Firmware Request - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

can anyone please root this FIRMWARE.Thanks and more power in advance
Region : KSA
PDA : I9070JPLK2
PHONE : I9070JPLK2
CSC : I9070OPLI1
this is my last chance to root my phone without increasing its binary counter..i have use this http://forum.xda-developers.com/showpost.php?p=44648757&postcount=272 and it success and change my phone's kernel but it doesnt have SU in my phone's menu so i download SU in playstore then after i install it says that my device is not rooted ..when i go to download mode i see my binary counter has 1..please help me..thanks in advance

clerfa21 said:
can anyone please root this FIRMWARE.Thanks and more power in advance
Region : KSA
PDA : I9070JPLK2
PHONE : I9070JPLK2
CSC : I9070OPLI1
this is my last chance to root my phone without increasing its binary counter..i have use this http://forum.xda-developers.com/showpost.php?p=44648757&postcount=272 and it success and change my phone's kernel but it doesnt have SU in my phone's menu so i download SU in playstore then after i install it says that my device is not rooted ..when i go to download mode i see my binary counter has 1..please help me..thanks in advance
Click to expand...
Click to collapse
You know, you could update to JB and this would be a lot, lot simpler.
On topic: sorry, i don't have rooted GB firmwares with me.

clerfa21 said:
can anyone please root this FIRMWARE.Thanks and more power in advance
Region : KSA
PDA : I9070JPLK2
PHONE : I9070JPLK2
CSC : I9070OPLI1
this is my last chance to root my phone without increasing its binary counter..i have use this http://forum.xda-developers.com/showpost.php?p=44648757&postcount=272 and it success and change my phone's kernel but it doesnt have SU in my phone's menu so i download SU in playstore then after i install it says that my device is not rooted ..when i go to download mode i see my binary counter has 1..please help me..thanks in advance
Click to expand...
Click to collapse
If you installed both kernels (root and CoCore) you would have binary counter 2.And you have 1. You are sure that you installed both?

harith.unnikrishnan said:
You know, you could update to JB and this would be a lot, lot simpler.
On topic: sorry, i don't have rooted GB firmwares with me.
Click to expand...
Click to collapse
sir my phone doesn't have a jellybean update..anyway thank you for your reply here..

shut_down said:
If you installed both kernels (root and CoCore) you would have binary counter 2.And you have 1. You are sure that you installed both?
Click to expand...
Click to collapse
should i install it both?
so this are the steps :
1. Download rootkernel.tar.md5 and GT-I9070-Kernel-CoCore.tar.md5.
2. Run program Odin3 v1.87.exe.
3. Then open Settings in your phone, go to Applications -> Development and check USB Debugging and Allow mock locations. Both needs to be Checked (Selected).
4. Turn off phone and turn it back on into Download mode, like this press Volume Down + Home button + Power button, wait until some "strange" screen appears, put in usb cable and choose continue.
5. Now wait until Odin recognize your phone.
6. Under PIT file browse for GT-I9070_EUR_XX_8G.pit.
7. Under PDA choose rootkernel.tar.md5.
8. Then check what options are checked (Selected), be sure to UNCHECK (remove selection) Re-Partition, Flash Lock, Phone EFS Clear, Phone Bootloader Update! Only Auto Reboot and F.Reset Time should be checked (Selected).
9. When this is set just press Start and wait for phone to reboot.
10. Now repeat steps from 4 to 9, with one exception at step 7 now choose GT-I9070-Kernel-CoCore.tar.md5.
11. Download and install Superuser or SuperSU aplication from market.
am i right this time sir?

clerfa21 said:
should i install it both?
Click to expand...
Click to collapse
Do you have root now? I wrote on two threads about that, can't remember if it was you on other user that told he has root now.
In short you need to do this:
Install Root kernel in Odin, reboot to system.
Go to Download mode again and install CoCore kernel.
Install SuperSU from play store and open it. Done.

shut_down said:
Do you have root now? I wrote on two threads about that, can't remember if it was you on other user that told he has root now.
In short you need to do this:
Install Root kernel in Odin, reboot to system.
Go to Download mode again and install CoCore kernel.
Install SuperSU from play store and open it. Done.
Click to expand...
Click to collapse
yes sir thats me ..i am now rooted but i use sir diego's kernel HERE..is it ok or should i flash my phone again to your CoCore kernel?

clerfa21 said:
yes sir thats me ..i am now rooted but i use sir diego's kernel HERE..is it ok or should i flash my phone again to your CoCore kernel?
Click to expand...
Click to collapse
What kernel is written in About phone (in settings)? Install CoCore , that root kernel has some bug, so you better use CoCore for GB (from that link).

shut_down said:
What kernel is written in About phone (in settings)? Install CoCore , that root kernel has some bug, so you better use CoCore for GB (from that link).
Click to expand...
Click to collapse
2.6.35.7-TWRP+
[email protected] #2
SMP PREEMP Thu Sep 6 10:20:13 BRT 2012
how to do that sir?

