNG and then it loops endlessly . PLEASE HELP. Was trying to install the Carphone Warhouse 2.3.6 November 2011 (N7000XXKKA_N7000CPWKK3_CPW) ROM. Using an Internation Samsung Galaxy Note GT-N7000.
Click to expand...
Click to collapse
Go to recovery and wipe cache and format data and reboot.

I can access Download (Odin) mode. No custom ROM was installed, just stock ROM that I could later root. Reads as follows:
ODIN MODE
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD: YES (1 counts)
CURRENT BINARY: SAMSUNG OFFICIAL

Found Chainfire's post in the SGSII forums about TraingleAway. I just used the param.tar file for PDA in PC Odin and now I can boot again.
FYI I had tried using Q1_20110914_16GB.pit and a stock ROM in PC Odin and the re-partition function with no luck prior to this.
All is well. Thanks to Chainfire a.k.a. one of XDA's greatest members.

Now trying to work around the 'logo_q1.jpg' draw failed issue. Found post here. Hopefully it works.

Resolved. Flash back to a stock ROM using PC Odin.

please help
Okay.. So my phones on bootloop and ahh i dunno what to do..
ODIN MODE
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : YES (2 COUNTS)
CURRENT BINARY : CUSTOM
What should i do? im so lost..please..someone..

try flash full wipe firmware
phone+csc+pda
prefarably GB
And let us if that sort u out

It's been a while but I believe I had to use PC Odin and do as ac-milan is suggesting. Find a stock ROM (I thinK I used a Carphone one) and flash phone+csc+pda. Might try the param.tar file under PDA too. Can't remember if I tried it solo or with other files. Trial and error.

Galaxy S ODIN Flash

Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs

Hi there,
afaik there are no CM Versions flashable via ODIN.Use ODIN to flash a Stock firmware, then install ClockworkModRecovery and Install CM9 via CWM.
You should try to take Out your Battery for about 5 minutes and try to enter Recovery Mode.
About the Odin Version: If you look at different "howto use ODIN tutorials" there are different Versions "recommended" I've used multiple ODIN Versions eg 1.3 / 1.83 and every Version made a good job.
Give this a try if Battery-out for 5 Minutes does't take you back to recovery
http://hdtechvideo.com/community/index.php?threads/flashing-rom-using-odin-step-by-step.64/
Regards
Geniac
Opson said:
Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs
Click to expand...
Click to collapse

Opson said:
Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs
Click to expand...
Click to collapse
you should flash the stock rom got 3 type file, that mean the file after download got pda, csc and modam file, like 2.3.6 XXjvu, please dont flash the file after download only have 1 file only, like XXjw5.

little help galaxy s

hallo all
I got a problems with my phone
I have a galaxy S i9000
but I have format the system on this phone
now my phone will boot till galaxy boot animation then it will restart every time
when I download stock firmware from Samsung install true odin
phone will boot to boot animation from Samsung and restart every time
I can go to recovery menu and download mode
wat need I to do get this thing working again ?
tnxk for all help

sjoerdvz said:
hallo all
I got a problems with my phone
I have a galaxy S i9000
but I have format the system on this phone
now my phone will boot till galaxy boot animation then it will restart every time
when I download stock firmware from Samsung install true odin
phone will boot to boot animation from Samsung and restart every time
I can go to recovery menu and download mode
wat need I to do get this thing working again ?
tnxk for all help
Click to expand...
Click to collapse
Hi there. When my phone couldn't boot up, I used odin. I downloaded the XXJW4 files for ODIN and I managed to install it. I rooted my phone and then I could put a Jelly Bean rom on it Please try it and tell me!

galaxy s
PRODIGSTAR said:
Hi there. When my phone couldn't boot up, I used odin. I downloaded the XXJW4 files for ODIN and I managed to install it. I rooted my phone and then I could put a Jelly Bean rom on it Please try it and tell me!
Click to expand...
Click to collapse
I have download XXJW4 but no luck
I try it with the PIT file for this phone and my phone are now working
I have formatted the internal partitions that was the problems the PIT file make some new partitions

Sorry..
Sent from my GT-I9300 using xda app-developers app

Help me please. My Samsung Galaxy Ace...

Hello. Can you help me? This is what happens:
I tried to upgrade my SGA into Gingerbread 2.3.6 ( my SGA is froyo 2.2.1) . I install ClockWerkMod 5.0.2.6 in my cellphone. It was installed successfully, but after that i go back to the recovery mode, then i stuck in the Samsung Logo and i don't know why, (my cp is already rooted).
I can go to download mode, but the problem is, 1 month ago, after installing CWMode, i decided to factory data reset to fix the problem in the recovery, and now , i cant open my SGA, i tried to flashed it in the Odin, but it says "fail", and now im so nervous, i don't know what to do, hope someone help me with my problem. Thank you
ChrisZkie

ChrisZkie said:
Hello. Can you help me? This is what happens:
I tried to upgrade my SGA into Gingerbread 2.3.6 ( my SGA is froyo 2.2.1) . I install ClockWerkMod 5.0.2.6 in my cellphone. It was installed successfully, but after that i go back to the recovery mode, then i stuck in the Samsung Logo and i don't know why, (my cp is already rooted).
I can go to download mode, but the problem is, 1 month ago, after installing CWMode, i decided to factory data reset to fix the problem in the recovery, and now , i cant open my SGA, i tried to flashed it in the Odin, but it says "fail", and now im so nervous, i don't know what to do, hope someone help me with my problem. Thank you
ChrisZkie
Click to expand...
Click to collapse
Factory reset won't recover you from recovery problem
Try:
Remove the battery for 5-10 mins. Then reboot
Code:
adb reboot
from your pc in recovery/download mode
I think that there is a problem with CWMode. I dunno what is that.
Also you need the following to flash stock ROM only on Samsung Galaxy Ace:
The files I have attached(Unzip them).
Proper Gingerbread ROM for your region(I live in India so I have Indian ROM)
Download from SamMobile
In Odin select OPS Cooper_v1.0.ops
Select all the options except Debug only.
Click 'One Package' button and select the ROM file(it is generally .tar.md5 and India's one is 238MB)
Click 'Start'
Best of Luck