i tried to update (2.1 to 2.3 ) sony xperia x8 e15i by using flashtool..
but after some steps it turned off..n now it's not turning on...:crying::crying:
when i switch on then it shows only sony ericsson logo in white colour continuously...
Device status is showing "ADB Mode" when i check by flashtool ...
how can i start my phone..
please resolve this issue
Experts reply needed
thanks in advance
Search for a guide on how unbrick your phone. It's only a soft brick.
Repair with SEUS software
How do you did this???
To flash via flashtool you need ftf file rom and the only rom using this method is the SDE Rom witch have and the kernel inside..
So,is your bootloader unlocked?
Btw, here is a link
http://forum.xda-developers.com/showpost.php?p=35338935&postcount=2
Related
my phone cant on
i think i accidently formated the system
gt any link hw 2 recover back?
urgent
mmore info. plz so i might help
try flash stock rom using flashtool or use pc companior or seus to repair ur phone
Sent from my X8 using xda premium
gsrex said:
my phone cant on
i think i accidently formated the system
gt any link hw 2 recover back?
urgent
Click to expand...
Click to collapse
uSe SEUS/flashtool...
once i on my phone,
only appear sony ericsson for long time
after a few hours still same
u r still lucky!
use SEUS or PCC or FlashTool
u can use search button how to fix it..
my advice don't play with bootloader
it will kill your phone if u make a bit mistake
Download flashtool,
Download rom image- http://www.multiupload.com/XLV6AA41DB
Download baseband - http://forum.xda-developers.com/showthread.php?t=976538
Copy both rom image and baseband to firmwares folder of flashtool
First flash rom image and then baseband....
it's easy if u still have the SE logo
1.Download PC companion for x8
2.Dont connect your phone
3. Go support Zone
4.Go software update
5. click Repair phone
6.follow instructions ...
very simple ...
unlike me ...my phone is now dead brick ...i think theres no solution for me now ...just be careful when bootloading your phone , once you do it wrongly its dead brick have to be serviced ...
Help me please
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX (actually i already try gingercruzz, froyobread, etc) and my xperia stuck in "Sony Ericsson" after I do full wipe and format system(because i already done many install and uninstall application). T T
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program keep requesting for connecting usb cable and press back button. but the LED green is on
The Big Problem is " My Xperia won't response after the program request for connecting usb cable and press back button" that command always like that, even I connect usb cable to my phone and press back button. either in SEUS, PCC, Flashtool even in S1toll
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8...
my phone already bricked for 2 weeks, and I read many forum from XDA, Android-indonesia, kaskus, and many of bloggers but not worked for my Xperia
Help me Please...
r_win said:
Help me please
I have a Brick Xperia X8, my Xperia Stuck on "Sony Ericsson" after I turn on my device. my Xperia has been rooted for GingerDX (actually i already try gingercruzz, froyobread, etc) and my xperia stuck in "Sony Ericsson" after I do full wipe and format system(because i already done many install and uninstall application). T T
if I charge my xperia through original charger, it only stuck on "Sony Ericsson" and the LED not flame.
I have tried using SEUS, PCC and Flashtool, but my Xperia cannot response while connecting usb cable and press back button. the program keep requesting for connecting usb cable and press back button. but the LED green is on
The Big Problem is " My Xperia won't response after the program request for connecting usb cable and press back button" that command always like that, even I connect usb cable to my phone and press back button. either in SEUS, PCC, Flashtool even in S1toll
I have tried to use Reelock bootloader(S1tool), but my xperia could not response too. either I click Identity, Flash or Restore. I have tried Gordon's Gate to reset my usb port, but my computer always hang when I connected USB cable and press back button.
Please, what can I do to save my Xperia X8...
my phone already bricked for 2 weeks, and I read many forum from XDA, Android-indonesia, kaskus, and many of bloggers but not worked for my Xperia
Help me Please...
Click to expand...
Click to collapse
okay...
if you're still confuse, downgrade your phone!
its last option
downgrade into 2.1 - download this file from files crop X8 E15i 2.1.1.C.0.0._un.ftf
root your phone by flash tool..
then install xrecovery by clicking cross icon on flashtool
OR
download this file (password=cintaindonesia) and extract in your SDcard
after that copy paste three files(busybox, chargemon, xrecovery.tar) in system\bin
and you will get xrecovery
after that
unlock bootloader using flashtool OR s1tool
Flash the latest ICS kernel
backup
factory reset, wipe data, etc
Flash ROM
done!
here my Video tutorial..but I'm sorry cz I made it with Indonesian language
http://www.youtube.com/watch?v=SIIG6...&feature=g-upl
My mobile has a same problem.
Follow this link and do it..Don't panic..
http://mkasharingiscaring.blogspot.in/2011/11/guide-how-to-unbrick-xperia-x8-d.html
If i helped you please press thanks button..........
He said his x8 can't go to flash mode the flashtools can't detect his x8...
By the walking Walkman...
Opening multiple threads and asking the same question everywhere is not allowed.
Since he asked this question in the correct thread too, this one is closed
Well this is my first post here.
To be very short this is not a totally new problem. This is a combination of many problems that has made me totally helpless.
I had rooted my device using x8toolbox beta4, and installed a Gingerxperia V21 custom ROM.
After that i tried unlocking the bootloader, but flashtools continuously kept saying that my device was in MTP mode and strange enough there was no option in my phone's settings to change it.
So I went back to x8toolbox planning on installing the stock ROM back, when i saw busybox installer within.
I installed busybox 1.19.0 and then i asked x8toolbox to check the digitizer on my phone, AND THERE IT STARTED REBOOTING OVE AND OVER.
So now my phone can't connect to my pc for PCC repair or flashtools as MTP mode can't be switched off (and my phone won't turn on for the sd card to be read). And i am stuck with the Sony Ericsson Logo.
Please help me.....thanks in advance.
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Or just try Flashtool
i think your problem is flashing driver.. try to install on /flashtool/drivers/ the name of drivers is gordon gate.. but if your have a same problem after installed drivers, check your drivers on my computer/drivers.. or try for flashing on other computer..
leecorp said:
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Click to expand...
Click to collapse
Thanks for your answer..... But as I said my phone is still in MTP mode and doesn't seem to snap out of it. As i plug in my phone it turns on the green light and then starts rebooting as usual. Is it my driver 's issue? or is it just the mtp mode?? flashtool also says the same thing..:crying:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
bandarigoda123 said:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
But flashtools shows ERROR and flashing aborted and says that for 2011 line devices make sure your device is not in mtp mode....
Flashtools doesn't work that way....
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
kakho55 said:
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
Click to expand...
Click to collapse
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
livinglegend9894 said:
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
Click to expand...
Click to collapse
DONT UNLOCK!!!!!!!!!! HARD BRICK!
Sent from my E15i using xda premium
Don't try to unlock the Bootloader
If the error getting further, Re-install Windows.
It can't be, 3 weeks ago I had the same problem (MTP) .
I can't even install Apps via flashtool, so I try to connect to flashmode.
It works.
As I said try to Re-install windows.
Good Luck.
Hello everybody,
I tried to boost me girlfriends phone, its running with CM10.2 at the moment but she doesnt like it, she wants the stock rom back. My problem is i cant use flashtool for some reason it recognizes the phone but never start the flashing process. I tried older, newer versions, i installed xperia z and flashmode flashtool drivers as well(when i connect the phone in flashmode it says SEMC FLash Device), but i couldnt manage a single flash with them. I need flashtool to relock the bootloader otherwise i wont be able to reflash the stock rom via SEUS.
Any ideas would be appreciated!
Thanks in advance.
Nathan
Hiho! My friends
I have some problems wth my xperia sp c5303
Recently flashed z3 experience lp rom by vwadam to my sp
After a week i wanted back to stock 4.2
When im flashing with flashtool it shows system.sin error flashing aborted!!
Ive seen that computer recongnice it as "somc flash device "
In other times ive flashed it with ft computer device manager said "Semc flas device"
Ptessing power button phone vibrates normally show SONY logo and then off!!
When i conect to wall charger/computer it alternante both flash mode"green light" off after show SONY logo with red light gets off!! And the cicle stars again
Ive tryed repair with s1tool but it says unknow error 000001
I think s1 tool is not necesary because phone shows sony logo and power on when ButrĂ³n is pressed
I thank some sgestins please :/
1- Put the phone on charge for more than 2 hrs to make sure battery is changed.
2- Download the older version of flashtool v 0.9.18.6 from flashtool.net website and flash the ftf.
Or you can use the official Xperia companion program to repair your phone.
Sent from my Xperia SP using Tapatalk
OsGhaly said:
1- Put the phone on charge for more than 2 hrs to make sure battery is changed.
2- Download the older version of flashtool v 0.9.18.6 from flashtool.net website and flash the ftf.
Or you can use the official Xperia companion program to repair your phone.
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
SOLVED!! Flashtool error ver. 9.0.22
With 9.0.18 flashing. Was perfect :laugh: :laugh: :laugh: :laugh: