Hey guys quick question just wondering if anyone has had a similar issue with their chromecast setup . This is my second chromecast having the same issue.
I cannot get my phone or computer to complete the setup process. I get an error. See attached picture.
It sees the cast initially and says needs to be setup then after trying to setup I get the error.
Thanks in advance
Devin
dmcgrath009 said:
Hey guys quick question just wondering if anyone has had a similar issue with their chromecast setup . This is my second chromecast having the same issue.
I cannot get my phone or computer to complete the setup process. I get an error. See attached picture.
It sees the cast initially and says needs to be setup then after trying to setup I get the error.
Thanks in advance
Devin
Click to expand...
Click to collapse
Is it setup in your WiFi on your phone?
I can choose to connect to it on the wifi network settings on my phone yes.
Also it shows up in the chromecast app as it needs to be set up
Phone : note 3
Chromecast serial : 3A08xxxxx
Router: D link dir-826l (USING 2.4GHZ band to try and connect)
Picture shows the initial screen i get when opening the app and trying to setup.
The number corresponds to the number on the TV but i can never get further than this.
Sent from my SM-N900P using Tapatalk
Try rebooting your router. This helped me with connection problems in the past.
Sent from my Nexus 7 using Tapatalk 4
I don't think you can setup the Chromecast with your phone. I believe you need a PC to do it. When it's setting up, your PC's WiFi should switch to the Chromecast only; it'lll have some SSID with Chromecast in it. After you confirm the correct Chromecast, it'll do it's setup, and switch the PC WiFi back your LAN.
The error about making sure the Chromecast is nearby means, to me, that the device was not able to connect to the Chromecast. And I think you'll need something that can handle an Ad Hoc setup.
You can set it up with the phone according to the instructions.
I also tried it with the computer and ended up with a similar error during setup.
My next thought is that it could be a issue with the router so I disabled that router and tried an old net gear router I had laying around and that gave me the same issue. From bother the phone and from my laptop (alien ware m11x)
I'm running out of ideas to try
Thanks for the help guys.
Sent from my SM-N900P using Tapatalk
dmcgrath009 said:
You can set it up with the phone according to the instructions.
I also tried it with the computer and ended up with a similar error during setup.
My next thought is that it could be a issue with the router so I disabled that router and tried an old net gear router I had laying around and that gave me the same issue. From bother the phone and from my laptop (alien ware m11x)
Click to expand...
Click to collapse
Don't trust the status in the Chromecast application - check what it says on the TV.
Try using the HDMI extender
Move Chromecast closer to the router, or if it's within 5 feet, farther from the router (constructive and destructive interference)
Move Chromecast away from other Bluetooth and WiFi devices if at all possible
If running setup on a PC, be sure the PC has only the wireless enabled, and no VPN connection running. Multiple adapters and VPN have potential to confuse the setup process.
Make sure your phone is connected to your normal WiFi first
Be sure that MAC filtering and AP isolation are not enabled in your AP/router.
Try a factory reset
lovekeiiy said:
I don't think you can setup the Chromecast with your phone. I believe you need a PC to do it.
Click to expand...
Click to collapse
Actually it's the exact opposite unless your PC has a WiFi card. It requires any device that can run the setup file and that device MUST have WiFi.
In this case I have to wonder if the OP is using a custom ROM. I believe you need to be able to make an AdHoc connection with the Chromecast for setup. Some custom Roms don't support this.
Asphyx said:
Actually it's the exact opposite unless your PC has a WiFi card. It requires any device that can run the setup file and that device MUST have WiFi.
Click to expand...
Click to collapse
If this is the case, nothing is mentioned in/about the Windows PC app.
EDIT: My CC is setup but I installed the PC app and it won't even open and later shows a Turn On WiFi box.
Asphyx said:
In this case I have to wonder if the OP is using a custom ROM. I believe you need to be able to make an AdHoc connection with the Chromecast for setup. Some custom Roms don't support this.
Click to expand...
Click to collapse
AFAIK, it's a standard access point connection, but yeah, custom ROMs could be problematic for other reasons as well.
wptski said:
If this is the case, nothing is mentioned in/about the Windows PC app.
EDIT: My CC is setup but I installed the PC app and it won't even open and later shows a Turn On WiFi box.
Click to expand...
Click to collapse
Yep in order for the setup utility to work on a PC the PC must have a WiFi card in order to communicate via AD HOC with the Chromecast.
It uses AdHoc to control the unit until it has been configured to work with the available AP. Once it is connected to the AP you can use the PC to stream to it without WiFi as long as it is wired to the same network.
But Setup of Chrome requires WiFi. And of course a device that has a compatible setup program to run.
I have Dlink dir 655 and got th same phone . I enabled multicast on dlink router and it worked. Probably after i restarted the router used the chromecast app and connected it smooth
:good:
bhiga said:
AFAIK, it's a standard access point connection, but yeah, custom ROMs could be problematic for other reasons as well.
Click to expand...
Click to collapse
Yes once set up it is a standard AP connection but to set it up to connect to an AP for the first time requires an Ad Hoc connection with the device running the setup program.
Ok thanks for the help guys I'll give another go tonight. Also just for keeping up to date my phone is not rooted and is running a stock rom obviously.
I'll report back to any results.
Sent from my SM-N900P using Tapatalk
I'm having the same problem. I am running a custom ROM on my phone though. I do not have a laptop, only a desktop PC without WiFi.
EDIT: After reading some of the advice in this thread, I went back to my stock ROM to see if I could set it up then. It worked instantly. For me it was the ROM I was on.
Asphyx said:
Yep in order for the setup utility to work on a PC the PC must have a WiFi card in order to communicate via AD HOC with the Chromecast.
It uses AdHoc to control the unit until it has been configured to work with the available AP. Once it is connected to the AP you can use the PC to stream to it without WiFi as long as it is wired to the same network.
But Setup of Chrome requires WiFi. And of course a device that has a compatible setup program to run.
Click to expand...
Click to collapse
Needing to have WiFi on the PC could be an issue for some. Since this point isn't mention anywhere on Google's Chromecast pages that I could find, I'd be annoyed if I found this out after purchase!
wptski said:
Needing to have WiFi on the PC could be an issue for some. Since this point isn't mention anywhere on Google's Chromecast pages that I could find, I'd be annoyed if I found this out after purchase!
Click to expand...
Click to collapse
It is sort of mentioned...It does say connect via WiFi....
Truth is this setup procedure is not all that different than any other Wireless Appliance you would buy.
Wireless Print Servers, WiFi Boosters, all work on the same setup principle.
Unless they can be wired directly into a network it is assumed you will connect to them via AdHoc to then set them up for use with your AP.
There is no way an appliance can connect to an AP that is protected without Human help (would defeat the purpose of having Protection if it could wouldn't it? Anything could do that then). SO barring a Direct connection with a device to set it up the only way to do so is via AdHoc Wireless mode that then lets you communicate to set it up for Infrastructure mode.
Asphyx said:
It is sort of mentioned...It does say connect via WiFi....
Truth is this setup procedure is not all that different than any other Wireless Appliance you would buy.
Wireless Print Servers, WiFi Boosters, all work on the same setup principle.
Unless they can be wired directly into a network it is assumed you will connect to them via AdHoc to then set them up for use with your AP.
Click to expand...
Click to collapse
I just checked with both my phone and laptop. It's a standard Access Point (Infrastructure) connection for setup. Makes sense, as you noted previously that not all devices and ROMs support Ad Hoc mode.
Asphyx said:
There is no way an appliance can connect to an AP that is protected without Human help (would defeat the purpose of having Protection if it could wouldn't it? Anything could do that then). SO barring a Direct connection with a device to set it up the only way to do so is via AdHoc Wireless mode that then lets you communicate to set it up for Infrastructure mode.
