Related
I am looking for a way to root my Samsung Galaxy S Advance l9070 XXLK2 phone.
I am using Odin.
Anyone know about a safe root?
Norwack said:
I am looking for a way to root my Samsung Galaxy S Advance l9070 XXLK2 phone.
I am using Odin.
Anyone know about a safe root?
Click to expand...
Click to collapse
It's better that you upgrade to jellybean and then root. Here is the guide: http://forum.xda-developers.com/showthread.php?t=2198341
I am also running 2.3.6 Gingearbread XXLK2 COA Romania region and looking to root. I tried the stock JB firmware from russia with root and CoCore and it's still having lag. My best option is the gingearbread for my country.
Now, my question is how can i root it?
I searched every link in xda and google to find a way for my specific firmware & country but with no results....
I found a thread in xda http://forum.xda-developers.com/showthread.php?t=1985199 where diego can pre-root the firmwares and post it there but i cannot post a request cuz i'm bigginer on the forum.
Can anyone help me?
Ciupy01 said:
I am also running 2.3.6 Gingearbread XXLK2 COA Romania region and looking to root. I tried the stock JB firmware from russia with root and CoCore and it's still having lag. My best option is the gingearbread for my country.
Now, my question is how can i root it?
I searched every link in xda and google to find a way for my specific firmware & country but with no results....
I found a thread in xda http://forum.xda-developers.com/showthread.php?t=1985199 where diego can pre-root the firmwares and post it there but i cannot post a request cuz i'm bigginer on the forum.
Can anyone help me?
Click to expand...
Click to collapse
Look for Qzem method, have all explained there. Just you need to repack kernel. But I explained couple times there how to avoid it. After rooting just use Triangle away to reset binary counter.
Послато са GT-I9070 користећи Тапаток 2
Thank you very much for the fast reply. I will go to find it and post here if any results .
Edit: Ok. I tried to to repack my kernel with Cygwin and got an error :command not found.
Could it be a faulty instalation of Cgwin?
Hello. I'm from Romania too, and running JB (Russian LQ4 fw), with CoCore, debloated, and working like a charm. No point to use GB to me, or to install another ROM at this moment. Prehaps a stable CM or MIUI.
So, my advice will be: install JB, root, debloat with Titanium Backup, run Greenify and flash another kernel. No more lag
If you have questions send me a PM.
Good luck!
Sent from my GT-I9070 using xda app-developers app
Sunt total de acord cu tine, highmage.
I'm tottaly agree with you, highmage. More stable is LQB from Serbia, rooted and debloated with custom kernel like CoCore 6.2.
Mine russian fw is working great, and is too much trouble to install another fw, root again, install applications, and all the rest
Sent from my GT-I9070 using xda app-developers app
I tried the jellybean with and without root, with and without cocore, serbia and russia fw and it was allways laggy. The ram memory was allways full, at about 500 or so being occupied. Some apps like Fx guru didn't even start becouse of lag... The GB fw is more practical and stable in my opinion. But to root it it's kinda complicated, on JB it was more simple.
Sent from my GT-I9070 using xda app-developers app
Option 2. Take firmware file, remove md5 extension. Leave it with something.tar. Use WINRAR or 7-ZIP, open it and remove all exept kernel.bin.md5 from it. And you have Odin flashable stock kernel that you need. Or flash CoCore for GB (I think there is some Odin flashable CoCore for GB), some user did that with no problems (used it as that second one that you need to flash from guide).
I was able to remove the kernel from the firmware file. The problem was when i tried to use Cgwin on that kernel file. I will try tonight to get CoCore for GB and post the result .
Thanks .
Sent from my GT-I9070 using xda app-developers app
Ciupy01 said:
I was able to remove the kernel from the firmware file. The problem was when i tried to use Cgwin on that kernel file. I will try tonight to get CoCore for GB and post the result .
Thanks .
