Database Develop

cwm post root

I cannot seem to find the answer that I am looking for for my issue, maybe i missed it.
I tried for ages to get to the root plus cwm to work and i could not make it happen for my phone, is there a way to put on the cwm option POST root?
I was able to get the phone rooted but had to go about it a separate way and i would like to put some custom rom action on this miserably boring phone.
Thanks

I rooted my phone first then used mobile Odin pro to flash the cf kernel which means I now have cwm and recovery.

ReportMeCrybaby said:
I cannot seem to find the answer that I am looking for for my issue, maybe i missed it.
I tried for ages to get to the root plus cwm to work and i could not make it happen for my phone, is there a way to put on the cwm option POST root?
I was able to get the phone rooted but had to go about it a separate way and i would like to put some custom rom action on this miserably boring phone.
Thanks
Click to expand...
Click to collapse
yes.
can you post screenshot of setting-about phone
OR mention what you can see there for this field
Baseband
Kernel
Build versuion.

About phone
dr.ketan said:
yes.
can you post screenshot of setting-about phone
OR mention what you can see there for this field
Baseband
Kernel
Build versuion.
Click to expand...
Click to collapse
Sorry, still new to Android and have been in Apple land for a while so my brain went on vacation for a bit.
Baseband is XXKK5
Kernal is KKA
Gingerbread
Thanks in advance, i cant wait to have something beyond this stock nightmare

Ok
Download guide from last link on my signature.
Select i have rootable rom
Select i have kka kenel
Now download according file, n follow instruction, you have to exexute i already rooted
Sent from my GT-N7000 using xda premium

dr.ketan said:
Ok
Download guide from last link on my signature.
Select i have rootable rom
Select i have kka kenel
Now download according file, n follow instruction, you have to exexute i already rooted
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
When i click on and open the file "dr ketan guide" I get a list of kernal versions (to confirm i am on the right page correct) then scroll down to 1) i have a direct rootable or 2) i do not, I click on 1 and it reads file not found when i proceed to open the file. I get the same when i click 2 as well.

download guide, extract n keep file n folder structure as it is, if u have change
Sent from my GT-N7000 using xda premium

dr.ketan said:
download guide, extract n keep file n folder structure as it is, if u have change
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Still getting File Not Found when i extract and open the Dr K guide.
Does that page say Ultimate Rooting Guide for GNote at the top then have the kernal versions listed then the options I can direct or cannot direct root at the bottom of the page with links?
They are still not opening if this is the correct location, can you just send me a direct link to the site?
Thanks loads

[Q] P1000 Brick

Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..

Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app

yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now

Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS

AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.

priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.

No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..

Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin

glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.

You can extract modem.bin from the rom that you have downloaded.

uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do

Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown

Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app

priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?

yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.

priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz

Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app

Please help me

So im lost. I flashed the wrong rom and bricked my vzw tab. First time iv ever bricked any device unfortunately. How do i fix it? Odin? Im not boot looping and i cant get into recovery but i believe i can get into download mode. And advice and id be very thankful. Or do i have a new paperweight
Sent from my LG-LS970 using xda app-developers app

Odin/heimdall flash stock rom in download mode should take care of it.
Sent from my GT-P1000 using xda app-developers app

Thanks im.stressed because its not charging...that okay to odin on low batt
Sent from my LG-LS970 using xda app-developers app

so im working on this today and i cant get into download mode. i only see the phone and a computer with a orange triangle in the middle. i saw a video of how to fix it but i couldnt download the files. can anyone please point me to the right thread.

In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.

priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
iv been messing with it all day and odin wont see it. any tricks?

