[Q] P1000 stays at boot screen after installing CM11 - Galaxy Tab Q&A, Help & Troubleshooting

I upgraded my P1000 from cm-10.1-20131117-NIGHTLY-p1.zip to cm-11-20131210-NIGHTLY-p1.zip
After the update it was kinda working fine. Gapps did not work yet since I did not upgrade that yet, so I installed pa_gapps-full-4.4-20131126-signed.zip.
And rebooted.
That's where the trouble started.
Apps crashed and the P1000 did not startup fine.
I decided to do a full wipe, cleared all caches and re-flashed the P1000.
I does not start anymore (stays on the CM11 boot screen).
What did I miss?

It's not your fault.
It's many different but similar errors in past few days on experimental CM11 builds.
Read http://forum.xda-developers.com/showthread.php?t=2560605 for example.

MarviXDA said:
It's not your fault.
It's many different but similar errors in past few days on experimental CM11 builds.
Read http://forum.xda-developers.com/showthread.php?t=2560605 for example.
Click to expand...
Click to collapse
Thanks,
It seems I updated to CM11 a bit to early, having confidence
If there is someone having a glorious idea...I'm open to those, hehe....

I flashed back to cm10... Maybe it was a bit too early to go to CM11....
This thread can be closed

brenzef said:
I flashed back to cm10... Maybe it was a bit too early to go to CM11....
This thread can be closed
Click to expand...
Click to collapse
Your original problem was using PA GAPPS full. Its to big for the /system partition. You should use one of the BaNkS Gapps versions instead. CM11 runs extremely well on SGT 7, especially after switching to ART.

ulev said:
Your original problem was using PA GAPPS full. Its to big for the /system partition. You should use one of the BaNkS Gapps versions instead. CM11 runs extremely well on SGT 7, especially after switching to ART.
Click to expand...
Click to collapse
That was a very good tip!!!!!
THANKS, upgraded to CM11 with BaNkS Gapps.
+1

brenzef said:
That was a very good tip!!!!!
THANKS, upgraded to CM11 with BaNkS Gapps.
+1
Click to expand...
Click to collapse
Glad I could be of help.

Related

[Q] CM10.2 Play Fail.

Hi,
I have upgraded from CM 10.1 to CM10.2 and have hit a couple of problems.
Play music keeps on "Stopping" when I try to launch.
The Play store fails whenever I try to update an app or install a new app.
I flashed 4.3 GAPP's and installed SU 1.51 and re-rooted.
Any ideas?
Steve
Rassilon7 said:
Hi,
I have upgraded from CM 10.1 to CM10.2 and have hit a couple of problems.
Play music keeps on "Stopping" when I try to launch.
The Play store fails whenever I try to update an app or install a new app.
I flashed 4.3 GAPP's and installed SU 1.51 and re-rooted.
Any ideas?
Steve
Click to expand...
Click to collapse
Tried clearing play store and play services data?
Happened to me on asylum's with 4.3 gapps as well.. Either stuck at downloading or installing. Clearing data helps but after a while the problem comes back again.
seahorsepip said:
Tried clearing play store and play services data?
Click to expand...
Click to collapse
Hi,
Thanks for getting back to me. I didn't try that, but assumed (incorrectly) that flashing GAPPS would overwrite the cache.
I've rolled back to CM10.1 for a few weeks until there are a few more releases. Loving CM 10 so much, and Focal is pretty cool too.
Steve
yeah i am getting this issue with 10.1 as well except clearing data does not work, also how did you go to 10.2 and re-root i am not sure what to do for that
Rassilon7 said:
Hi,
Thanks for getting back to me. I didn't try that, but assumed (incorrectly) that flashing GAPPS would overwrite the cache.
I've rolled back to CM10.1 for a few weeks until there are a few more releases. Loving CM 10 so much, and Focal is pretty cool too.
Steve
Click to expand...
Click to collapse
Using cm10.1 too on my nexus 7 and xperia z simply because cm10.2 isn't stable enough for me yet
the only thing you need to do now..... is reflash the whole thing.... i was also encountering the same issue..... flashed the boot.img from it and flashed the rom again... no need for flashing the root update and all.....
awesome thing...
seahorsepip said:
Using cm10.1 too on my nexus 7 and xperia z simply because cm10.2 isn't stable enough for me yet
Click to expand...
Click to collapse
I finally went back through the process and this time I cleared out the cache for Play and Music and it all worked perfectly. Seems stable enough too.
Thanks for the suggestions guys.

[Kernel] 4.2.2 ION/PMEM

This is taken from cars1198 cm10.1 rom. ALL CREDITS TO HIM all i did was extract it out for others to use on other 4.2.2 based roms.
CLARIFICATION UPDATE:
PMEM BASED ROMS wifi and camcoder breaks. Everything else should work including newer maps and better 3d performance.
ONLY ROMS THAT ARE ION BASED ARE IN MASS CM BY CARS1198
AND JFBS CM11
http://d-h.st/AtF
TripFX said:
This is taken from cars1198 cm10.1 rom. ALL CREDITS TO HIM all i did was extract it out for others to use on other 4.2.2 based roms. I have tested it on AOIP 1.5 and it works fine aside from camcorder. Thanks cars1198
http://d-h.st/AtF
Click to expand...
Click to collapse
Very nice! I'm not sure what I did, but the camcorder apparently now works on my CM 10.1 install. The first recording played back garbled, but now it records perfectly. Maps should now work great on 4.2 roms.
Jorge_007 said:
Very nice! I'm not sure what I did, but the camcorder apparently now works on my CM 10.1 install. The first recording played back garbled, but now it records perfectly. Maps should now work great on 4.2 roms.
Click to expand...
Click to collapse
it does i just test it. ill see if camcorder works in aoip. did noticed that wifi is broke in aoip but i dirty flashed. will test clean install later tonite. working on cm11 fix now.
TripFX said:
it does i just test it. ill see if camcorder works in aoip. did noticed that wifi is broke in aoip but i dirty flashed. will test clean install later tonite. working on cm11 fix now.
Click to expand...
Click to collapse
Wifi worked on CM 10.1, so a clean flash may solve your problem. Good luck on the fix
---
I tested a clean install of AOIP and Wi-Fi is broken. For those of you who want to try CM 10.1 with ION/PMEM here is the link to the download. "http://d-h.st/8QA"
Jorge_007 said:
Wifi worked on CM 10.1, so a clean flash may solve your problem. Good luck on the fix
---
I tested a clean install of AOIP and Wi-Fi is broken. For those of you who want to try CM 10.1 with ION/PMEM here is the link to the download. "http://d-h.st/8QA"
Click to expand...
Click to collapse
thanks for the test. wondering about aokp if wifi will break or not.
TripFX said:
This is taken from cars1198 cm10.1 rom. ALL CREDITS TO HIM all i did was extract it out for others to use on other 4.2.2 based roms. I have tested it on AOIP 1.5 and it works fine aside from camcorder. Thanks cars1198
http://d-h.st/AtF
Click to expand...
Click to collapse
I am psyched to try it with Slimbean. To flash a new kernel, do I need to wipe anything first, or is a dirty flash sufficient? I will make a nandroid first, just to make sure everything is copacetic. Exactly what does ION/PMEM give us that we did not have? Besides finally being able to upgrade to the latest build of Maps?
Proud2banoob said:
I am psyched to try it with Slimbean. To flash a new kernel, do I need to wipe anything first, or is a dirty flash sufficient? I will make a nandroid first, just to make sure everything is copacetic. Exactly what does ION/PMEM give us that we did not have? Besides finally being able to upgrade to the latest build of Maps?
Click to expand...
Click to collapse
some 3d games i got to try work better. dirty flash should be fine. report any errors you find with slimbeam so i can add it to notes
TripFX said:
some 3d games i got to try work better. dirty flash should be fine. report any errors you find with slimbeam so i can add it to notes
Click to expand...
Click to collapse
Well, I just installed it and it seems fine. The phone is definitely faster. I will try to upgrade maps. Skype I'm leaving with the old version for other reasons.
It's like a new phone.... So smooth and fast. Wow! Still restarts if I try to start USB download mode, but I suspect I would have to reload the rom to fix that and it's not a big enough problem. It's too bad I lost my little startup screen android, but such is life.
Oops. Wi-Fi is no good. I will see if I hit the 4g ceiling. I suspect I will. Last time I went without Wi-Fi I hit the ceiling in a week. I don't want to wipe anything before I install, as this is my work phone.
Camera works but camcorder does not. So, seemingly the same problems others have had. I honestly did not try the camcorder with the old kernel, though.
Sent from my SGH-T679 using xda app-developers app
Proud2banoob said:
Well, I just installed it and it seems fine. The phone is definitely faster. I will try to upgrade maps. Skype I'm leaving with the old version for other reasons.
It's like a new phone.... So smooth and fast. Wow! Still restarts if I try to start USB download mode, but I suspect I would have to reload the rom to fix that and it's not a big enough problem. It's too bad I lost my little startup screen android, but such is life.
Oops. Wi-Fi is no good. I will see if I hit the 4g ceiling. I suspect I will. Last time I went without Wi-Fi I hit the ceiling in a week. I don't want to wipe anything before I install, as this is my work phone.
Camera works but camcorder does not. So, seemingly the same problems others have had. I honestly did not try the camcorder with the old kernel, though.
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
using 10.1cm cars1198 cm mass op works perfectly camcorder, wifi, and all which is where i took this kernel from.
TripFX said:
using 10.1cm cars1198 cm mass op works perfectly camcorder, wifi, and all which is where i took this kernel from.
Click to expand...
Click to collapse
Annoying I can't get wifi to work. I guess Slimroms took out a key component when they made the rom "slimmer."
Proud2banoob said:
Annoying I can't get wifi to work. I guess Slimroms took out a key component when they made the rom "slimmer."
Click to expand...
Click to collapse
no its the same with aoip and aokp and im sure others as cars mentioned it was for ion based roms.
Proud2banoob said:
Annoying I can't get wifi to work. I guess Slimroms took out a key component when they made the rom "slimmer."
Click to expand...
Click to collapse
Most definitely not that is ur dev n kernels problem
HERCULES S²
Maybe slims kernel has issues or maybe a bad flash. Try reflashing or another gapps. People are having problems with kernels/gapps on the jfbs rom.
helppppp
the kernel filee is missing im on a cm 10.1 and i want a good kernel so i can optimize my phone ..... please help
Andresakapaco04 said:
the kernel filee is missing im on a cm 10.1 and i want a good kernel so i can optimize my phone ..... please help
Click to expand...
Click to collapse
its old you are much better off getting the cm10.1 rom from cars1198 cm mass op. all 3 versions are on there 10.1, 10.2 and 11

