Related
Solved - Follow this - http://forums.webosnation.com/hp-touchpad/318426-how-install-android-without-setting-up-webos.html
Here is a series of steps that lead me to this problem.
1) I wanted to give my touchpad to a friend of mine. So I removed the dual boot. I also booted to WebOs and did a factory reset. The touch-pad is now in pristine state. So far so good. No problems.
2) My friend takes the touchpad from me but never goes thru the setup. He then looses it !!
3) Once I came to know about it, I went online and initiated a remote wipe. I don't know why I did that since it was already clean (from step 1 above). I think this action of mine created a problem.
4) My friend finds the Touchpad. It was in his home all along. So I charged it and then boot into WebOs.
5) This is where the problem starts. The initial webOs setup requires that I set up a new account with HP ( or use an existing one). First, I tried to use my existing account (the same that I used in step 3). It won't log in saying that there is a login error, try again or contact HP support. The password is correct, since I am using the same password on the HP website and I can see my device there.
6) I then tried to create a new account using a different email. To my surprise, that failed too. I tried a few other emails, all with same results. The new account creation was failing in all these cases.
7) Now I am stuck. I have emailed HP for support but I was hoping someone else had any other ideas. I am out of warranty. So email support is the only thing that I can get from HP.
8) Is there is a way I can install Android on it without launching webOs - Can I create a cmInstall folder from WebOs recovery ? ANy Novacom driver option to access the file system ? The only way to get the cminstall folder (that I know of) is to boot into webOs and I cannot do that.
I have tried a few other things that came to my mind.
1) I used WebOs Doctor to do a clean install. It still did not help. The log-in still fails.
2) I removed the device from my old account thinking that it might be the reason my new account creation is failing. But that did not help.
Any suggestion or links that might help me would be really appreciated.
[email protected] said:
Here is a series of steps that lead me to this problem.
1) I wanted to give my touchpad to a friend of mine. So I removed the dual boot. I also booted to WebOs and did a factory reset. The touch-pad is now in pristine state. So far so good. No problems.
2) My friend takes the touchpad from me but never goes thru the setup. He then looses it !!
3) Once I came to know about it, I went online and initiated a remote wipe. I don't know why I did that since it was already clean (from step 1 above). I think this action of mine created a problem.
4) My friend finds the Touchpad. It was in his home all along. So I charged it and then boot into WebOs.
5) This is where the problem starts. The initial webOs setup requires that I set up a new account with HP ( or use an existing one). First, I tried to use my existing account (the same that I used in step 3). It won't log in saying that there is a login error, try again or contact HP support. The password is correct, since I am using the same password on the HP website and I can see my device there.
6) I then tried to create a new account using a different email. To my surprise, that failed too. I tried a few other emails, all with same results. The new account creation was failing in all these cases.
7) Now I am stuck. I have emailed HP for support but I was hoping someone else had any other ideas. I am out of warranty. So email support is the only thing that I can get from HP.
8) Is there is a way I can install Android on it without launching webOs - Can I create a cmInstall folder from WebOs recovery ? ANy Novacom driver option to access the file system ? The only way to get the cminstall folder (that I know of) is to boot into webOs and I cannot do that.
I have tried a few other things that came to my mind.
1) I used WebOs Doctor to do a clean install. It still did not help. The log-in still fails.
2) I removed the device from my old account thinking that it might be the reason my new account creation is failing. But that did not help.
Any suggestion or links that might help me would be really appreciated.
Click to expand...
Click to collapse
When you tried to doctor, did you go back to 3.0.0? If you didn't, here's a good guide :
http://forum.xda-developers.com/showthread.php?t=1426244
You have to go back to 3.0.0 because it's the only one who can handle partitions. After you successfully do 3.0.0, you can update to 3.0.5 OTA. Then install android the usual way.
Read the whole thing. Around page 12 there's a good work around if you're having trouble with novaterm.
Good luck.
chicle_11 said:
When you tried to doctor, did you go back to 3.0.0? If you didn't, here's a good guide :
http://forum.xda-developers.com/showthread.php?t=1426244
You have to go back to 3.0.0 because it's the only one who can handle partitions. After you successfully do 3.0.0, you can update to 3.0.5 OTA. Then install android the usual way.
Read the whole thing. Around page 12 there's a good work around if you're having trouble with novaterm.
Good luck.
Click to expand...
