Related
is there any solution for my gtab after being like this...i'v boot to recovery mod n format my data and my "system" file...then when i'm try to reboot my device it stuck at boot screen "Galaxy Tab"...
it can go to download mod but that odin can't recognize my tab....
its ok don't be afraid , its always happen to me , when am trying to made theme or something ... u go flash the stock gingerbread via odin , and then flash overcome gingerbread , that if u want it ..... its not a big deal
maybe you can re-install your kies , maybe your usb driver something happen to it ..
Seems strange that Odin doesn't recognise your Tab. Have you got any other USB ports you can try? Does the trick for me when Odin doesn't recognise my Tab.
Edit: I had the same issue after i flashed CM7. As Darkpal said, reinstall the drivers, try a different USB port and you should be fine.
Hope this helps.
Sent from my GT-P1000 using XDA Premium App
Yes from that image your tab seems messed up pretty good. But far from bricked. check your drivers in your computer. They might've been borked or something. Also do as GANJ said try another slot
Download mode, flash a good rom in Odin.
If one pc isn't recognizing your tab, try a different usb port or different pc.
Thank's ya all for replying...i think may be cause of i'm trying to flash via different pc from before...the problem is my pc got screen problem n cannot boot...lol
Anyway tq n i'll report back...when i'm done...lol
Sory for my bad english
Sent from my GT-I9003 using XDA App
shuk9782 said:
Thank's ya all for replying...i think may be cause of i'm trying to flash via different pc from before...the problem is my pc got screen problem n cannot boot...lol
Anyway tq n i'll report back...when i'm done...lol
Sory for my bad english
Sent from my GT-I9003 using XDA App
Click to expand...
Click to collapse
In that case you have to sync with Kies before Odin will recognise it.
Sent from my GT-P1000 using XDA Premium App
How to sync with kies...my gtab cannot boot(stuck at boot screen)...
I,ll try to install kies to another pc try reconnect again...tq 4 ur repy
Sent from my GT-I9003 using XDA App
Use the PC you originally used to flash with Odin if its possible.
Sent from my GT-P1000 using XDA Premium App
Not possible...anyway tq buddy i use another pc to install kies ngn try to connect my gtab wit only boot screen...then dc n run odin wit my tab in download mod n reconnect again....wallaaa,everything done perfectly...thank's to ya all...
Sent from my GT-I9003 using XDA App
Read my signature,lol thank,s ya all...and now my gtab rooted with cwm
Sent from my GT-P1000 using XDA Premium App
Hey there,
Got my moms Galaxy over here. Thing wasn't updated and slow as hell so I thought I'd update it. Went through the Kies process but that didn't really work, phone just couldn't make connection despite what ever driver I used (win or mac, got both here).
So first things went haywire when I read somewhere to flash recovery I needed to do something via Heimdall. Did that with the command window and afterwards the phone got stuck in a bootloop (only the I9000+samsung repeating over and over again).
Then I tried flashing GB from samfirmware, which failed. All done through odin, the screen went purple at dbdata.rfs. So I went with stock froyo, from the androidworld.nl forums and same thing happens but now it's a blue screen at factoryfs.rfs.
What am I doing wrong?
Try flashing again via Odin and this time don't touch your pc while it is flashing. That yellow purple screen has happened to me while I was doing other things while flashing was going on in the background.
And check if your phone is i9000 or i9000+ and flash the their respective firmware .
Sent from my GT-I9000 using XDA App
gcuchiha said:
Try flashing again via Odin and this time don't touch your pc while it is flashing. That yellow purple screen has happened to me while I was doing other things while flashing was going on in the background.
And check if your phone is i9000 or i9000+ and flash the their respective firmware .
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Same thing, didn't do anything and screen went gray. This is so random for me, as flashing is SO easy with my own Desire but this thing is on a whole different level.
Try changing your Odin version to 1.82 and try again.
Sent from my GT-I9000 using XDA App
Or 1.3 idk try both.
Sent from my GT-I9000 using XDA App
gcuchiha said:
Try changing your Odin version to 1.82 and try again.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
gcuchiha said:
Or 1.3 idk try both.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Actually did both already! The 1.3 was from the 2.2 pack from the Dutch forum. Got 1.82 from the samfirmware website. No luck yet
1.82 shows a bootloader function, do I need to have one of those files with it?
No don't flash bootloader
Sent from my GT-I9000 using XDA App
gcuchiha said:
No don't flash bootloader
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I was about to try this actually! http://forum.xda-developers.com/showthread.php?t=1196179
Since the screwup started with Heimdall, might fix it with that?
Watch a YouTube video and see if you're doing everything properly.
What I do is
1. Go to download mode
2. Open Odin, select pit, PDA, phone, CSC files. And remember to check the re partition option
3. Connect your phone
4. Click start.
Sent from my GT-I9000 using XDA App
Maybe. I never used heimdall. Maybe you could try that.
Sent from my GT-I9000 using XDA App
gcuchiha said:
Watch a YouTube video and see if you're doing everything properly.
What I do is
1. Go to download mode
2. Open Odin, select pit, PDA, phone, CSC files. And remember to check the re partition option
3. Connect your phone
4. Click start.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Doing all that yeah, exactly in that order.
Hmmm. Then I guess heimdall is your only hope ,since it started the problem.