can anyone plzz tell me how to flash JB firmware using fastboot in sgsa... and where can i get the firmware image files for fastboot...!! plzz help i am stuck in the boot screen and i have tried everthing including facory reset and odin doesnt work with me... so only option is fastboot

clerfa21 said:
2.6.35.7-TWRP+
[email protected] #2
SMP PREEMP Thu Sep 6 10:20:13 BRT 2012
how to do that sir?
Click to expand...
Click to collapse
You did not install CoCore, that is the ROOT kernel. Now install CoCore with Odin. Link is in that thread I posted you.

shut_down said:
You did not install CoCore, that is the ROOT kernel. Now install CoCore with Odin. Link is in that thread I posted you.
Click to expand...
Click to collapse
after i flash CoCore this is my kernel now
2.6.35.7-CoCore-DroidAdvance+
[email protected] #2
SMP PREEMPT Sun Oct 21 18:27:46 CST2012
is this right sir?after i flash what should i do now?

clerfa21 said:
after i flash CoCore this is my kernel now
2.6.35.7-CoCore-DroidAdvance+
[email protected] #2
SMP PREEMPT Sun Oct 21 18:27:46 CST2012
is this right sir?after i flash what should i do now?
Click to expand...
Click to collapse
Enjoy.
You can install Cpu No Frill paalication from play store. And change governor to PegasusQ and IO sceduler to SIO.
Sent from my GT-I9070 using Tapatalk

shut_down said:
Enjoy.
You can install Cpu No Frill paalication from play store. And change governor to PegasusQ and IO sceduler to SIO.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Thank you sir ..
i am planning now to upgrade my 2.3.6 firmware to 4.1.2..will this GUIDE can help me do that?
another question is it ok to flash different firmwares?like my firmware is I9070JPLK2(2.3.6) from KSA to I9070XXLQE(4.1.2) from TSR?

clerfa21 said:
Thank you sir ..
i am planning now to upgrade my 2.3.6 firmware to 4.1.2..will this GUIDE can help me do that?
another question is it ok to flash different firmwares?like my firmware is I9070JPLK2(2.3.6) from KSA to I9070XXLQE(4.1.2) from TSR?
Click to expand...
Click to collapse
You can use that guide. And you can use other firmware. Just do not use one from HONKONG, you can't go to any other after installing it (as some users said).

shut_down said:
You can use that guide. And you can use other firmware. Just do not use one from HONKONG, you can't go to any other after installing it (as some users said).
Click to expand...
Click to collapse
can i use the latest odin3v1.8?
how about the kernel?what kernel should i install if i am going to root 4.1.2?

I am not sure which Odin I have used and I am on my cell now. I would recomend cocore again, just new version for JB. See my sig for link. Root on JB is much easier than GB. Just look for root JB thread by shaan. It is as simple as flashing root.zip in recovery mode (volup+home+power)
Sent from my SGS Adv. using xda-developers app.

clerfa21 said:
can i use the latest odin3v1.8?
how about the kernel?what kernel should i install if i am going to root 4.1.2?
Click to expand...
Click to collapse
We have much easier rooting method for JB. Just install root zip from recovery. No need to use Odin for root. It is all explained in that guide. You can use that Odin.

shut_down said:
We have much easier rooting method for JB. Just install root zip from recovery. No need to use Odin for root. It is all explained in that guide. You can use that Odin.
Click to expand...
Click to collapse
i mean after i root can i use this KERNEL?or you can suggest me a better kernel?

th3cr0w said:
I am not sure which Odin I have used and I am on my cell now. I would recomend cocore again, just new version for JB. See my sig for link. Root on JB is much easier than GB. Just look for root JB thread by shaan. It is as simple as flashing root.zip in recovery mode (volup+home+power)
Sent from my SGS Adv. using xda-developers app.
Click to expand...
Click to collapse
can you suggest me a best kernel to install?