Click to expand...
Click to collapse
Devices with can use WPS. But both the AP and the device must support WPS, so much easier and more compatible to either allow a temporary open AP as Chromecast does, or use an Ad Hoc connection.
I had the same problem I was able to get it to connect with laptop on wifi not hard wire once that works then you can use your phone to work chrome cast
Sent from my SGH-M919 using xda app-developers app
Asphyx said:
It is sort of mentioned...It does say connect via WiFi....
Truth is this setup procedure is not all that different than any other Wireless Appliance you would buy.
Wireless Print Servers, WiFi Boosters, all work on the same setup principle.
Unless they can be wired directly into a network it is assumed you will connect to them via AdHoc to then set them up for use with your AP.
There is no way an appliance can connect to an AP that is protected without Human help (would defeat the purpose of having Protection if it could wouldn't it? Anything could do that then). SO barring a Direct connection with a device to set it up the only way to do so is via AdHoc Wireless mode that then lets you communicate to set it up for Infrastructure mode.
Click to expand...
Click to collapse
Yes, it does say that but also states that it's Windows compatible. Connecting to a laptop is mentioned which means anything but a real old one would have WiFi. They clearly have left out mentioning Desktop PC. After setup then using Chrome, a Desktop PC can be used unless you have WiFi card or a WiFi USB adapter which I actually have on my Samsung Smart TV.
Related
I plan to bring my Chromecast with me when I travel, but I imagine the Chromecast will have trouble connecting to the hotel Wifi since most hotels have that gateway page you have to go through before you are actually connected to the internet. Is there an easy way around this without bringing my own router with me?
Thanks!
thenoname said:
I plan to bring my Chromecast with me when I travel, but I imagine the Chromecast will have trouble connecting to the hotel Wifi since most hotels have that gateway page you have to go through before you are actually connected to the internet. Is there an easy way around this without bringing my own router with me?
Thanks!
Click to expand...
Click to collapse
I travel for a living and live about 1/2 of the year in a Marriott.. Here are a few options that I use.
1. Bring a small travel router - this really isn't as bad as it sounds. Is really easy and they make very small ones. Here is what I use: http://www.tp-link.com/en/products/details/?model=TL-MR3020
2. Connect your laptop via ethernet and use windows to share it via wifi. - This works, but it can be a pain. Some VPN clients really don't like this however.
3. Use a MiFi or Cell Phone in Hotspot mode.
I will either do #1 or 3 depending on the hotel and if I am in the US or not.
Hope this helps...
Worse comes to worse you could always use a phone or tablet as a hotspot!
pentafive said:
I travel for a living and live about 1/2 of the year in a Marriott.. Here are a few options that I use.
1. Bring a small travel router - this really isn't as bad as it sounds. Is really easy and they make very small ones. Here is what I use:
Link omitted.
2. Connect your laptop via ethernet and use windows to share it via wifi. - This works, but it can be a pain. Some VPN clients really don't like this however.
3. Use a MiFi or Cell Phone in Hotspot mode.
I will either do #1 or 3 depending on the hotel and if I am in the US or not.
Hope this helps...
Click to expand...
Click to collapse
Thanks for the help! I have Pdanet installed on my gs3, but I haven't been able to set up the Chromecast without a third device in the mix. Using my work laptop is out of the question since I can't install the Chromecast app on it. I don't like to bring my personal laptop along with me on business trips since it's kind of bulky and heavy for a 2 night trip. I have an old Android tablet I can bring along with me to set everything up and control the Chromecast from but it would be awesome if I can get it working with ONLY the gs3 and Chromecast. Is there some way to make that happen? Or will I need a third device in the mix because the gs3 cant be a hotspot and controller at the same time?
I have this same question. I read on the developer site that wireless isolation must be disabled in order to use the chromecast. This could be a problem since most public WiFi has this feature enabled (and if they don't they should!). I have a chromecast, a tablet, and an android phone so if the hotel WiFi doesn't work I can always hotspot with phone and control with tablet. However, this is not ideal since I don't have unlimited data plan. It will be interesting to see how much data the various apps' use. I have 3 trips planned the next 3 weeks and will see how it goes!
Sent from my Nexus 7 using xda app-developers app
thenoname said:
Thanks for the help! I have Pdanet installed on my gs3, but I haven't been able to set up the Chromecast without a third device in the mix. Using my work laptop is out of the question since I can't install the Chromecast app on it. I don't like to bring my personal laptop along with me on business trips since it's kind of bulky and heavy for a 2 night trip. I have an old Android tablet I can bring along with me to set everything up and control the Chromecast from but it would be awesome if I can get it working with ONLY the gs3 and Chromecast. Is there some way to make that happen? Or will I need a third device in the mix because the gs3 cant be a hotspot and controller at the same time?
Click to expand...
Click to collapse
A computer with wifi (a computer just jacked into a router in wont work) is a necessary part of setting up chromecast to a new network.
edit: actually i might be wrong on that, testing something now
---------- Post added at 10:51 PM ---------- Previous post was at 10:31 PM ----------
Okay, this is what I just did.
I turned Wireless Tether on my phone on. This means wifi can't be on at all and thus your phone can't be on the same network as the chromecast, and won't be able to control chomecast.
BUT
I downloaded the Chromecast app from the playstore to my Nook HD+. It found the Chromecast on my home network and I tapped on it, and saw my Chromecast on my home network (which the nook was also on). I was able to change it from my home network to my phone. This changed the network both my Nook and Chromecast were connected to from my home network to my phone network. I just chromecasted netflix from my Nook to my TV via chromecast fine. So basically I was able to set it up on a new network with no need for a computer.
So if you are traveling, I believe you are going to need to set up your Chromecast to know your phone's wifi network/password before you go. Why? Because my Nook (or your tablet) can't change the network of the Chromecast without already being on the same network. But at this point, I could now take the three devices anywhere now, plugging chromecast into a TV, setting up my phone to tether, and using my tablet to control it.
Annoyingly, once I turned off tethering, the chromecast borked and I had to re-run setup to get it back on my home wireless network. So, it doesn't seem to save multiple networks, unless I did something wrong.
thenoname said:
I plan to bring my Chromecast with me when I travel, but I imagine the Chromecast will have trouble connecting to the hotel Wifi since most hotels have that gateway page you have to go through before you are actually connected to the internet. Is there an easy way around this without bringing my own router with me?
Thanks!
Click to expand...
Click to collapse
HERE IS HOW WITHOUT ANY APPLICATION;
do this first:
http://4sysops.com/archives/how-to-share-wi-fi-in-windows-8-with-internet-connection-sharing-ics/
or this:
http://virtualrouterplus.com/
and for enabling Universal Plug and Play:
http://mywindows8.org/how-to-use-dlna-server-in-windows-8/
cabbieBot said:
So if you are traveling, I believe you are going to need to set up your Chromecast to know your phone's wifi network/password before you go. Why? Because my Nook (or your tablet) can't change the network of the Chromecast without already being on the same network. But at this point, I could now take the three devices anywhere now, plugging chromecast into a TV, setting up my phone to tether, and using my tablet to control it.
Click to expand...
Click to collapse
If needed you could always factory reset your Chromecast by holding down the button for 25 seconds. If you do that, you can set it up from the Chromecast app on your nook and set it to your phone's hotspot.
legendnexus said:
HERE IS HOW WITHOUT ANY APPLICATION;
do this first:
Link omitted.
or this:
Link omitted.
and for enabling Universal Plug and Play:
Link omitted.
Click to expand...
Click to collapse
Thanks for the suggestions! The only issue is that I can't install anything on my work laptop. I appreciate the help though =)
You wouldn't want to connect a chrome cast to public wifi anyways. Then the guy in the room next door could mess with your playback. Travel Router/Hotspot are your best bets (plus being on your own network is a better idea for privacy and security anyways).
thenoname said:
I plan to bring my Chromecast with me when I travel, but I imagine the Chromecast will have trouble connecting to the hotel Wifi since most hotels have that gateway page you have to go through before you are actually connected to the internet. Is there an easy way around this without bringing my own router with me?
Thanks!
Click to expand...
Click to collapse
I work for a WiFi company and we manage the WiFi for dozens of hotel chains throughout the nation. If you contact the technical support number provided by the hotel they can "Bypass" your Chromecast. All they would need is the IP address or MAC address of your Chromecast, we'll locate it in the DHCP pool and then whitelist it. This will cause it to bypass the login page.
Vandam500 said:
I work for a WiFi company and we manage the WiFi for dozens of hotel chains throughout the nation. If you contact the technical support number provided by the hotel they can "Bypass" your Chromecast. All they would need is the IP address or MAC address of your Chromecast, we'll locate it in the DHCP pool and then whitelist it. This will cause it to bypass the login page.
Click to expand...
Click to collapse
I am pleasantly surprised that they would be willing to do that. I figured anything that could possibly take away from the built in pay for viewing content would not be allowed. The other problem though is Wireless Isolation; it disables wireless clients from being to able to see/talk to each other on the wireless network. This is a problem for chromecast since the "casting" device must be able to talk to the chromecast in order to cast content to it. Do you know how widely used the wireless isolation feature is in the hotel biz? Also if it is enabled is there a way to whitelist the chromecast and casting device so that they would see each other on the hotel's wireless network?
crc301 said:
I am pleasantly surprised that they would be willing to do that. I figured anything that could possibly take away from the built in pay for viewing content would not be allowed. The other problem though is Wireless Isolation; it disables wireless clients from being to able to see/talk to each other on the wireless network. This is a problem for chromecast since the "casting" device must be able to talk to the chromecast in order to cast content to it. Do you know how widely used the wireless isolation feature is in the hotel biz? Also if it is enabled is there a way to whitelist the chromecast and casting device so that they would see each other on the hotel's wireless network?
Click to expand...
Click to collapse
Ah yeah, forgot about the isolation. Most of our configs are set to not allow wireless devices to allow any type of communication with other devices (Allow traffic between wireless clients)
---------- Post added at 02:54 PM ---------- Previous post was at 02:52 PM ----------
Vandam500 said:
Ah yeah, forgot about the isolation. Most of our configs are set to not allow wireless devices to allow any type of communication with other devices (Allow traffic between wireless clients)
Click to expand...
Click to collapse
I'd say ask to speak with a Tier2 and explain the whole situation. They may very well disable the isolation for at least that one night if you get lucky. This is all if you visit one of the locations that we manage. Not sure about other companies.
I suppose you could plug a computer into the hotel's hardwire Internet and enable wireless Internet Connection Sharing rather than bringing a router, if you will already be bringing a computer anyway.
thenoname said:
Thanks for the suggestions! The only issue is that I can't install anything on my work laptop. I appreciate the help though =)
Click to expand...
Click to collapse
actually there is no need of program on the first linkk
on the second link someone pretty much write a code for the steps on the first link
MAC spoofing
I was wondering if this would work.
If I were to spoof the MAC of the chromecast on my cell phone, connect to the hotel wireless, sign in through the gateway, then un-spoof my MAC and connect again with my real MAC. Wouldn't the gateway whitelist both MACs?
Depends if it is whitelisting off MAC or off IP. Either way, you still have wireless isolation problem. There would need to be some type of cloud based controller built-in to chromecast that could forward commands between chromecast and client(s).
Google...if your listening please develop chromecast cloud controller. That would be awesome
Sent from my Galaxy Nexus using xda app-developers app
Just to update the thread with what I ended up doing. I bought the following travel router off of amazon and it seems to work great! Just in case anyone is looking for one, this one is pretty good. http://www.amazon.com/D-Link-Systems-SharePort-Companion-DIR-505L/dp/B009LENJ90/ref=dp_ob_title_ce
Here is another thread with a similar discussion
thenoname said:
Just to update the thread with what I ended up doing. I bought the following travel router off of amazon and it seems to work great! Just in case anyone is looking for one, this one is pretty good. http://www.amazon.com/D-Link-Systems-SharePort-Companion-DIR-505L/dp/B009LENJ90/ref=dp_ob_title_ce
Click to expand...
Click to collapse
Do these things need a wired connection? Those are becoming rare in hotels. Is there a product that creates a personal wifi network, while getting internet from public wifi?
Chromecast wont connect to my telus router (Actiontec V1000H). I can't see any option to enable/disable AP Isolation. Is there any solution for this?
fixed:laugh:
2237 9525694
mydrl said:
Chromecast wont connect to my telus router (Actiontec V1000H). I can't see any option to enable/disable AP Isolation. Is there any solution for this?
fixed:laugh:
Click to expand...
Click to collapse
How?
try changing the wifi channel the router uses
mydrl said:
Chromecast wont connect to my telus router (Actiontec V1000H). I can't see any option to enable/disable AP Isolation. Is there any solution for this?
fixed:laugh:
Click to expand...
Click to collapse
How did you fix this?
MadBob said:
try changing the wifi channel the router uses
Click to expand...
Click to collapse
Good advice.
Remember that the WiFi bands (channels) are not exactly the same between countries. So if you're in a non-US country and your router happens to choose a channel that is not available in the US, Chromecast may not detect your wireless AP.
But Telus is Canadian, and Canada has the same WiFi channels as the U.S. (Canada and the U.S. necessarily share identical radio spectrum allocation).
DJames1 said:
But Telus is Canadian, and Canada has the same WiFi channels as the U.S. (Canada and the U.S. necessarily share identical radio spectrum allocation).
Click to expand...
Click to collapse
Didn't know that. Thanks! Still applies to other countries though. I think Channel 13 is one of the channels that applies to Europe but not US. I should put it in the FAQ...
EDIT: Seems there's far less exclusion than I thought... but added a note in the FAQ just in case.
http://en.wikipedia.org/wiki/List_of_WLAN_channels
So I can get through the setup phase up until the Chromecast tries to connect to my wifi network. I get a message saying it couldn't connect, and when I click the link in the message it brings me to a page that mentions AP filtering, UPNP enabling and .NET 3.5. I checked and UPNP is enabled, and I can't find an option for AP filtering (I have the Actiontech V1000h). I am using a Macbook pro.
Kipp34 said:
So I can get through the setup phase up until the Chromecast tries to connect to my wifi network. I get a message saying it couldn't connect, and when I click the link in the message it brings me to a page that mentions AP filtering, UPNP enabling and .NET 3.5. I checked and UPNP is enabled, and I can't find an option for AP filtering (I have the Actiontech V1000h). I am using a Macbook pro.
Click to expand...
Click to collapse
In some cases you have to go through a couple of times. I just reset my Chromecast to test a few things and had to go through the setup twice before it connected to my WiFi.
Chromecast in Canada, on Telus
A friend lent me his chromecast. He uses an iphone and Shaw cable. I use a Nexus 4, and have Telus as my internet provider.
It was a bear trying to get chromecast to work. Tried 5 separate days. Got it to work and i could watch netflix/youtube on it about 3 times and played with it for a couple of hours each. That's the success.
The fail is that I had to trouble shoot more then 4+ hours to get it to work those 3 times. Reboot the chromecast. Reboot the router. Reboot my Nexus 4. Try my wife's Nexus 4. Try the Nexus 7 tablet. It was a horrible experience. I got the AP recommendation like the earlier post in this thread. I tried that. Tried calling telus and signed into my router to check that those settings were correct. As far as I understand it's a gateway 11n wireless router.
So my conclusion is change my internet provider to Shaw unless someone has a smart solution to this problem. The router says it's a 50ghz signal? So it isn't the 2.4vs 5.0 ghz signal problem that I've googled and read about.
Please provide some brains to my situation. I've used all of mine up.
bhiga said:
In some cases you have to go through a couple of times. I just reset my Chromecast to test a few things and had to go through the setup twice before it connected to my WiFi.
Click to expand...
Click to collapse
Still not fixed.
So I took the plunge and bought one. Maybe it'd be different than my friends. Looks like this is a me problem. The chromecast still doesn't work. I thought it might be the tv that it's plugged into? Maybe shielding the chromecast from the wifi? I don't know. Will trouble shoot with a different tv or a long hdmi cable that will get the chromecast out from behind the tv. Maybe that'll help.
johnson2423 said:
So I took the plunge and bought one. Maybe it'd be different than my friends. Looks like this is a me problem. The chromecast still doesn't work. I thought it might be the tv that it's plugged into? Maybe shielding the chromecast from the wifi? I don't know. Will trouble shoot with a different tv or a long hdmi cable that will get the chromecast out from behind the tv. Maybe that'll help.
Click to expand...
Click to collapse
TVs are great at blocking/scrambling radio signals.
Use the included HDMI extender. If that doesn't help (enough), get an HDMI extension and move Chromecast away from the TV. One of mine is on a 10-foot HDMI extension. The other is connected upstream of a another device that connects to my TV, so both of my Chromecasts are at least a foot away from its associated TV.
johnson2423 said:
So I took the plunge and bought one. Maybe it'd be different than my friends. Looks like this is a me problem. The chromecast still doesn't work. I thought it might be the tv that it's plugged into? Maybe shielding the chromecast from the wifi? I don't know. Will trouble shoot with a different tv or a long hdmi cable that will get the chromecast out from behind the tv. Maybe that'll help.
Click to expand...
Click to collapse
It could be a few things not related to the router directly but related in how the Router connects to your ISP.
So a couple of questions...
What kind of service is your ISP? (DSL, CABLE, OTHER)
What Public IP does your router report? (Usually found on the status page that shows connection data) If it starts off 192.168 then your Modem is doing a double nat translation and you need to call your ISP and tell them you want the Modem to be put into gateway mode and just pass a public IP to your router.
Does the CCast actually connect to the Router but not work or will it not connect at all period? If it doesn't connect at all it is possible you need to change the Security method used to WPA or WEP. To test shut off security alltogether and try to connect the CCast. If there is currently NO security try putting WPA on and trying again (but it should work on an open AP)
fixed...
Asphyx said:
It could be a few things not related to the router directly but related in how the Router connects to your ISP.
So a couple of questions...
What kind of service is your ISP? (DSL, CABLE, OTHER)
What Public IP does your router report? (Usually found on the status page that shows connection data) If it starts off 192.168 then your Modem is doing a double nat translation and you need to call your ISP and tell them you want the Modem to be put into gateway mode and just pass a public IP to your router.
Does the CCast actually connect to the Router but not work or will it not connect at all period? If it doesn't connect at all it is possible you need to change the Security method used to WPA or WEP. To test shut off security alltogether and try to connect the CCast. If there is currently NO security try putting WPA on and trying again (but it should work on an open AP)
Click to expand...
Click to collapse
Service is Telus DSL.
Solution: I changed the security settings. It still tries to stop the CCast from talking to my phone once in a while, but I just log into my router and log into the firewall settings. The firewall settings are "high, medium, low, NAT". It started working once I started turning it off of NAT and onto Medium or High.
I don't know why this is the solution, but it is a solution. I suspect that either Telus will fix the prolbem for everyone else or this thread will become popular. Now CCast is coming to Canada. So either Telus fixes it or there'll be a lot of searching leading to this post.
As a reminder, a friend of mine on telus never toughed his firewall settings and never had a problem with using his CCast. Go figure.
johnson2423 said:
Service is Telus DSL.
Solution: I changed the security settings. It still tries to stop the CCast from talking to my phone once in a while, but I just log into my router and log into the firewall settings. The firewall settings are "high, medium, low, NAT". It started working once I started turning it off of NAT and onto Medium or High.
I don't know why this is the solution, but it is a solution. I suspect that either Telus will fix the prolbem for everyone else or this thread will become popular. Now CCast is coming to Canada. So either Telus fixes it or there'll be a lot of searching leading to this post.
As a reminder, a friend of mine on telus never toughed his firewall settings and never had a problem with using his CCast. Go figure.
Click to expand...
Click to collapse
Well if the Telus was set to NAT perhaps Double Nat Translation was the issue.
DO you have another router connected to your modem or is this one of those all in one Hybrids supplied by the ISP?
Asphyx said:
Well if the Telus was set to NAT perhaps Double Nat Translation was the issue.
DO you have another router connected to your modem or is this one of those all in one Hybrids supplied by the ISP?
Click to expand...
Click to collapse
I have a friend that is struggling with this as well. While setting up the WiFi connection between the chromecast and the router (the Actiontec V1000H - which is a modem/router combo if that helps). The chromecast will see the WiFi, but it seems to time out while trying to connect to the router.
I did find a comment on a blog somewhere (sorry, I forget where) that suggests unchecking the "IGMP snooping enabled" option in the router (Advanced Settings>IGMP Setting). Once this was done, the chromecast connected to the WiFi without any issues and we were able to stream it without any issues.
However after going out for dinner we had major issues trying to connect to the WiFi on our phones and his laptop (laptop would try to connect to the WiFi but continually fail). It seems like this is a temporary fix at best.
The only permanent solution I can think of at the moment is to go buy a new router that is listed as having no issues on the chromecast compatibility list... Which kind of defeats the whole purpose of having the chromecast as an economic way to stream content to your big screen.
Buy a better router
I don't see why IGMP should have any affect on being able to login and connect.
I Can see it being a problem with streaming but not connection.
IS this an ISP provided Modem/Router? How many devices are connecting wirelessly?
Check settings for IGMP Proxy, Try changing that setting whatever it is but it should probably be disabled (Still don't think this would affect connection but it's worth checking)
Check if UPnP Is enabled (again not really connection related but it does need to be enabled for CCast)
I personally prefer to use a two device setup with separate Modem (in Bridge Mode) and Router....This way the Modem protects the router from the outside world and even if the Modem goes bad the Network still functions properly.
And I pretty much stay away from anything that isn't a Linksys or Netgear product as far as Routers are concerned.
There are a bunch of Actiontec models that are listed as incompatible with CCast on the google site so it's obvious that something about their firmware is not CCast friendly.
So the the previous poster may actually have made a good suggestion in the long run! LOL
I'm using the telus actiontech router with chromcast with no issues....
its a pretty crappy router though and it seems telus disabled the ability for bridge mode in the latest firmware... has anyone found a solution to this so i can buy a better router?
Sent from my Nexus 7 using Tapatalk
nolook said:
I'm using the telus actiontech router with chromcast with no issues....
its a pretty crappy router though and it seems telus disabled the ability for bridge mode in the latest firmware... has anyone found a solution to this so i can buy a better router?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
As long as double NAT doesn't cause you problems, you can
Assign the new router's WAN port to an address in the ISP router's LAN range
Set the new router's gateway to the ISP router's LAN address
Connect the two routers LAN port to LAN port
Have all your wired and wireless clients connect to the new router.
Hi all,
I have a TP-Link TL-WDR4300 at home. My Chromecast is having issue connecting to this router. When i run through Chromecast setup, it goes fine up to the point where it asks me for password of my router. After I enter my password and click next, my TV would just say 'connecting...' and it will stuck forever. And the Chromecast setup app will say "Something went wrong. We weren't able to find your Chromecast on the network." Apparently because it wasn't able to connect to my network.
I'm pretty sure I have my password entered correctly. I tried to changed my router settings but it won't help at all.
One interesting thing is that my Chromecast used to be able to connect to my router before it was updated(which happened automatically when I connected Chromecast to my router for the last time). Although I had similar connection issues in the past, I was able to fix it by a combination of resetting Chromecast, rebooting router and changing router settings. Now, it just won't connect no matter what I do.
Any help is greatly appreciated!
rozzerhmq said:
Hi all,
I have a TP-Link TL-WDR4300 at home. My Chromecast is having issue connecting to this router. When i run through Chromecast setup, it goes fine up to the point where it asks me for password of my router. After I enter my password and click next, my TV would just say 'connecting...' and it will stuck forever. And the Chromecast setup app will say "Something went wrong. We weren't able to find your Chromecast on the network." Apparently because it wasn't able to connect to my network.
I'm pretty sure I have my password entered correctly. I tried to changed my router settings but it won't help at all.
One interesting thing is that my Chromecast used to be able to connect to my router before it was updated(which happened automatically when I connected Chromecast to my router for the last time). Although I had similar connection issues in the past, I was able to fix it by a combination of resetting Chromecast, rebooting router and changing router settings. Now, it just won't connect no matter what I do.
Any help is greatly appreciated!
Click to expand...
Click to collapse
I would reset everything and then try the setup program again if you haven't tried that already.
When you say "changing router settings", does this include channel width? Is it set to auto? Have you tried setting it to something manually, preferably 20MHz? Also what is your Network Mode set to?
mdamaged said:
When you say "changing router settings", does this include channel width? Is it set to auto? Have you tried setting it to something manually, preferably 20MHz? Also what is your Network Mode set to?
Click to expand...
Click to collapse
Yes. I am using the 2.4GHz wireless only
I tried changing all these setting
Mode: abgn
Channel Width: 20mhz-40mhz
Channel: 1 - 6 - 11
rozzerhmq said:
Yes. I am using the 2.4GHz wireless only
I tried changing all these setting
Mode: abgn
Channel Width: 20mhz-40mhz
Channel: 1 - 6 - 11
Click to expand...
Click to collapse
Have you tried using the HDMI extender? That can help a lot in some circumstances. It's amazing how much a TV and other electronics will interfere with WiFi signals.
rozzerhmq said:
Hi all,
I have a TP-Link TL-WDR4300 at home. My Chromecast is having issue connecting to this router. When i run through Chromecast setup, it goes fine up to the point where it asks me for password of my router. After I enter my password and click next, my TV would just say 'connecting...' and it will stuck forever. And the Chromecast setup app will say "Something went wrong. We weren't able to find your Chromecast on the network." Apparently because it wasn't able to connect to my network.
I'm pretty sure I have my password entered correctly. I tried to changed my router settings but it won't help at all.
One interesting thing is that my Chromecast used to be able to connect to my router before it was updated(which happened automatically when I connected Chromecast to my router for the last time). Although I had similar connection issues in the past, I was able to fix it by a combination of resetting Chromecast, rebooting router and changing router settings. Now, it just won't connect no matter what I do.
Any help is greatly appreciated!
Click to expand...
Click to collapse
I experience the same problem with you
bhiga said:
Have you tried using the HDMI extender? That can help a lot in some circumstances. It's amazing how much a TV and other electronics will interfere with WiFi signals.
Click to expand...
Click to collapse
I never had problems with my old router. So I'm pretty sure it to be a compatibility issue.
I have the same exact router (TL-WDR4300 but running dd-wrt) and have zero issues connecting my 2 chromecasts to it.
One chromecast is running PwnedCast and the other is vanilla on the most current update. The router is running both 2.4 and 5 ghz and both chromecasts are connected to the 2.4 bandwidth.
I am using the extender on both.
rozzerhmq said:
I never had problems with my old router. So I'm pretty sure it to be a compatibility issue.
Click to expand...
Click to collapse
Well does the Chromecast Light blink or is it solid?
If it is solid then it is connected to the router and you have some security setting or firewall either on the router or the PC isolating it from other devices.
Typical issue is when you have mis-selected Public for your network type in Windows instead of HOME,
Public isolates the Windows machine where HOME allows Device to Device communication.
Check the firewall settings on your router and try shutting it off and see if that works. If so then turn it back on and look for other settings like Multicast filtering or IGMP and uncheck.
If the light on the CCast is Blinking then it is not connected and you need to re-run the setup.
You say other devices are seeing it so thats probably not the case.
j.a said:
I have the same exact router (TL-WDR4300 but running dd-wrt) and have zero issues connecting my 2 chromecasts to it.
One chromecast is running PwnedCast and the other is vanilla on the most current update. The router is running both 2.4 and 5 ghz and both chromecasts are connected to the 2.4 bandwidth.
I am using the extender on both.
Click to expand...
Click to collapse
Thanks for the info. I am using vendor firmware atm, will try dd-wrt next.
Asphyx said:
Well does the Chromecast Light blink or is it solid?
If it is solid then it is connected to the router and you have some security setting or firewall either on the router or the PC isolating it from other devices.
Typical issue is when you have mis-selected Public for your network type in Windows instead of HOME,
Public isolates the Windows machine where HOME allows Device to Device communication.
Check the firewall settings on your router and try shutting it off and see if that works. If so then turn it back on and look for other settings like Multicast filtering or IGMP and uncheck.
If the light on the CCast is Blinking then it is not connected and you need to re-run the setup.
You say other devices are seeing it so thats probably not the case.
Click to expand...
Click to collapse
Update: It turns out this is not the root cause of this issue(refer to my post below), i will try dd-wrt next!
Thanks for the suggestions!
By following your advise and checking my security settings again. I was able to solve this issue by turning off VPN firewalls. I don't use any VPN thing so i thought the VPN firewalls wouldn't matter. Anyways, thank you very much and now I can enjoy Chromecast again!
However, there is one annoying thing. When casting from Chrome tabs, it won't go into full screen. There are black bars on top and bottom which isn't there if I cast from Youtube. I tried changing all the Chromecast extension options and Tv aspect ratio setting, but had no success. It would be awesome if you can offer some advice.
Thanks again!:good:
rozzerhmq said:
Thanks for the suggestions!
By following your advise and checking my security settings again. I was able to solve this issue by turning off VPN firewalls. I don't use any VPN thing so i thought the VPN firewalls wouldn't matter. Anyways, thank you very much and now I can enjoy Chromecast again!
However, there is one annoying thing. When casting from Chrome tabs, it won't go into full screen. There are black bars on top and bottom which isn't there if I cast from Youtube. I tried changing all the Chromecast extension options and Tv aspect ratio setting, but had no success. It would be awesome if you can offer some advice.
Thanks again!:good:
Click to expand...
Click to collapse
Go into Options of the Googlecast ext on your Browser
Select Full screen zoom and make sure it is enabled.
But there will always be some content that doesn't format the screen properly and will give you black bars...
Asphyx said:
Go into Options of the Googlecast ext on your Browser
Select Full screen zoom and make sure it is enabled.
But there will always be some content that doesn't format the screen properly and will give you black bars...
Click to expand...
Click to collapse
Well, after all, it was too early to call it a success.
So earlier today, I wasn't able to discover Chromecast from my PC(It says something like "device missing" in Chromecast extension). However, my TV shows Chromecast is connected to my network, and the light on Chromecast is stable white. Then, I tried to reboot my router, and that fixed it. This is basically similar to the issues i had in the past where i could just fix Chromecast connection by randomly rebooting router and resetting Chromecast.
