[HELP] Galaxy S i9000 Can't boot / No Recovery Mode - Galaxy S I9000 Q&A, Help & Troubleshooting

well i have a galaxy s i9000 i just flashed a stock rom using odin and it just can't boot it keeps rebooting and there's no recovery mode only download mode tried to flash the rom again : same problem the phone just can't reboot help ! :crying:

Walid Rouabhi said:
well i have a galaxy s i9000 i just flashed a stock rom using odin and it just can't boot it keeps rebooting and there's no recovery mode only download mode tried to flash the rom again : same problem the phone just can't reboot help ! :crying:
Click to expand...
Click to collapse
try following this or look in My Android Solutions, link below for solution
Check this out! Links to useful Guides and " Banned " Documentaries ​

Related

[Q] m190s problem

i got m190s dead after repair boot with riff box and flash with latest version: M190S_GINGER_HOME-IMAGE_REV03_WD19-1724_USER.tar
i got this problem: http://forum.xda-developers.com/showthread.php?t=2186081 HW: not active
i flash phone with Tegrak-Kernel-Build-38-for-M190S-WD19.tar but not succsess
so i use m190s pit file to flash phone again and now can't get phone out of recovery with thos errors :
can't mount /dev/stl11
can't mount cache:recovery/command
please help how to revive this phone again
sorry for my poor english
help pls
hi,my problem was solved after reserrect boot and recovery zone with riff.
but my problem now,can't call no network and allways i have on sreen this:
HW: not active
BOOT: SHW-190S.EA26.2034
PDA: SHW-M190S.EA26.2034
Phone: M190S.EA24.1212.ST
i tried to flash this phone with tegar kernel but always odin fail
and odin stuck at zimage and finaly give me (fail)
phone was working fine b 4 i try to flash
any idea???
elghandor said:
i tried to flash this phone with tegar kernel but always odin fail
and odin stuck at zimage and finaly give me (fail)
phone was working fine b 4 i try to flash
any idea???
Click to expand...
Click to collapse
you need to use the correct version of the kernel as per the ROM you have on your device look in How to Root and Flash Galaxy S Hoppin ( SHW M190S )
Check this out! Links to useful Guides and " Banned " Documentaries ​
xsenman said:
you need to use the correct version of the kernel as per the ROM you have on your device look in How to Root and Flash Galaxy S Hoppin ( SHW M190S )
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
thnx for yr care
i tried both kernel
Tegrak VG12
Tegrak WD19
but odin give me error too
my phone just stuck at anycall logo
now iam tryingto download this ver and flash to the phone ( VG12)
or u can give me first step to start from it
thnx again sir
i tried to flash with these ver. too
M190S-FROYO-HOME-IMAGE-REV03-EA26-2034-USER.tar
SHW-M190S VG12
SHW-M190S VH04
SHW-M190S WD19
and on my way to try SHW-M190S WC16
will post result here..............
i tried with (M190S_GINGER_HOME-IMAGE_REV03_WC16-1527_USER.tar.md5)
and
(M190S-FROYO-HOME-IMAGE-REV03-EA26-2034-USER.tar.md5)
but no success
any help
plz

[Q] Boot Loop and not accessible to recovery mode on galaxy ace(s5830)