Click to collapse
Yes I did doctor to 3.0.0. The problem is not that I am unable to install WebOs. The problem is that when the setup screen comes and I provide the user-id/password, it doesn't take it. It seems like my Serial Number is somehow blocked by HP since I did a remote erase. Or maybe the remote erase and the initial setup are getting deadlocked - neither the remote erase can complete since its waiting for login to happen - and the login cannot complete since it thinks erase is in progress.
[email protected] said:
Yes I did doctor to 3.0.0. The problem is not that I am unable to install WebOs. The problem is that when the setup screen comes and I provide the user-id/password, it doesn't take it. It seems like my Serial Number is somehow blocked by HP since I did a remote erase. Or maybe the remote erase and the initial setup are getting deadlocked - neither the remote erase can complete since its waiting for login to happen - and the login cannot complete since it thinks erase is in progress.
Click to expand...
Click to collapse
Then I think only HP support can help. They have to unblock your serial number / account so you can have access.
chicle_11 said:
Then I think only HP support can help. They have to unblock your serial number / account so you can have access.
Click to expand...
Click to collapse
But I was hoping that even though I cannot log in, I can at least install Android. But to do that, I need to be able to create a cminstall folder and I cannot do that unless I can see the touch-pad file system from my PC. I was hoping that there is a way to do that without logging into WebOs. Meanwhile I am still waiting for HP to respond back to my email !!
Possible solution to this problem - bypass activation
http://forums.webosnation.com/hp-to...ources/317164-activation-bypass-touchpad.html
I haven't tried it but this gives me hope. I might be able to bypass activation after all !!
How to Install Android without setting up webOS
Seems like someone had the exact same problem that I had. Thanks Google.
http://forums.webosnation.com/hp-touchpad/318426-how-install-android-without-setting-up-webos.html
Hi all, finally I registered here at xda today because of the great new HP TPToolbox that jcsullins provides here.
This is really really great !! Many thanks !
As a newcomer to this forum I somehow can not comment on the original thread ( ) although I'm developer for decades ..
Well - so far I've been around on webosnation and other forum - but here I find that the core of development happens here.
XDA seems to be a great place to be - as a developer.
1. About the posting from jcsullins: http://forum.xda-developers.com/showpost.php?p=52765181&postcount=5
It read:
> Only Touchpad Wifi supported (not 4G) at this time
I assume this is really limited to the released HP TouchPad and does not include the never released HP TouchPad Go (7" device) - right ?
2. I read:
> Reflash A6 Firmware allows you to reflash the A6 firmware.
I very much assume I can not use this if my TP is bricked (my TP does not show anything on the screen and no light at the home button).
So - I guess - I first need to do through the TPdebrick procedure.
Sure I know these instructions: http://rootzwiki.com/topic/38786-tpdebrick-v004 Again, thanks to jcsullins for providing these too.
( Also - I wonder if there is a way to use these instructions from a Win7 system too ?)
3. In terms of using TPToolbox to get Android installed on TP:
Till today I run only webos 3.0.5 on my TouchPads and I want to keep webos around. I have 32GB (Wifi) and 64GB (Wifi) and TP GO (Wifi).
What is the recommendation before installing some Android (4.4) on a TP. Do I need to rearrange / clean up some of the existing webos volumes?
Imagine - I have no experience with Android setup. I read all of the TPToolbox thread - but found no guidance for people who want to keep webos on the same device. And I have no good understanding of what the limitations/drawbacks are when running webos and Android on the same device.
4. I read:
> It will then install moboot (which is included in TPToolbox)
I have no clear understand what moboot is doing and if needed how to remove it again. Will it allow me to boot in Android or webos ?
How many Android versions can I install in parallel and then select one at boot time ?
5. A final question for now. Is there any consideration that in future TPToolbox could allow installing openWebOS if this becomes available for existing TP devices?
anyone with some answer please ?
anyone with some answer please ?
No need to answer all questions at once.
I'm most interested in comments about question (3):
what the limitations/drawbacks are when running webos and Android on the same device: 32GB (Wifi) and 64GB (Wifi) ?
[email protected] said:
anyone with some answer please ?
No need to answer all questions at once.
I'm most interested in comments about question (3):
what the limitations/drawbacks are when running webos and Android on the same device: 32GB (Wifi) and 64GB (Wifi) ?
Click to expand...
Click to collapse
OPINIONS ARE subjective as you you appear to have several tablets it is in your best interests to test out and find what works for you. I personally am using Milaq's.
Have fun trying them.
sstar said:
OPINIONS ARE subjective as you you appear to have several tablets it is in your best interests to test out and find what works for you. I personally am using Milaq's.
