So guys, i'm in the first JB fw (LQ4) and want to try a new one AND i'm using CM 10.1 right now.
Can i just flash a new FW via Odin and re-flash CM normally? Or should i downgrade to GB?
I'm all new here, and didn't found any questions like this at first. Sorry if repost, in this case can u point me at the right thread?
Yes you can.
Flash any stock firmware JB with Odin and after flash from stock recovery CM10.1 or CM10.2 and gapps.
Powered by CM10.1
Related
Hi,
I have stock ICS rom LP4 which custom rom is safe to flash?
I once tried to flash abyss kernel 4.2 it bricked my phone, i had my motherboard replaced.
So just wanted to confirm which custom rom's I can flash.
--->First flash a stock GB ROM of your country by following dr.Ketan's guide.
--->Since you have already once bricked you MB,I guess you wouldn't be feeling safe with a brickbug kernel so flash ROMs which use the CM9 kernel as base.The ones which I know about are-ParanoidAndroid,AOKP,MIUI,CM9(duh).
--->You can also try flashing ROMs which use franco kernel,speedmod kernel.
--->NEVER WIPE from a stock ICS kernel.
For more info on installing above ROMs check individual threads in the development section and follow the instructions word-for-word.
But i have heard downgrading also has problems
matharuajay said:
I once tried to flash abyss kernel 4.2 it bricked my phone
Click to expand...
Click to collapse
I really don't think abyss kernel bricked your device. There might be another reason...
matharuajay said:
But i have heard downgrading also has problems
Click to expand...
Click to collapse
Like ?
Flashing a stock GB ROM via PC Odin has absolutely no problems at all.
Yup flashed a GB rom now analysing which custom rom to flash
me also Mine should be arriving any time soon ! cant wait to flash Paranoid Android. Is it necessary to downgrade to GB if the Note comes with official ICS ?
I thought I just need to flash a safe kernel (abyss) then flash the ROM ?
NEVER flash CM9 release from an ICS kernel.
Sent from my GT-P1010 using XDA
Hi, I need help with my Galaxy Note. I just buy secondhand Galaxy Note, it has XXLS2 4.1.1 rom for now. I want flash AOSPA 4.2.1 rom on it. My previous phone was HTC HD2, so I'm used to flashing without limitation So, I need your help to tell me if I'm thing good about it. So, firstly I must flash Philz kernel for my phone, to get root and recovery. But for my rom is only version 2.7... is it safe to flash? And next I can just do full wipe, reboot, and flash AOSPA 4.2.1 rom, yes?
You won't be able to flash a aokp rom using philz 2.7 as it will not install and error 7.
-Install Philz and gain root and cwm
-Then place all the required files to flash the rom to storage.
-Then flash a different safe kernel like hydracore or cm kernel.
-Boot into recovery and do wipes and formats and flash. the rom. (while on a different kernel you might not be able to boot into the rom. Just recovery)
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
sinedoOo said:
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
Click to expand...
Click to collapse
Yes 2.7 is safe. Just that it cannot install some roms.
Because it's and old kernel.
Yes stay with the kernel included in the rom
Yes PA has a safe kernel and the backup can be restored.
Any kernel like hydracore or cm will do.
Also 2.99 PA might not to that's stable. So.. Your choice. You can use and older version like 2.57 as well
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
shoey63 said:
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Need to meditate
GT N7000
hi frds i am having a issue with Amnix Xperia ROM Build 3 for GT N7000. After I installed my antivirus & later when it finished scanning for malware it gives warning about one app - MALICIOUS APP
VOODOO-INSTANT-ANTI-EXYNOS-MEM-ABUSE-0.3.APK
EXPLOIT.EXYNOS.A
can someone pls help....is it a virus....
It's already replied in the noob friendly thread
I forget to reply, sorry. Thanks! It is all working good, so I have now my Galaxy Note with newest Paranoidandroid rom
Hello guys! So i have got a problem, i want flash a new firmware but the user that had this phone before has allready flashed a new firmware...
