I am looking for a way to root my Samsung Galaxy S Advance l9070 XXLK2 phone.
I am using Odin.
Anyone know about a safe root?
Norwack said:
I am looking for a way to root my Samsung Galaxy S Advance l9070 XXLK2 phone.
I am using Odin.
Anyone know about a safe root?
Click to expand...
Click to collapse
It's better that you upgrade to jellybean and then root. Here is the guide: http://forum.xda-developers.com/showthread.php?t=2198341
I am also running 2.3.6 Gingearbread XXLK2 COA Romania region and looking to root. I tried the stock JB firmware from russia with root and CoCore and it's still having lag. My best option is the gingearbread for my country.
Now, my question is how can i root it?
I searched every link in xda and google to find a way for my specific firmware & country but with no results....
I found a thread in xda http://forum.xda-developers.com/showthread.php?t=1985199 where diego can pre-root the firmwares and post it there but i cannot post a request cuz i'm bigginer on the forum.
Can anyone help me?
Ciupy01 said:
I am also running 2.3.6 Gingearbread XXLK2 COA Romania region and looking to root. I tried the stock JB firmware from russia with root and CoCore and it's still having lag. My best option is the gingearbread for my country.
Now, my question is how can i root it?
I searched every link in xda and google to find a way for my specific firmware & country but with no results....
I found a thread in xda http://forum.xda-developers.com/showthread.php?t=1985199 where diego can pre-root the firmwares and post it there but i cannot post a request cuz i'm bigginer on the forum.
Can anyone help me?
Click to expand...
Click to collapse
Look for Qzem method, have all explained there. Just you need to repack kernel. But I explained couple times there how to avoid it. After rooting just use Triangle away to reset binary counter.
Послато са GT-I9070 користећи Тапаток 2
Thank you very much for the fast reply. I will go to find it and post here if any results .
Edit: Ok. I tried to to repack my kernel with Cygwin and got an error :command not found.
Could it be a faulty instalation of Cgwin?
Hello. I'm from Romania too, and running JB (Russian LQ4 fw), with CoCore, debloated, and working like a charm. No point to use GB to me, or to install another ROM at this moment. Prehaps a stable CM or MIUI.
So, my advice will be: install JB, root, debloat with Titanium Backup, run Greenify and flash another kernel. No more lag
If you have questions send me a PM.
Good luck!
Sent from my GT-I9070 using xda app-developers app
Sunt total de acord cu tine, highmage.
I'm tottaly agree with you, highmage. More stable is LQB from Serbia, rooted and debloated with custom kernel like CoCore 6.2.
Mine russian fw is working great, and is too much trouble to install another fw, root again, install applications, and all the rest
Sent from my GT-I9070 using xda app-developers app
I tried the jellybean with and without root, with and without cocore, serbia and russia fw and it was allways laggy. The ram memory was allways full, at about 500 or so being occupied. Some apps like Fx guru didn't even start becouse of lag... The GB fw is more practical and stable in my opinion. But to root it it's kinda complicated, on JB it was more simple.
Sent from my GT-I9070 using xda app-developers app
Option 2. Take firmware file, remove md5 extension. Leave it with something.tar. Use WINRAR or 7-ZIP, open it and remove all exept kernel.bin.md5 from it. And you have Odin flashable stock kernel that you need. Or flash CoCore for GB (I think there is some Odin flashable CoCore for GB), some user did that with no problems (used it as that second one that you need to flash from guide).
I was able to remove the kernel from the firmware file. The problem was when i tried to use Cgwin on that kernel file. I will try tonight to get CoCore for GB and post the result .
Thanks .
Sent from my GT-I9070 using xda app-developers app
Ciupy01 said:
I was able to remove the kernel from the firmware file. The problem was when i tried to use Cgwin on that kernel file. I will try tonight to get CoCore for GB and post the result .
Thanks .
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
No need for cygwin. Just read once again, more carefully now. You get file that you need by removing rest of the files. You leave just kernel.bin.md5 and you have Odin flashable tar file.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
No need for cygwin. Just read once again, more carefully now. You get file that you need by removing rest of the files. You leave just kernel.bin.md5 and you have Odin flashable tar file.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Ok, done it. The result si a archive named "I9070XXLK2_I9070OXFLE1_HOME.tar" with the file "kernel.bin.md5" inside it wihout any folder or file.
Is this the right result?
Sorry for the late reply, i was at wark.
Thanks.
Ciupy01 said:
Ok, done it. The result si a archive named "I9070XXLK2_I9070OXFLE1_HOME.tar" with the file "kernel.bin.md5" inside it wihout any folder or file.
Is this the right result?
Sorry for the late reply, i was at wark.
Thanks.
Click to expand...
Click to collapse
Yeah.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
Yeah.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Ok. I get the whole process. Flash rootkernel to get root access but with buggy kernel, then reflash with only stock kernel (without the rest of the files inside the firmware) to have stock kernel flashed with root.
Now, i am facing a new problem . I didn't know how to remove all the files except the kernel.tar.md5 file so i extracted the whole archive, deleted all except the kernel file and then added to new .tar archive.
As espected, i get in odin the following error:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> kernel.bin.md5
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Edit: if i try to simply delete the files in the renamed firmware file i get the error from 7zip "not implemented"
Ciupy01 said:
Ok. I get the whole process. Flash rootkernel to get root access but with buggy kernel, then reflash with only stock kernel (without the rest of the files inside the firmware) to have stock kernel flashed with root.
Now, i am facing a new problem . I didn't know how to remove all the files except the kernel.tar.md5 file so i extracted the whole archive, deleted all except the kernel file and then added to new .tar archive.
As espected, i get in odin the following error:
Edit: if i try to simply delete the files in the renamed firmware file i get the error from 7zip "not implemented"
Click to expand...
Click to collapse
No, do not do it that way. Remove this way: remove md5 extension of your firmware, open file with winrar or 7-zip and delete all except kernel. And you have it.
You can use this too http://forum.xda-developers.com/showthread.php?t=1873119
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
No, do not do it that way. Remove this way: remove md5 extension of your firmware, open file with winrar or 7-zip and delete all except kernel. And you have it.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
With winrar the "delete" button is unavailable and with 7zip i get "not implemented" error if i try to delete anything in the archive.
Ciupy01 said:
With winrar the "delete" button is unavailable and with 7zip i get "not implemented" error if i try to delete anything in the archive.
Click to expand...
Click to collapse
Send kernel, I will repack it for Odin with Cygwin. And see if it works. But you can use that kernel wirh TWRP too (I posted link).
Послато са GT-I9070 користећи Тапаток 2
I instaled the kernel with twrp . I hope it isn't buggy like the last one .
Thank's
Edit: It works like a charm. Thank you .
Sent from my GT-I9070 using xda app-developers app
Ciupy01 said:
I instaled the kernel with twrp . I hope it isn't buggy like the last one .
Thank's
Edit: It works like a charm. Thank you .
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
And now install CoCore for GB.
Link.
It can be done from TWRP. That is the best kernel we have for GB. :good:
Related
Can someone create a flashable zip of stock kernel of jellybean rom for 9070P?
I want to try kernels for 9070 but i'm afraid of some bugs so i want to return easlily to stock kernel...
FollonSaxBass said:
Can someone create a flashable zip of stock kernel of jellybean rom for 9070P?
I want to try kernels for 9070 but i'm afraid of some bugs so i want to return easlily to stock kernel...
Click to expand...
Click to collapse
For returning to stock kernel u will have to flash the firmware using odin
Sent from my GT-I9070 using xda app-developers app
Chirag_Galani said:
For returning to stock kernel u will have to flash the firmware using odin
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
He can use just kernel, but we do not have much P users that can provide him that. Use your firmware, remove md5 extension at the end of filename. Open it with winrar or 7-zip and remove everything except kernels. And flash it with Odin.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
He can use just kernel, but we do not have much P users that can provide him that. Use your firmware, remove md5 extension at the end of filename. Open it with winrar or 7-zip and remove everything except kernels. And flash it with Odin.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Ok thank you shut down but i haven't always the possibility to flash with Odin so i decided to do a nandroid backup with temporary Cwm ready to be restored Thanks for the info
XXLPD stock kernel
Here is the Odin flashable XXLPD stock kernel.
Use only i9070P.