I was skeptical and decided to revert my changes on VPN firewalls. After a router reboot, Chromecast still worked!!
At this point, I don't think it's the VPN firewall settings that is causing this issue. This issue looks so random. I would try to go dd-wrt next and hopefully it will fix this issue properly.
rozzerhmq said:
Well, after all, it was too early to call it a success.
So earlier today, I wasn't able to discover Chromecast from my PC(It says something like "device missing" in Chromecast extension). However, my TV shows Chromecast is connected to my network, and the light on Chromecast is stable white. Then, I tried to reboot my router, and that fixed it. This is basically similar to the issues i had in the past where i could just fix Chromecast connection by randomly rebooting router and resetting Chromecast.
I was skeptical and decided to revert my changes on VPN firewalls. After a router reboot, Chromecast still worked!!
At this point, I don't think it's the VPN firewall settings that is causing this issue. This issue looks so random. I would try to go dd-wrt next and hopefully it will fix this issue properly.
Click to expand...
Click to collapse
You mention DD-Wrt are you using that?
Cause I notice most people having these issues seem to be using DD-WRT or Tomato and I'm starting to wonder if perhaps there is some issues with those Custom Firmwares being used.
I do know in the past before I Upgraded my router that I had problems with devices getting booted off the WiFi because I had too many devices connecting and it would seem that when a new device would connect, one would stop getting data despite the fact it said it was connected.
Now this shouldn't ever be the case with WiFi if it has an IP it should not have a limit but I am wondering if your experiencing what I was experiencing before I Upgraded....
Not suggesting you need to upgrade mind you just that what your going through sounds similar to what I went through.
When I bought the new router (LinkSys N900) the Box had this chart of Router Groups and which router was best for X number of devices.
Low end for less than 3, High end for 7+ with the last group being for 7+ and HD.
This chart went against what I believed I knew about WiFi limitations which I thought was only IP and DHCP based...
I wrote it off as pure Marketing with the intention of getting you to buy the most expensive router they had...(which I was going to do anyway LOL)
I'm starting to wonder if maybe there is something to that....Sure would explain my problems with the router that made me upgrade in the first place.
I'm having the same issues with my chromecast and a tp-link wdr4300 router on dd-wrt (latest build from 2014-02).
After either chromecast or router (wi-fi) restart I'm able to cast and chromecast is also shown in chromecast app.
But after some idling (without casting) chromecast is still connected to my wi-fi (ping responses) but I'm not able to cast anything (music, allcast etc..) anymore.
I have already tried enabling/disabling UPNP, changing wi-fi channels, etc
Doesn't look like just a wi-fi issue only, as chromecast is still connected to my wi-fi.
but still could this be related to the Atheros chipset used in the wdr4300 maybe?
Any other routers with atheros chipset running without problems?
Try installing Bonjour Browser or another mDNS browser and monitor what happens in local._googlecast._tcp
Also check router security and firewall logs to see if things are being blocked corresponding to when the mDNS broadcasts fall off.
Sent from a device with no keyboard. Please forgive typos, they may not be my own.
Seems to be good now for my setup.
I had installed a bonjour browser but couldn't see anything special.
local._googlecast._tcp was present all the time even though I couldn't cast.
I have changed the router firmware from dd-wrt (02-19-2014-r23598) to a self compiled OpenWrt (Barrier Breaker r39770).
I have been able to cast now stable for 4 days. Never had that before on dd-wrt.
nervdoc said:
Seems to be good now for my setup.
I had installed a bonjour browser but couldn't see anything special.
local._googlecast._tcp was present all the time even though I couldn't cast.
I have changed the router firmware from dd-wrt (02-19-2014-r23598) to a self compiled OpenWrt (Barrier Breaker r39770).
I have been able to cast now stable for 4 days. Never had that before on dd-wrt.
Click to expand...
Click to collapse
Thanks for the update. Good to know that OpenWRT is working for you.
I have the same router. Don't recall having any issues on stock firmware. I'm on ddwrt now.
Did that as I plan on converting to extender when I move to the AC router soon.
I can only imagine the Chromecast didn't like something in your settings.
Sent from my SPH-L720 using Tapatalk
"Something went wrong. We weren't able to find your chromecast on the network"
[ this trick worked for me ] .. I had the same issue.. I was trying to connect my lcd remote monitor to my windows 7 pc. In the chromecast setup, I was able to go till the page that asked for the wifi network id and pw.., and later i got the error "Something went wrong. We weren't able to find your chromecast on the network" Many tries and all failed. Later i downloaded the chromecast app in my Android 5.0 smart phone and did the settings and voila! .. it got installed in the first try. Later without factory resetting the chromecast, i reinstalled the chromecast setup in my windows 7 and it got installed without any error. Later i opened up the chrome browser installed the chromecast plugin extension and it worked well. I was able to view my page on my remote monitor. Hope it works for u too..
I used to use the netflix on daily basis until about three weeks ago I started to get the following message after a long time displaying the netflix splash screen on my TV: "Humm... It seems we're unable to connect". And then the netflix closes after 10 seconds. Every other chromecast official app works good, but Netflix. I also noted that if I restore the chromecast and launch netflix, everything will work. But if I cast other app, as YouTube for instance, and then return to netflix, I'll get the problem again, requiring another restore.
My chromecast software version is 16664.
Is anyone experiencing the something like that?
Sent from my HTC One_M8 using XDA Free mobile app
luizm.jr said:
I used to use the netflix on daily basis until about three weeks ago I started to get the following message after a long time displaying the netflix splash screen on my TV: "Humm... It seems we're unable to connect". And then the netflix closes after 10 seconds. Every other chromecast official app works good, but Netflix. I also noted that if I restore the chromecast and launch netflix, everything will work. But if I cast other app, as YouTube for instance, and then return to netflix, I'll get the problem again, requiring another restore.
My chromecast software version is 16664.
Is anyone experiencing the something like that?
Click to expand...
Click to collapse
Just to confirm, you're not using any DNS relocation/redirection (Unlocator, Unotelly, etc), right?
I just used Netflix the other day, and I'm still on 16664.
It's weird that everything else works except for Netflix, and also weird that factory reset makes it work. Could be a bug or perhaps something with WiFi connectivity. You don't have a WiFi repeater or multiple APs using the same SSID do you?
bhiga said:
Just to confirm, you're not using any DNS relocation/redirection (Unlocator, Unotelly, etc), right?
I just used Netflix the other day, and I'm still on 16664.
It's weird that everything else works except for Netflix, and also weird that factory reset makes it work. Could be a bug or perhaps something with WiFi connectivity. You don't have a WiFi repeater or multiple APs using the same SSID do you?
Click to expand...
Click to collapse
I use regular DNS. I also tried different WiFi routers and I always got this issue. Rarely Netflix works without need factory reset.
I was wondering if it could be a problem with the chromecast cache. Do you know a way to clear the cache without factory reseting?
luizm.jr said:
I use regular DNS. I also tried different WiFi routers and I always got this issue. Rarely Netflix works without need factory reset.
I was wondering if it could be a problem with the chromecast cache. Do you know a way to clear the cache without factory reseting?
Click to expand...
Click to collapse
Not that I know of... however, since the Netflix app is stored on Chromecast, there's a small possibility that it's a RAM or NAND issue on your Chromecast itself. If it's not rooted or special in any way, you might want to consider getting it replaced.
Or see if you can borrow another Chromecast to see if the problem is localized to your specific device.
bhiga said:
Not that I know of... however, since the Netflix app is stored on Chromecast, there's a small possibility that it's a RAM or NAND issue on your Chromecast itself. If it's not rooted or special in any way, you might want to consider getting it replaced.
Or see if you can borrow another Chromecast to see if the problem is localized to your specific device.
Click to expand...
Click to collapse
This is new for me. I thought Netflix was loaded online. I'll ask a friend that has chromecast to test mine in his home and and borrow his chromecast.
I'll let you know the results tomorrow.
Thanks
I borrowed a chromecast and first time it worked. After casting YouTube videos and then return to netflix, same thing happened. My friend got everything working great using my chromecast.
The only thing that never changed is my cable modem, but I never change anything on it. Moreover, why this is happening only with netflix and why it works if I factory reset are still a mystery.
Sent from my HTC One_M8 using XDA Free mobile app
luizm.jr said:
I borrowed a chromecast and first time it worked. After casting YouTube videos and then return to netflix, same thing happened. My friend got everything working great using my chromecast.
The only thing that never changed is my cable modem, but I never change anything on it. Moreover, why this is happening only with netflix and why it works if I factory reset are still a mystery.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Perhaps you are seeing the first case of Net Neutrality biting you in the ISP?
See if you can reach Netflix via the browser...
I don't think so. I can access netflix anywhere else: tablet, phone, ps3 and computer. Besides, my friend use the same isp.
The only other place I having trouble in access netflix is my old Asus cube that I had retired since I got the chromecast last year.
Sent from my HTC One_M8 using XDA Free mobile app
luizm.jr said:
I don't think so. I can access netflix anywhere else: tablet, phone, ps3 and computer. Besides, my friend use the same isp.
The only other place I having trouble in access netflix is my old Asus cube that I had retired since I got the chromecast last year.
Click to expand...
Click to collapse
Quite the puzzle...
Since your Chromecast works on your friend's network, and your friend's Chromecast shows the same behavior as yours on your network, the breakage factor definitely seems to be something about your network.
I really can't think of your cable modem being an issue unless isn't going bad (if it has an interface, look for excessive errors and/or poor signal quality - for example, Motorola SurfBoards usually have an interface at http://192.168.100.1/).
As your friend is using the same ISP, I would compare your router settings with his - ISP login type, routing and DNS in particular.
Of course if you have different routers then the router itself is still a variable.
I'll try to share my mobile Internet connection as soon I get back home to see if it will do the same.
Also I'll try to look the router log to see something.
Sent from my HTC One_M8 using XDA Free mobile app
I tested chromecast connecting to my phone in tethering mode. Netflix worked everytime. But when I got back to my regular connection, the problem appeared again.
So the problem seems to be located in my cable modem that also is a router.
Sent from my HTC One_M8 using XDA Free mobile app
Ok first question...do you have another router connected to the Modem Router? Are you using the Modem's built in WiFi or this other router's?
If you have another router then chances are likely you have a double NAT situation which is messing you up.
Check your other router and see what IP address is has listed under Internet connection...If it is a 192.168.xxx.xxx then it's a double Nat and you need to call your Cable company and have them put the Modem into Bridge mode.
If you do not have another router and use only the Modem router then you need to call the cable company and have them change the settings on the router to allow multicast and UPnP...Maybe a few other settings as well. Tell them what you are trying to do they have probably gotten lots of calls from others with the same issue.
Me personally I prefer to use my own router and have them put the Modem into Bridge mode so I have full control over the network and don't need to call them whenever I have a problem or want to change settings.
Asphyx said:
Ok first question...do you have another router connected to the Modem Router? Are you using the Modem's built in WiFi or this other router's?
If you have another router then chances are likely you have a double NAT situation which is messing you up.
Check your other router and see what IP address is has listed under Internet connection...If it is a 192.168.xxx.xxx then it's a double Nat and you need to call your Cable company and have them put the Modem into Bridge mode.
If you do not have another router and use only the Modem router then you need to call the cable company and have them change the settings on the router to allow multicast and UPnP...Maybe a few other settings as well. Tell them what you are trying to do they have probably gotten lots of calls from others with the same issue.
Me personally I prefer to use my own router and have them put the Modem into Bridge mode so I have full control over the network and don't need to call them whenever I have a problem or want to change settings.
Click to expand...
Click to collapse
My cable modem a public IP provided by my ISP, and a private IP that is 192.168.0.1. My router has a WAN IP provided by my cable modem (192.168.0.xxx) and a LAN IP 192.168.1.1. My chromecast used to be connected in my router LAN, but I changed it to connect directly to the cable modem router. I'll try to put the cable modem in bridge mode to see what happens as I have full access to its configuration.
Thanks again
luizm.jr said:
My cable modem a public IP provided by my ISP, and a private IP that is 192.168.0.1. My router has a WAN IP provided by my cable modem (192.168.0.xxx) and a LAN IP 192.168.1.1. My chromecast used to be connected in my router LAN, but I changed it to connect directly to the cable modem router. I'll try to put the cable modem in bridge mode to see what happens as I have full access to its configuration.
Thanks again
Click to expand...
Click to collapse
Yep that setup causes a double Nat situation Which doesn't work well for most networking applications....
Especially since you are also dealing with Two different Wireless networks.
Best setup is to have the modem just be a modem and send public IPs to whatever connects to it.
Then you won't have any Nat translation issues PLUS you get the ability (if your Modem has multiple ports like most Modem/Router Hybrids do, You can get a public IP for any device directly connected to the Modem which is good for running servers and for testing router issues.
Problem solved!
I turned off the wifi on the cable modem and put it on bridge mode, letting my router deal with my network. Netflix is now working good on both chromecast and Google tv.
However I believe the problem was related to a still unknown setting in the cable modem as I left it operating alone and netflix was still not able to load.
Thank you very much for the help. I really appreciate it.
Sent from my HTC One_M8 using XDA Free mobile app
luizm.jr said:
Problem solved!
I turned off the wifi on the cable modem and put it on bridge mode, letting my router deal with my network. Netflix is now working good on both chromecast and Google tv.
However I believe the problem was related to a still unknown setting in the cable modem as I left it operating alone and netflix was still not able to load.
Thank you very much for the help. I really appreciate it.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
it may very well have been a Router issue with the Modem...But now that it is only a Bridge the other router's settings will handle all the communication needed for the CCast and it should work...
As long as the settings on the second router were not the issue in the first place.
So I'm in the army right now, which means there's a TV but no WiFi available.
I did think of just setting up a Hotspot with another phone but it gets pretty annoying having to have 2 people at all time.
So I went digging in the Internet and found someone at a random forum (can't find it now for credit..), that said that If you set up the Hotspot in your own phone and configure it with another one you don't need the other one around anymore - being the Hotspot works as being connected to it.
Now I'm pretty sure there shouldn't be any reason I couldn't set it up on my own phone (the hotspot), except the Google home app just demands I connect to the WiFi network, which I can't do because you can't connect to yourself sadly.
I think if someone made some changes to the Google home app, or made an alternative set up app it could work. I have no idea how to code an app, so I came here ?
tl:dr I Want an app that does the same as the home app for setting chromecast up, but without checking if I'm connected to a WiFi network. (I think)
I'm guessing that you have no WiFi but you do have a hard line internet connection?
The only issue with what I'm going to suggest is that base rules may prohibit creating a WiFi access point on any of their hardline connections.
But the best solution for you is to buy a Portable Router (see posts here about using CCast in a Hotel).
It's a small box about the size of a DC transformer that plugs into the outlet and also any Network to create a small footprint WiFi access point.
I suggest looking for a model that also has Repeater mode that allows it to connect to another WiFi access point to create your own private network as opposed to a hard line.
It is probably the best way to use a CCast in places where WiFi is not available without having to play with Phone Hotspot which doesn't always work due to the fact the hotspot can't control the CCast in that mode.
The other Option that is most likely to be allowed is to add a WiFi puck to your Mobile account. Then there would be no potential compromising of the Military network (which is why they might not allow the Portable Router to be used) and you would no longer need two phones to run the CCast.
CCast definitely needs Internet so that Puck might be the safest and best way forward for you.
As for what you read...The issue is that if the Phone goes out of range it stops working.
Asphyx said:
I'm guessing that you have no WiFi but you do have a hard line internet connection?
The only issue with what I'm going to suggest is that base rules may prohibit creating a WiFi access point on any of their hardline connections.
But the best solution for you is to buy a Portable Router (see posts here about using CCast in a Hotel).
It's a small box about the size of a DC transformer that plugs into the outlet and also any Network to create a small footprint WiFi access point.
I suggest looking for a model that also has Repeater mode that allows it to connect to another WiFi access point to create your own private network as opposed to a hard line.
It is probably the best way to use a CCast in places where WiFi is not available without having to play with Phone Hotspot which doesn't always work due to the fact the hotspot can't control the CCast in that mode.
The other Option that is most likely to be allowed is to add a WiFi puck to your Mobile account. Then there would be no potential compromising of the Military network (which is why they might not allow the Portable Router to be used) and you would no longer need two phones to run the CCast.
CCast definitely needs Internet so that Puck might be the safest and best way forward for you.
As for what you read...The issue is that if the Phone goes out of range it stops working.
Click to expand...
Click to collapse
Actually, no Internet at all, just mobile data, but since I got 15 gigs it's OK for me to use it.
exeLz said:
Actually, no Internet at all, just mobile data, but since I got 15 gigs it's OK for me to use it.
Click to expand...
Click to collapse
Then I suggest getting the WiFi puck and adding it to your data account.
Asphyx said:
Then I suggest getting the WiFi puck and adding it to your data account.
Click to expand...
Click to collapse
To be honest, it is a good idea but my I was mainly wondering if I could solve it via software which is both easier obviously and also I just wanted to know if it's actually possible since I thought of it and I wanna know if I got it right
exeLz said:
To be honest, it is a good idea but my I was mainly wondering if I could solve it via software which is both easier obviously and also I just wanted to know if it's actually possible since I thought of it and I wanna know if I got it right
Click to expand...
Click to collapse
Not really...All the hacks and such that people try simply don't work well due to the fact that the Phone can't really connect to the same subnet as the Hotspot. When you go into Hotspot mode you can't also connect to that hotspot internally because WiFi is no longer available to the phone.
Asphyx said:
Not really...All the hacks and such that people try simply don't work well due to the fact that the Phone can't really connect to the same subnet as the Hotspot. When you go into Hotspot mode you can't also connect to that hotspot internally because WiFi is no longer available to the phone.
Click to expand...
Click to collapse
That's why i suggested tempering with the app so it treats being a Hotspot as if u were with WiFi on connected to one.
Basically take off the check for being connected to WiFi.
exeLz said:
That's why i suggested tempering with the app so it treats being a Hotspot as if u were with WiFi on connected to one.
Basically take off the check for being connected to WiFi.
Click to expand...
Click to collapse
The issue isn't the app...It's the fact that the WiFi in your phone can only do one thing at a time....BE an Access Point or CONNECT to an access point.
It can't connect to itself as the radio can't do both things at once.
So when you go into hotspot there is no way to get on the same subnet as the hotspot with the phone.
Because there is no network adapter available to connect to it. It is too busy being an access point.
Basically going into hotspot turns the Phone into a router. A router the phone has no way to connect to. So you either need another device to connect to that phone router or find some other router with internet.
Which is what the Cellular Puck will give you.
Asphyx said:
The issue isn't the app...It's the fact that the WiFi in your phone can only do one thing at a time....BE an Access Point or CONNECT to an access point.
It can't connect to itself as the radio can't do both things at once.
So when you go into hotspot there is no way to get on the same subnet as the hotspot with the phone.
Because there is no network adapter available to connect to it. It is too busy being an access point.
Basically going into hotspot turns the Phone into a router. A router the phone has no way to connect to. So you either need another device to connect to that phone router or find some other router with internet.
Which is what the Cellular Puck will give you.
Click to expand...
Click to collapse
Like I said, once the setup is done, being the Hotspot is just like being connected to is. The app still doesn't recognize you're connected but if you're on the web the chromecast icon does pop up when needed, all the third party apps do recognize you as being connected.
All you managed to do with Google Home (which can't be edited by anyone but Google)on the second phone is connect your CCast to the Phone Hotspot for it's Internet. There is no way to avoid that setup....HOWEVER...
As long as you don't set it up to connect to some other Hotspot there is no need to run Home again, Just turn on Hotspot and it should reconnect.
It will even remember the password,
Accidental post
Asphyx said:
All you managed to do with Google Home (which can't be edited by anyone but Google)on the second phone is connect your CCast to the Phone Hotspot for it's Internet. There is no way to avoid that setup....HOWEVER...
As long as you don't set it up to connect to some other Hotspot there is no need to run Home again, Just turn on Hotspot and it should reconnect.
It will even remember the password,
Click to expand...
Click to collapse
Yea I know, but sometimes friends take it or something and it's a pain in the ass to explain everything, and even when I do it means I gotta reconnect at my end again which is annoying just thought someone could maybe find a solution that sounded really simple for me, guess not, too bad..
Thanks anyway!
Well trying to recode Home is a dead end....Android wouldn't even let you install it!
You guys should just chip in and buy the puck.
It will even let you use Tablets and Laptops as well as simplify the CCast use.
I know this is an older post; not sure if you are still interested. I read all the replies and not sure what to make of it as far as if anyone had a working solution or not. No disrespect to anyone, but I couldn't tell for sure so I'm posting a link to my solution which does work. The two important steps are included. One is using " other wifi" in the drop down list when searching for your hotspot. The second is enabling GUEST MODE.
https://forum.xda-developers.com/android/help/how-to-cast-screen-android-phone-to-t4032653
I’m trying something similar with a Chromecast 3rd gen and iPhone 5S (iOS 12). Main issue seems to be guest mode doesn’t work at all on any apps, and pretty much every solution i’ve seen to this results in guest mode being used for the eventual casting. If you have android or iOS 13 then ymmv.
The only solution i’ve found are workarounds, the obvious being
1) don’t buy a chromecast (it’s not much of a solution but hey it’s $30).
2) use a secondary device to cast.
3) use a tethered travel router, and this can be done with only a phone and mobile data for internet, but there’s a catch:
First i’d Recommend any router by GLi.net (cheapest “mango” router is about $20) as they support iOS and android and both WiFi and usb tethering.
Also, i’ve Tried using a WiFi hotspot on the phone, and it’s the same issue - no connection to the chromecast regardless of how. However... iPhones will allow you to create a hotspot using *only* cables usb tethering, so if you set the router up to *only* accept internet via cables tether (turn off WiFi/repeater tethering), then you can have both the chromecast and iPhone connect to the routers WiFi, whilst providing net access to the router (and WiFi network) from the same iphone’s mobile data via usb. Simple howoto:
Important: Turn OFF WiFi on the phone, and turn off hotspot.
Connect phone to router via usb, accept trust settings.
Turn on personal hotspot, you’ll get a message asking whether to use WiFi or just usb (andbluetooth if it’s also turned on). Select just usb/Bluetooth.
Wait until blue connection bar shows on phone (if not, make sure routers setup properly to gain net via usb tethering).
Now, turn on WiFi on the phone, and connect to routers WiFi.
Setup chromecast as normal, selecting to connect to routers WiFi too.
Note turning hotspot off and on again whilst WiFi is running will start a hotspot on WiFi and disconnect you from router WiFi, so you’ll always have to go through process of turning WiFi off, turn hotspot on, turn WiFi on.
So you can do this with the right router and a usb connection to phone. Or maybe android and working guest mode. Otheriwse, ...fire tv anyone?