Related
Recently i bricked my phone and recovered by flashing .257(indian) stock ftf using flashtool. Now i dont have ota update for .245 firmware. How should i update my phone to .245 firmware? Is there any other way other than flashing stock .245 using flashtool?
phone status: stock .257(rooted and cwm enabled with locked bootloader)
Deepam7325 said:
Recently i bricked my phone and recovered by flashing .257(indian) stock ftf using flashtool. Now i dont have ota update for .245 firmware. How should i update my phone to .245 firmware? Is there any other way other than flashing stock .245 using flashtool?
phone status: stock .257(rooted and cwm enabled with locked bootloader)
Click to expand...
Click to collapse
flashing with flashtool is same as updating via PCC or SUS. Go for flashtool
Deepam7325 said:
Recently i bricked my phone and recovered by flashing .257(indian) stock ftf using flashtool. Now i dont have ota update for .245 firmware. How should i update my phone to .245 firmware? Is there any other way other than flashing stock .245 using flashtool?
phone status: stock .257(rooted and cwm enabled with locked bootloader)
Click to expand...
Click to collapse
installing by flashtool is fast,simple,neat ..+1 from me aswell go for it.
happy flashing.
Flashing with flashtool is the easiest way I feel, just keep in mind that YOUR INTERNAL SD CARD WILL BE WIPED!!
Sent from my C5303 using XDA Premium 4 mobile app
As I do if my phone is in bootloop and now the flashtool does not recognize my phone in flash mode?? The phone lights up green and all but the flashtool does not pass the message "connect your phone in flash mode", the flash never initiates, before right mind had flashed a kernel for root, but now with the bootloop this does nothing.
What I can do?
If u have the CWM Recovery (Tap Volume + in the first vibration) what u can do is go there and select:
- Shutdown your XSP
1. For flash using Flashtool ur phone have to be completely off
2. When Flashtool ask u "connect ur device" u have to press Volume - and connect ur USB. No before it ask u
3. Enjoy
Sent from my C5303 using xda app-developers app
esloded said:
As I do if my phone is in bootloop and now the flashtool does not recognize my phone in flash mode?? The phone lights up green and all but the flashtool does not pass the message "connect your phone in flash mode", the flash never initiates, before right mind had flashed a kernel for root, but now with the bootloop this does nothing.
What I can do?
Click to expand...
Click to collapse
Sometimes happen, small fix to it is restart your pc.
RuchRha said:
Sometimes happen, small fix to it is restart your pc.
Click to expand...
Click to collapse
Now it...
Code:
13/038/2013 00:38:41 - INFO - Start Flashing
13/038/2013 00:38:41 - INFO - Processing loader
13/038/2013 00:38:41 - INFO - Checking header
13/038/2013 00:38:41 - INFO - Ending flash session
13/038/2013 00:38:41 - ERROR - Error in processHeader : 1 : FunciĆ³n incorrecta.
13/038/2013 00:38:41 - ERROR - Error flashing. Aborted
I cant flash the rom, what is it??
I could do it, the problem was my computer and jjj drivers, install everything on another pc and everything went perfectly.
Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
ElwinHoTin said:
Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
Click to expand...
Click to collapse
Try to reflash 10.2.1.A.2.67 and make sure to check wipe is enabled
ElwinHoTin said:
Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
Click to expand...
Click to collapse
You can flash the latest kitkat ftf via flashtool.
The firmware can be rooted
androidtweaker1 said:
You can flash the latest kitkat ftf via flashtool.
The firmware can be rooted
Click to expand...
Click to collapse
I tried to flash in the kit kat firmware,
but I am still stuck in the bootloop...
How can I turn on my usb debug and third party source?
I think is that not allowing me to flash anything in....
ElwinHoTin said:
Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
Click to expand...
Click to collapse
I had the same problem , what I did was , i just flashed the old 4.3 FTF using flashtool which fixed it
Mr.KiLLeR said:
I had the same problem , what I did was , i just flashed the old 4.3 FTF using flashtool which fixed it
Click to expand...
Click to collapse
By old 4.3 ftf
Do you mean 10.4.1.B.0.101 ?
I am really new and I am noob
Sorry for bothering you guys...