Download this: deleted
Run Odin as administrator. Add the xxlpd_kernel.tar.md5 files in PDA section.
Reboot the phone in download mode and flash the file.
So that the original kernel will be on your phone.
Agadoo said:
Here is the Odin flashable XXLPD stock kernel.
Use only i9070P.
Download this: link
Run Odin as administrator. Add the xxlpd_kernel.tar.md5 files in PDA section.
Reboot the phone in download mode and flash the file.
So that the original kernel will be on your phone.
Click to expand...
Click to collapse
it says INVALID MD5 after start flash...
FollonSaxBass said:
it says INVALID MD5 after start flash...
Click to expand...
Click to collapse
Fixed Odin flashable XXLPD stock kernel: [link]
Dear Note lovers,
Since many people have bricked their note 10.1 Nxxx after the 4.1.2 OTA, and couldn't find a PIT file. I'm lucky to tell you i have the PIT file for the note 10.1 GT8010.
I posted this in Development since it seems to be something that everyone needs.
You can download it here:
N8000(Android 4.0.4 PIT):
https://mega.co.nz/#!ltUXCYha!YLW3AFWNI-tyAP6GIRWJySHMdFo0yq2LaQQtzn5ZFD0
https://www.dropbox.com/s/43h458tcy0vsavr/GT-N8000_note10.pit
N8010(Android 4.0.4 PIT):
https://mega.co.nz/#!hwMh2QAb!G815sjAUl_zRcy574AOmuWcw6QYQE4sT8V0GpoCOKV4
https://www.dropbox.com/s/gf2jrbs325p3pbv/GT-N8010_note10.pit
N8020(Android 4.1.2 PIT):
https://mega.co.nz/#!ExEk2BKD!aBnCxFoaxofbXTN49YsJ6FCYmktjSziy1T_9cMunSfw
https://www.dropbox.com/s/n2gt3307jo51i77/GT-N8020_note10.pit
EDIT: Sorry i havent been commenting on this thread anymore for ages. it has been a long time since i had this tab.
EDIT 2: How to save your own PIT file: http://forum.xda-developers.com/showthread.php?p=41158546#post41158546
Credits to ghibli3
If there are any more note versions, please tell me.
How about verizon variant?
Sent from my SCH-I925 using xda premium
Awesome, thank you, will download in advance to prevent any future damage.
One question though, the N8020 was released later than the other versions and hence I don't think it ever existed with android 4.0.4.
Are you sure the pit file for N8020 is for 4.0.4, and not for 4.1.1 or 4.1.2?
Once again, thank you!
I not arrive to download from MEGA.
On your signature You have the Dropbox. Can You send it from N8000 by Dropbox please?
Thanks
ValenteL said:
I not arrive to download from MEGA.
On your signature You have the Dropbox. Can You send it from N8000 by Dropbox please?
Thanks
Click to expand...
Click to collapse
Dropbox Links Added!
It seems like the PIT files for the N8013 and N8005 are hard to get your hands on. PM me if you have them!
Hello guYz a small question what does pit files do excatly and can it help me with this problem
http://forum.xda-developers.com/showthread.php?t=2395351
bilal.23 said:
Hello guYz a small question what does pit files do excatly and can it help me with this problem
http://forum.xda-developers.com/showthread.php?t=2395351
Click to expand...
Click to collapse
You can download the original firmware from sammobile. Then you can flash back with odin. a PIT file lets you repartition your filesystem. So no garbage is left. And it can fix bricks.
paultje162 said:
You can download the original firmware from sammobile. Then you can flash back with odin. a PIT file lets you repartition your filesystem. So no garbage is left. And it can fix bricks.
Click to expand...
Click to collapse
thank u for reply now iam having another problem that is i flash a stock ics rom and my device works but no iam missing my efs file so i have a question with whic rom i can flash pit files with ics or jb and the pit files here is for 16 or 32 or 64 gb note and can it help me with my issue thanks
desperado
Hey guys, i need some help here.. my n8010 won't boot neither with stock firmware 4.1.2 from sammobile nor with any other rom.
I think i f*ed it all up when i format everything i could when i was trying to install CM10.2 only to figure in the end that it was meant for n8013 and mine is n8010 :S
So i flashed stock fw via Odin, but it doesn't work..i thought i need the pit file, but i found only 4.0.4 pit file and fw on the net are only 4.1.2, so i think they are not compatible and my Note is still not working..
Anyone can help me with 4.1.2 pit file please?
Minato04 said:
Hey guys, i need some help here.. my n8010 won't boot neither with stock firmware 4.1.2 from sammobile nor with any other rom.
I think i f*ed it all up when i format everything i could when i was trying to install CM10.2 only to figure in the end that it was meant for n8013 and mine is n8010 :S
So i flashed stock fw via Odin, but it doesn't work..i thought i need the pit file, but i found only 4.0.4 pit file and fw on the net are only 4.1.2, so i think they are not compatible and my Note is still not working..
Anyone can help me with 4.1.2 pit file please?
Click to expand...
Click to collapse
Try flashing stock 4.0.4 through odin , probably you will get bootloop, flash CWM through odin & try wiping data,cache & dalvik through CWM.
Where can I find a 4.0.4 firmware?
Sent from my Nexus 4 using Tapatalk 4
Minato04 said:
Where can I find a 4.0.4 firmware?
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/
Thank you, but there is not. I already checked there, there are only 4.1.2 firmwares
Sent from my Nexus 4 using Tapatalk 4
Minato04 said:
Thank you, but there is not. I already checked there, there are only 4.1.2 firmwares
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
You can Flash German DBT 4.0.4,
http://www.sammobile.com/firmwares/1/?model=GT-N8010&pcode=DBT#firmware
I love you <3 I'm downloading it now, I will update you later.. Thank you so much!
PS: how did you find those old firmwares? I couldn't find them
Sent from my Nexus 4 using Tapatalk 4
Failure.. With Odin I flashed Pit and 4.0.4 fw, but still doesn't work..
System status is still custom and getting the error in the image..
When flashing is finished, Odin gives me a green pass, I don't understand what's the problem..
Sent from my Nexus 4 using Tapatalk 4
Hi, any chance of a 4.12 pit for n8000
Thanks
Sent from my GT-N8000 using xda app-developers app
Minato04 said:
Failure.. With Odin I flashed Pit and 4.0.4 fw, but still doesn't work..
System status is still custom and getting the error in the image..
When flashing is finished, Odin gives me a green pass, I don't understand what's the problem..
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
Try flashing only rom without PIT.
hi you have revived your tab??
i got the same issue with my tab
Apologies for what looks like a simple question but I'm having real trouble finding the answer on how to upgrade my stock Samsung Galaxy S Advance which seems to have a firmware that isn't listed on this site under the usual 'guide' threads...
Model: GT-I9070P
PDA: I9070PBVLF1
Phone: I9070PBVLF1
CSC: I9070PORALF1
Kernel: 2.6.35.7-I9070PBVLF1-CL1155037 [email protected] #2
Carrier is Orange UK (Orange are now called EE if that makes a difference) - this is the bit that is causing me problems - the CSC is ORA. I can find TMU (T-Mobile) but not ORA...
Currently running Gingerbread 2.3.6 but my aim is to upgrade to JellyBean if I can find any of the correct images!
I've tried using SuperOneClick, Motochopper-SuperSU and SRSRoot to unlock the phone but with no luck.
Any help would be greatly appreciated,
Thanks!
You did not get update via Kies? Or OTA? Did you ask your provider? Phone is simlocked to provider? I am not sure, but I think that caused problems if you try some other firmware (install with Odin). That what you have been trying is to root phone, and that has nothing to do with JB.
Послато са GT-I9070 користећи Тапаталк 4
I've fully updated my phone using kies but this is still only gingerbread, jellybean is apparently not released yet for my model.
My phone also does not get OTA updates
I haven't tried asking my provider, I guess I could go into a store and ask.
I was trying to root my phone as it seems to be the first step in all the guides I've read.
Sent from my GT-I9070P using xda app-developers app
doggeh86 said:
I've fully updated my phone using kies but this is still only gingerbread, jellybean is apparently not released yet for my model.
My phone also does not get OTA updates
I haven't tried asking my provider, I guess I could go into a store and ask.
I was trying to root my phone as it seems to be the first step in all the guides I've read.
Sent from my GT-I9070P using xda app-developers app
Click to expand...
Click to collapse
You can flash JB firmware with Odin. You do not need root for that. But I am not sure how simlocked phone will react on that. Searc. For it or find someone with simlocked phone and ask. I can't tell you do it, and after that you maybe have some problems.
Послато са GT-I9070 користећи Тапаталк 4
Ah okay thanks for the info. I'll go into the store and see what they say. After that I'll see how brave I feel!
Sent from my GT-I9070P using xda app-developers app
doggeh86 said:
Ah okay thanks for the info. I'll go into the store and see what they say. After that I'll see how brave I feel!
Sent from my GT-I9070P using xda app-developers app
Click to expand...
Click to collapse
Do not flash I9070 firmware, if you are going to flash. Just I9070P, otherwise you will hardbrick phone.
Послато са GT-I9070 користећи Тапаталк 4
Is it possible to backup stock kernel from stock samsungs jelly bean rom? If it is, how to do it?
Sent from my GT-I9070 using Tapatalk
dimitris99 said:
Is it possible to backup stock kernel from stock samsungs jelly bean rom? If it is, how to do it?
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Yes. Remove md5 extension, open it with WinRAR and take kernel.bin.md5. You can use it with Universal Kernel Flasher. Next what can you do is to open it with WinRAR too, and erase all except two kernel files. You can use that file after that with Odin.
So kernel.bin.md5 is the kernel file and i can flash it with universal kernel flash, right?
Sent from my GT-I9070 using Tapatalk
dimitris99 said:
So kernel.bin.md5 is the kernel file and i can flash it with universal kernel flash, right?
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Correct.
i rooted my phone a couple of weeks ago thanks to a thread from u guys. am still on custom recovery cos i cant figure out a way to install clockword mod recovery. everytime i try to flash a rom it keeps saying signature verification failed. please help
First you started this topic in a wrong forum.
Second, if you need advices, you must give us some more details, like what version of Android you have (GB or JB).
Third, for CWM or TWRP you must flash first an custom kernel, and the only one custom kernel wich have development is from cocafe (CoCore E XX this is for 4.1.2 JB stock)
Steps:
1. Download and install UKF from here: http://forum.xda-developers.com/showthread.php?t=2137598
2. Download and install an custom explorer (search on Google Play for ES or Solid or any other you like)
3. Download kernel zip and extract the file with .md5 extension and put it to SD Card (external).
4. Open UKF and follow the steps for flash kernel.
5. Done with kernel , now you have an custom kernel with custom recovery (CWM or TWRP)
6. Search and follow the steps for each custom ROM's thread for flash.
PS: Warning, this procedure is only for JB.
aayushkhajuria2842 said:
Another guide to install cocor9.0 kernel with cwm or twrp recovery whichever u want
Click to expand...
Click to collapse
This is SPAM.
This is advertised for your website. If you want to help someone, make it by posting HERE all steps to be taken, as I did not with external link.
Okkkkkk bro
Sent from my GT-I9070 using xda app-developers app
thanks.. am getting on it
R_a_z_v_a_n said:
First you started this topic in a wrong forum.
Second, if you need advices, you must give us some more details, like what version of Android you have (GB or JB).
Third, for CWM or TWRP you must flash first an custom kernel, and the only one custom kernel wich have development is from cocafe (CoCore E XX this is for 4.1.2 JB stock)
Steps:
1. Download and install UKF from here: http://forum.xda-developers.com/showthread.php?t=2137598
2. Download and install an custom explorer (search on Google Play for ES or Solid or any other you like)
3. Download kernel zip and extract the file with .md5 extension and put it to SD Card (external).
4. Open UKF and follow the steps for flash kernel.
5. Done with kernel , now you have an custom kernel with custom recovery (CWM or TWRP)
6. Search and follow the steps for each custom ROM's thread for flash.
PS: Warning, this procedure is only for JB.
Click to expand...
Click to collapse
already have es explorer
how to i install the ufk... do i do it as a normall apk?
R_a_z_v_a_n said:
First you started this topic in a wrong forum.
Second, if you need advices, you must give us some more details, like what version of Android you have (GB or JB).