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
No need for cygwin. Just read once again, more carefully now. You get file that you need by removing rest of the files. You leave just kernel.bin.md5 and you have Odin flashable tar file.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
No need for cygwin. Just read once again, more carefully now. You get file that you need by removing rest of the files. You leave just kernel.bin.md5 and you have Odin flashable tar file.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Ok, done it. The result si a archive named "I9070XXLK2_I9070OXFLE1_HOME.tar" with the file "kernel.bin.md5" inside it wihout any folder or file.
Is this the right result?
Sorry for the late reply, i was at wark.
Thanks.
Ciupy01 said:
Ok, done it. The result si a archive named "I9070XXLK2_I9070OXFLE1_HOME.tar" with the file "kernel.bin.md5" inside it wihout any folder or file.
Is this the right result?
Sorry for the late reply, i was at wark.
Thanks.
Click to expand...
Click to collapse
Yeah.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
Yeah.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Ok. I get the whole process. Flash rootkernel to get root access but with buggy kernel, then reflash with only stock kernel (without the rest of the files inside the firmware) to have stock kernel flashed with root.
Now, i am facing a new problem . I didn't know how to remove all the files except the kernel.tar.md5 file so i extracted the whole archive, deleted all except the kernel file and then added to new .tar archive.
As espected, i get in odin the following error:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> kernel.bin.md5
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Edit: if i try to simply delete the files in the renamed firmware file i get the error from 7zip "not implemented"
Ciupy01 said:
Ok. I get the whole process. Flash rootkernel to get root access but with buggy kernel, then reflash with only stock kernel (without the rest of the files inside the firmware) to have stock kernel flashed with root.
Now, i am facing a new problem . I didn't know how to remove all the files except the kernel.tar.md5 file so i extracted the whole archive, deleted all except the kernel file and then added to new .tar archive.
As espected, i get in odin the following error:
Edit: if i try to simply delete the files in the renamed firmware file i get the error from 7zip "not implemented"
Click to expand...
Click to collapse
No, do not do it that way. Remove this way: remove md5 extension of your firmware, open file with winrar or 7-zip and delete all except kernel. And you have it.
You can use this too http://forum.xda-developers.com/showthread.php?t=1873119
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
No, do not do it that way. Remove this way: remove md5 extension of your firmware, open file with winrar or 7-zip and delete all except kernel. And you have it.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
With winrar the "delete" button is unavailable and with 7zip i get "not implemented" error if i try to delete anything in the archive.
Ciupy01 said:
With winrar the "delete" button is unavailable and with 7zip i get "not implemented" error if i try to delete anything in the archive.
Click to expand...
Click to collapse
Send kernel, I will repack it for Odin with Cygwin. And see if it works. But you can use that kernel wirh TWRP too (I posted link).
Послато са GT-I9070 користећи Тапаток 2
I instaled the kernel with twrp . I hope it isn't buggy like the last one .
Thank's
Edit: It works like a charm. Thank you .
Sent from my GT-I9070 using xda app-developers app
Ciupy01 said:
I instaled the kernel with twrp . I hope it isn't buggy like the last one .
Thank's
Edit: It works like a charm. Thank you .
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
And now install CoCore for GB.
Link.
It can be done from TWRP. That is the best kernel we have for GB. :good:
Can I flash twrp recovery using odin without root?
Sent from my GT-I9070 using xda premium
Which android version are you on? For JB,there is only in CoCore-E kernel and you can flash by using Universal Kernel Flasher or via CWM.
Answering the questions and helping you is my favourite.
razavakil7995 said:
can i flash twrp recovery using odin without root?
Sent from my gt-i9070 using xda premium
Click to expand...
Click to collapse
no you cant
phyowaiummg said:
Which android version are you on? For JB,there is only in CoCore-E kernel and you can flash by using Universal Kernel Flasher or via CWM.
Answering the questions and helping you is my favourite.
Click to expand...
Click to collapse
I've heard it's not compatible in jelly bean. I'm currently on gingerbread, but if I flash Jelly bean, is there a risk of bricking or will the recovery be as it is??
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
I've heard it's not compatible in jelly bean. I'm currently on gingerbread, but if I flash Jelly bean, is there a risk of bricking or will the recovery be as it is??