It is an old 2.2 FW but i want a 4.3 FW. However what should i do now? Its rooted allready, and there is a old recovery installed(no option to flash roms)
At first you have to flash a Custom Recovery Mode. For example CWM or TWRP.
Then you can flash your Custom Rom.
Just use Google an you will find an instructions.
For the best experience you can flash it to the latest stock ROM via ODIN, install CF-Root (contains CWM too) and then upgrade to CM 10.2 with fullwipe
Just go to the forum and search cyanogenmod 10.2 from ADC team then they will provide the link to install the CWM. You can install CWM through odin (makesure u got the right odin). Follow strictly the instruction that is provided by the forum
Sent from my GT-I9001 using xda app-developers app
I think there are only Roms by the ADC-Team for the I9001 and not the I9000.
Sent from my GT-I9001 using Tapatalk 4
Here is a instruction ...step by step ...hope it can help
http://forum.xda-developers.com/showthread.php?t=2444308
DjaiGM said:
Hello guys! So i have got a problem, i want flash a new firmware but the user that had this phone before has allready flashed a new firmware...
It is an old 2.2 FW but i want a 4.3 FW. However what should i do now? Its rooted allready, and there is a old recovery installed(no option to flash roms)
Click to expand...
Click to collapse
i am currently using CM 11 on my Galaxy Note. but i have quite a heavy requirement for the camera in the phone and the camera that comes with CM is not that good. everything else is amazing. i found this Arya Rom based on TW and 4.1.2 JB and i can use the stock camera app i guess which was great when i used to have the stock rom. now the question is that thisnrom requires first reverting back to stock. i installed custom rom quite some months ago. so i dont rememeber any info abt the stock rom.i first used Asylum and the omni and then CM. so if i download the stock firmware now how would i know which one to download for my phone. i dnt remember that DDLSC or DDLS6 thing. Or does that code matters only while downloading Philz Recovery. And lastly can i flash Arya directly through my current recovery CWM 6.0.4.7. Please help
sas2013 said:
i am currently using CM 11 on my Galaxy Note. but i have quite a heavy requirement for the camera in the phone and the camera that comes with CM is not that good. everything else is amazing. i found this Arya Rom based on TW and 4.1.2 JB and i can use the stock camera app i guess which was great when i used to have the stock rom. now the question is that thisnrom requires first reverting back to stock. i installed custom rom quite some months ago. so i dont rememeber any info abt the stock rom.i first used Asylum and the omni and then CM. so if i download the stock firmware now how would i know which one to download for my phone. i dnt remember that DDLSC or DDLS6 thing. Or does that code matters only while downloading Philz Recovery. And lastly can i flash Arya directly through my current recovery CWM 6.0.4.7. Please help
Click to expand...
Click to collapse
to flash arya, first with cwm 6.0.4.7 flash this kernel : PhilZ-cwm6-XXLTA-ATL-5.15.0-signed and reboot back to recovery (not to system) and flash arya rom, that's all.
albatron34 said:
to flash arya, first with cwm 6.0.4.7 flash this kernel : PhilZ-cwm6-XXLTA-ATL-5.15.0-signed and reboot back to recovery (not to system) and flash arya rom, that's all.
Click to expand...
Click to collapse
Well. Thats simple. Now i got the way to do it.Thanx a lot bro. :good:
Good Day,
I want to ask if I can directly install a custom ROM on my GT-N7000 running on stock anrdoid Gingerbread.
Thank you.
chiechieyap said:
Good Day,
I want to ask if I can directly install a custom ROM on my GT-N7000 running on stock anrdoid Gingerbread.
Thank you.
Click to expand...
Click to collapse
Yes..
Flash Phil jb kernel using Odin... Then use that recovery to flash a cm11 kernel like raw kernel.. Then flash the kitkat rom... You should make the backup of your current rom if you want before installing the newer OS kernel.
Thanks for the reply. Can you give me the links so I can make the procedure. And also what is the latest stock rom for the GT-N7000? Thanks.
Just check the development section of xda n7000.. All links are there and for latest jb rom you can check samfirmware.com