ElwinHoTin said:
By old 4.3 ftf
Do you mean 10.4.1.B.0.101 ?
I am really new and I am noob
Sorry for bothering you guys...
Click to expand...
Click to collapse
Yes exactly ..
Mr.KiLLeR said:
Yes exactly ..
Click to expand...
Click to collapse
I am trying to download the C6603 10.4.1.B.0.101 Generic HK ftf
Which should be what I have in my phone originally
Is that the one I should use?
Or I can just flash in any 10.4.1.B.0.101 ftf?
ElwinHoTin said:
I am trying to download the C6603 10.4.1.B.0.101 Generic HK ftf
Which should be what I have in my phone originally
Is that the one I should use?
Or I can just flash in any 10.4.1.B.0.101 ftf?
Click to expand...
Click to collapse
any one dude.. dont worry
Mr.KiLLeR said:
any one dude.. dont worry
Click to expand...
Click to collapse
It worked
Thank you soooooo much
You have saved my life
ElwinHoTin said:
It worked
Thank you soooooo much
You have saved my life
Click to expand...
Click to collapse
Gr8 I am glad that I helped ENJOY :good:
Same problem
hplease help me.. its not orking when i reflash it with 4.3 (i already had)
Xperia z3 D6653
Ok so I was trying to flash my z3 back to original Sony software because I was getting an error message in PC companion saying my phone cannot be updated because it contains modified software and I was flashing it using sony mobile flasher by androxyde and I forgot to enable USB debugging and unknown sources and now it's in a boot loop telling me "software update failed. Please plug your phone back in and try again"
Any ideas?
I was told to try using a different computer?
Hi all, if anyone is having trouble flashing with flash tool because usb debugging isn't enabled error then do this procedure.......
1. Dowload latest flash tool 0.9.18.8 and also version 0.6.6
2. Try use the latest version first to Flash the tft rom. NOTE: remember the file it has error flashing e.g on my experia sp file system.sin was not able to Flash bcoz usb debugging error (enable usb debugging and unknown sources) ALL THE REST of the files flashed ok!
3.try flash again the rom but this time tick system.sin (or error file) in flashtool to exclude it from flashing. Make sure all other files are included. Also tick all wipe caches options and flash rom without system.sin (or error file).
4. Flash procedure will work. Now disconnect phone and leave it off without restarting it.
5. Uninstall flashtool latest version 0.9.18.8 and install flashtool 0.6.6 old version and open it to Flash the same rom BUT THIS TIME only select the system.sin file (or error file) to be flashed and rest excluded. Make sure all wipe options in flashtool are enabled and Flash! THE FLASH WILL WORK WITHOUT USB DEBUGGING ERROR and your phone will be fixed!
Press thanks if it helped!
After installing, I see the message "could not find SIM card"
Wifi does not work
Unlocked bootloader
Installed via CWM
Might try flashing latest radio via Flashtool.
WhiteNeo said:
Might try flashing latest radio via Flashtool.
Click to expand...
Click to collapse
Where can I get it ?
Download a latest firmware ftf for your phone and flash it via Flashtool.. Unckeck all but baseband before starting
i bricked my phone(C5302) because installing custom kernel,
then i flash stock again using flashtool and it boot again but now it keep saying "invalid card", :crying:
i checked using *#*#7378423#*#*,
open service info > sim lock, i got all the info value is 0
then i open configuration, i found out that "Bootloader unlock allowed : No" :crying:
i also use PC Companion and Sony Update Service but won't work for me
plz help me to fix this problem...... :crying:
THE KING of kings said:
i bricked my phone(C5302) because installing custom kernel,
then i flash stock again using flashtool and it boot again but now it keep saying "invalid card", :crying:
i checked using *#*#7378423#*#*,
open service info > sim lock, i got all the info value is 0
then i open configuration, i found out that "Bootloader unlock allowed : No" :crying:
i also use PC Companion and Sony Update Service but won't work for me
plz help me to fix this problem...... :crying:
Click to expand...
Click to collapse
Which gerion of ftf are you flashed? Where you downloaded from? Some ftf file is come with carrier locked.
THE KING of kings said:
i bricked my phone(C5302) because installing custom kernel,
then i flash stock again using flashtool and it boot again but now it keep saying "invalid card", :crying:
i checked using *#*#7378423#*#*,
open service info > sim lock, i got all the info value is 0
then i open configuration, i found out that "Bootloader unlock allowed : No" :crying:
i also use PC Companion and Sony Update Service but won't work for me
plz help me to fix this problem...... :crying:
Click to expand...
Click to collapse
Make sure your phone is fully charged (minimum recommended value 70%). Now follow these steps below :
1) Connect your phone in MTP (Media Transfer Port) mode with your PC.
2) Open PC Companion and wait phone to be detected, after detection go to update option and click Repair My Phone/Tablet.
3) Leave the device until repair finishes.
Another method :
1) Flash 4.1.2 firmware from here Xperia SP 4.1.2
2) Flash it via Flashtool.
3) Extract the Kernel.sin from the stock FTF file (Android 4.3) you previously have downloaded.
4) Open Flashtool (By Androxyde) and then open tools->sin editior and select Kernel.sin where ever you extracted it.
5) Click extract data and wait.
6) Once you get the kernel.elf file rename it to boot.img.
7) Flash it as kernel via Flashtool.
8) Now select the stock FTF (Android 4.3) you downloaded and then before flashing look into right side you'll see an exclude option box.
9) Exclude kernel.sin and flash the FTF.
Check and see if any of the above methods work for you.
Hit thanks if I helped you.
Tech N You said:
Make sure your phone is fully charged (minimum recommended value 70%). Now follow these steps below :
1) Connect your phone in MTP (Media Transfer Port) mode with your PC.
2) Open PC Companion and wait phone to be detected, after detection go to update option and click Repair My Phone/Tablet.
3) Leave the device until repair finishes.
Another method :
1) Flash 4.1.2 firmware from here Xperia SP 4.1.2
2) Flash it via Flashtool.
3) Extract the Kernel.sin from the stock FTF file (Android 4.3) you previously have downloaded.
4) Open Flashtool (By Androxyde) and then open tools->sin editior and select Kernel.sin where ever you extracted it.
5) Click extract data and wait.
6) Once you get the kernel.elf file rename it to boot.img.
7) Flash it as kernel via Flashtool.
8) Now select the stock FTF (Android 4.3) you downloaded and then before flashing look into right side you'll see an exclude option box.
9) Exclude kernel.sin and flash the FTF.
Check and see if any of the above methods work for you.
Hit thanks if I helped you.
Click to expand...
Click to collapse
Hi bro,
As you described here, is it possible to run 4.1 kernel on 4.3 without problems?
kelumsd said:
Hi bro,
As you described here, is it possible to run 4.1 kernel on 4.3 without problems?
Click to expand...
Click to collapse
Read carefully I never said him to switch his phone on.
I am saying do this procedure without turning the phone on.
Tech N You said:
Make sure your phone is fully charged (minimum recommended value 70%). Now follow these steps below :
1) Connect your phone in MTP (Media Transfer Port) mode with your PC.
2) Open PC Companion and wait phone to be detected, after detection go to update option and click Repair My Phone/Tablet.
3) Leave the device until repair finishes.
Another method :
1) Flash 4.1.2 firmware from here
2) Flash it via Flashtool.
3) Extract the Kernel.sin from the stock FTF file (Android 4.3) you previously have downloaded.
4) Open Flashtool (By Androxyde) and then open tools->sin editior and select Kernel.sin where ever you extracted it.
5) Click extract data and wait.
6) Once you get the kernel.elf file rename it to boot.img.
7) Flash it as kernel via Flashtool.
8) Now select the stock FTF (Android 4.3) you downloaded and then before flashing look into right side you'll see an exclude option box.
9) Exclude kernel.sin and flash the FTF.
Check and see if any of the above methods work for you.
Hit thanks if I helped you.
Click to expand...
Click to collapse
to flash boot.img fastboot mode is not working??????
kelumsd said:
Which gerion of ftf are you flashed? Where you downloaded from? Some ftf file is come with carrier locked.
Click to expand...
Click to collapse
(Xperia SP (C5302)_12.0.A.1.211_Customized IN 1272-1094 R6A) downloaded from xda forum....!!!!
THE KING of kings said:
(Xperia SP (C5302)_12.0.A.1.211_Customized IN 1272-1094 R6A) downloaded from xda forum....!!!!
Click to expand...
Click to collapse
Flash this latest update with Flashtool and feedback pls.... :good:
http://forum.xda-developers.com/xperia-sp/general/ftf-12-1-1-207-generic-au-xperia-sp-t2856432
THE KING of kings said:
(Xperia SP (C5302)_12.0.A.1.211_Customized IN 1272-1094 R6A) downloaded from xda forum....!!!!
Click to expand...
Click to collapse
I didn't say use fastboot mode. Use Flashtool
Tech N You said:
I didn't say use fastboot mode. Use Flashtool
Click to expand...
Click to collapse
how to use flashtool to flash boot.img ????
Usee tool called universal AIO flasher download it from xda oor use Rashr from play store. I'll not be responsible for your dead device if anything happens.
Sent from my C5302 using XDA Free mobile app
Tech N You said:
Usee tool called universal AIO flasher download it from xda oor use Rashr from play store. I'll not be responsible for your dead device if anything happens.
Sent from my C5302 using XDA Free mobile app
Click to expand...
Click to collapse
your method won't work for me the problem is not fixed
it again shows the same invalid card
THE KING of kings said:
your method won't work for me the problem is not fixed
it again shows the same invalid card
Click to expand...
Click to collapse
Search for baseband fix on forum for xsp you'll get it. try that
do you have backup of your TA partition? try restoring it
it's same problem with my friend,so i hope to get fix solution in this problem
sorry my english is very very bad
not good ideas
It's same problem, my device is sony xperia c5302
I'm used this tutorial from xda fix baseband not work
Please http://forum.xda-developers.com/xperia-sp/general/how-to-fix-network-baseband-missing-imei-t2865378
My device is invalid card
Please help me...
I would suggest flashing the baseband from Flashtool.
For Flashable Zips, you may want to flash the ones I made here:
http://forum.xda-developers.com/xperia-sp/general/stock-components-flashable-zips-t3184111
Edit: Sorry, it seemed my files are inaccessible
Newer edit: The files are up again
any solution for this problem?
i have the same.
my pc isnt recognising my xperia c5306 im stuck at the bootloader tried updating drivers but doesnt work
please help me
hi guyz..
i have flashed cm 12.1 official along with modem files zip. mobile shows no sim inserted.
so i decided to go back to stock rom. even after flashing stock ftf file still no sim is detected. i came to know that i need to flash baseband from ftf but im not able to find anything related to baseband in ftf file. someone plzz help..:crying:
imran4848 said:
hi guyz..
i have flashed cm 12.1 official along with modem files zip. mobile shows no sim inserted.
so i decided to go back to stock rom. even after flashing stock ftf file still no sim is detected. i came to know that i need to flash baseband from ftf but im not able to find anything related to baseband in ftf file. someone plzz help..:crying:
Click to expand...
Click to collapse
Flash latest ftf of your revelent version then start fresh, wipe everything.!
kathanpatel1001 said:
Flash latest ftf of your revelent version then start fresh, wipe everything.!
Click to expand...
Click to collapse
tried. didnt work.
also tried software repair using pc companion.
imran4848 said:
tried. didnt work.
also tried software repair using pc companion.
Click to expand...
Click to collapse
Try to search for modem for c6902 and flash that.
gauravbhakuni90 said:
Try to search for modem for c6902 and flash that.
Click to expand...
Click to collapse
zip or ftf? already tried zip. didnt work. could not find ftf. plz provide link for ftf
imran4848 said:
zip or ftf? already tried zip. didnt work. could not find ftf. plz provide link for ftf
Click to expand...
Click to collapse
Zip file. Try searching Jaguar rom for z1 and in that thread go to download section and download c6902 modem files. Works everytime for me. And do thank the Dev in that thread.
gauravbhakuni90 said:
Zip file. Try searching Jaguar rom for z1 and in that thread go to download section and download c6902 modem files. Works everytime for me. And do thank the Dev in that thread.
Click to expand...
Click to collapse
tried sir...no change. I'm going nuts
imran4848 said:
tried sir...no change. I'm going nuts
Click to expand...
Click to collapse
Tried it from the same source I cited??
Which ROM are you on??
Edit - do you have ftf and flashtool installed??
gauravbhakuni90 said:
Tried it from the same source I cited??
Which ROM are you on??
Edit - do you have ftf and flashtool installed??
Click to expand...
Click to collapse
At present I'm on sony's latest firmware 5.1.1 . I flashed a pre rooted firmware downloaded form a xda thread(.236 build) I downloaded modem zip from the same source u mentioned sir and flashed in recovery. but there is no change:crying: I have flashtool installed in my pc and i even downloaded latest ftf from flashtool using xperiafirm and flashed it. but didnt solve problem
imran4848 said:
At present I'm on sony's latest firmware 5.1.1 . I flashed a pre rooted firmware downloaded form a xda thread(.236 build) I downloaded modem zip from the same source u mentioned sir and flashed in recovery. but there is no change:crying: I have flashtool installed in my pc and i even downloaded latest ftf from flashtool using xperiafirm and flashed it. but didnt solve problem
Click to expand...
Click to collapse
Do you have stock ftf file and flashtool installed ??
Bootloader unlocked ??
And please don't call me sir , I am no knight .
gauravbhakuni90 said:
Do you have stock ftf file and flashtool installed ??
Bootloader unlocked ??
And please don't call me sir , I am no knight .
Click to expand...
Click to collapse
I have bootloader unlocked. I have flashtool installed in my pc and using flashtool I flashed stock ftf file.
I didnt get you regarding ftf and flashtool installed? In my pc or Z1??
imran4848 said:
I have bootloader unlocked. I have flashtool installed in my pc and using flashtool I flashed stock ftf file.
I didnt get you regarding ftf and flashtool installed? In my pc or Z1??
Click to expand...
Click to collapse
But you said you flashed pre rooted firmware from recovery.
Clean flash stock ftf file from flashtool in flash mode then report.
gauravbhakuni90 said:
But you said you flashed pre rooted firmware from recovery.
Clean flash stock ftf file from flashtool in flash mode then report.
Click to expand...
Click to collapse
I have already tried that. At present Im on pre rooted firmware
imran4848 said:
I have already tried that. At present Im on pre rooted firmware
Click to expand...
Click to collapse
What options are you choosing to flash in flashtool. Select wipe all and don't exclude anything in flashtool. Try that.
gauravbhakuni90 said:
What options are you choosing to flash in flashtool. Select wipe all and don't exclude anything in flashtool. Try that.
Click to expand...
Click to collapse
Flashed in that manner only. Wiping all and not excluding anything.
I have a doubt. There is nothing related to 'Baseband' in contents list or in exclude?
I read somewhere that i need to flash baseband from ftf in order to fix. Is it true?
imran4848 said:
Flashed in that manner only. Wiping all and not excluding anything.
I have a doubt. There is nothing related to 'Baseband' in contents list or in exclude?
I read somewhere that i need to flash baseband from ftf in order to fix. Is it true?
Click to expand...
Click to collapse
When you are flashing the whole ftf. You are flashing the baseband too.
gauravbhakuni90 said:
When you are flashing the whole ftf. You are flashing the baseband too.
Click to expand...
Click to collapse
what am I supposed to do now??
I tried flashing this file http://forum.xda-developers.com/attachment.php?attachmentid=2564631&d=1391783645
but didnt fix. I am losing my imei after flashing this
imran4848 said:
what am I supposed to do now??
I tried flashing this file http://forum.xda-developers.com/attachment.php?attachmentid=2564631&d=1391783645
but didnt fix. I am losing my imei after flashing this
Click to expand...
Click to collapse
I don't know. If I were you I would clean flash the rom from flashtool not from recovery.
gauravbhakuni90 said:
I don't know. If I were you I would clean flash the rom from flashtool not from recovery.
Click to expand...
Click to collapse
I did clean flash rom from flashtool . but it didnt fix
Bro all you need is a sony flashtool, sony pc companion, your z1, and some patience.
first of all make a ftf of original firmware for you device this might help second step flash the ftf which you made using flashtool (remember this ftf is the orignal copy of stock firmware).
after flash process finished just simply turn on your device and this might get back your modem's and signal and yes your imei number as how it should be.