Have fun trying them.
Click to expand...
Click to collapse
Thanks for your comment. So far I have no idea what "Milaq" is: I assume some kind of Android version - but such version is not documented with TPToolbox - so, for sure I will not use that for now.
My question (3) is more about hard facts: what the limitations/drawbacks are when running webos and Android on the same device: 32GB (Wifi) and 64GB (Wifi) ?
Will both OS run well on a 32GB system if both are installed and they use some shared disk space (volume?). I would consider at least 5GB of shared disk space to allow (video) file exchange on the device.
What is a recommended configuration to run webos and Android on the same device. Or doesn't it make sense at all and better use 2 devices?
Will TPToolbox optimize the volume size for both OS?
Can I configure the default OS at boot time? How to do? (Can I run Android apps inside a webos window?)
Unable to navigate TP Toolbox UI
I'm trying to use TP Toolbox to install Android on my TP. When I reach the TouchPad Toolbox UI on the tablet, the volume keys aren't working to navigate, so I have no way to select Complete Data Reset. Any ideas??
[email protected] said:
Thanks for your comment. So far I have no idea what "Milaq" is: I assume some kind of Android version - but such version is not documented with TPToolbox - so, for sure I will not use that for now.
My question (3) is more about hard facts: what the limitations/drawbacks are when running webos and Android on the same device: 32GB (Wifi) and 64GB (Wifi) ?
Will both OS run well on a 32GB system if both are installed and they use some shared disk space (volume?). I would consider at least 5GB of shared disk space to allow (video) file exchange on the device.
What is a recommended configuration to run webos and Android on the same device. Or doesn't it make sense at all and better use 2 devices?
Will TPToolbox optimize the volume size for both OS?
Can I configure the default OS at boot time? How to do? (Can I run Android apps inside a webos window?)
Click to expand...
Click to collapse
As you point out, this is the place for answers. All of your questions have been answered in other threads. Search is your friend. WIth respect to the TP GO, it does not appear to have ever been released, but if you have one, you'll have to answer your own questions because no one here has ever mentioned having one:
http://www.pcmag.com/article2/0,2817,2397197,00.asp
Touchpad linked to google account acting badly
J Scullins Toolbox installed with ease. Many thanks. Freed up memory and eliminated WebOS (pretty but pretty useless). Booted fine, loaded CM 11 4.4.2. Then asked if I wanted to restored my google apps from google account. I did. Began updating apps, but included all apps I've ever installed on any android device and loaded my current phone (Galaxy 3) wall paper. Repeated message -> "Unfortunately Trebuchet has stopped" Did not seem to affect downloading updates. Then died. Plugging into charger (wall socket) did not wake it up. Charged all night. Nothing. Unplugged and plugged in again, self-rebooted to boot menu, but has phone screen and shows charging at 1%. Should I reboot to restore mode and start over? Anyone having charging issues after using Toolbox? Thanks.
shumash said:
As you point out, this is the place for answers. All of your questions have been answered in other threads. Search is your friend.
Click to expand...
Click to collapse
Thanks for promising that I should be able to find answer. I did read the complete thread about TPToolbox and few others too and search before I started this new thread - but my above 5 questions remained open. If anyone has found a good pointer please paste a URL here.
If I find correct answer myself I will put such links here.
ad (4) I think I understand moboot good enough for now. In my words it is a boot manager that comes with Android or at least you can use with Android. It is not a webos app or so. Not 100% sure how to get it on the TP device - but I assume when I install Android for first time it will also install and it will somehow stay even if Android gets deinstalled. Anyhow - any link to a good wiki page would be much appreciated.
ad (1) Yes, TP GO is a rare device - but several 100 seem to be around by now. Many of these come with some Android 2.X version installed. ( Mine was patched to webos 3.0.5 ) Ok, if noone has a GO here I have to assume that TPToolbox does not support / was not tested on TP GO. So far posting from jcsullins does not mention the TP GO at all: http://forum.xda-developers.com/show...81&postcount=5
mheath said:
I'm trying to use TP Toolbox to install Android on my TP. When I reach the TouchPad Toolbox UI on the tablet, the volume keys aren't working to navigate, so I have no way to select Complete Data Reset. Any ideas??
Click to expand...
Click to collapse
I have a TP 4G - sounds like this could be an issue? Will this Toolbox installation work on the 4G? If not, is there a good alternative to install Android?
mheath said:
I have a TP 4G - sounds like this could be an issue? Will this Toolbox installation work on the 4G? If not, is there a good alternative to install Android?
