Related
Hi guys,
1. I have a rooted, stock 4.2.2 Nexus 7 and I use Chainfire's SuperSU app.
2. As you may know, Chainfire just updated SuperSU to v1.44 in order for it to work on Android 4.3.
My question is this:
My device hasn't taken the Android 4.3 OTA update yet; when it does come, is it possible to use supercurio's Voodoo OTA RootKeeper app to preserve root, since it will be keeping Chainfire's latest SuperSU?
In Play store, voodoo ota rootkeeper says it is not updated for 4.3 and will not keep root.
Ah, the only place I haven't checked
Thanks though!
I can confirm it doesn't work.
Sent from my Nexus 7 using Tapatalk 2
What about chainfire's super su pro with OTA survival? He did recently update it to 1.44 to address some 4.3 bugs.
Sent from my Nexus 7 using Tapatalk HD
MightyT01 said:
What about chainfire's super su pro with OTA survival? He did recently update it to 1.44 to address some 4.3 bugs.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
I've just written them an email asking for this. Let's wait an answer...
looking for a keep root solution like this too..
Sent from my Nexus 7
MightyT01 said:
What about chainfire's super su pro with OTA survival? He did recently update it to 1.44 to address some 4.3 bugs.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
I had that prior to my OTA. My OTA failed, but SuperSU still alerted me that it saved my root after I forced a reboot.
Just reflash the latest SuperSU zip, no big deal.
khaytsus said:
Just reflash the latest SuperSU zip, no big deal.
Click to expand...
Click to collapse
It's not updated yet but +1 on this. Install recovery using goo manager. Manually reboot recovery and Just flash superuserzip
Sent from my Nexus 4 using xda app-developers app
I've tried updating from OTA but I get the dead android error message in the flashing process. I had the device rooted and DPI set to 160 but I changed it back to 213 prior to trying to update via OTA. I also removed root via the Full Unroot of the chainfire SuperSU. Any ideas why I'm getting this ? The error i'm getting looks like http://4.bp.blogspot.com/-G-zGeRL92...6FM/s320/Android+Factory+Reset+Tutorial+2.jpg
allblackt said:
I've tried updating from OTA but I get the dead android error message in the flashing process. I had the device rooted and DPI set to 160 but I changed it back to 213 prior to trying to update via OTA. I also removed root via the Full Unroot of the chainfire SuperSU. Any ideas why I'm getting this ? The error i'm getting looks like http://4.bp.blogspot.com/-G-zGeRL92...6FM/s320/Android+Factory+Reset+Tutorial+2.jpg
Click to expand...
Click to collapse
Fixed it myself. Downloaded the update from the dedicate thread [REF] Nexus 7 Stock OTA URLs and tried to sideload it with ADB and noticed I had an error message regarding the checksum of debuggerd. So I found a debuggerd with matching checksum ( from here http://forum.xda-developers.com/showthread.php?t=2379430&page=2 ), put it in place and everything was able to update. The update process ended in a bootloop but that's another story which got a happy ending: updated via fastboot with the stock image from the Google repository. More details on how to update here: http://www.androidpolice.com/2013/0...-to-android-4-3-jwr66v-and-root-it-right-now/ - Scenario 2)
I don't get why Google doesn't release Nexus devices with full root support from stock...
minisergium said:
I don't get why Google doesn't release Nexus devices with full root support from stock...
Click to expand...
Click to collapse
Well, for one thing it would mean blocking ads would be easy and that's the major source of revenue for Google, so I can understand why they wouldn't want to do that.
Sent from my SGH-I747M using xda app-developers app
Kid_droid said:
It's not updated yet but +1 on this. Install recovery using goo manager. Manually reboot recovery and Just flash superuserzip
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Is that a way to root my 4.3 N7?
I'm OTA stock, bootloafer unlocked and unrooted. Any tips?
Sent from my Nexus 7 using XDA Premium HD app
well I lost root and my custom recovery after flashing 4.3 ota and chainfire supersu via CWM ....getting new n7 so don't really care I guess could just flash recovery with nexus toolkit and then supersu...
Sent from my Nexus 7
nolook said:
well I lost root and my custom recovery after flashing 4.3 ota and chainfire supersu via CWM ....getting new n7 so don't really care I guess could just flash recovery with nexus toolkit and then supersu...
Sent from my Nexus 7
Click to expand...
Click to collapse
Are you sure this works?
I mean: Flashing a custom recovery like TWRP with a toolkit and then flashing the right SuperSu with it.
Should work fine.. Has for many others.... However, TWRP is probably better for doing it.
ren2008 said:
Are you sure this works?
I mean: Flashing a custom recovery like TWRP with a toolkit and then flashing the right SuperSu with it.
Click to expand...
Click to collapse
no but have read it works
Sent from my Nexus 7
nolook said:
no but have read it works
Sent from my Nexus 7
Click to expand...
Click to collapse
I can confirm that it works. Did it earlier this morning.
Sent from my HTC Sensation using xda app-developers app
Where is the guide on how to root the att note 3?? best method noob friendly or a video to follow as I don't want to brick my phone.
Sent from my SM-N900T using xda premium
https://www.youtube.com/watch?v=QibUbKlrkOk&feature=youtube_gdata_player
Sent from my SAMSUNG-SM-N900A using xda app-developers app
So I won't be able to install a rom since there won't be a recovery?
Sent from my SM-N900T using xda premium
lulu217783 said:
So I won't be able to install a rom since there won't be a recovery?
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
You can't flash on this phone but you can use Safestrap to fake flash. There is a huge thread on it in the development section for this phone.
Which thread I wasn't able to find it
Sent from my SM-N900T using xda premium
lulu217783 said:
Which thread I wasn't able to find it
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
Not sure where all the people have gone that have an ability to search anymore, but here. It is even stickied in the development thread.
http://forum.xda-developers.com/showthread.php?t=2572978
lulu217783 said:
Where is the guide on how to root the att note 3?? best method noob friendly or a video to follow as I don't want to brick my phone.
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
Even works on new updated firmware At&t pushed out.
N900AUCUBMJ5
Kingo is updated http://www.kingoapp.com/. They have more updates coming.
Lot of people now trust this method and It is one of the only ways to root right now.
I am using this method and have been since it came out.
11/26/13 On a warranty replacement with latest Kingo Root and firmware.
No problems what so ever, phone is perfect so far.
This method is so much faster and works perfectly.
Confirmed and working great on AT&T Note 3.
Does not trip the knox counter.
(It does show Custom Status but you can change it)
No factory reset, and no wiping data !!!!!!
One Click and your done.
SUPERSU
After that you can install XposedInstaller and WANAM.
There are some kool things you can do with that.
For one > Make it show Official Status instead of Custom.
My phone is sicker now !!!!!!! SWEET
Wanam Xposed
I have rooted my SM-N900A with Kingo root. I installed Exposed. And I have installed the Wanam module for Xposed. Under Security hacks, I have checked Fake system status. However, on reboot, it still says custom. Can anyone tell me what I am doing wrong? Or what else I might need to do?
Make sure Wanam exposed is checked off inside of xposed installer under the modules section that will fix your problem if not try updating installer then will work "you do know you need installer correct
Sent from my SAMSUNG-SM-N900A using xda app-developers app
---------- Post added at 11:54 PM ---------- Previous post was at 11:49 PM ----------
Sorry I over read part where u said u had installed installer
Sent from my SAMSUNG-SM-N900A using xda app-developers app
yammizz said:
Make sure Wanam exposed is checked off inside of xposed installer under the modules section that will fix your problem if not try updating installer then will work "you do know you need installer correct
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Yes. I installed it first. Downloaded .apk from XDA. Then downloaded Wanam from Play store. I checked the wanam module in Xposed. Rebooted. Still said custom. Went in and unchecked Fake system status. Rebooted. Checked Fake system status. Rebooted. Still shows custom. Should I uninstall wanam module, reinstall, and check it in xposed before trying to make any changes? Thank you for your help.
I'm trying to think what I did but how I explained in post I swear worked for me cuz I had same problem sorry can't be more of assistance
Sent from my SAMSUNG-SM-N900A using xda app-developers app
yammizz said:
I'm trying to think what I did but how I explained in post I swear worked for me cuz I had same problem sorry can't be more of assistance
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Not a problem. You did help. You told me about activating the module in Xposed. But I did fix it. I uninstalled wanam, downloaded and installed from the play store again. Then I checked it in Xposed, opened wanam, checked fake status and rebooted. It works now. Thank you for your help.
Glad you got it working
Sent from my SAMSUNG-SM-N900A using xda app-developers app
all those who used kingo root. what will happen when 4.4 comes out in a few weeks? will we be able to update? im on the most recent release with kingo root.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
No one knows yet...
Best bet would be upgrade your super user to pro and tell it to attempt to hang onto root when upgrading.
Sent from my XT907 using xda app-developers app
Has it been confirmed we will get 4.4 soon?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
hallettguy said:
all those who used kingo root. what will happen when 4.4 comes out in a few weeks? will we be able to update? im on the most recent release with kingo root.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
From what I heard 4.4 is several months away for AT&T users. AT&T is usually about 6 months behind the initial release of an Android version.
As for the root, King can be uninstalled simply bu going into settings for Super User. Once uninstalled the phone is returned to non-root stock. Then you can run the OTA once it comes. After the update, re-rooting will be the big question. Will Kingo still work? Who knows. Maybe AT&T will lock us down even tighter with that release.
Hi guys, how can i Update OmniRom to the latest version? Because if i checked the update in setting option in my phone it says that the phone is already updated to the latest version
Sent from my GT-I8190 using XDA Premium 4 mobile app
roccaro96 said:
Hi guys, how can i Update OmniRom to the latest version? Because if i checked the update in setting option in my phone it says that the phone is already updated to the latest version
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can't update this ROM via OTA Go to golden-guy's mediafire account, download the latest build from there and install it via recovery (you don't need to wipe anything, just flash it)
Thanks!
I have successfully updated my Moto X to lollipop.. I was would like to root my phone now but I have a question..
If I root my phone now.. How will I get the future updates??
I have rooted my previous phones but there I could get updated roms with updated system version.. But here I don't see any roms..
Thanks in advance.
Sent from the future...
As long as you don't change any of the system files you will get the updates. If you flash other Roms you have to use their updates or flash back to stock to take the update.
Sent from my Nexus 7 using XDA Free mobile app
Duffmantp said:
As long as you don't change any of the system files you will get the updates. If you flash other Roms you have to use their updates or flash back to stock to take the update.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
But if I update with official Ota won't I lose my root access??
Sent from the future...
Yes but CF will update his root tool and just fastboot boot again.
Sent from my Nexus 7 using XDA Free mobile app
Hello, i'm new in this forum and i haven't flashed so many roms before.
in this tutorial:
http://forum.xda-developers.com/att...w-to-update-to-g870aoc5-5-0-keeproot-t3083841
they use flashfire to install lollipop rooted rom into G870A devices.
but i have a problem, i followed the steps to receive flashfire beta on my device but i never got it, i asked in g+ page to someone to share me the apk containing flashfire beta (the version that is required to do this), but he said me i have to change the date of my phone to july 1st because the app does not open at all, and it is true, by changing the date i was able to open the app, but i;m not sure about using it because i thing it is not the right version and i thing i can damage my device.
Can i use twrp instead? or is it safe to use the apk he shared to me?
Thanks
Much to the dismay of almost everyone here Twrp will not work on our locked bootloader phone.
Give a read here. http://forum.xda-developers.com/showthread.php?t=2969344
Sent from my SAMSUNG-SM-G900A using Tapatalk
You havd at&t s5 active ,at&t locked the bootloader thats why we can't use custom recovery like twrp cwm . if u r in 4.4.2 kitkat i think u can use safestrap recovery..that process will install 5.0 rooted lollipop .i use the same process to update my att s5 to lollipop ..download the file flash through flasfire..
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
thanks! i'll ty that i hope it works.
but before trying this i, does anyone successfully installed the last flashfire beta? please would you share the apk, i would prefer using that since the tutorial looks very easy, im new using those kind of tools
I just used the latest beta to flash from rooted 4.4.4 to 5.0.1 Of3 without issue.
Sent from my SAMSUNG-SM-G900A using Tapatalk
my problem is that i were not able to receive beta, does the latest google play public release work?
https://mega.nz/#!RdgzgQJC!V8CjC6U-vlSJdGQHI3DGuH839XUjaZfv2iff7MFJbuA
Here is the link ...
Sent from my SM-N910F using XDA Free mobile app
Thank you leoishwor10!!
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app