[Q] 4.4.2 - notification sound not working - Galaxy S III Mini Q&A, Help & Troubleshooting

Hello,
I installed [ROM][4.4.2] CyanogenMod 11.0 20131219 and after couple hours notification sound for sms, whatsapp, emails and etc., stop working. Only vibrating is working. Calling sound is normaly working. If I am trying choose the sound from setting-notification sound - I can not hear it when I am choosing it. But if am trying choose notification sound from for example whatsapp menu, there I can hear notification sound when I am choosing it. But generaly is still not working...
Today I installed 20131221 version and still the same problem.
Does anybody the same problem?
Galaxy S3 mini

So I will answer by self.
Again Wipe->install ROM->install GAPS --- and now is working
But I have a new question about charging X shutdown. If I will charge phone he will shutdown after hour...

Ask here http://forum.xda-developers.com/showthread.php?t=2521593 in a rom thread.

I now. But I am new here and I have no permission yet. After 10 posts I can...

I suggest you flash the 23rd, because I think the 21 and 22 had a bug

juliàcarax said:
I suggest you flash the 23rd, because I think the 21 and 22 had a bug
Click to expand...
Click to collapse
THX it helped, easy

citemsm called
So at the and it didn't help, 24th version too. I fully charged battery last night and I can see in history that battery reach 100% and after cca 15 min was phone switched off

Related

new test kernel ..

there is a new test kernel ...
see link: http://forum.xda-developers.com/showthread.php?t=788815
camro said:
there is a new test kernel ...
see link: http://forum.xda-developers.com/showthread.php?t=788815
Click to expand...
Click to collapse
Great thanks for it!
It good kernel: battery, USB and phone sound works on my Topaz with him and Neopeek CM6 build
My TD2 is faster with this kernel. Wake up from sleep is the best i've seen. Will continue to test.
This kernel along with the newest neopeek.com test build is working great! I haven't tried phone calls but I've downloaded many apps and ran them no problem. Also, battery life is AMAZING.
Texting is working good too. I'm guessing phone calls still have the "No incoming calls in deep sleep" bug and the "Push volume down to make incall sound work" bug. Once that deep sleep bug is gone i know a LOT of people will be happy here
Still not as long as windows mobile battery life but it's certainly getting there. The new battery display algorithm is great.
Edit: Topaz HTC AT&T Pure with stock ROM installed.
Edit 2: Phone freezes after about 4 seconds in to incoming calls, happened twice i had to press reset with stylus.
Joshwaa808 said:
Edit 2: Phone freezes after about 4 seconds in to incoming calls, happened twice i had to press reset with stylus.
Click to expand...
Click to collapse
I had the same problem on my Topaz but it would get to 8 sec before rebooting. If you make a phone call out when the device boots into Android then you'll get incoming calls with no problem. The downside is you need to do it every boot.

[Q] Solution to Temasek's CM7 Kang problems

Hi, I'm only posting here since I can't search and reply to temasek's thread due to me being a noob haha Anyway, thanks to Temasek for his work and I really like it a lot, but I have 2 major issues that I've experienced so far.
1) I am unable to delete my 10k+ messages in my phone. Everytime I try, the application hangs and I have to force close it, be it stock or go sms.
2) Computers are unable to read my phone as a USB mass storage. Since it is a mass storage, I do need need to install any drivers right? (ie. flash drives)
Hello!
1. ) No idea why you can't delete your SMS - sorry - I got like 10+ SMS (meaning something between 10-20) in my folders. I usually use Email or WhatsAPP since SMS is expensive with my mobile plan...
2.) What OS are you using on the PC side? If it is some WIndows - Did you install the newest drivers for the phone? - they should be available on XDA or from LG directly.
10K plus is an enormous amount of messages. If you want to delete them, it will take time and the phone is going to stop responding for a while.
Try to delete /data/data/com.android.providers.telephony/databases/mmssms.db*
I have no idea if that screws things up, so do a nandroid backup first
Erm ok maybe I have to clarify further. The 2 above problems only surfaced when I switched over to CM7. When I was on stock firmware, I had absolutely no problem with the above 2.
I know it takes time to delete but when I pressed 'delete', the app freezes and force closes. Not even 1 had been deleted! (again I tried with stock and had absolutely no problem, it started right away showing me the status of the process).
2) You need to install the drivers in order to access the SD card(s).
download LG device drivers here
alarm notification issues
Hi I'm writing here because I have less than 10 post + it is a problem I'm facing with the last temasek's KANG #80.
When I call someone or when someone calls me, for each active clock alarm appears a notification that informs me : "Alarm silenced after xxx minutes". xxx is the time between the last alarm activation and the call that "fired" the notification.
It is not a serious problem but it's quite annoying.
Before #80 flash I've never faced this problem.
Any thought ?
Hello, i´m having a problem with Kangs RC1-81 in my lgo2x
I´m from brazil and here we have some "special characters" (like é ó ã and etc), but when i send a SMS with some of these characters (or a very long SMS) the other person receive with a lots of "?" in the message
this pic is from my galaxy´s friend (with stock rom). i´ve sended this SMS to him and he received this "thing", but i´ve tried with others 4 friends and all received this kind of SMS.
anyone know how to fix this?
pandorious said:
Hi I'm writing here because I have less than 10 post + it is a problem I'm facing with the last temasek's KANG #80.
When I call someone or when someone calls me, for each active clock alarm appears a notification that informs me : "Alarm silenced after xxx minutes". xxx is the time between the last alarm activation and the call that "fired" the notification.
It is not a serious problem but it's quite annoying.
Before #80 flash I've never faced this problem.
Any thought ?
Click to expand...
Click to collapse
I am also having this issue as well...
dookie23 said:
I am also having this issue as well...
Click to expand...
Click to collapse
Wasn't that a pdroid bug? Should've been fixed #84 onwards.
Yeah, thanks guys, it was fixed in the latest build.
because I didn't find any solution and cause I did thought that had to do with pdroid I flashed the non-pdroid version and everythings works ok...

[Q&A] [ROM][AOSP][Nightly/Release] CarbonRom KitKat [i9300/i9305]

Q&A for [ROM][AOSP][Nightly/Release] CarbonRom KitKat [i9300/i9305]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
sound at the end of call
hello i need some help please about this roms , when i use headphone for my call , there is a noise at the end of the call , very unbearable , but i don t find where i can remove this sound , is it possible with this rom ? and if it is ,can you show me the way
thanks for responses
Hello. Please help me !
How to disable effect old tv when turn off screen ?
---------- Post added at 07:07 PM ---------- Previous post was at 07:02 PM ----------
Hello. Please help me !
How to disable effect old tv when turn off screen ??
Sound end of call
Hello , my device is a SGII 19305 and my rom carbon 4.4.4 , i need help , there is a very unpleasant sound at the end of the call , and its muche more unbeareable with the headphone , please let me know how remove this sound of end call
thanks for answer
Feedly (embedded videos force closing)
I've searched around but I haven't found what could be causing this problem? Video playback works fine in stock rom but none of the Cyanogenmod based ones aren't working for me.
How to reproduce
Start feedly, find a rss post that has a video embedded > try to play the video.
Results
Video sometimes will show up, usually it only show's a black box but the audio can be heard. ( change the phone orientation and video either shows up or the rom boots to startup logo.)
I haven't been that active lately, could this be gpu driver related? If someone could shed some light into this I'd be thankful.
Issue with alarm setting
Hey guys.
Loving the rom and have had no real issues and a normal everyday user but the last 3 nightlies for the Galaxy S3 have had this issue for me when trying to set and turn off the alarm.
When you go to the alarm screen and press to turn on the alarm, there is no response for a second or two, then the on/off button will start flicking from side to side (4-6 times a second) turning the alarm on and off again in quick succession. On the status bar on the top of the screen you can see the alarm set icon flashing on and off rapidly as well. If you hit the back button at the right time, the alarm will stay on.
This morning I dirty flashed the latest release (16/10) and found the problem to be still there. Also this morning i went to turn the alarms off (after testing the button) and it would not turn off. I was sitting there for like 10 mins trying to make it turn off. Then i had the idea of deleting the alarm (with the trash icon on the alarm setting) which after a lot of tries finally deleted the alarm. My elation was short lived when i noticed in the status bar it was saying i still had an alarm set for tomorrow. Looking in the alarm section, there is not even any alarms in there. I have rebooted the phone, set an alarm and all with no luck getting rid of this alarm that is "set" but not showing.
Anyone else having similar issues?
---------- Post added at 12:31 AM ---------- Previous post was at 12:24 AM ----------
I have the same issue with videos in web pages, you can start the video and it will play but only the sound and leave the box black. even putting in full screen leaves the screen black. If you change the orientation you get the picture for a fraction of a second before it goes black again.
Metalfoxy said:
I've searched around but I haven't found what could be causing this problem? Video playback works fine in stock rom but none of the Cyanogenmod based ones aren't working for me.
How to reproduce
Start feedly, find a rss post that has a video embedded > try to play the video.
Results
Video sometimes will show up, usually it only show's a black box but the audio can be heard. ( change the phone orientation and video either shows up or the rom boots to startup logo.)
I haven't been that active lately, could this be gpu driver related? If someone could shed some light into this I'd be thankful.
Click to expand...
Click to collapse
end call sound
Hello i v instal this carbon romm 4.4.4 on my SG 3 19305 DEVICE , i need help for find how remove the noise at the end of call, maybe asound in the folder that i can desactivate , cause i don t find any parameter for the call thanks for answer
---------- Post added at 10:21 AM ---------- Previous post was at 09:23 AM ----------
sound at the end of call
hello i need some help please about this roms , when i use headphone for my call , there is a noise at the end of the call , very unbearable , but i don t find where i can remove this sound , is it possible with this rom ? and if it is ,can you show me the way
thanks for responses
Does anyone know how to enable an exit button in the menu of the stock browser?
sound end of call
Hello , my device is a SGII 19305 and my rom carbon 4.4.4 , i need help , there is a very unpleasant sound at the end of the call , and its muche more unbeareable with the headphone , please let me know how remove this sound of end call
thanks for answer
Sound end of call
hello i need some help please about this roms , when i use headphone for my call , there is a noise at the end of the call , very unbearable , but i don t find where i can remove this sound , is it possible with this rom ? and if it is ,can you show me the way
thanks for responses i ve instal last nightly but always the same sound and no control anywhere
speed dial
Hello the speed dial doesn t work , i cant affect 3 numbers at the first touch, but the other numbers doesn t work , and if anyone have solutions for the remove the sound end off call thanks
greasy71 said:
Hello the speed dial doesn t work , i cant affect 3 numbers at the first touch, but the other numbers doesn t work , and if anyone have solutions for the remove the sound end off call thanks
Click to expand...
Click to collapse
Hi, I've noticed no-one has offered an answer, unfortunately. That usually means no-one has a clue yet as to what could cause your particular problem(s). That goes for me too.
It happens. Apparently you have come across an unusual outcome of flashing. Bad flashes and such do occur, when there is little point in fully analyzing what has gone wrong. (Unless you have the time.)
So perhaps the most practical idea would be to really start again from scratch: first backup what needs backing up, make sure you get a good recovery installed like TWRP or Philz Recovery, then do a factory reset, wipe cache, wipe Dalvik, and then flash Carbon Rom.
BTW, my own recent experience has only been really fine with versions of August 7 and October 12, so those I can personally endorse. Furthermore, I prefer dirty flashing on top of versions that function pretty well already. Very often it goes well. Only sometimes I need my (nandroid and other) backups, before trying again
Good luck.
greasy71 said:
Hello the speed dial doesn t work , i cant affect 3 numbers at the first touch, but the other numbers doesn t work , and if anyone have solutions for the remove the sound end off call thanks
Click to expand...
Click to collapse
For speed dial question, clear data of ur dialer app.
_____________
Sent from my "GT-I9300/1+1" powered by Temasek/Carbon Rom & Boeffla/ak Kernel
Fueled by 7000mAh ZeroLemon Battery
sound end of call
nicesoni_ash said:
For speed dial question, clear data of ur dialer app.
_____________
Sent from my "GT-I9300/1+1" powered by Temasek/Carbon Rom & Boeffla/ak Kernel
Fueled by 7000mAh ZeroLemon Battery
Click to expand...
Click to collapse
First thanks for the on who response for speed dial , i try a solution to force the numbers , and it works , anyway i have always my problem for the sound at the end of call its very noisy ,cause i work all the day with my device and the sound is boring , i thing there is a file for the sound , but i don t know the name of it , i ve searchinf in system/sound/ui but i don t find specific sound for the end of call
i some one can help me it will be fine thanks
ayoubij said:
Which version dont just say last. 23 or 19 ?
Click to expand...
Click to collapse
I flashed fistly 19 and after 23. On both versions I have observed the same behavior wih wifi, the credentials are lost everytime I disconnect WIFI for more than couple of seconds and of course every time I restart my phone.
Sound again
Hello , many problem about the sound with this roms , if you can help me please , the level of the microphone , when you call even full increase is too poor , no mather with music or video , only with call have you a solution, and always my problem of this sound at the end of call is anyone knows how remove it , please let me know
thanks for answer
I had the same problem and I managed to repair it by copying /data/misc/wifi/wpa_supplicant.conf from the last version where WIFI credidentials were working for me and overwritting it in the last version. For me that help.
---------- Post added at 11:14 AM ---------- Previous post was at 11:08 AM ----------
I had the same problem and I managed to repair it by copying /data/misc/wifi/wpa_supplicant.conf from the last version where WIFI credidentials were working for me and overwritting it in the last version. For me that helped.
When can we expect carbonrom lollipop? Thank you
Lollipop isn't guaranteed on s3 so could be a while
I would like to give CarbonRom a try on my i9305, however, I'm curious regarding the number of bugs to expect.
Unfortunately, I can't find a list with "what works/what doesn't work", but from reading the thread I already learned that in one of the nightlies, sending a text causes the network connection to drop. This is something I'd like to avoid.
Would anyone be so kind to share their experiences, and tell me which nightly has the least amount of bugs (and what bugs)?
Kind regards,
Borovskaya

Need Help with in-call volume problem

hello i dont know if i am in a right place but my note 8 is has an issued with call-volume, even after i hung up my phone tje volume still stuck 5 minutes or more but not one time almost everytime like that not to mention i also as A5 2017 same thing problem after update to 7.0 or 7.1 please watch the video for my problem youtu.be/m58FYIFe-HY
thank you!
I still have this problem. Wiping the cache partition does nothing, and I have never used a bluetooth headset with this phone. Disabling WiFi calls doesn't make any difference - I am, no matter what I do, unable to use the left 15% of the volume slider area.
Has anyone stumbled over a working fix? Using latest stock ROM...

Vibration dont work all time?

Hi i got a problem since today.
My Vibration dont work all time. Sometimes i get a Message and the phone Vibrate and then 1-2 Hours later there is no Vibration at all for like 1 hour or more.
My device run on XIAOMI Mi8 GLOBAL STABLE MIUI 10.3.5.0
motte49 said:
Hi i got a problem since today.
My Vibration dont work all time. Sometimes i get a Message and the phone Vibrate and then 1-2 Hours later there is no Vibration at all for like 1 hour or more.
My device run on XIAOMI Mi8 GLOBAL STABLE MIUI 10.3.5.0
Click to expand...
Click to collapse
You didn't say which message app you are using, it sounds like a permissions issue, or a battery manager settings issue. Make sure that the app is not battery optimized.
By the way, these notification type issues are fully resolved in Miui 11, the first generation of Miui 11 stable for global devices, gets released tomorrow: October 16
its in all apps.
And you now when you use the fingerprint with the wrong finger its Vibrate short this dosent work like the other thinks but its really only sometimes.
tsongming said:
You didn't say which message app you are using, it sounds like a permissions issue, or a battery manager settings issue. Make sure that the app is not battery optimized.
By the way, these notification type issues are fully resolved in Miui 11, the first generation of Miui 11 stable for global devices, gets released tomorrow: October 16
Click to expand...
Click to collapse
the half day works Vibration just fine and now no Vibration after all....... dont now why this happen
motte49 said:
the half day works Vibration just fine and now no Vibration after all....... dont now why this happen
Click to expand...
Click to collapse
I am not having that issue and as far as I know no one else is either. Have you tried a clean install? Did you check and make sure that Do not Disturb mode is not being enabled?
A new update be out tomorrow. So maybe just wait until then. ( Edit, I thought I was on a different thread when I wrote that)
Most likely this issue is caused by a battery saver mode such do not disturb. If that is not what is causing the issue try a clean install.
I faced this issue today , i figured out why it happened ..
Its cuz i turned the ultra battery saver on and after turning off i faced the issue
So i repeated the same steps and its back again

Categories

Resources