Click to expand...
Click to collapse
The original TPtoolbox thread answers this 4G question as: http://forum.xda-developers.com/showpost.php?p=52923285&postcount=65
Toolbox not working for me
Hello,
i tried Toolbox to bring life back to my Touchpad.
When i'm running this program it starts very well but i can't get the menue.
So it's not possible to run one of the menue-points.
I use Windows 7 64bit, the TP is connected with USB-sign on.
My problem:
In the WebOs-log the last line shows a flash-failure.
When i'm starting the TP, first a static HP-logo comes up, followed from a rotating HP-logo,
the a screen changes from black to white with a grey button rotating.
Any idea?
Thanks!
Rekaro said:
Hello,
i tried Toolbox to bring life back to my Touchpad.
When i'm running this program it starts very well but i can't get the menue.
So it's not possible to run one of the menue-points.
I use Windows 7 64bit, the TP is connected with USB-sign on.
My problem:
In the WebOs-log the last line shows a flash-failure.
When i'm starting the TP, first a static HP-logo comes up, followed from a rotating HP-logo,
the a screen changes from black to white with a grey button rotating.
Any idea?
Thanks!
Click to expand...
Click to collapse
Re-read the directions for TP Toolbox. You need to boot into WebOS recovery (a static usb symbol). It sounds like your TP is trying to boot into WebOS, not WebOS recovery.
A) Have novacom installed
To load TPToolbox, you will need novacom to be installed on your PC.
You can download and install novacom from http://www.openwebosproject.org/open.../packages.html
Or, you can download and run a java-based "universal installer" from http://code.google.com/p/universal-n...downloads/list
B) Put the Touchpad into webOS recovery mode and connect via USB cable to PC
NOTE: Even if webOS is removed, webOS recovery will still exist as it's built into the bootloader.
If you have moboot already installed, just select "webOS recovery" there.
Or, power the Touchpad off via webOS, then with the Touchpad is off, hold VolumeUp (closest to Power) and Power until you see the USB symbol.
Or, hold Power+Home until the screen changes (about 10 secs) and then start holding the VolumeUp button until you see the big USB symbol.
Click to expand...
Click to collapse
shumash said:
Re-read the directions for TP Toolbox. You need to boot into WebOS recovery (a static usb symbol). It sounds like your TP is trying to boot into WebOS, not WebOS recovery.
Click to expand...
Click to collapse
Thanks,
no it's in recovery mode i'm shure. A big usb symbol on the screen and some other lines.
I can then open the terminal-window and connect the Touchpad.
I add here pictures what happens when i type the commands "printenv" and "token".
When i type reboot, the TP starts correct to boot, first the static HP sign, then a greyed HP sign and then a screen (see the picture) with a grey rotating Button.
That's it.
issue loading TPTToolbox
Sorry folks - i am fairly new at this - and we all had to start at some point - so if this is obvious to most, i apologize.. but need a little help.
I cant seem to get the Toolbox to load, i downloaded it from the post,{as well as the Novacom driver} i have extracted the three files - when i open the .bat file i get the message below. I have the TouchPad connected via USB, and windows has assigned it a letter drive and I have the big USB icon on the pad screen
message:
"
Setting Palm path ...
Checking novacom service ...
Loading TPToolbox ...
.
Cannot connect to Touchpad.
Make sure Touchpad is connected with USB cable.
Make sure Touchpad is in webOS Recovery (bootie) mode
(where big USB symbol shows on Touchpad screen)
.
"
Toolbox
I'm not sure you understand the instructions on how to do the install.
Here is a link with instructions that I used for my install:
http://liliputing.com/2014/06/use-touchpad-toolbox-install-android-erase-webos-hp-touchpad.html
While the instructions are written for windows users, I used them for my Ubuntu Linux install and everything
worked perfectly.
Recovery problem when running toolbox
I've followed the instructions for running the Toolbox and have removed WebOS, setup the directory sizes and uploaded the ROM and GApps AND renamed the files as specified in the how-to.
However I am having issues with the recovery. The recovery I downloaded was update-CWM-jcs-dm-tenderloin-20140317.zip
I get the error that "No supported recovery file found. Aborting."
I've seen mention that the cable could be bad however if I have no files in the ttinstall directory, I get an error that there's no ROM. I upload the ROM and rename it and the error then is about the Recovery file so that means the ROM was in fact uploaded so the cable theory is moot.