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Who said that TWRP is not compatible with Jellybean? And no there is no risk of bricking your phone if you flash or update to Jellybean (but don't flash the Chinese firmware - I've heard that some people bricked their phone by doing that)... Just be sure that the firmware you will be flashing is the "right" one... I suppose that you are running the Indian Gingerbread firmware - so you can officially update to DULP8 (but backup all you data, apps, etc . first)... And yes, root it and install CoCore E 6.2 or 6.8 kernel - it has TWRP 2.5 with it...
Sami Kabir said:
Who said that TWRP is not compatible with Jellybean? And no there is no risk of bricking your phone if you flash or update to Jellybean (but don't flash the Chinese firmware - I've heard that some people bricked their phone by doing that)... Just be sure that the firmware you will be flashing is the "right" one... I suppose that you are running the Indian Gingerbread firmware - so you can officially update to DULP8 (but backup all you data, apps, etc . first)... And yes, root it and install CoCore E 6.2 or 6.8 kernel - it has TWRP 2.5 with it...
Click to expand...
Click to collapse
Ok but it is written that cocore kernel 6.8-or-something version is only compatible with jb. And I meant that flasing twrp when on jb is not supported. It was written on the thread. And by the way I am on JPLK2 firmware so is it safe to flash that kernel over twrp?.. I'm relatively newb to kernels but not custom roms, so it may seem like a noob question... my apologies
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
Ok but it is written that cocore kernel 6.8-or-something version is only compatible with jb. And I meant that flasing twrp when on jb is not supported. It was written on the thread. And by the way I am on JPLK2 firmware so is it safe to flash that kernel over twrp?.. I'm relatively newb to kernels but not custom roms, so it may seem like a noob question... my apologies
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Well if you are on gingerbread you need to flash the diego's twrp. If you update to jelly bean you have to flash cocore or thunderzap with twrp
Sent from my GT-I9070 using Tapatalk 4 Beta
KINGbabasula said:
Well if you are on gingerbread you need to flash the diego's twrp. If you update to jelly bean you have to flash cocore or thunderzap with twrp
Sent from my GT-I9070 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ok thanks. And by the way if I flash a custom rom which is jb based over twrp, will I lose the recovery
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
Ok thanks. And by the way if I flash a custom rom which is jb based over twrp, will I lose the recovery
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
No but you can flash just cm based rom on gb
Sent from my GT-I9070 using Tapatalk 4 Beta
KINGbabasula said:
No but you can flash just cm based rom on gb
Sent from my GT-I9070 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I want to flash galaxperia custom rom. Will I be able to flash it over twrp. I currently have stock gingerbread unrooted and twrp recovery....
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
I want to flash galaxperia custom rom. Will I be able to flash it over twrp. I currently have stock gingerbread unrooted and twrp recovery....
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
No. Galaxperia is jb stock based rom. You need to be on jellybean first to flash that. Once you're on jb, you can flash with either twrp/cwm. If you flash that while you're on gb, you're gonna stuck at bootscreen.
arffrhn said:
No. Galaxperia is jb stock based rom. You need to be on jellybean first to flash that. Once you're on jb, you can flash with either twrp/cwm. If you flash that while you're on gb, you're gonna stuck at bootscreen.
Click to expand...
Click to collapse
Ok. And one more question. I have twrp recovery and unrooted gingerbread as you know, so if I flash stock jb through odin, will I lose twrp or will my phone be bricked??
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
Ok. And one more question. I have twrp recovery and unrooted gingerbread as you know, so if I flash stock jb through odin, will I lose twrp or will my phone be bricked??
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
You need to stop worrying about "bricking your phone"... as long as you know what you are doing, nothing bad should happen to your phone... and Yes you will lose TWRP... but after updating to JB you can easily root it and install CoCore E kernel with TWRP.....
RazaVakil7995 said:
Ok. And one more question. I have twrp recovery and unrooted gingerbread as you know, so if I flash stock jb through odin, will I lose twrp or will my phone be bricked??