Which file to flash?
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks

Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Not for ruthlessbeatle, as this is for GSM P1000 only.
Sent from my GT-P1000 using xda app-developers app

hotstart said:
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1133590
this helped me a ton i was bricked and now im back kinda of. remember read everything 2 twice if you have to. i could use a hand again though im back to bootlooping at the vzw screen after i used the link above. i wiped after flash but still bootlooping. its not cuz i converted to ext4 because i saw others who had converted and didnt have a problem. any advice on how i get this bad boy to spot boot looping thanks

priyana said:
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Click to expand...
Click to collapse
Hi priyana,
thank you for your advice!
Currently I am stuck because in the middle of the flashing process the tab switched off maybe due to a low battery.
But is starting with the secondary download screen again - so I am hoping to be able to load it bit better for the next try.
Will let you know whatever outcome there will be.
Cheers

[Q] Tab stuck on samsung logo after flashing, need help

My sister owns this tab, and she wanted me to update its firmware from stock 2.2 (froyo) to 2.3.6 (gingerbread). I followed a guide on youtube, and I downloaded the files provided in the description tab. The flashing went smoothly, but after rebooting, the tab won't get past the samsung logo. Have I killed her tab? If I did, she'd kill me too Please help..
Additional info:
Model: GT-P1000
FCC ID: A3LGTP1000
I think she bought the tab in germany, if so then what firmware should I download?
Is it possible to just download any FW file to use for flashing? If not can anyone please direct me to the proper firmware?
I've been googling for a day..Download 2 firmwares but still no luck.. also tried wiping user data and cache.
Thanks for any help..much appreciated!

You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium

Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!

chir0n said:
Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!
Click to expand...
Click to collapse
I forgot to mention did you boot into recovery and wipe data and see if you got it to boot? Often times after an update you have to boot into stock recovery and wipe cache and factory reset but if that failes just use the pit gt-p1000 and the firmware I would try froyo then if that fails to work do 2011 then if that don't work try 2012 but always use the pit file if none of these work then it means your internal sdcard gave out. Also before trying all of this try doing a factory reset in recovery and if you get errors post a screenshot of it so I get a better idea of what happened. Hope this helps
EDIT: sorry just read the part where u already did the factory reset and wipe cache was it in stock recovery? And did you get any errors?
Sent from my SPH-L710 using xda premium

Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..

chir0n said:
Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..
Click to expand...
Click to collapse
Oh I see what happened has this tablet previously been rooted or on a custom ROM? Because normally when on a custom ROM specially with our tablets the partition format changes from rfs to ext4 because its faster and more reliable. That being said what your experiencing is your tablet trying to boot but its not the right format because touch wiz only runs on rfs format. This happened to my tablet too when I tried to restore to stock and all I did was flash the pit and the stock firmware in Odin and it booted right up. Took my tablet about 20 minutes the first time to boot up though but it eventually did.
Sent from my SPH-L710 using xda premium

oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!

chir0n said:
oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!
Click to expand...
Click to collapse
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium

jazz995756 said:
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?

chir0n said:
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?
Click to expand...
Click to collapse
OTA stands for over the air update and well do you still get errors in recovery? And did you flash that pit file with all the other firmwares u had?
Sent from my SPH-L710 using xda premium

i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you

chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium

That is because yours is CDMA tab.
Overcome is for GSM only.
Sent from my GT-P1000 using xda app-developers app

jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
priyana:
That is because yours is CDMA tab.
Overcome is for GSM only.
Click to expand...
Click to collapse
That's some really bad thing that's gone, anyway if you can afford the $170 then why not? instead of just forsaking the tab away. again thanks for all the help dude, it was my first time flashing android devices, but not nokias. it was different in someway, anyhow just always be cautious of what you do always. please close thread tnx

i need help
chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
jazz995756 said:
You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
please can i have the link to the pit file, the link is hosted on hotfile which is now down.

You may want to use the Overcome Method: http://forum.xda-developers.com/showthread.php?t=1881981
Sent from my GT-P1000 using XDA Premium 4 mobile app

tunjicool said:
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
please can i have the link to the pit file, the link is hosted on hotfile which is now down.
Click to expand...
Click to collapse
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).

xz124 said:
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).
Click to expand...
Click to collapse
thank you for this reply. though it came a bit late.
the device is dead!!!
if i on it now, it will only on the camera flash light as long as i hold the power button and then off the light when i release the button.
i don't know what to do.
i guess i can still get help on reviving it somehow or else i should start planning the burial .

i896 help

i had a cm version on the phone and tried to update but when i did it failed and i couldnt boot into my rom so i tried to install another all failed ended up installing speedmod kernel and recovery and now i cant mount my sdcard????
first can some1 plz explain to me what is it with this phone and it being selective about the roms i can install and when usually its just wipe and flash for me now i have this to deal with

xanda143 said:
i had a cm version on the phone and tried to update but when i did it failed and i couldnt boot into my rom so i tried to install another all failed ended up installing speedmod kernel and recovery and now i cant mount my sdcard????
first can some1 plz explain to me what is it with this phone and it being selective about the roms i can install and when usually its just wipe and flash for me now i have this to deal with
Click to expand...
Click to collapse
That's cause you didn't follow all the steps.. When you flash higher versions, it has to repartition. Therefor a couple flashes are needed. If coming from gb and going up to 10.2 or 10.3, you'll have to flash cm7 first and then make your way to cm10.2, once again by flashing twice to rewrite the partition.
All that is clearly mentioned in the instructions. Just gotta take the time to read and understand it.
Sent from my SGH-I747 using xda app-developers app
---------- Post added at 07:18 AM ---------- Previous post was at 07:18 AM ----------
BWolf56 said:
That's cause you didn't follow all the steps.. When you flash higher versions, it has to repartition. Therefor a couple flashes are needed. If coming from gb and going up to 10.2 or 10.3, you'll have to flash cm7 first and then make your way to cm10.2, once again by flashing twice to rewrite the partition.
All that is clearly mentioned in the instructions. Just gotta take the time to read and understand it.
As for your sd card, that could be another problem. It might've gone bad.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SGH-I747 using xda app-developers app

BWolf56 said:
That's cause you didn't follow all the steps.. When you flash higher versions, it has to repartition. Therefor a couple flashes are needed. If coming from gb and going up to 10.2 or 10.3, you'll have to flash cm7 first and then make your way to cm10.2, once again by flashing twice to rewrite the partition.
All that is clearly mentioned in the instructions. Just gotta take the time to read and understand it.
Sent from my SGH-I747 using xda app-developers app
---------- Post added at 07:18 AM ---------- Previous post was at 07:18 AM ----------
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
i know the repartitioning thing but not from this phone. trust me if it was clear in the instructions i would have done it 4-5 roms iv tried and none of them have this instruction i appreciate your resonse though but onto a solution. i think since it refuses to mount the sdcard smtn went wrong trying to install cm10.2 though they all faild. so im guessing my safest bet to be to use odin to load a new rom or something advice there or from that of your experince with the device would be much appreciated.

xanda143 said:
i know the repartitioning thing but not from this phone. trust me if it was clear in the instructions i would have done it 4-5 roms iv tried and none of them have this instruction i appreciate your resonse though but onto a solution. i think since it refuses to mount the sdcard smtn went wrong trying to install cm10.2 though they all faild. so im guessing my safest bet to be to use odin to load a new rom or something advice there or from that of your experince with the device would be much appreciated.
Click to expand...
Click to collapse
I'd probably start fresh at this point. Flash Odin kk4 without bootloaders and see if boots up correctly. Also try your sd card. From there you can flash korn kernel using odin 1.87 and go back up to whichever ROM you want using their full instructions.
Sent from my SGH-I747 using xda app-developers app

BWolf56 said:
I'd probably start fresh at this point. Flash Odin kk4 without bootloaders and see if boots up correctly. Also try your sd card. From there you can flash korn kernel using odin 1.87 and go back up to whichever ROM you want using their full instructions.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
explain somethings to me plz and thanks. What the layout of this phone partition table? does it have a bootloader like on htc?
the kernel seems to be packaged with cwm tho i doubt it is this true on all occasions?not being able to flash a rom due to the kernel mismatch is unheard of by me atleast it would flash then just not work can u explain what you think was the problem i was on cm10 btw.
korm kernel gonna research that but i might get anseers from you first its a kernel for what gb??
sorry am reallly blank on this phone

download links or queries to google would be a great help here dont wanna make a bad situation worst

got the kk4 kernel from here:http://forum.xda-developers.com/showthread.php?t=1294477 if it works and i can mount my sdcard i will need a rom can i use any rom?

xanda143 said:
got the kk4 kernel from here:http://forum.xda-developers.com/showthread.php?t=1294477 if it works and i can mount my sdcard i will need a rom can i use any rom?
Click to expand...
Click to collapse
Here's stock kk4: http://hotfile.com/dl/137871658/d25...O_Bootloaders_Re-partition_Full_Wipe.zip.html

BWolf56 said:
Here's stock kk4: http://hotfile.com/dl/137871658/d2533cc/i897uckk4_Odin_One_Click_NO_Bootloaders_Re-partition_Full_Wipe.zip.htm
i got impatient and did this http://forum.xda-developers.com/showthread.php?t=731989 think its the same program minus the no bootleaders full partion idk. anyways sicnce your already helping and you know where i am what are your instructions to now getting on jb and will i have to do that everytime i wanna switch roms?
Click to expand...
Click to collapse

xanda143 said:
BWolf56 said:
Here's stock kk4: http://hotfile.com/dl/137871658/d2533cc/i897uckk4_Odin_One_Click_NO_Bootloaders_Re-partition_Full_Wipe.zip.htm
i got impatient and did this http://forum.xda-developers.com/showthread.php?t=731989 think its the same program minus the no bootleaders full partion idk. anyways sicnce your already helping and you know where i am what are your instructions to now getting on jb and will i have to do that everytime i wanna switch roms?
Click to expand...
Click to collapse
Getting impatient is the worse thing you can do.. Now you'll have to flash the gb bootloaders cause you just flashed 2.2.
Now flash this: http://click.xda-developers.com/api...e</b></font>&jsonp=vglnk_jsonp_13811531834186
And please, be patient. Don't interrupt it for any reason!!
From there, follow this: http://forum.xda-developers.com/showthread.php?t=1350266
I'm sorry but I can't hold your hand through all this, I'm in class.
Click to expand...
Click to collapse

BWolf56 said:
xanda143 said:
Getting impatient is the worse thing you can do.. Now you'll have to flash the gb bootloaders cause you just flashed 2.2.
Now flash this: http://click.xda-developers.com/api...e</b></font>&jsonp=vglnk_jsonp_13811531834186
And please, be patient. Don't interrupt it for any reason!!
From there, follow this: http://forum.xda-developers.com/showthread.php?t=1350266
I'm sorry but I can't hold your hand through all this, I'm in class.
Click to expand...
Click to collapse
Thank you i think that will be all
Click to expand...
Click to collapse

BWolf56 said:
xanda143 said:
Getting impatient is the worse thing you can do.. Now you'll have to flash the gb bootloaders cause you just flashed 2.2.
Now flash this: http://click.xda-developers.com/api...e</b></font>&jsonp=vglnk_jsonp_13811531834186
And please, be patient. Don't interrupt it for any reason!!
From there, follow this: http://forum.xda-developers.com/showthread.php?t=1350266
I'm sorry but I can't hold your hand through all this, I'm in class.
Click to expand...
Click to collapse
BTW readme is exrtremly clear that it dosnt contain any bootloader files which i guess since i did the other thing would make this irrelavant and i could just go to the 2nd instructions but ill do to the T. BIG THANKS
Click to expand...
Click to collapse

xanda143 said:
BTW readme is exrtremly clear that it dosnt contain any bootloader files which i guess since i did the other thing would make this irrelavant and i could just go to the 2nd instructions but ill do to the T. BIG THANKS
Click to expand...
Click to collapse
In that case, flash the first link I gave you. Which is the non-bootloaders version.
Usually, the older one clicks flashes the bootloaders.