Related

Need Step by Step Procedure for Root + CWM on LA4

Can anyone guide me step by step procedure to root and install CWM on XXLA4 ROM, i havnt rooted my phone yet. and binary counter should not get effected.
Thanks in advance. i dint find any simple procedure.
ranjan.alva said:
Can anyone guide me step by step procedure to root and install CWM on XXLA4 ROM, i havnt rooted my phone yet. and binary counter should not get effected.
Thanks in advance. i dint find any simple procedure.
Click to expand...
Click to collapse
you on LA4?? you cant root LA4 you have to be on lower firmware then root and then upgrade to LA4
abhi98228 said:
you on LA4?? you cant root LA4 you have to be on lower firmware then root and then upgrade to LA4
Click to expand...
Click to collapse
k. am downgrading Firmware to KL3 , and i need procedure. but mainly it should not effect binary counter.
It's not possible to root LA4 directly at the moment, so you'll need to downgrade your device first:
- Download a firmware that's rootable from here.
- Download Odin from the link provided above
- Enter "Download Mode" on your device by shutting your Note completely off, then press and hold Volume Down + Home button + Power button
- Start Odin
- Unzip the firmware (the zip file you just downloaded), and you'll end up with a md5-file
- Go to Odin and click "PDA" and choose the md5-file
- Press "Start"
- Wait
- Done
Now you can root the device and get CWM, so go to this thread and do the "I Want ROOT + CWM" at the end of the first post.
- After you're rooted download LA4 again from the first link in this post
- Transfer it to your Note
- Open CWM on your Note
- Flash it
Done. You now have a rooted LA4.
LordManhattan said:
It's not possible to root LA4 directly at the moment, so you'll need to downgrade your device first:
- Download a firmware that's rootable from here.
- Download Odin from the link provided above
- Enter "Download Mode" on your device by shutting your Note completely off, then press and hold Volume Down + Home button + Power button
- Start Odin
- Unzip the firmware (the zip file you just downloaded), and you'll end up with a md5-file
- Go to Odin and click "PDA" and choose the md5-file
- Press "Start"
- Wait
- Done
Now you can root the device and get CWM, so go to this thread and do the "I Want ROOT + CWM" at the end of the first post.
- After you're rooted download LA4 again from the first link in this post
- Transfer it to your Note
- Open CWM on your Note
- Flash it
Done. You now have a rooted LA4.
Click to expand...
Click to collapse
Thanks for Reply and i want to make sure whether this method adds binary count or not.
ranjan.alva said:
Thanks for Reply and i want to make sure whether this method adds binary count or not.
Click to expand...
Click to collapse
No it won't.
Just make 1 thing clear. binary count raise only, If you flash any custom ROM/Kernel with PC Odin.
Follow LordManhattan's advise and still once refer Installation guide in detail in post #2 n 3 of this thread http://forum.xda-developers.com/showthread.php?t=1424997
Just to add, Downgrade Firmware shud be direct rootable. (before KL7), N if particularly i specify, I can say Downgrade first to indian ROM KL1, I have flashed this ROM in at least 5 Notes.
That means Flashing Custom ROM using CWM doesn't effect Binary Count rite??
if you flash using CWM or mobile odin it wont if you do using oding from PC it will still not sure about official firmware
ranjan.alva said:
That means Flashing Custom ROM using CWM doesn't effect Binary Count rite??
Click to expand...
Click to collapse
I'll make it easy for you: No it doesn't effect the binary counter
Partial CWM?
LordManhattan said:
It's not possible to root LA4 directly at the moment, so you'll need to downgrade your device first:
- Download a firmware that's rootable from here.
- Download Odin from the link provided above
- Enter "Download Mode" on your device by shutting your Note completely off, then press and hold Volume Down + Home button + Power button
- Start Odin
- Unzip the firmware (the zip file you just downloaded), and you'll end up with a md5-file
- Go to Odin and click "PDA" and choose the md5-file
- Press "Start"
- Wait
- Done
Now you can root the device and get CWM, so go to this thread and do the "I Want ROOT + CWM" at the end of the first post.
- After you're rooted download LA4 again from the first link in this post
- Transfer it to your Note
- Open CWM on your Note
- Flash it
Done. You now have a rooted LA4.
Click to expand...
Click to collapse
Yep, this is what I did after going through Dr. Ketans post. I now have rooted LA4 , but my CWM app and recovery is only partial. I do not have option to do backup/restore on CWM on LA4. Is it a universal problem? Any ideas?
prasad.adam said:
Yep, this is what I did after going through Dr. Ketans post. I now have rooted LA4 , but my CWM app and recovery is only partial. I do not have option to do backup/restore on CWM on LA4. Is it a universal problem? Any ideas?
Click to expand...
Click to collapse
Go to 1st link of my signature 'how to root.." select I have LA4 kernel scenario, download it and reflash kernel, select I am already rooted. it takes just few seconds
dr.ketan said:
Go to 1st link of my signature 'how to root.." select I have LA4 kernel scenario, download it and reflash kernel, select I am already rooted. it takes just few seconds
Click to expand...
Click to collapse
Thanks ketan for the response. Will give it a try soon and revert.
Edit: worked like a charm.
Sent from my GT-N7000 using Tapatalk
Hey,
Dr.Ketan, can you tell me please if there is a chance to root the original LA4 (never changed rom) if I don't have access to a Windows and only to a Mac?
I only want to root it for the basic tweaks and apps. Don't need a custom rom at the moment. I want to root it and use it as is while I wait for the official ICS.
Thanks.
There is no Queston of window or Mac,LA4 is non rootable, to get root, first u need to downgrade older rom.
Sent from my GT-N7000 using xda premium
dr.ketan said:
There is no Queston of window or Mac,LA4 is non rootable, to get root, first u need to downgrade older rom.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks. I got ahead of the events. I didn't meant that. I meant if I can do the procedure of downgrading and everything I might need to do in order to root or to install a custom rom or another stock using ONLY my Samsung Note and a Mac.
Q1: I can downgrade using a exclusively a Mac with Lion on it?
Q2: If the answer to Q1 is affirmative, can I root it after downgrade also using only Lion on Mac?
Thanks again!
I have never heard mac pc odin. Plz google for it. So without pc odin you cant downgrade.
Yes there was review i read, got root with mac. You just read my thread how to root...(u may find from my signature), i remember i have post a link somwhere, how to root using mac.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Yes there was review i read, got root with mac.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes, I saw there was one root with mac solution, but works only if the Note is rootable. LA4 is not. So I must downgrade first. )))))
Nevermind, I'll try to do it with Windows, somehow. Thanks!
I am also new to this, and this thread is very clear. The bit I do not understand is what Kernal I should be running. Custom roms available can have a variety of kernals e.g LA3, LA4 etc. Do i have to choose a rom that has a kernal compatible with my phone? is there some rational to running one kernal vs another? I notice that it may be possible to flash a rom and keep a previous kernal e.g a CF kernal. is this advisable? your advice would be very welcome.
You don't need to flash a new kernel. Most of the custom ROMs includes a custom kernel that's good enough, but if you're interested in testing a few of them then you can do it without any problems.
LordManhattan said:
- After you're rooted download LA4 again from the first link in this post
- Transfer it to your Note
- Open CWM on your Note
- Flash it
Done. You now have a rooted LA4.
Click to expand...
Click to collapse
Now is when I am lost. I did all the above (thanks, by the way) and I run KKA now. I had LA4 (Germany) when bought it, then downgraded to root.
Now I am rooted but when I try to update firmware with CWM, nothing happens. I have to put the ZIP in the Note or the MD5? I tried with the MD5 two times.
Is there something I do wrong? Is any other method apart from CWM? I mention that when I downgraded and first booted, CWM said something about "not being compatible and some functions were disabled".
Any ideas?
EDIT:
I couldn't work it out as expected and I went back to my original LA4 (Germany).

Easiest Rooting Method for Galaxy note every Firmware (GB & ICS)-Rooting Only No CWM

Easiest Rooting Method for Galaxy note every Firmware (GB & ICS)-Rooting Only No CWM
More than one post on this
~~~THREAD CLOSED~~~
this is not my method just found this in the forums and wanted to share.
the credits are to the original developer dr.ketan .
This is the Easyest Method Without kernel flashing and Yes -- No Triangle
Confirmed Working and Tested on latest official LPY.
1- Flash any Stock firmware with PC or Mobile Odin
2- Let the phone is completly boot
3- Copy CWM.zip and Superuser busybox installer into the root of memory card
4- reboot into stock revovery
5- select update from zip and then slect the cwm.zip file
6- after flashing the phone will boot into CWM
7- flash the busyox superuser.zip through this CWM
8- after flashing reboot and now you have root
press thanks if it helps
for me,, its posible way to rooted the galaxy note.
Lol this is the third post on this same method
Mods where are thy?
Sent from my iPad using Tapatalk
Why do you state " no CWM" ?
Sent from my GT-N7000 using xda premium
The step number 5 must flash the CWM right ? why mention no CWM ? strange...
mnaveed said:
this is not my method just found this in the forums and wanted to share.
the credits are to the original developer.
i dont know who but anyway thanks to him
This is the Easyest Method Without kernel flashing and Yes -- No Triangle
Confirmed Working and Tested on latest official LPY.
1- Flash any Stock firmware with PC or Mobile Odin
2- Let the phone is completly boot
3- Copy CWM.zip and Superuser busybox installer into the root of memory card
4- reboot into stock revovery
5- select update from zip and then slect the cwm.zip file
6- after flashing the phone will boot into CWM
7- flash the busyox superuser.zip through this CWM
8- after flashing reboot and now you have root
press thanks if it helps
Click to expand...
Click to collapse
supercjlee said:
The step number 5 must flash the CWM right ? why mention no CWM ? strange...
Click to expand...
Click to collapse
after this method can you use Mobile Odin Pro ?
supercjlee said:
The step number 5 must flash the CWM right ? why mention no CWM ? strange...
Click to expand...
Click to collapse
cwm is not permanent
next time u boot into recovery it will be stock one
but root is permanent
andromeda1968 said:
after this method can you use Mobile Odin Pro ?
Click to expand...
Click to collapse
yes u can
oh thanks! i will try it tonight
Here is where you found this and who deserves credit, because yes it does work and works great!
http://forum.xda-developers.com/showthread.php?t=1329360
andreww88 said:
Here is where you found this and who deserves credit, because yes it does work and works great!
http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
OP Edited
thanks
andromeda1968 said:
after this method can you use Mobile Odin Pro ?
Click to expand...
Click to collapse
mnaveed said:
yes u can
Click to expand...
Click to collapse
So after you can flash CFRoot kernel with mobile odin pro and make CWM permanent?
hm... got signature verification failed in red....
neos_83 said:
So after you can flash CFRoot kernel with mobile odin pro and make CWM permanent?
Click to expand...
Click to collapse
yes

[Q] How to root N7000XXLA4?

I have searched at the development page but I am not quite understand what to do for rooting LA4. Expect downgrading the firmware, is there any other ways to root N7000? I have already brought the micro USB resistant which can reset the binary count.
Baseband version: N7000XXLA4
Kernel version: [email protected]#2
Builder number: GINGERBREAD.ZSLA2
have you tried this???
Well, if you don't mind getting the yellow triangle and tripping the binary counter, the simplest way to root LA4 would be:
1. Download CF-Root LA4 kernel to your PC
2. Start PC Odin
3. Boot your Note into Download Mode (volume down + home + power)
4. Connect your phone to the PC
5. Wait for the drivers to get installed and for Odin to recognize your phone
6. Click on PDA and navigate to the CF-Root XL4 kernel
7. Click Start
It'll take about 10 seconds and your phone will be rooted. However, your binary counter will show 1.
vijai2011 said:
have you tried this???
Click to expand...
Click to collapse
I didn't try this as my ROM is Hong Kong version. Let me provide you more information.
Baseband version: N7000XXLA4
Kernel version: [email protected]#2
Builder number: GINGERBREAD.ZSLA2
If you use the method you provided, would I lost my Hong Kong ROM?
chasmodo said:
Well, if you don't mind getting the yellow triangle and tripping the binary counter, the simplest way to root LA4 would be:
1. Download CF-Root LA4 kernel to your PC
2. Start PC Odin
3. Boot your Note into Download Mode (volume down + home + power)
4. Connect your phone to the PC
5. Wait for the drivers to get installed and for Odin to recognize your phone
6. Click on PDA and navigate to the CF-Root XL4 kernel
7. Click Start
It'll take about 10 seconds and your phone will be rooted. However, your binary counter will show 1.
Click to expand...
Click to collapse
I have brought a JIG (301ohm) Micro-USB. It can reset the counter, right?
Switch off the N7000 and reinstall the battery. Then put the JIG in the phone and remove it after getting download mode. That's all?
If it can do so, I will root by the method you provided.
Thank!!
ac88 said:
I didn't try this as my ROM is Hong Kong version. Let me provide you more information.
Baseband version: N7000XXLA4
Kernel version: [email protected]#2
Builder number: GINGERBREAD.ZSLA2
If you use the method you provided, would I lost my Hong Kong ROM?
I have brought a JIG (301ohm) Micro-USB. It can reset the counter, right?
Switch off the N7000 and reinstall the battery. Then put the JIG in the phone and remove it after getting download mode. That's all?