I Have a galaxy ace(S5830). I had touchwiz revolutionised rom and i tried to flash psn kerne in it.
when i flashed it ,it got stuck in a boot loop and dint go to recovery mode.
than i tried to flash cwm kernel using odin ,it dint boot , no recovery mode, no download mode and i couldn't charge it. than today morning when i saw i was able to go to download mode but not to recovery mode.so i flashed a stock firmware using odin.
Now there is a boot loop and it doesn't go to recovery mode but i can access download mode.
In short:
I am not able to access recovery mode and there is a boot loop.
How should fix this problem ?
PLEASE HELP ME.
I remember that someone upload CWM package that you can flash throw odin, try this.
Kung Fu monkey said:
I Have a galaxy ace(S5830). I had touchwiz revolutionised rom and i tried to flash psn kerne in it.
when i flashed it ,it got stuck in a boot loop and dint go to recovery mode.
than i tried to flash cwm kernel using odin ,it dint boot , no recovery mode, no download mode and i couldn't charge it. than today morning when i saw i was able to go to download mode but not to recovery mode.so i flashed a stock firmware using odin.
Now there is a boot loop and it doesn't go to recovery mode but i can access download mode.
In short:
I am not able to access recovery mode and there is a boot loop.
How should fix this problem ?
PLEASE HELP ME.
Click to expand...
Click to collapse
Did you try using the keys? By pressing & holding Power Button & Center Button (Home) simultaneously which will take you to Recovery Mode.
When i got a Boot loop earlier, this is what i tried & succeeded.
hi..
I got same problem
And i flush stock rom of ddlj1 frimware version I have suceed so i recommend u to flush ddlj1 frimware through odin.
hit thanks if i helped
Sent from my GT-S6102 using Tapatalk 2
Thanks but I got it fixed.
I flashed a stock firmware it had 4 files in it.
But I still can't go to recovery mode.when I tried the butron combination it say some ramdump mode.
Sent from my GT-I9500
Lalonde helmysis
After flashing, can you turn on the phone normally?
Kung Fu monkey said:
I Have a galaxy ace(S5830). I had touchwiz revolutionised rom and i tried to flash psn kerne in it.
when i flashed it ,it got stuck in a boot loop and dint go to recovery mode.
than i tried to flash cwm kernel using odin ,it dint boot , no recovery mode, no download mode and i couldn't charge it. than today morning when i saw i was able to go to download mode but not to recovery mode.so i flashed a stock firmware using odin.
Now there is a boot loop and it doesn't go to recovery mode but i can access download mode.
In short:
I am not able to access recovery mode and there is a boot loop.
How should fix this problem ?
PLEASE HELP ME.
Click to expand...
Click to collapse
For your Bad Luck , this ain't ACE-s5830 section..this is ACE-S5830i .......... ACE S5830i is entirely different from galaxy ACE s5830....Now, i will try to get it moved to ACE-S5830 section so that you will get your Answer........
thank you,
P.007
Hey Dude,
I tell u the simple way.
Download the official firmware from samfirmware website and Flash the mobile using odin.
Your cell looks like the NEW.
Thanks but i already fixed it
Kernelizer said:
For your Bad Luck , this ain't ACE-s5830 section..this is ACE-S5830i .......... ACE S5830i is entirely different from galaxy ACE s5830....Now, i will try to get it moved to ACE-S5830 section so that you will get your Answer........
thank you,
P.007
Click to expand...
Click to collapse
Sorry.
Kernelizer said:
For your Bad Luck , this ain't ACE-s5830 section..this is ACE-S5830i .......... ACE S5830i is entirely different from galaxy ACE s5830....Now, i will try to get it moved to ACE-S5830 section so that you will get your Answer........
thank you,
P.007
Click to expand...
Click to collapse
And Thanks
_FroX_ said:
I remember that someone upload CWM package that you can flash throw odin, try this.
Click to expand...
Click to collapse
sorry, but odin can't read zip files, it only reads tar files.....
my galaxy y duos got stuck in the boot loop while installing custom rom and now it is nt allowing me to get into recovery mode also followed by a
a boot loop.......pls help ..........
thank you.....
bond.007 said:
sorry, but odin can't read zip files, it only reads tar files.....
my galaxy y duos got stuck in the boot loop while installing custom rom and now it is nt allowing me to get into recovery mode also followed by a
a boot loop.......pls help ..........
thank you.....
Click to expand...
Click to collapse
ask your question in the right section and you will get help
Similar problem, please post solution
Kung Fu monkey said:
Thanks but i already fixed it
Click to expand...
Click to collapse
Hello!
I'm having similar problem with my galaxy tab.
Can you please describe the procedure you followed to make it work back again?
Thanks a lot.
Renan
renancarlos said:
Hello!
I'm having similar problem with my galaxy tab.
Can you please describe the procedure you followed to make it work back again?
Thanks a lot.
Renan
Click to expand...
Click to collapse
Which galaxy tab are you using?
Viper The Ripper said:
Which galaxy tab are you using?
Click to expand...
Click to collapse
Galaxy Tab 8.9" P7300 3G+WiFi
renancarlos said:
Galaxy Tab 8.9" P7300 3G+WiFi
Click to expand...
Click to collapse
First of all here it's your section you'll find here tons of info, guides, stock firmware references, custom roms...
forum.xda-developers.com/galaxy-tab-8-9
forum.xda-developers.com/showthread.php?t=1406137
forum.xda-developers.com/galaxy-tab-8-9/development
and then look at this
androidromupdate.com/2012/12/13/install-upgrade-samsung-galaxy-tab-8-9-gt-p7300-to-official-android-4-0-4-ice-cream-sandwich-p7300xxlq6/
Viper The Ripper said:
First of all here it's your section you'll find here tons of info, guides, stock firmware references, custom roms...
forum.xda-developers.com/galaxy-tab-8-9
forum.xda-developers.com/showthread.php?t=1406137
forum.xda-developers.com/galaxy-tab-8-9/development
and then look at this
androidromupdate.com/2012/12/13/install-upgrade-samsung-galaxy-tab-8-9-gt-p7300-to-official-android-4-0-4-ice-cream-sandwich-p7300xxlq6/
Click to expand...
Click to collapse
I have tried this toolkit, it seems fine, but I still can't get improvements flashing a new recovery (cwm or stock).
And the firmware links are all out because the hotfile service is out, so I can't get any download for a flashable ROM through ODIN.

[Q] How to flash Jelly Bean on Samsung Galaxy S/SHW-M110S ?

Hello everyone ,
I own a Samsung Galaxy S/SHW-M110S which is rooted with tegrak kernel . I want to install Jelly Bean 4.2.1 ROM on my device but I don't know how to perform it coz I'm new here in this thread and I don't have any idea about flashing , ROMS and all .
I viewed some of the threads on flashing Jelly Bean on my device and I tried all those but none of them worked . I have 2.3.6 android version . Please explain me in detail so I can flash my device with Jelly Bean .
What are the things I need ?
Is tegrak kernal ROM fine for flashing Jelly Bean or should I change it ?
Your comments will be much appreciated !
Thank you !
RaulST said:
Is tegrak kernal ROM fine for flashing Jelly Bean or should I change it ?
Your comments will be much appreciated !
Thank you !
Click to expand...
Click to collapse
go here or click PIT STOP link below for guide
Not working
xsenman said:
go here or click PIT STOP link below for guide
Click to expand...
Click to collapse
Hey , I downloaded all the required files and when I I tried to flash CWM recovery on my Phone , it didn't work . I did the procedure as you said and odin says successful but my samsung galaxy shw-m110s gets stuck at the loading screen . I waited for 10 minutes and it got stuck in the loading screen . I had to re-flash with tegrak kernel and its working again but can't flash to CWM recovery on my phone and can't upgrade to jelly bean
What's wrong ? Please explain it to me in detail please .
RaulST said:
Hey , I downloaded all the required files and when I I tried to flash CWM recovery on my Phone , it didn't work . I did the procedure as you said and odin says successful but my samsung galaxy shw-m110s gets stuck at the loading screen . I waited for 10 minutes and it got stuck in the loading screen . I had to re-flash with tegrak kernel and its working again but can't flash to CWM recovery on my phone and can't upgrade to jelly bean
What's wrong ? Please explain it to me in detail please .
Click to expand...
Click to collapse
The procedure has been explained as clearly as possible on the guide so please read it carefully and follow it to the dot...as the steps has been tested and never failed only the Jelly Bean ROM is not fully stable and you will not have ringtone.
is it possible you are trying to power on the phone after flashing CWM? if so, you need to enter CWM using the keys to enter recovery mode not by using the power button.
is it possible you are trying to power on the phone after flashing CWM? if so, you need to enter CWM using the keys to enter recovery mode not by using the power button.
Yeah , finally I flashed my phone . Yes my mistake was I was using power button instead of using recovery buttons :laugh:
Now finally able to use jellybean , thank you so much ! Much appreciated !
Thank you .
hello
the download link for the 4.2.1 rom seems not working anymore.can anyone provide an alternative download link?thanks