Third, for CWM or TWRP you must flash first an custom kernel, and the only one custom kernel wich have development is from cocafe (CoCore E XX this is for 4.1.2 JB stock)
Steps:
1. Download and install UKF from here: http://forum.xda-developers.com/showthread.php?t=2137598
2. Download and install an custom explorer (search on Google Play for ES or Solid or any other you like)
3. Download kernel zip and extract the file with .md5 extension and put it to SD Card (external).
4. Open UKF and follow the steps for flash kernel.
5. Done with kernel , now you have an custom kernel with custom recovery (CWM or TWRP)
6. Search and follow the steps for each custom ROM's thread for flash.
PS: Warning, this procedure is only for JB.
Click to expand...
Click to collapse
which kernel do you suppose i use and wher do idownload them.
would really appreciate links please
Only one kernel is available for gt i9070 that is cocore .......and universal kernel flasher can b downloaded from playstore
Sent from my GT-I9070 using xda app-developers app
derkyflick said:
which kernel do you suppose i use and wher do idownload them.
would really appreciate links please
Click to expand...
Click to collapse
You don't tell us WHAT FIRMWARE you have on your phone.
Jelly Bean or GingerBread?
R_a_z_v_a_n said:
You don't tell us WHAT FIRMWARE you have on your phone.
Jelly Bean or GingerBread?
Click to expand...
Click to collapse
jelly beam 4.1.2
i jus did what you said and my phone does not boot
i only get the buzzer and nothing on the screen
even if i plug it in charge still same thing only buzzer
am going crazy dont know what to do i dont have money for a new phone pls what caused that
Can I ask what have u done nd what is buzzer
Sent from my GT-I9070 using xda app-developers app
aayushkhajuria2842 said:
Can I ask what have u done nd what is buzzer
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
installed ukf
downloaded the kernel for cmw extracted and flashed kernel via ukf
it was successful so i pressed reboot and thats it
and the buzzer as in it only vibrates
Samsung logo appearing ?
Sent from my GT-I9070 using xda app-developers app
derkyflick said:
installed ukf
downloaded the kernel for cmw extracted and flashed kernel via ukf
it was successful so i pressed reboot and thats it
and the buzzer as in it only vibrates
Click to expand...
Click to collapse
You will not need to buy new phone. Just download stock JB firmware and flash it with Odin.
You can find firmware on samsung-updates.com - just do not flash I9070P firmware on I9070 phone, or I9070 on I9070P (it will HARDBRICK your device).
How to use Odin: http://forum.xda-developers.com/showthread.php?t=1985398
What was the name of kernel that you downloaded? Name of that zip.
If logo is not appearing nd it only vibrates then can odin method b used?
Sent from my GT-I9070 using xda app-developers app
but i cant get into download mode how then do i use odin
shut_down said:
You will not need to buy new phone. Just download stock JB firmware and flash it with Odin.
You can find firmware on samsung-updates.com - just do not flash I9070P firmware on I9070 phone, or I9070 on I9070P (it will HARDBRICK your device).
How to use Odin: http://forum.xda-developers.com/showthread.php?t=1985398
What was the name of kernel that you downloaded? Name of that zip.
Click to expand...
Click to collapse
i cant get into download mode
derkyflick said:
i cant get into download mode
Click to expand...
Click to collapse
Volume Down + Home (hardware key from the front part of the phone) and Power at the same time. You used those? Pull out battery, put back in and retry.
P.S. You did not tell what zip did you used.
---------- Post added at 05:11 PM ---------- Previous post was at 05:10 PM ----------
aayushkhajuria2842 said:
If logo is not appearing nd it only vibrates then can odin method b used?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
It could happen that he got in a bootloop.
the zip was posted in this thread
Sent from my GT-I9100 using xda app-developers app
Bro 2 months ago I also suffred from same thing didnt find anyway to fix it myself ....gave it to samsung care centre nd motherboard was replaced toh bring it back
Sent from my GT-I9070 using xda app-developers app
derkyflick said:
the zip was posted in this thread
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Again. Link is for CoCore, you did not write what was the zip name.
And again, did you try to pull out the battery and retry to go in download mode. What buttons do you use for getting in download mode?
You must give us more information that we can help you.
Volume up plus home button plus power button
Sent from my GT-I9100 using xda app-developers app