Any stable ROM?

I am currently running ancient cm10.1 20130604 nightly for last several months. I tried to upgrade a few times to 4.3 but had stability issues and went back to this ROM, which is more stable than others though power loss in sleep is still a concern along with BT.
Any recommendation on a more stable ROM? The Kitkat build looks juicy but my kid uses this tablet mainly and he gets upset if the battery dies too quickly or the system crashes
Thanks for any comments.
By the way, any way to see the partition sizes? I think I increased the system partition to 512MB before installing 4.3 but don't remember now.
Found Partition in Play store. Worked like a charm. I only have 393MB in /system and /data 3527MB. I guess going back to 10.1 restored the partition table as well.
I'd say just grab the latest version of 10.1 (2014-01-13). There's not too much of an advantage for 10.2 or 11. The cm11 3.0 kernel version is also close, but things like mic and camera are still broken.
scy1192 said:
I'd say just grab the latest version of 10.1 (2014-01-13). There's not too much of an advantage for 10.2 or 11. The cm11 3.0 kernel version is also close, but things like mic and camera are still broken.
Click to expand...
Click to collapse
Is bluetooth suppost to be working in that version? I can't seem to get it to turn on...
Update from CM9
Hi @scy1192,
I'm using CM 9 should i format to update to CM10.1 or just a flash?
Does the battery lasts long compared to CM 9?
Prasanna_bng said:
Hi @scy1192,
I'm using CM 9 should i format to update to CM10.1 or just a flash?
Does the battery lasts long compared to CM 9?
Click to expand...
Click to collapse
I'd say flash it and if you have any problems, do a factory reset. No use getting rid of all your data if it's not harming anything, but then again there might be some odd thing that breaks when upgrading.
As for battery, I personally found it better on CM10.1 than CM9.
Thanks
scy1192 said:
I'd say flash it and if you have any problems, do a factory reset. No use getting rid of all your data if it's not harming anything, but then again there might be some odd thing that breaks when upgrading.
As for battery, I personally found it better on CM10.1 than CM9.
Click to expand...
Click to collapse
Thanks scy1192. I'll try it tonight.
I'm using cm11 by milaq. Its very stable and I use it as my work tablet
Sent from my TouchPad using xda app-developers app
How do you think 10.1's battery life? The wifi can wake up by itself after sleep? (it cannot in CM9)
frostysnowman said:
I'm using cm11 by milaq. Its very stable and I use it as my work tablet
Sent from my TouchPad using xda app-developers app
Click to expand...
Click to collapse
Using Flintmans nondata cm11, runs fine but BT support isn't complete yet, keyboards work though
rexian said:
I am currently running ancient cm10.1 20130604 nightly for last several months. I tried to upgrade a few times to 4.3 but had stability issues and went back to this ROM, which is more stable than others though power loss in sleep is still a concern along with BT.
Any recommendation on a more stable ROM? The Kitkat build looks juicy but my kid uses this tablet mainly and he gets upset if the battery dies too quickly or the system crashes
Thanks for any comments.
By the way, any way to see the partition sizes? I think I increased the system partition to 512MB before installing 4.3 but don't remember now.
Click to expand...
Click to collapse
I am using http://forum.xda-developers.com/showthread.php?t=2450358, no problems for me
stable rom
HI
I'm using CM11 Milaq and its very stable. There's still some things that aren't working. Like camera,Netflix version 3.x..etc. Buts its a very stable build. The best build I ever had installed that was really stable and ever thing worked, was evervolv CM10.2. This ROM was really good and stable I don't remember ever having any problems with it at all.

update bootloader

Im running an mb886 using the CM11 and Carbon nightlys. ive been using the CM11 JBBL nightlys and was wondering if there is any reason to jump up to a KKBL. and if so is there a guide. alas the search feature did nothing for me.
disregard i found it.
disappointing that i cant move to the KKBL.
currently I have carbonrom on my phone. do the CM11 nightlys for JBBL mirror the other ones or are they behind?
oscar the grouch said:
currently I have carbonrom on my phone. do the CM11 nightlys for JBBL mirror the other ones or are they behind?
Click to expand...
Click to collapse
CM11 nightlies are based on the same build for both JBBL and KKBL bootloaders. The build server runs every night and uses the same code base for both of them.
p.s. If you're ever in doubt, you can always check the changelogs for both the JBBL and KKBL builds.
Thank you.
I tired the aospb build rom earlier. For some reason it kept giving me unfortunately blah blah quit. Apparently my itialian input method. (Not Italian) kept shutting off. And everything I tried from my titanium backup and the playstore crashed every time I opened it. Can't ask inthe rom thread so I sent back to carbon. Any thoughts
oscar the grouch said:
Thank you.
I tired the aospb build rom earlier. For some reason it kept giving me unfortunately blah blah quit. Apparently my itialian input method. (Not Italian) kept shutting off. And everything I tried from my titanium backup and the playstore crashed every time I opened it. Can't ask inthe rom thread so I sent back to carbon. Any thoughts
Click to expand...
Click to collapse
Sorry, but I have no idea what you're trying to say. I've used both Carbon and CM11 on my phone without issue (currently on CM11 nightly).
If I had to take a wild guess about your issue with Playstore crashing, you probably need a newer/more compatible version of the Google Apps installed. Not sure what you installed, but the PA Gapps are always up to date. Start with the Mini or Micro packages and work from there.
Or ask a new question in the Q&A forum.
I was using the pa micro. Still am. Something about the aospb rom didn't like me. I flashed it with out gapps and it still.crashed every non system app. It was better when not running the app data on a partition but still not good. Currentlyrunning the carbon nightly with zero issues
oscar the grouch said:
I was using the pa micro. Still am. Something about the aospb rom didn't like me. I flashed it with out gapps and it still.crashed every non system app. It was better when not running the app data on a partition but still not good. Currentlyrunning the carbon nightly with zero issues
Click to expand...
Click to collapse
With some ROMs, I was having an issue with the dialler whereby I would need to press the # key three times in a row to get the keypad to appear. Have you ever experienced this issue?
audit13 said:
With some ROMs, I was having an issue with the dialler whereby I would need to press the # key three times in a row to get the keypad to appear. Have you ever experienced this issue?
Click to expand...
Click to collapse
have not. that is weird. how do you get a #key with out a dial pad tho?

Does the (Official Cyanogenmod 11) works on (D-415)? YES!

JTC3 said:
Do the latest nightly builds work with the D415?
Click to expand...
Click to collapse
Yes, the official Cm 11 works with the (D-415).... Use the D-415 Cm 11 patch
Aslo, when updating Cm 11..... Use the patch
Crystal Pa ROM work, but there some bugs.....
Crystal Pa: https://drive.google.com/file/d/0Bx2...ew?usp=sharing on page 2
Try Shoxxy, new recovery (2.8.4.0 testbuild) for encryption on Lollipop Cm 12
Thanks, Shinobisoft for patch:
https://docs.google.com/file/d/0B128X29fW1qecm94c1NUMXVCSzA/edit?usp=docslist_api
Also if anybody want CM OnePlus lockscreen, I have a zip :good: It also work on Pac Rom
Razer206 said:
Yes, the official Cm 11 works with the (D-415).... Use the D-415 Cm 11 patch
Aslo, when updating Cm 11..... Use the patch
Patch works on Candy ROM also :good:
Try Shoxxy, new recovery (2.8.4.0 testbuild) for encryption on Lollipop Cm 12
Thanks, Shinobisoft for patch:https://docs.google.com/file/d/0B128X29fW1qeakdEMVA1WW5HRkE/edit?usp=docslist_api
Click to expand...
Click to collapse
Which patch are you referring to to patch Candy 5? As far as I know, @shinobisoft 's patch only works for CM 11 based roms.
ardentis said:
Which patch are you referring to to patch Candy 5? As far as I know, @shinobisoft 's patch only works for CM 11 based roms.
Click to expand...
Click to collapse
Last I remembered, I flash Crystal ROM..... Month ago, so I was mistaking �� The ROM works but some settings dont.
Patch file 404, fail.
It wouldn't load for me either, it says
"Sorry, the file you have requested does not exist.
Please check the address and try again. ".
How bad is the camera on CM? From what I understand the camera for the L90 isn't working properly under CM11, taking poor quality photos. Are there any other issues? I love CM but a stripped factory ROM is working great right now on my D415.
bassic said:
How bad is the camera on CM? From what I understand the camera for the L90 isn't working properly under CM11, taking poor quality photos. Are there any other issues? I love CM but a stripped factory ROM is working great right now on my D415.
Click to expand...
Click to collapse
I have a D415 running the latest nightly build of official CM11, with BigMajster's patch. Here are the major issues I've encountered so far:
Video playback doesn't work for Netflix or NBC, but it works for browser (HTML5), YouTube, and FIOS Mobile.
Camera doesn't autofocus
Bluetooth streaming cuts out frequently
Random reboots (every 2 days or so)
It's worth noting that the battery life is fantastic compared to my Optimus G and iPhone 4S (never used the L90 on stock firmware, so I can't compare builds). My phone rarely goes under 30% before 9PM, and I regularly get 12 hours of battery with 4.5 hours of screen on time (web browsing and streaming video). I barely use my car charger anymore.
Just tried it with last nights NIGHTLY.
still no video recording.
Gps is about 2300 miles off. LOL
Runs smooth. Less glitchy. Feels good. Didn't stick with it long though....
...went back to CM12 for my daily driver..
Running this mornings w7 NIGHTLY (http://get.cm/get/nxh) on my D415.
My God, someone has been putting work in!
The device is smoother, boots much quicker, screen is far more responsive now too!
The three reboots I have done also recognized the SIM faster too. It usually takes about a minute to recognize the network. This time, four seconds! Nice!
It's much less glitchy, again. Lets see of it still über deep sleeps?
Don't know if any of that is from this mornings update, but this device is running much better than it was last night.
When I woke up this morning:
Dirty flashed over existing CM11 system. (With one eye open, still in bed)
Bootloops, my favorite breakfast!
Flashed @BigMajster kernel (patch).
Perfekt again!
Only been running for about 1.5hrs but, it's noticeably better.. I recommend it.
Sent from my CM11 L90-D415 using XDA Free mobile app
Razer206 said:
Also if anybody want CM OnePlus lockscreen, I have a zip :good: It also work on Pac Rom
Click to expand...
Click to collapse
Link to file? I was wondering if it could be ported. Thank you.
jran0880 said:
Link to file? I was wondering if it could be ported. Thank you.
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B-0AY5y9hzZIUWVUazhiZ0FZT0U/edit?usp=docslist_api
That's a copy I keep on my Drive..
It is for D415 L90. This makes official CM11 nightlies boot for the D415.
Flash ROM, flash Patch. Works well.
REMEMBER D415 L90 Optimus.
As far as porting..
Anything can be done, if you just believe....
Sent from my CM12 LolliOptimus D415 via XDA mobile app
jran0880 said:
Link to file? I was wondering if it could be ported. Thank you.
Click to expand...
Click to collapse
This oneplus Lockscreen an audioplayer
https://drive.google.com/file/d/0B128X29fW1qeaEd2Y1MtZm9kLUk/view?usp=sharing
If the zip don't flash, move files using Root browers.
installing cm11 patch
im currently on the 12/1/14 build which was the build given in the cm 11 d-415 forum, but everytime I try to install the cm11 patch3 zip and go to official cm 11 I get a continues bootloop, ive tried every combination of flashing I know, and they all start with clean wipe and ive even done the dirty flash and nogo, any input trying to go to the 3/9/15 build
unlocked BL
twrp up2date
crashpsycho said:
im currently on the 12/1/14 build which was the build given in the cm 11 d-415 forum, but everytime I try to install the cm11 patch3 zip and go to official cm 11 I get a continues bootloop, ive tried every combination of flashing I know, and they all start with clean wipe and ive even done the dirty flash and nogo, any input trying to go to the 3/9/15 build
unlocked BL
twrp up2date
Click to expand...
Click to collapse
The patch only works on Quarx Offical Cm11
https://drive.google.com/file/d/0B128X29fW1qeVEJSS1JDb21xSVU/view?usp=sharing
This is awesome! How about the IR? Still a no for that?
LaDY Vengeance said:
This is awesome! How about the IR? Still a no for that?
Click to expand...
Click to collapse
Yes. For CM11 you need to install the LG IR app and SDK apps that go with it.
There's a thread about it with downloads. I'd blame @shinobisoft for that fix, if I'm not mistaken...
..but it works on CM11 w7 OFFICIAL. As does the Quick button with LG utilities app... Which is a friggen God send!
Sent from my CM12 L90 LollipOptimus D415 via XDA mobile
brossovitch said:
Yes. For CM11 you need to install the LG IR app and SDK apps that go with it.
There's a thread about it with downloads. I'd blame @shinobisoft for that fix, if I'm not mistaken...
..but it works on CM11 w7 OFFICIAL. As does the Quick button with LG utilities app... Which is a friggen God send!
Sent from my CM12 L90 LollipOptimus D415 via XDA mobile
Click to expand...
Click to collapse
I haven't seen such thread, can you point me to it? And as far as I remember, it was demonslayer who mentioned something about fixing IR and testing it
IR
LaDY Vengeance said:
This is awesome! How about the IR? Still a no for that?
Click to expand...
Click to collapse
Miss. Lady I think you got the wrong thread, Demonslayer, says he may have found a fix for IR.....working out bugs :good: but he wont release Rom to almost perfect...... I understand where he coming from what the need of moving on to a new project if you get the same results from the last....
wojtek267 said:
I haven't seen such thread, can you point me to it? And as far as I remember, it was demonslayer who mentioned something about fixing IR and testing it
Click to expand...
Click to collapse
Can't find it. I will though.
But heres the apks in a zip. NOT FLASHABLE!
https://docs.google.com/file/d/0B-0AY5y9hzZINnlILWFINWJTQWc/edit?usp=docslist_api
Extract and install. Then reboot. I used this on CM11 for the D415.
Sent from my KustomDegas[SM-T230NU] using XDA Free mobile app
wojtek267 said:
I haven't seen such thread, can you point me to it? And as far as I remember, it was demonslayer who mentioned something about fixing IR and testing it
Click to expand...
Click to collapse
Haha, read the unofficial CM11 D415 thread. It's in there. Hahahaha!
Sent from my CM12 L90 LollipOptimus D415 via XDA mobile

Categories

Resources