I'm thinking the recovery file needs to be named something specific however when I have tried to use the file names listed as
Compatible Legacy ROM files:
cm-10.1-*-tenderloin.zip or
skz_tenderloin-2.11_jb_4.2.2-*.zip
Click to expand...
Click to collapse
but that doesn't work. Is the file name supposed to be something else?
(Sorry about asking this here. Tried to ask in Developer thread but I don't have enough posts)
chrisjpopp said:
I've followed the instructions for running the Toolbox and have removed WebOS, setup the directory sizes and uploaded the ROM and GApps AND renamed the files as specified in the how-to.
However I am having issues with the recovery. The recovery I downloaded was update-CWM-jcs-dm-tenderloin-20140317.zip
I get the error that "No supported recovery file found. Aborting."
I've seen mention that the cable could be bad however if I have no files in the ttinstall directory, I get an error that there's no ROM. I upload the ROM and rename it and the error then is about the Recovery file so that means the ROM was in fact uploaded so the cable theory is moot.
I'm thinking the recovery file needs to be named something specific however when I have tried to use the file names listed as
but that doesn't work. Is the file name supposed to be something else?
(Sorry about asking this here. Tried to ask in Developer thread but I don't have enough posts)
Click to expand...
Click to collapse
Try the update-TWRP-jcs-dm-tenderloin-20140512.zip instead. It worked just fine for me.
chrisjpopp said:
I've followed the instructions for running the Toolbox and have removed WebOS, setup the directory sizes and uploaded the ROM and GApps AND renamed the files as specified in the how-to.
......
(Sorry about asking this here. Tried to ask in Developer thread but I don't have enough posts)
Click to expand...
Click to collapse
How did you rename the file? I don't think you need to rename any file.
No matter how many times I reinstall novacom TPtoolbox will not get past
Checking Novacom services....
And goes no fauther.
I am running windows 8.1
HP Touchpad 4G - Issue running
[email protected] said:
The original TPtoolbox thread answers this 4G question as: http://forum.xda-developers.com/showpost.php?p=52923285&postcount=65
Click to expand...
Click to collapse
Good thing I didn't wipe webOS off! I'd have a nice frisbee. Hopefully these guru's will fix that issue and we can all be happy. Thanks JCSullins.
Greetings, developers and friends!
My Touchpad is now stuck in a continuous boot, with Android backed up in Clockworkmod but I tried restoring and didn't work. A couple of days ago I deleted info on my SD card because it was too bogged down and didn't let me update anything. I did my best but I decided to do this,so I own it. Attempted to flash with Roland's video instructions and got all my files in order: Problem is, on the command prompt I get a message of "Device Not Recognized.
Here's what I see when booting:
Moboot 0. 3. 8
HP logo
boot ClockworkMod
boot Cyanogenmod
boot WebOS
boot webOS Recovery
reboot
shutdown
Then the screen goes light dark, as if the animation of CyanogenMod is going to be up and running but it doesn't. Is there a remedy to fix the SD card problem, maybe that will take care of it and my laptop can see the TouchPad? Backup works fine on ClockworkMod, restore does too but nothing happens.
Any takers? I have another HP tablet that I will not mess with, but I'd rather have both running Android.
Thanks,
chicawhyte
chicawhyte said:
Greetings, developers and friends!
My Touchpad is now stuck in a continuous boot, with Android backed up in Clockworkmod but I tried restoring and didn't work. A couple of days ago I deleted info on my SD card because it was too bogged down and didn't let me update anything. I did my best but I decided to do this,so I own it. Attempted to flash with Roland's video instructions and got all my files in order: Problem is, on the command prompt I get a message of "Device Not Recognized.
Here's what I see when booting:
Moboot 0. 3. 8
HP logo
boot ClockworkMod
boot Cyanogenmod
boot WebOS
boot webOS Recovery
reboot
shutdown
Then the screen goes light dark, as if the animation of CyanogenMod is going to be up and running but it doesn't. Is there a remedy to fix the SD card problem, maybe that will take care of it and my laptop can see the TouchPad? Backup works fine on ClockworkMod, restore does too but nothing happens.
Any takers? I have another HP tablet that I will not mess with, but I'd rather have both running Android.
Thanks,
chicawhyte
Click to expand...
Click to collapse
UPDATE: Was able to get through the Android removal, but it bothers me that one of the scrolling messages says, "no cminstall dir found, nothing to install.
chicawhyte said:
UPDATE: Was able to get through the Android removal, but it bothers me that one of the scrolling messages says, "no cminstall dir found, nothing to install.
Click to expand...
Click to collapse
TouchPad toolbox will solve it.
Moody66 said:
TouchPad toolbox will solve it.
Click to expand...
Click to collapse
Where is the Toolbox? Looked in Preware, Just Type and everywhere else and I can't find it. Thanks.
Found it on another thread, printed it out. Will take care of this after work. Thanks.
chicawhyte
chicawhyte said:
Found it on another thread, printed it out. Will take care of this after work. Thanks.
chicawhyte
Click to expand...
Click to collapse
It didn't work....aborted.... :crying:
It didn't, it aborted. I tried Roland's way and attempted to flash it but still the message is the same, no cminstall dir, power off when ready. Let me see if I can get a hold of him or JC (it'd be incredibly lucky for me) I hope my tablet can get the Android back.
Roland asked me about this, this is my reply. Feel free to help out.
chicawhyte said:
It didn't, it aborted. I tried Roland's way and attempted to flash it but still the message is the same, no cminstall dir, power off when ready. Let me see if I can get a hold of him or JC (it'd be incredibly lucky for me) I hope my tablet can get the Android back.
Click to expand...
Click to collapse
+Roland Deschain Ok Roland, what I have tried was to gain more memory on my tablet; there were several apps deleted, cached space, did all I could because I had an update via Goo.im. I tried to flash it but I was not successful; asides from that, there were automatic updates that the Touchpad did not allow due to low storage space.That is when I made the serious mistake of deleting the SD card.
I tried to uninstall according to your instructions and then load up the 5M to go back to full throttle, but for whatever reason when the scroll happened the messages were off-key, meaning that folders and files were not installed and not the usual way. That's when I realized there was trouble; I had made two Nandroid backups that are still in the Touchpad. I had only WebOS and no Android to be seen. I restored the most recent backup via ROM Manager and I thought that that would do the trick, still no Android (?).
I decided to try and reach out to my fellows at XDA-Developers because I try everything before I go to the forum; I know the rules there. That's when I was made aware of the Toolbox by JC Sullins and I downloaded it. Followed the instructions hoping to install Android that way but it didn't go past 3 seconds of Step 1. That's when I get the message(s) that there's nothing to install and cuts off.
I am aware of a way to format the SD card (if that is the problem) but for that stuff I need specific instructions, like here, to do so. I have another TouchPad 32 GB that I performed a double-boot as you instructed us to do; what I need is some specific cause(s) and what to do because the idea of wiping everything including WebOS, using WebOS Doctor to reinstall it and then Android does not appeal to me. I want to get to the bottom of it, I like to figure this stuff out and do it myself
Thanks for your work and for helping us turn a good tablet into the best tablet around!
Greetings,
Please read below my message to Roland and my problem below/wanted to add that now on both computers (my laptop where I do the flashes) and my husband's where I copied the Palm, Inc. folder to attempt Android there-the message I get is that "there is no hardware found" on the command prompt.
Please try to follow the instructions and explain things when requested
chicawhyte said:
Hello Roland, help!!!!! Please read this thread and let me know if I have to wipe everything and restart from scratch with WebOS Doctor. Here's the thread from xda-developers: http://forum.xda-developers.com/hp-...r-boot-loops-deleted-sd-t2803190/post53886856. Runs WebOS fine, but no Android to be seen; files are there but it won't let me format the whole tablet. Thanks!
Click to expand...
Click to collapse
RolandDeschain79 said:
"Hey so I took a look but that just tells me you're confused and trying to follow multiple sets of instructions. Can you list what you've tried and where you get stuck. There's no cminstall folder in this set of instructions its a ttinstall folder. Did you complete the first steps of uninstalling android and wiping the USB drive?"
Click to expand...
Click to collapse
chicawhyte said:
+Roland Deschain Ok Roland, what I have tried was to gain more memory on my tablet; there were several apps deleted, cached space, did all I could because I had an update via Goo.im. I tried to flash it but I was not successful; asides from that, there were automatic updates that the Touchpad did not allow due to low storage space.That is when I made the serious mistake of deleting the SD card.
I tried to uninstall according to your instructions and then load up the 5M to go back to full throttle, but for whatever reason when the scroll happened the messages were off-key, meaning that folders and files were not installed and not the usual way. That's when I realized there was trouble; I had made two Nandroid backups that are still in the Touchpad. I had only WebOS and no Android to be seen. I restored the most recent backup via ROM Manager and I thought that that would do the trick, still no Android (?).
I decided to try and reach out to my fellows at XDA-Developers because I try everything before I go to the forum; I know the rules there. That's when I was made aware of the Toolbox by JC Sullins and I downloaded it. Followed the instructions hoping to install Android that way but it didn't go past 3 seconds of Step 1. That's when I get the message(s) that there's nothing to install and cuts off.
I am aware of a way to format the SD card (if that is the problem) but for that stuff I need specific instructions, like here, to do so. I have another TouchPad 32 GB that I performed a double-boot as you instructed us to do; what I need is some specific cause(s) and what to do because the idea of wiping everything including WebOS, using WebOS Doctor to reinstall it and then Android does not appeal to me. I want to get to the bottom of it, I like to figure this stuff out and do it myself
Thanks for your work and for helping us turn a good tablet into the best tablet around!
Click to expand...
Click to collapse
Please try and limit your conversation to one location. People who spam my YouTube channel and the forum with the same questions tend to get permanently banned without warning. Consider this a warning.
chicawhyte said:
......That is when I made the serious mistake of deleting the SD card.
.......I am aware of a way to format the SD card (if that is the problem) but for that stuff I need specific instructions, like here, to do so. I have another TouchPad 32 GB that I performed a double-boot as you instructed us to do; what I need is some specific cause(s) and what to do because the idea of wiping everything including WebOS, using WebOS Doctor to reinstall it and then Android does not appeal to me. I want to get to the bottom of it, I like to figure this stuff out and do it myself
Click to expand...
Click to collapse
Secondly if I ask you a question try to answer it as completely as possible. Don't tell me you made a mistake by wiping the SDcard then refuse to tell me how you did this even after I asked specifically about it. Claiming that you know how to wipe the SDcard then asking for specific instructions how to do so doesn't give me confidence in your ability. If you wiped the SDcard from a windows PC then you've made your own problem and completely ignored all the available instructions.
chicawhyte said:
. Followed the instructions hoping to install Android that way but it didn't go past 3 seconds of Step 1. That's when I get the message(s) that there's nothing to install and cuts off.
Click to expand...
Click to collapse
I'm having a very hard time understanding why you say you're stuck on step 1, which is installing novacom and backing up your data, when you're talking about step 5 installing android???
Step by step instructions have been provided and I even made a long video that reads you all the info. No one can help you to follow instructions that's up to you. Saying you didn't want to follow the instructions then asking for help is just silly. If you do not wish to change the layout of your touchpad just stick to the Non data media roms.
New Super Easy Way Guide and video available
[ROM GUIDE]How to use the TouchPad Toolbox to install Android "The Super Easy Way"(DM & Non-DM)
Hello;
I am very new here and was trying to repair my 16 GB HP TP via other JCS post and forums on youtube, rootzwiki etc. but no success get my touchpad repairs.
recently I found JCS new toolbox v41. and downloaded it. it looks very awesome and easy to use. Thanks JCS for making it easy for people with little tech background......
However, when I run new toolbox v41 on my tp. I got following errors.
1) When I tried to use complete data reset option I get following error
Error: Invalid partition info: end-gap greater than 1 percent of mmc
2) When I tried to use Create WebOS Volume option, It failed again with following error:
>>> Obtaining existing Volume size….
Determining volume size….
Problem w/ vgchange –ay
Error: volsize all failed rc=1
I downloaded CWM DM and Non DM ...and copy files on Palm, Inc. Folder and re-run the toolbox again...but got the same error as above.
can someone help, what should I do next? or if someone direct me which thread I should have to follow?
I had read many many thread on rootzwiki ..still no success yet.... thought HP toolbox v41 can assist me... but still need guidance..
mgul said:
Hello;
I am very new here and was trying to repair my 16 GB HP TP via other JCS post and forums on youtube, rootzwiki etc. but no success get my touchpad repairs.
recently I found JCS new toolbox v41. and downloaded it. it looks very awesome and easy to use. Thanks JCS for making it easy for people with little tech background......
However, when I run new toolbox v41 on my tp. I got following errors.
1) When I tried to use complete data reset option I get following error
Error: Invalid partition info: end-gap greater than 1 percent of mmc
2) When I tried to use Create WebOS Volume option, It failed again with following error:
>>> Obtaining existing Volume size….
Determining volume size….
Problem w/ vgchange –ay
Error: volsize all failed rc=1
I downloaded CWM DM and Non DM ...and copy files on Palm, Inc. Folder and re-run the toolbox again...but got the same error as above.
can someone help, what should I do next? or if someone direct me which thread I should have to follow?
I had read many many thread on rootzwiki ..still no success yet.... thought HP toolbox v41 can assist me... but still need guidance..
Click to expand...
Click to collapse
Have you tried v40? I think v41 is still under development.
saidiadude said:
Have you tried v40? I think v41 is still under development.
Click to expand...
Click to collapse
where can I find all the required files for v40.
Also where can I find ROM for latest working Andriod for TP.
2nd post in this thread: http://forum.xda-developers.com/showthread.php?t=2756314
saidiadude said:
2nd post in this thread: http://forum.xda-developers.com/showthread.php?t=2756314
Click to expand...
Click to collapse
Did you get this working? i'm getting the same errors and I've tried with both versions of TPToolbox but can't get anywhere
I'm just going to bump this. I'm having the same issue with v42. I soft bricked my TP and used TPdebrick to get it to boot again but now I'm having all sorts of issues with TPToolbox. I also think my partitions are hosed as /system and /data both show up as 0mb in TWRP.
Hi
Firstly, thank you in advance for any help you can give me. I'm completely new to this so apologies in advance for my clumsy terminology and probably lack of useful detail - obviously v happy to provide any other details that will help. I do appreciate you are all volunteers - I moved from Windows to Ubuntu a few years ago and really appreciated the community support which made it possible so I am well aware of how dedicated you all are - thank you in advance.
I've an old Moto G6 (Xt1925-5). I thought I'd try rooting it and then installing a custom rom to ensure I can update security etc.
I won't bore you with all the details of why - I don't actually need to succeed but I hate the fact that a functional phone is electronic junk after 2-3 years just because it won't update; so I thought I'd try with my old phone that I don't need to see how easy this is to do (if it is I'll move over to Android for my main phone - I reluctantly currently use an iPhone - for me the selling-your-sole-to-Apple is outweighed by the several years of useability such that I buy my iPhones 2nd hand and still get several years of secure phone use.
I did manage to install twrp, root it and then wiped the original OS in order to flash a new rom. It's OEM unlocked via code from Motorola.
The problem I now face is that whatever I try to flash gives me error 255 in twrp. I've tried many different roms mostly downloaded via links on this site - eg lineage 17 and 18, crDroid v7 (android 11), Pixelexperiance.
twrp is version 3.6.2_9-0. My PC is running Ubuntu 22.04LTS. The phone previously ran Android 9 as an upgrade from the OEM 8.
I'm attempting to do this by (1) downloading the .zip; (2) transferring over to the sd card using adb push via USB from my laptop; (3) install via twrp.
The file seems to go over to the sd card and twrp shows it and tries to install, then I get the error (seems to be 255 every time). I've also tried sending the .zip to /tmp and /sdcard - neither work: error 255 every time. If I check 'zip signature verification' most of the ROMs pass (one or two fail) but still gives error 255 when trying to install.
The text is 'Updating partition details ... done; Formatting Cache using make_ext4fs ... ; Updating partition details ... done; Wiping Cache & Dalvik ... -- Dalvik Cache Directories Wipe Complete!; Updating partition details ... done!; Installing zip file '/sdcard/lineage18...'; Unmounting system ...; Updater process ended with ERROR: 255 Error installing zip file '/sdcard/lijneage-18...'; Updating partition details... ... done
As I get the same error with multiple different OSs I suspect I've made a simple error somewhere but don't know where to start to find it.
As an aside - I don't know if this is normal or completely unrelated - the .zip files I move over seem to disappear from the phone sometimes - often if I reboot, but I can't reliably reproduce the disappearance - wiping cache etc. doesn't remove the files, rebooting sometimes seems to but not every time.
I don't really mind what OS I end up with - happy with any OS that is secure; but I suspect I've missed something really simple to give the the same error with every attempt. As I said at the beginning, this is mostly an experiment (and would be nice to have a backup phone!) so the actual OS I end up with is much less important than whether I can do it or not.
Any help greatly appreciated - thank you!
doctorwill said:
Any help greatly appreciated - thank you!
Click to expand...
Click to collapse
Hello and good morning, @doctorwill
Welcome to XDA! I hope you'll always find and get the support you require.
However. prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved the thread to
Moto G6 Questions & Answers
Ask your questions about the Moto G6 and get answers from the community! Please be as specific as possible when posting.
forum.xda-developers.com
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator