Related
Please suggest a untethered rooting Method. Details are attached
Sent from my GT-I9100 using Tapatalk 2
drraptor said:
Please suggest a untethered rooting Method. Details are attached
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
You can try some kernel which works with froyo rom.. you want an untethered method so it needs to be a flashable zip or you can use kernel flasher app for galaxy s and use .tar kernel file to flash the custom kernel.. this will root your device.
ishangoyal said:
You can try some kernel which works with froyo rom.. you want an untethered method so it needs to be a flashable zip or you can use kernel flasher app for galaxy s and use .tar kernel file to flash the custom kernel.. this will root your device.
Click to expand...
Click to collapse
Actually I want install CM 10.1, so which from where I can find a kernel for both rooting and flashing CM10.1
http://www.dkszone.net/root-galaxy-s-samsung-android-2-2-froyo-samsung-galaxy-tab-root is this helpful ?
drraptor said:
Actually I want install CM 10.1, so which from where I can find a kernel for both rooting and flashing CM10.1
http://www.dkszone.net/root-galaxy-s-samsung-android-2-2-froyo-samsung-galaxy-tab-root is this helpful ?
Click to expand...
Click to collapse
This is a very old method.. What I'll suggest is going to darkyrom.com and get the 10.2 Resurrection Odin version.. Flash that and you'll have a rooted GB ROM.. Then you can flash CM 10.1 from recovery
Sent from my GT-I9000 using Tapatalk 2
ishangoyal said:
This is a very old method.. What I'll suggest is going to darkyrom.com and get the 10.2 Resurrection Odin version.. Flash that and you'll have a rooted GB ROM.. Then you can flash CM 10.1 from recovery
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Mobile Odin require root
Sent from my GT-I9100 using Tapatalk 2
drraptor said:
Mobile Odin require root
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I forgot that you want an untethered method.. I was referring to flashing 10.2 resurrection using odin from PC using USB cable..
ishangoyal said:
I forgot that you want an untethered method.. I was referring to flashing 10.2 resurrection using odin from PC using USB cable..
Click to expand...
Click to collapse
With Odin, I could have used the official stock gingerbread too
Sent from my GT-I9100 using Tapatalk 2
drraptor said:
With Odin, I could have used the official stock gingerbread too
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
well then you can try using the z4root method too... I remember when I bought my SGS way back in 2010, I used that method only to root my froyo based SGS..
ishangoyal said:
well then you can try using the z4root method too... I remember when I bought my SGS way back in 2010, I used that method only to root my froyo based SGS..
Click to expand...
Click to collapse
How can I flash CWM recovery ? Z4 root will only root it
Sent from my GT-I9100 using Tapatalk 2
drraptor said:
How can I flash CWM recovery ? Z4 root will only root it
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
once rooted you can use rom manager to flash CWM recovery.. it'll download and flash it.. no need to use odin .. and also once you are rooted you can use mobile odin too (though its paid I think.. rom manager free version comes which will do the work).
ishangoyal said:
once rooted you can use rom manager to flash CWM recovery.. it'll download and flash it.. no need to use odin .. and also once you are rooted you can use mobile odin too (though its paid I think.. rom manager free version comes which will do the work).
Click to expand...
Click to collapse
Mobile Odin pro is for $5. Free version doesn't preserve root.
I will hopefully try your suggestion.
Sent from my GT-I9100 using Tapatalk 2
Can someone create a flashable zip of stock kernel of jellybean rom for 9070P?
I want to try kernels for 9070 but i'm afraid of some bugs so i want to return easlily to stock kernel...
FollonSaxBass said:
Can someone create a flashable zip of stock kernel of jellybean rom for 9070P?
I want to try kernels for 9070 but i'm afraid of some bugs so i want to return easlily to stock kernel...
Click to expand...
Click to collapse
For returning to stock kernel u will have to flash the firmware using odin
Sent from my GT-I9070 using xda app-developers app
Chirag_Galani said:
For returning to stock kernel u will have to flash the firmware using odin
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
He can use just kernel, but we do not have much P users that can provide him that. Use your firmware, remove md5 extension at the end of filename. Open it with winrar or 7-zip and remove everything except kernels. And flash it with Odin.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
He can use just kernel, but we do not have much P users that can provide him that. Use your firmware, remove md5 extension at the end of filename. Open it with winrar or 7-zip and remove everything except kernels. And flash it with Odin.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Ok thank you shut down but i haven't always the possibility to flash with Odin so i decided to do a nandroid backup with temporary Cwm ready to be restored Thanks for the info
XXLPD stock kernel
Here is the Odin flashable XXLPD stock kernel.
Use only i9070P.
Download this: deleted
Run Odin as administrator. Add the xxlpd_kernel.tar.md5 files in PDA section.
Reboot the phone in download mode and flash the file.
So that the original kernel will be on your phone.
Agadoo said:
Here is the Odin flashable XXLPD stock kernel.
Use only i9070P.
Download this: link
Run Odin as administrator. Add the xxlpd_kernel.tar.md5 files in PDA section.
Reboot the phone in download mode and flash the file.
So that the original kernel will be on your phone.
Click to expand...
Click to collapse
it says INVALID MD5 after start flash...
FollonSaxBass said:
it says INVALID MD5 after start flash...
Click to expand...
Click to collapse
Fixed Odin flashable XXLPD stock kernel: [link]
Can I flash twrp recovery using odin without root?
Sent from my GT-I9070 using xda premium
Which android version are you on? For JB,there is only in CoCore-E kernel and you can flash by using Universal Kernel Flasher or via CWM.
Answering the questions and helping you is my favourite.
razavakil7995 said:
can i flash twrp recovery using odin without root?
Sent from my gt-i9070 using xda premium
Click to expand...
Click to collapse
no you cant
phyowaiummg said:
Which android version are you on? For JB,there is only in CoCore-E kernel and you can flash by using Universal Kernel Flasher or via CWM.
Answering the questions and helping you is my favourite.
Click to expand...
Click to collapse
I've heard it's not compatible in jelly bean. I'm currently on gingerbread, but if I flash Jelly bean, is there a risk of bricking or will the recovery be as it is??
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
I've heard it's not compatible in jelly bean. I'm currently on gingerbread, but if I flash Jelly bean, is there a risk of bricking or will the recovery be as it is??
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Who said that TWRP is not compatible with Jellybean? And no there is no risk of bricking your phone if you flash or update to Jellybean (but don't flash the Chinese firmware - I've heard that some people bricked their phone by doing that)... Just be sure that the firmware you will be flashing is the "right" one... I suppose that you are running the Indian Gingerbread firmware - so you can officially update to DULP8 (but backup all you data, apps, etc . first)... And yes, root it and install CoCore E 6.2 or 6.8 kernel - it has TWRP 2.5 with it...
Sami Kabir said:
Who said that TWRP is not compatible with Jellybean? And no there is no risk of bricking your phone if you flash or update to Jellybean (but don't flash the Chinese firmware - I've heard that some people bricked their phone by doing that)... Just be sure that the firmware you will be flashing is the "right" one... I suppose that you are running the Indian Gingerbread firmware - so you can officially update to DULP8 (but backup all you data, apps, etc . first)... And yes, root it and install CoCore E 6.2 or 6.8 kernel - it has TWRP 2.5 with it...
Click to expand...
Click to collapse
Ok but it is written that cocore kernel 6.8-or-something version is only compatible with jb. And I meant that flasing twrp when on jb is not supported. It was written on the thread. And by the way I am on JPLK2 firmware so is it safe to flash that kernel over twrp?.. I'm relatively newb to kernels but not custom roms, so it may seem like a noob question... my apologies
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
Ok but it is written that cocore kernel 6.8-or-something version is only compatible with jb. And I meant that flasing twrp when on jb is not supported. It was written on the thread. And by the way I am on JPLK2 firmware so is it safe to flash that kernel over twrp?.. I'm relatively newb to kernels but not custom roms, so it may seem like a noob question... my apologies
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Well if you are on gingerbread you need to flash the diego's twrp. If you update to jelly bean you have to flash cocore or thunderzap with twrp
Sent from my GT-I9070 using Tapatalk 4 Beta
KINGbabasula said:
Well if you are on gingerbread you need to flash the diego's twrp. If you update to jelly bean you have to flash cocore or thunderzap with twrp
Sent from my GT-I9070 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ok thanks. And by the way if I flash a custom rom which is jb based over twrp, will I lose the recovery
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
Ok thanks. And by the way if I flash a custom rom which is jb based over twrp, will I lose the recovery
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
No but you can flash just cm based rom on gb
Sent from my GT-I9070 using Tapatalk 4 Beta
KINGbabasula said:
No but you can flash just cm based rom on gb
Sent from my GT-I9070 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I want to flash galaxperia custom rom. Will I be able to flash it over twrp. I currently have stock gingerbread unrooted and twrp recovery....
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
I want to flash galaxperia custom rom. Will I be able to flash it over twrp. I currently have stock gingerbread unrooted and twrp recovery....
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
No. Galaxperia is jb stock based rom. You need to be on jellybean first to flash that. Once you're on jb, you can flash with either twrp/cwm. If you flash that while you're on gb, you're gonna stuck at bootscreen.
arffrhn said:
No. Galaxperia is jb stock based rom. You need to be on jellybean first to flash that. Once you're on jb, you can flash with either twrp/cwm. If you flash that while you're on gb, you're gonna stuck at bootscreen.
Click to expand...
Click to collapse
Ok. And one more question. I have twrp recovery and unrooted gingerbread as you know, so if I flash stock jb through odin, will I lose twrp or will my phone be bricked??
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
Ok. And one more question. I have twrp recovery and unrooted gingerbread as you know, so if I flash stock jb through odin, will I lose twrp or will my phone be bricked??
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
You need to stop worrying about "bricking your phone"... as long as you know what you are doing, nothing bad should happen to your phone... and Yes you will lose TWRP... but after updating to JB you can easily root it and install CoCore E kernel with TWRP.....
RazaVakil7995 said:
Ok. And one more question. I have twrp recovery and unrooted gingerbread as you know, so if I flash stock jb through odin, will I lose twrp or will my phone be bricked??
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Custom recovery (TWRP in your case) is on the same partition as kernel is. By flashing stock firmware kernel partition is getting wiped and new kernel with stock recovery will be instaled. First try to understand what is happening when you do something, and you will not have anything to worry about.
Againg what is already said - you can't install JB custom ROM on GB, and you can't install GB custom ROM on JB. Flashing firmware with Odin will not brick your phone, but only if you use firmware for your phone. If you have I9070P, I9070 firmware will brick it. And otherwise, if you have I9070, I9070P will brick it. Hard brick.
If you want TWRP you have to install kernel with TWRP embended in side of it. Rooting will not harm your phone, it just insert SU file that enable having root permissions.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
Custom recovery (TWRP in your case) is on the same partition as kernel is. By flashing stock firmware kernel partigion is getting wiped and new kernel with stock recovery will be instaled. First try to understand what is happening when you do something, and you will not have anything to worry about.
Againg what is already said - you can't install JB custom ROM on GB, and you can't install GB custom ROM on JB. Flashing firmware with Odin will not brick your phone, but only if you use firmware for your phone. If you have I9070P, I9070 firmware will brick it. And otherwise, if you have I9070, I9070P will brick it. Hard brick.
If you want TWRP you have to install kernel with TWRP embended in side of it. Rooting will not harm your phone, it just insert SU file that enable having root permissions.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
All right. I was doubtful because in my Micromax canvas 2, all I needed to do was to wipe /system,/data,cache partition and dalvik cache and I could flash just about any custom rom, so I was a little confused on this one. Thanks
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
I want to flash galaxperia custom rom. Will I be able to flash it over twrp. I currently have stock gingerbread unrooted and twrp recovery....
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
For galaxperia you have to update to jelly bean
Title says all,I need to change my custem boot.img to stock boot.img and if I replaced it anything wrong would happen??!!!
Sent from my GT-B5512 Using Carbon Rom
acermedo said:
Title says all,I need to change my custem boot.img to stock boot.img and if I replaced it anything wrong would happen??!!!
Sent from my GT-B5512 Using Carbon Rom
Click to expand...
Click to collapse
Boot.img is kernel... You can flash it using Odin or via CWM using kernel flasher zip....
Sent from my GT-S6102 using Tapatalk 2
raw99 said:
Boot.img is kernel... You can flash it using Odin or via CWM using kernel flasher zip....
Sent from my GT-S6102 using Tapatalk 2
Click to expand...
Click to collapse
Thanks..:thumbup::thumbup:
Sent from my GT-B5512 Using Carbon Rom
Can I flash the boot.img file present in the Nandroid backup folder? I made a Nandroid Backup of my stock ROM & the folder also had a boot.img file in it.....so,if I want to get back to the stock kernel,will that boot.img file restore it?
raw99 said:
Boot.img is kernel... You can flash it using Odin or via CWM using kernel flasher zip....
Sent from my GT-S6102 using Tapatalk 2
Click to expand...
Click to collapse
yes,you can flash it .it will restore your stock kernel.
...............HIT THANKS IF I HELPED...............
Sent from my GT-B5512 Using Carbon Rom
Can someone give me a link to download stock kernel for my s advance gt I9070.I searched I alot but dint find anything useful.I am on stock rom DDULP8 firmware. I am currently using cocore-e-2.8
Sent from my GT-I9070 using xda app-developers app
Sachinist said:
Can someone give me a link to download stock kernel for my s advance gt I9070.I searched I alot but dint find anything useful.I am on stock rom DDULP8 firmware. I am currently using cocore-e-2.8
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Download your firmware, remove md5 extension, open it with WinRAR or 7-zip and remove all except kernel.bin.md5 and kernel2.bin.md5. You have Odin flashable stock kernel now.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Download your firmware, remove md5 extension, open it with WinRAR or 7-zip and remove all except kernel.bin.md5 and kernel2.bin.md5. You have Odin flashable stock kernel now.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Can I flash it using universal flash tool?
Sent from my GT-I9070 using xda app-developers app
Sachinist said:
Can I flash it using universal flash tool?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I think you can (I am not 100% sure because I never tried it, but I do not see why you can't).
shut_down said:
I think you can (I am not 100% sure because I never tried it, but I do not see why you can't).
Click to expand...
Click to collapse
Can you please give me the link for only stock kernel if u have cause I have a poor net speed cant download such big stock rom plss
Sent from my GT-I9070 using xda app-developers app
Sachinist said:
Can you please give me the link for only stock kernel if u have cause I have a poor net speed cant download such big stock rom plss
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I attached one from XXLQB, I have that FW on my PC. You will need to unzip it.
P.S. People from general threads do not know specific devices kernels. I saw you question here: http://forum.xda-developers.com/showthread.php?p=48476107#post48476107
I suggest you to use CoCore-E 8.2. And install No Frill CPU app from play store, then change Governor to PegasusQ and Sceduler to SIO. You will notice difference then.
Then I suggest you to debloat your ROM, search for debloating. Remove not used system apps. Read here: http://forum.xda-developers.com/showthread.php?t=2200954
shut_down said:
I attached one from XXLQB, I have that FW on my PC. You will need to unzip it.
P.S. People from general threads do not know specific devices kernels. I saw you question here: http://forum.xda-developers.com/showthread.php?p=48476107#post48476107
I suggest you to use CoCore-E 8.2. And install No Frill CPU app from play store, then change Governor to PegasusQ and Sceduler to SIO. You will notice difference then.
Then I suggest you to debloat your ROM, search for debloating. Remove not used system apps. Read here: http://forum.xda-developers.com/showthread.php?t=2200954
Click to expand...
Click to collapse
I am on DDULP8 will this work??
Sent from my GT-I9070 using xda app-developers app
shut_down said:
I attached one from XXLQB, I have that FW on my PC. You will need to unzip it.
P.S. People from general threads do not know specific devices kernels. I saw you question here: http://forum.xda-developers.com/showthread.php?p=48476107#post48476107
I suggest you to use CoCore-E 8.2. And install No Frill CPU app from play store, then change Governor to PegasusQ and Sceduler to SIO. You will notice difference then.
Then I suggest you to debloat your ROM, search for debloating. Remove not used system apps. Read here: http://forum.xda-developers.com/showthread.php?t=2200954
Click to expand...
Click to collapse
I want stock kernel because I cant root cocore-e-2.8 using shaan's method which I used earlier but now when I flash the root.zip file some error pops up tmp\sideload (bad file number) stuff
Sent from my GT-I9070 using xda app-developers app
Sachinist said:
I want stock kernel because I cant root cocore-e-2.8 using shaan's method which I used earlier but now when I flash the root.zip file some error pops up tmp\sideload (bad file number) stuff
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Do not use sideload, use install from sd. And how did you unroot? If you have cocore, that means you had root to install it.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Do not use sideload, use install from sd. And how did you unroot? If you have cocore, that means you had root to install it.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I unrooted from the su app undr the settings tab which said permanent unroot and then I went to follow the same procedure which I had done earlier it gives that error and yes I am using install from sd card.is this because of cocore?
Sent from my GT-I9070 using xda app-developers app
shut_down said:
Do not use sideload, use install from sd. And how did you unroot? If you have cocore, that means you had root to install it.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Please rply I want my phone rooted again
Sent from my GT-I9070 using xda app-developers app
Sachinist said:
Please rply I want my phone rooted again
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Try with this one in attachment. I can't remember from where I got it, but Omni ROM is rooting with this one.
shut_down said:
Try with this one in attachment. I can't remember from where I got it, but Omni ROM is rooting with this one.
Click to expand...
Click to collapse
No luck I get the same error
E:can't mkdir /tmp/sideload. (bad file number)"
I am using stock recovery and stock rom
Sent from my GT-I9070 using xda app-developers app
Sachinist said:
No luck I get the same error
E:can't mkdir /tmp/sideload. (bad file number)"
I am using stock recovery and stock rom
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Wait, explaind what are you doing. First you said you are on CoCore with CMW, now you are telling that you are on stock recovery...
I have no idea why is that happening, the first zip from Shaaan should work fine with stock kernel/recovery.
shut_down said:
Wait, explaind what are you doing. First you said you are on CoCore with CMW, now you are telling that you are on stock recovery...
I have no idea why is that happening, the first zip from Shaaan should work fine with stock kernel/recovery.
Click to expand...
Click to collapse
No I am on cocore with stock recovery and the shaans zip file workd fine when I was on stock kernel but now aftr flashing cocore and I rooted aftr flashing cocore but I want to root again but whenever I flash the zip file from stock recovery I get that error
Sent from my GT-I9070 using xda app-developers app
Sachinist said:
No I am on cocore with stock recovery and the shaans zip file workd fine when I was on stock kernel but now aftr flashing cocore and I rooted aftr flashing cocore but I want to root again but whenever I flash the zip file from stock recovery I get that error
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
1. You can't be on stock recovery and on CoCore. With CoCore you only can have CWM or TWRP.
2. Why did you use old CoCore 2.8? I think there was a problem with it, and installing some zips. Use latest 8.2.
Now to avoid all those problems - flash stock JB again and do whole process again. I do not know how to do it now, maybe to use temp CWM and try from there... Search for link on our section. But again, much less painfull proces would be to go back to stock completly, root, install CoCore E-8.2.
Why did you complicated so much?
Sachinist said:
No I am on cocore with stock recovery and the shaans zip file workd fine when I was on stock kernel but now aftr flashing cocore and I rooted aftr flashing cocore but I want to root again but whenever I flash the zip file from stock recovery I get that error
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
So I shuld flash stock from odin ryt?
Sent from my GT-I9070 using xda app-developers app
Sachinist said:
So I shuld flash stock from odin ryt?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Yes, that is what I am telling you from begining.
shut_down said:
Yes, that is what I am telling you from begining.
Click to expand...
Click to collapse
Yipppieeee
I m rooted again thnx mate
Sent from my GT-I9070 using Tapatalk
shut_down said:
I think you can (I am not 100% sure because I never tried it, but I do not see why you can't).
Click to expand...
Click to collapse
you can flash stock kernel with universal kernel flasher
just you need kernel.bin and no need kernel2.bin
i flashed only kernel.bin and only it contains both boot and recovery files i dont know why kernel2.bin is included in stock rom
you have any idea why it is included?