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Custom recovery (TWRP in your case) is on the same partition as kernel is. By flashing stock firmware kernel partition is getting wiped and new kernel with stock recovery will be instaled. First try to understand what is happening when you do something, and you will not have anything to worry about.
Againg what is already said - you can't install JB custom ROM on GB, and you can't install GB custom ROM on JB. Flashing firmware with Odin will not brick your phone, but only if you use firmware for your phone. If you have I9070P, I9070 firmware will brick it. And otherwise, if you have I9070, I9070P will brick it. Hard brick.
If you want TWRP you have to install kernel with TWRP embended in side of it. Rooting will not harm your phone, it just insert SU file that enable having root permissions.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
Custom recovery (TWRP in your case) is on the same partition as kernel is. By flashing stock firmware kernel partigion is getting wiped and new kernel with stock recovery will be instaled. First try to understand what is happening when you do something, and you will not have anything to worry about.
Againg what is already said - you can't install JB custom ROM on GB, and you can't install GB custom ROM on JB. Flashing firmware with Odin will not brick your phone, but only if you use firmware for your phone. If you have I9070P, I9070 firmware will brick it. And otherwise, if you have I9070, I9070P will brick it. Hard brick.
If you want TWRP you have to install kernel with TWRP embended in side of it. Rooting will not harm your phone, it just insert SU file that enable having root permissions.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
All right. I was doubtful because in my Micromax canvas 2, all I needed to do was to wipe /system,/data,cache partition and dalvik cache and I could flash just about any custom rom, so I was a little confused on this one. Thanks
Sent from my GT-I9070 using xda premium
RazaVakil7995 said:
I want to flash galaxperia custom rom. Will I be able to flash it over twrp. I currently have stock gingerbread unrooted and twrp recovery....
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
For galaxperia you have to update to jelly bean
Hello. I have installed kernel and Deodexed zip for s advance with cwm temporary recovery. After for install crt off effect I reboot the phone to recovery and I found cwm recovery. From temporary becomes to permanently.
Is possible to restore stock recovery??
Thanks in advance
Sent from my GT-I9070 XXLQG ITV using xda app developers
This is impossible Reboot to recovery now and you should see stock recovery
DVDandroid said:
Hello. I have installed kernel and Deodexed zip for s advance with cwm temporary recovery. After for install crt off effect I reboot the phone to recovery and I found cwm recovery. From temporary becomes to permanently.
Is possible to restore stock recovery??
Thanks in advance
Sent from my GT-I9070 XXLQG ITV using xda app developers
Click to expand...
Click to collapse
1st thing why did u post in Original Android Development section???
As u installed kernel The recovery automatically saved in it. And why do u want stock recovery??
Just to show off...
DVDandroid said:
Hello. I have installed kernel and Deodexed zip for s advance with cwm temporary recovery. After for install crt off effect I reboot the phone to recovery and I found cwm recovery. From temporary becomes to permanently.
Is possible to restore stock recovery??
Thanks in advance
Sent from my GT-I9070 XXLQG ITV using xda app developers
Click to expand...
Click to collapse
Please move this thread to Question and Answer forum.
Sent from my GT-I9070 using xda premium
It's a permanent recovery because you flashed a custom kernel, which includes the permanent recovery.
DVDandroid said:
Hello. I have installed kernel and Deodexed zip for s advance with cwm temporary recovery. After for install crt off effect I reboot the phone to recovery and I found cwm recovery. From temporary becomes to permanently.
Is possible to restore stock recovery??
Thanks in advance
Sent from my GT-I9070 XXLQG ITV using xda app developers
Click to expand...
Click to collapse
If you want CRT off effect you need CoCore kernel, that you installed. If you want stock recovery - you need stock kernel. And with stock kernel you can't use CRT off. You can't separate it, because we have one partition for both kernel and recovery.
Послато са GT-I9070 користећи Тапаталк 4
To get stock recovery back, you need stock kernel because it can't be separated. Unpack it from the official firmware and search for kernel.bin.md5. However, if you're using stock recovery, crt-off won't work and it's troublesome for not having custom recovery to flash anything (be it custom roms/custom kernel/scripts/fixes/updates/apps in flashable zip/themes..etc). You can do it with temp cwm but then, more work for you.
Sent from my GT-I9070 using xda app-developers app
shut_down said:
If you want CRT off effect you need CoCore kernel, that you installed. If you want stock recovery - you need stock kernel. And with stock kernel you can't use CRT off. You can't separate it, because we have one partition for both kernel and recovery.
Послато са GT-I9070 користећи Тапаталк 4
Click to expand...
Click to collapse
Ok. Thanks
Sent from my GT-I9070 XXLQG ITV using xda app developers
Is it possible to backup stock kernel from stock samsungs jelly bean rom? If it is, how to do it?
Sent from my GT-I9070 using Tapatalk
dimitris99 said:
Is it possible to backup stock kernel from stock samsungs jelly bean rom? If it is, how to do it?
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Yes. Remove md5 extension, open it with WinRAR and take kernel.bin.md5. You can use it with Universal Kernel Flasher. Next what can you do is to open it with WinRAR too, and erase all except two kernel files. You can use that file after that with Odin.
So kernel.bin.md5 is the kernel file and i can flash it with universal kernel flash, right?
Sent from my GT-I9070 using Tapatalk
dimitris99 said:
So kernel.bin.md5 is the kernel file and i can flash it with universal kernel flash, right?
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Correct.
i rooted my phone a couple of weeks ago thanks to a thread from u guys. am still on custom recovery cos i cant figure out a way to install clockword mod recovery. everytime i try to flash a rom it keeps saying signature verification failed. please help
First you started this topic in a wrong forum.
Second, if you need advices, you must give us some more details, like what version of Android you have (GB or JB).
Third, for CWM or TWRP you must flash first an custom kernel, and the only one custom kernel wich have development is from cocafe (CoCore E XX this is for 4.1.2 JB stock)
Steps:
1. Download and install UKF from here: http://forum.xda-developers.com/showthread.php?t=2137598
2. Download and install an custom explorer (search on Google Play for ES or Solid or any other you like)
3. Download kernel zip and extract the file with .md5 extension and put it to SD Card (external).
4. Open UKF and follow the steps for flash kernel.
5. Done with kernel , now you have an custom kernel with custom recovery (CWM or TWRP)
6. Search and follow the steps for each custom ROM's thread for flash.
PS: Warning, this procedure is only for JB.
aayushkhajuria2842 said:
Another guide to install cocor9.0 kernel with cwm or twrp recovery whichever u want
Click to expand...
Click to collapse
This is SPAM.
This is advertised for your website. If you want to help someone, make it by posting HERE all steps to be taken, as I did not with external link.
Okkkkkk bro
Sent from my GT-I9070 using xda app-developers app
thanks.. am getting on it
R_a_z_v_a_n said:
First you started this topic in a wrong forum.
Second, if you need advices, you must give us some more details, like what version of Android you have (GB or JB).
Third, for CWM or TWRP you must flash first an custom kernel, and the only one custom kernel wich have development is from cocafe (CoCore E XX this is for 4.1.2 JB stock)
Steps:
1. Download and install UKF from here: http://forum.xda-developers.com/showthread.php?t=2137598
2. Download and install an custom explorer (search on Google Play for ES or Solid or any other you like)
3. Download kernel zip and extract the file with .md5 extension and put it to SD Card (external).
4. Open UKF and follow the steps for flash kernel.
5. Done with kernel , now you have an custom kernel with custom recovery (CWM or TWRP)
6. Search and follow the steps for each custom ROM's thread for flash.
PS: Warning, this procedure is only for JB.
Click to expand...
Click to collapse
already have es explorer
how to i install the ufk... do i do it as a normall apk?
R_a_z_v_a_n said:
First you started this topic in a wrong forum.
Second, if you need advices, you must give us some more details, like what version of Android you have (GB or JB).
Third, for CWM or TWRP you must flash first an custom kernel, and the only one custom kernel wich have development is from cocafe (CoCore E XX this is for 4.1.2 JB stock)
Steps:
1. Download and install UKF from here: http://forum.xda-developers.com/showthread.php?t=2137598
2. Download and install an custom explorer (search on Google Play for ES or Solid or any other you like)
3. Download kernel zip and extract the file with .md5 extension and put it to SD Card (external).
4. Open UKF and follow the steps for flash kernel.
5. Done with kernel , now you have an custom kernel with custom recovery (CWM or TWRP)
6. Search and follow the steps for each custom ROM's thread for flash.
PS: Warning, this procedure is only for JB.
Click to expand...
Click to collapse
which kernel do you suppose i use and wher do idownload them.
would really appreciate links please
Only one kernel is available for gt i9070 that is cocore .......and universal kernel flasher can b downloaded from playstore
Sent from my GT-I9070 using xda app-developers app
derkyflick said:
which kernel do you suppose i use and wher do idownload them.
would really appreciate links please
Click to expand...
Click to collapse
You don't tell us WHAT FIRMWARE you have on your phone.
Jelly Bean or GingerBread?
R_a_z_v_a_n said:
You don't tell us WHAT FIRMWARE you have on your phone.
Jelly Bean or GingerBread?
Click to expand...
Click to collapse
jelly beam 4.1.2
i jus did what you said and my phone does not boot
i only get the buzzer and nothing on the screen
even if i plug it in charge still same thing only buzzer
am going crazy dont know what to do i dont have money for a new phone pls what caused that
Can I ask what have u done nd what is buzzer
Sent from my GT-I9070 using xda app-developers app
aayushkhajuria2842 said:
Can I ask what have u done nd what is buzzer
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
installed ukf
downloaded the kernel for cmw extracted and flashed kernel via ukf
it was successful so i pressed reboot and thats it
and the buzzer as in it only vibrates
Samsung logo appearing ?
Sent from my GT-I9070 using xda app-developers app
derkyflick said:
installed ukf
downloaded the kernel for cmw extracted and flashed kernel via ukf
it was successful so i pressed reboot and thats it
and the buzzer as in it only vibrates
Click to expand...
Click to collapse
You will not need to buy new phone. Just download stock JB firmware and flash it with Odin.
You can find firmware on samsung-updates.com - just do not flash I9070P firmware on I9070 phone, or I9070 on I9070P (it will HARDBRICK your device).
How to use Odin: http://forum.xda-developers.com/showthread.php?t=1985398
What was the name of kernel that you downloaded? Name of that zip.
If logo is not appearing nd it only vibrates then can odin method b used?
Sent from my GT-I9070 using xda app-developers app
but i cant get into download mode how then do i use odin
shut_down said:
You will not need to buy new phone. Just download stock JB firmware and flash it with Odin.
You can find firmware on samsung-updates.com - just do not flash I9070P firmware on I9070 phone, or I9070 on I9070P (it will HARDBRICK your device).
How to use Odin: http://forum.xda-developers.com/showthread.php?t=1985398
What was the name of kernel that you downloaded? Name of that zip.
Click to expand...
Click to collapse
i cant get into download mode
derkyflick said:
i cant get into download mode
Click to expand...
Click to collapse
Volume Down + Home (hardware key from the front part of the phone) and Power at the same time. You used those? Pull out battery, put back in and retry.
P.S. You did not tell what zip did you used.
---------- Post added at 05:11 PM ---------- Previous post was at 05:10 PM ----------
aayushkhajuria2842 said:
If logo is not appearing nd it only vibrates then can odin method b used?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
It could happen that he got in a bootloop.
the zip was posted in this thread
Sent from my GT-I9100 using xda app-developers app
Bro 2 months ago I also suffred from same thing didnt find anyway to fix it myself ....gave it to samsung care centre nd motherboard was replaced toh bring it back
Sent from my GT-I9070 using xda app-developers app
derkyflick said:
the zip was posted in this thread
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Again. Link is for CoCore, you did not write what was the zip name.
And again, did you try to pull out the battery and retry to go in download mode. What buttons do you use for getting in download mode?
You must give us more information that we can help you.
Volume up plus home button plus power button
Sent from my GT-I9100 using xda app-developers app