Sent from my GT-I9000 using XDA App
Hmm, in Heimdall it gets all the way up to MODEM @ 59%. Then it fails and crashes..
weird
[edit] buuuuuuuut I got android recovery back! okay now we have progress!
and now by adding the packaged zImage from CM have CM.. progress again!
Are you using the original USB cable?. Same thing happened to me with a cheap ebay cable...
cabessius said:
Are you using the original USB cable?. Same thing happened to me with a cheap ebay cable...
Click to expand...
Click to collapse
Hm, no. It's a replacement cable (cheap) which I used for my Desire, no problem with that at all. Though it might be it indeed! Will be two days before I can get the original cable.
In the meanwhile I got CWM-based Recovery v.5.0.2.6 working.. while installing cyanogenmod it goes "checking blm status", then "install from sd complete".. a bit strange and it doesn't boot into the rom but into the recovery.
Lipinsky said:
Hm, no. It's a replacement cable (cheap) which I used for my Desire, no problem with that at all. Though it might be it indeed! Will be two days before I can get the original cable.
In the meanwhile I got CWM-based Recovery v.5.0.2.6 working.. while installing cyanogenmod it goes "checking blm status", then "install from sd complete".. a bit strange and it doesn't boot into the rom but into the recovery.
Click to expand...
Click to collapse
Switching back to the original cable fixed the problem for me. Hope it does for you as well, try that and tell us what happened!.
Can I still use Odin then, now with CWM recovery?
You can use Mobile Odin by Chainfire (look for it in the market), it works exactly as an Odin built-in your SGS with no need for PC.
cabessius said:
You can use Mobile Odin by Chainfire (look for it in the market), it works exactly as an Odin built-in your SGS with no need for PC.
Click to expand...
Click to collapse
Uhm, well I can't get really into any market as no rom will boot at this moment..
Guys, thanks for the cable advice! Could get my hands on a SE cable and flashed 2.3.5 stock through Odin. Happy that I didn't wreck my moms phone :')
I accidentally flashed a file instead of .tar one, name was recovery or boot using Odin ,PDA, and then my P7300 wont open, just the boot screen appears (Samsung GalaxyTab 8.9) than nothing happen.
but "power button+ volume (-) " mode works, says "can't access to /System/csc/TUR/system"
Cant see sd card
And kies cant see anymore gtab also
what can i do, thanks
Does odin see the comm port? If it does i'd try to flash the stock rom thru odin. Sammobil would have the stock rom for your device.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Does odin see the comm port? If it does i'd try to flash the stock rom thru odin. Sammobil would have the stock rom for your device.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Thank you a lot. it worked:good:
Great. That's what here for. Share the experience.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
HI, there are 4 similar threads to this but neither of them answer my question and only offer alternatives.im trying to get this captivate to 4.0 ICS(ice cream sandwitch) and i need CWM recovery mode to do that.so at the moment im using odin to try to get back stock 2.1 update-1 then planning to install CWM and go from there
so help.....how do i get odin recognize my phoen in download mode? :'( :'( :'(
http://forum.xda-developers.com/showthread.php?t=2059356&highlight=recovery using that basically. short n sweet
Ummmm...see the stickied thread in this forum..."Captivate - PC Connection Issues..."
Sent from my SAMSUNG-SGH-I747 using xda premium
[Solved!]
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!
http://forum.xda-developers.com/showthread.php?t=731989
Follow this guide after putting your phone into download mode.
Sent from my SGH-I897 using Tapatalk 2
chdiryoung said:
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!
Click to expand...
Click to collapse
See this Captivate - PC Connection Issues, Download Mode and Recovery Mode Help thread on more info on how to get the phone to boot into Recovery...http://forum.xda-developers.com/showpost.php?p=33227541&postcount=1
Sent from my SAMSUNG-SGH-I747 using xda premium
Thanks, I tried getting into recovery mode using the guide on that thread but no luck. I haven't gotten to try the first guide suggested yet so when I have time I'll try that. Thankfully I can get into download mode fine.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Thanks so much, I'm gonna try that on Monday first chance I get!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
4-2ndtwin said:
Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
How long should/could it take Odin to detect/recognize my captivate? I couldn't wait to try the KK4 flash, but I've waited for about 10 minutes and it's not showing anything in Odin.:\
It should only take a few seconds.
See that Captivate - PC Connection Issues...thread i linked u to in my reply a few posts up.
Sent from my SAMSUNG-SGH-I747 using xda premium
Well I've been up all night lol but I got everything to work!! I guess it all just clicked with me and I understood and found all the answers in threads. THANK YOU SO MUCH!! Your link and Odin one click worked perfect. I think I had a problem with the drivers, that's why it wouldn't detect it. I read in another thread it could be that and I tried reinstalling the Samsung drivers but no luck. So I just switched to my windows xp where I'd never used heimdall drivers(I was on my windows 7) and did it on there, worked perfectly! I then went on to reinstall cwm and then cm 10.1.2 and I love it! Now I'm waiting for the Google play store .zip to download so I can flash it onto my i897! THANKS AGAIN!!! :thumbup:
Sent from my SAMSUNG-SGH-I317 using xda app-developers app