If it can do so, I will root by the method you provided.
Thank!!
Click to expand...
Click to collapse
Yeah you are going to use your hong kong rom.You cant root the rom which you have now.You have only three options:
1.Download and flash a pre-rooted stock rom and flash cf-root kernel to get cwm
2.Use Dr.ketan's method.Downgrade to rootable rom,use the script,upgrade to any rom using mobile odin
3.This method only can make you stay in your current Rom.Thats the method chasmodo said.Flash a cfroot kernel through PC odin.But by this method you get triangle and increase counter.
You cannot reset counter or remove triangle with jig as such.There is a sticky in Dev section for it.
vijai2011 said:
Yeah you are going to use your hong kong rom.You cant root the rom which you have now.You have only three options:
1.Download and flash a pre-rooted stock rom and flash cf-root kernel to get cwm
2.Use Dr.ketan's method.Downgrade to rootable rom,use the script,upgrade to any rom using mobile odin
3.This method only can make you stay in your current Rom.Thats the method chasmodo said.Flash a cfroot kernel through PC odin.But by this method you get triangle and increase counter.
You cannot reset counter or remove triangle with jig as such.There is a sticky in Dev section for it.
Click to expand...
Click to collapse
I've read this thread. http://forum.xda-developers.com/showthread.php?t=1354888
Do you think it work?
ac88 said:
I've read this thread. http://forum.xda-developers.com/showthread.php?t=1354888
Do you think it work?
Click to expand...
Click to collapse
Yeah as the thread says it will work with ICS,it shold.I havent tried it personally....
vijai2011 said:
Yeah as the thread says it will work with ICS,it shold.I havent tried it personally....
Click to expand...
Click to collapse
So, I will go for your method even it starts the counter. I can reset it
ac88 said:
So, I will go for your method even it starts the counter. I can reset it
Click to expand...
Click to collapse
Gud luck and play safe
vijai2011 said:
Gud luck and play safe
Click to expand...
Click to collapse
Share my work tonight
ac88 said:
Share my work tonight
Click to expand...
Click to collapse
ok sure
I found a problem before I root my N7000. Using downgrade method will wipe all my user data. Any other method that will not wipe my data?
ac88 said:
I found a problem before I root my N7000. Using downgrade method will wipe all my user data. Any other method that will not wipe my data?
Click to expand...
Click to collapse
If you my methid in 1st post,there are non wipe roms....it doesnt wipe the apps but will wipe others.
vijai2011 said:
If you my methid in 1st post,there are non wipe roms....it doesnt wipe the apps but will wipe others.
Click to expand...
Click to collapse
That means I can choose either one of them and root, after that, i can use mobile odin pro to upgrade to ZALA2 (HK ROM) again?
And I can also unroot by flashing with stock ROM and kernel?
ac88 said:
That means I can choose either one of them and root, after that, i can use mobile odin pro to upgrade to ZALA2 (HK ROM) again?
And I can also unroot by flashing with stock ROM and kernel?
Click to expand...
Click to collapse
The rom mentioned non-wipe will not wipe you apps.So select non-wipe rom.
vijai2011 said:
The rom mentioned non-wipe will not wipe you apps.So select non-wipe rom.
Click to expand...
Click to collapse
Thanks!
After that, I can upgrade to any ROM by Mobile Odin pro?
How to unroot it if I use this method?
Sent from my GT-N7000 using XDA Premium App
ac88 said:
Thanks!
After that, I can upgrade to any ROM by Mobile Odin pro?
How to unroot it if I use this method?
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Yeah you can update to any rom through mobile odin.Just remember to check ever root,inject su and mobile odin to root as you flash the rom.
To unroot Just flash any stock rom through pc odin or mobile odin
vijai2011 said:
Yeah you can update to any rom through mobile odin.Just remember to check ever root,inject su and mobile odin to root as you flash the rom.
To unroot Just flash any stock rom through pc odin or mobile odin
Click to expand...
Click to collapse
Thanks for your help! I am confident to do it now. Actually, I owned i9000 and P990. Both of them were rooted and installed Darky's ROM or CM7. But GS2 and GSN now have the binary counter which is new for me. I have to learn it again.
Sent from my GT-N7000 using XDA Premium App
ac88 said:
Thanks for your help! I am confident to do it now. Actually, I owned i9000 and P990. Both of them were rooted and installed Darky's ROM or CM7. But GS2 and GSN now have the binary counter which is new for me. I have to learn it again.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Just gain your confidence and go on mate...That was the method I used to root and flash darkyrom,checkrom and so on...
vijai2011 said:
Just gain your confidence and go on mate...That was the method I used to root and flash darkyrom,checkrom and so on...
Click to expand...
Click to collapse
Rooted and flash back the original rom successfully with half an hour!

[Q] Please Help :(

Guys i have flashed my sgsa with JB .....
Baseband Ver : XXLQ4
i have root access too.
In order to install a custom rom i wanted to flash the kernel.
So i downloaded universal kernel flasher. the prob is is when i select the kernel.md5 file the application(univ ker fla) returns to the main screen again... i don knw y.. pls help
Some one help me pls...i want to flash CoCore-E-4.4-CWM.zip... Do i need to use universal kernel flasher or i need to go to recovery mode and flash from sd card.... if i goto recovery mode and flash the kernel.md5 file will my phone get bricked????
Flash with Android Terminal Emulator - https://play.google.com/store/apps/...251bGwsMSwxLDEsImphY2twYWwuYW5kcm9pZHRlcm0iXQ..
After download and put the kernel on the root of your internal memory type in the terminal emulator
su
dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15
reboot
Click to expand...
Click to collapse
After each line, press enter from the keyboard
And do it carefully if the input is wrong you can hardbrick your phone
Check it until you feels O.K.
Sent from my GT-I9070 using xda app-developers app
soorya3d said:
Guys i have flashed my sgsa with JB .....
Baseband Ver : XXLQ4
i have root access too.
In order to install a custom rom i wanted to flash the kernel.
So i downloaded universal kernel flasher. the prob is is when i select the kernel.md5 file the application(univ ker fla) returns to the main screen again... i don knw y.. pls help
Click to expand...
Click to collapse
GaYoung28 said:
And do it carefully if the input is wrong you can hardbrick your phone
Check it until you feels O.K.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I jus tried flashing the zip file in recovery mode... but the error mess is
E: Signature Verification failed.
wat do i do next...
I am really scared of terminal emulator...
soorya3d said:
I jus tried flashing the zip file in recovery mode... but the error mess is
E: Signature Verification failed.
wat do i do next...
I am really scared of terminal emulator...
Click to expand...
Click to collapse
1. System settings>Developer Options>Turn it on, then check USB debugging.
2. Downlaod kernel, unpack till you get kernel.bin.md5
3. Install this on PC: http://forum.xda-developers.com/showthread.php?t=2119676
4. Use that app to flash kernel, just open it and follow the guide from app.
Don't worry about that. Just follow the steps i tell you and that is.
Sent from my GT-I9070 using xda premium
Try to clear cache and try again..else use d terminal method.
Sent from my GT-I9070 using xda app-developers app
Одг: [Q] Please Help :(
Verification error was because of that you can't install custom signed stuff from stock recovery.
Sent from Galaxy S Advance
Thanks
shut_down said:
1. System settings>Developer Options>Turn it on, then check USB debugging.
2. Downlaod kernel, unpack till you get kernel.bin.md5
3. Install this on PC: http://forum.xda-developers.com/showthread.php?t=2119676
4. Use that app to flash kernel, just open it and follow the guide from app.
Click to expand...
Click to collapse
Thanks a ton bro!!!!
I owe you a beer for this
shut_down is :angel: :angel: :angel:
Odp: [Q] Please Help :(
soorya3d said:
Guys i have flashed my sgsa with JB .....
Baseband Ver : XXLQ4
i have root access too.
In order to install a custom rom i wanted to flash the kernel.
So i downloaded universal kernel flasher. the prob is is when i select the kernel.md5 file the application(univ ker fla) returns to the main screen again... i don knw y.. pls help
Click to expand...
Click to collapse
Cause you have no file explorer like root browser or es file explorer.
tapatalked
shut_down said:
1. System settings>Developer Options>Turn it on, then check USB debugging.
2. Downlaod kernel, unpack till you get kernel.bin.md5
3. Install this on PC: http://forum.xda-developers.com/showthread.php?t=2119676
4. Use that app to flash kernel, just open it and follow the guide from app.
Click to expand...
Click to collapse
I tried this method but it didn't installed the kernal. Although it successfully pushed the kernel.bin.md5 file into my device.
sam_code4u said:
I tried this method but it didn't installed the kernal. Although it successfully pushed the kernel.bin.md5 file into my device.
Click to expand...
Click to collapse
I think you have instaled kernel. Pushed kernel succesfuly means kernel is instaled. Go to About phone, and see is it CoCore kernel.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
I think you have instaled kernel. Pushed kernel succesfuly means kernel is instaled. Go to About phone, and see is it CoCore kernel.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
I was having trouble rooting the device. I was trying to root it with the old root.zip file, the Shaaan's method http://forum.xda-developers.com/showthread.php?t=2087424
After continuous unsuccessful attempts I thought I should have a look at the forum - noticed the script has been updated. My bad. :/
I was trying to install the kernel without rooting the device. so, that was it.

[Q] ** Need I9070P custom recovery **

hey guys
i need a custom recovery for GT-I9070P not the normal one!!!
and also the .tar one file ... not the zip one.... the one can be flash through odin ... i mean for example recovery_for_I9070P.tar so i can flash it with odin ... also specify which android version should i be for this recovery ....
please dont give me the link to zip one which is temp recovery and should be install from stock recovery
thnks in advance
mastershex said:
hey guys
i need a custom recovery for GT-I9070P not the normal one!!!
and also the .tar one file ... not the zip one.... the one can be flash through odin ... i mean for example recovery_for_I9070P.tar so i can flash it with odin ... also specify which android version should i be for this recovery ....
please dont give me the link to zip one which is temp recovery and should be install from stock recovery
thnks in advance
Click to expand...
Click to collapse
For the start - on what version of Android are you now?
for both 2.3.6 and 4.1.2 .. no difference ... and if you have both ..then i would really appriciate ... if you have for another version of android then let me know...but for now i can be both on 2.3.6 and 4.1.2
mastershex said:
for both 2.3.6 and 4.1.2 .. no difference ... and if you have both ..then i would really appriciate ... if you have for another version of android then let me know...but for now i can be both on 2.3.6 and 4.1.2
Click to expand...
Click to collapse
I do not have odin flashable. But do this:
Root: http://forum.xda-developers.com/showthread.php?t=2087424
Install Universal kernel flasher and some root exlorer from play store
Install CoCore EP with Universal kernel flasher, download and unpack kernel.bin.md5 from here: http://forum.xda-developers.com/showthread.php?t=2140597
Reboot.
We have kernel and custom recovery on the same partition, so you must install it with kernel.
[QUOTE
Install CoCore EP with Universal kernel flasher, download and unpack kernel.bin.md5 from here: http://forum.xda-developers.com/showthread.php?t=2140597
We have kernel and custom recovery on the same partition, so you must install it with kernel.[/QUOTE]
i did not get the last part .... download it from the market or from this thread or from the universal kernel flasher ??
and put in sd card ??? a noobs explanation is required ..... am noob at this
mastershex said:
[QUOTE
Install CoCore EP with Universal kernel flasher, download and unpack kernel.bin.md5 from here: http://forum.xda-developers.com/showthread.php?t=2140597
We have kernel and custom recovery on the same partition, so you must install it with kernel.
Click to expand...
Click to collapse
You can install it from the play store, and install some root explorer like ES File explorer. Copy kernel.bin.md5 to sd card, in app browse for kernel and install it.
is the universal kernel flasher ok with """"CoCore-EP-8.6-CWM-Touch""""" ????
in version 1.4 its was comptible with """"""CoCore-EP-6.8-CWM """"" and no other news for"""""CoCore-EP-8.6-CWM-Touch""""""
if i flash this file inside CoCore-EP-8.6-CWM-Touch then i will have cwm recovery installed for ever untill i flash my phone again ????
no problem with phone during this recovery installed ???
thnaks for answering my noobs questions
mastershex said:
is the universal kernel flasher ok with """"CoCore-EP-8.6-CWM-Touch""""" ????
in version 1.4 its was comptible with """"""CoCore-EP-6.8-CWM """"" and no other news for"""""CoCore-EP-8.6-CWM-Touch""""""
if i flash this file inside CoCore-EP-8.6-CWM-Touch then i will have cwm recovery installed for ever untill i flash my phone again ????
no problem with phone during this recovery installed ???
thnaks for answering my noobs questions
Click to expand...
Click to collapse
UKF is compatibile with any CoCore, it might give you warning if it is some CoCore that is not added to its database, but you can ignore warning and install. Yes, you will have CWM permanently. There will be no problems for phone with it.
thanks bro and one more question is can i flash this cocore zip package through stock recovery while device is rooted ? then i will have recovery ???
mastershex said:
thanks bro and one more question is can i flash this cocore zip package through stock recovery while device is rooted ? then i will have recovery ???
Click to expand...
Click to collapse
No, you can do it when you install it first time. It needs CWM, it is for updating. You must do it the way I told you.
Or you can use shaan temporary CWM (I test and use it myself)
Download the "update.zip" from the thread, then flash the zip using stock recovery...
It works on ALL versions of android (yeah, even on 2.3.6)
Then if you want cocore, just flash the zip of cocore through recovery and done it, you got cocore on your phone...
Just don't forget to read the cocore thread and always remember cocore kernel only works at stock jb 4.1.2 based ROMs...
Shiningb said:
Or you can use shaan temporary CWM (I test and use it myself)
Download the "update.zip" from the thread, then flash the zip using stock recovery...
It works on ALL versions of android (yeah, even on 2.3.6)
Then if you want cocore, just flash the zip of cocore through recovery and done it, you got cocore on your phone...
Just don't forget to read the cocore thread and always remember cocore kernel only works at stock jb 4.1.2 based ROMs...
Click to expand...
Click to collapse
no matter what the baseband or rom version is ??? for exaple work on evey stock ROM ????
I9070PXXAEMF2 , I9070PXXMDAM and all other stock 4.1.2 ?????
mastershex said:
no matter what the baseband or rom version is ??? for exaple work on evey stock ROM ????
I9070PXXAEMF2 , I9070PXXMDAM and all other stock 4.1.2 ?????
Click to expand...
Click to collapse
Yes...
Since its temporary it will work on any ROM until next reboot...
Shiningb said:
Yes...
Since its temporary it will work on any ROM until next reboot...
Click to expand...
Click to collapse
but he said the recovery is permenantly and and wont remove untill the device is flashed with a 4 file stock rom !!!!!!!!
what now this method is a temp recovery or permenant ????? is cocore recovery is temp and be disapper with a single reboot or its permenant ????
mastershex said:
but he said the recovery is permenantly and and wont remove untill the device is flashed with a 4 file stock rom !!!!!!!!
what now this method is a temp recovery or permenant ????? is cocore recovery is temp and be disapper with a single reboot or its permenant ????
Click to expand...
Click to collapse
CoCore = permanent, Shaaan's CMW = temp.
P.S. And you can flash CoCore ZIP with that temp, then you get permanent. If you do not want to use Univeral kernel flasher.
I9
shut_down said:
CoCore = permanent, Shaaan's CMW = temp.
P.S. And you can flash CoCore ZIP with that temp, then you get permanent. If you do not want to use Univeral kernel flasher.
Click to expand...
Click to collapse
this is better .... would you give me the link to cwm temp recovery and instroduction pls bro ? for I9070P cwm recovery
mastershex said:
I9
this is better .... would you give me the link to cwm temp recovery and instroduction pls bro ? for I9070P cwm recovery
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1987313
thank you very much bro ... and one last thing do u have a link to a multi firmware package (4file) (3file) for I9070P ?

Categories

Resources