[Q] GT-I9001 Booting in Download mode only

Hello Friends,
I tried to install Clockworkmod recovery on Samsung Galaxy S Plus (GT-I9001) but it was NOT installed properly and afterwards my phone is not booting.
After this I have
1. Tried to Un-Brick device and followed link below
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Un-Brick_the_device
But it did not worked in my case.
2. Also I have tried to install Stock ROM and followed
http://forum.xda-developers.com/showthread.php?t=1346245.
I installed it using ODIN v4.43 and it was Pass by ODIN but even after this Phone is not booting .
I am able to go in Download mode.
Please suggest me How can install ROM using ODIN v4.43 or Please suggest me any other good alternative.
ketansb said:
Please suggest me How can install ROM using ODIN v4.43 or Please suggest me any other good alternative.
Click to expand...
Click to collapse
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Look in My Android Solutions l& My Android Collections, link below for all other solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.​
It worked !!!!
xsenman said:
Problem:- i9001 Bootloops after flashing CWM recovery
Solution:- Flash i9001 Boot.tar with AriesVe.ops in Odin 4.43
Look in My Android Solutions l& My Android Collections, link below for all other solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Click to expand...
Click to collapse
Whoooo !!!! It worked . Thanx a lot.
Just adding a tip " If anybody has same problem Please select Boot and browse for Boot.tar in ODIN 4.3v. Do NOT select One package option
Read the I9001 wiki next time.. This issue has been posted and fixed a very long time ago and the solution has been posted there aswel..
ketansb said:
Whoooo !!!! It worked . Thanx a lot.
Click to expand...
Click to collapse
When your problem has been solved, EDIT your first post and remove [Q] and add [Solved]
This will help others in their search and ensure that you don't need help from anyone any-more.
Check this out! You , YES! you are an " Android ". Not your phone but U.​

[Q] stuck at recovering error (solved)

hello,
i made a stupid mistake with flashing a rom with my i9001
i "flashed" the rom at update with zip file instead of using odin.
the problem is that i cant use odin or kies (usb debugging proberbly is of).
cant get in the rom aswell.
i still have the standard recovery but the phone is unrooted!
could some one give me a solution, coz im stuck!
thanks in advance
thesmith said:
hello,
i made a stupid mistake with flashing a rom with my i9001
i "flashed" the rom at update with zip file instead of using odin.
the problem is that i cant use odin or kies (usb debugging proberbly is of).
cant get in the rom aswell.
i still have the standard recovery but the phone is unrooted!
could some one give me a solution, coz im stuck!
thanks in advance
Click to expand...
Click to collapse
Download an i9001 CWM recovery, rename it as update.zip and flash using you 3e recovery, after that do not reboot but enter CWM recovery and try install a i9000 Custom ROM ( follow full flashing guide given by developer)
Check this out! Links to useful Guides and " Banned " Documentaries ​
But is this possible without being able to put the zip file of the cwm recovery into the internal memory of the phone?
thesmith said:
But is this possible without being able to put the zip file of the cwm recovery into the internal memory of the phone?
Click to expand...
Click to collapse
sorry about that, my lack of thought, anyway the solution would be to get download mode, which can be done by using a USB JIG, either that or you have to use JTAG to flash direct to the board when download mode becomes impossible.
But First, why can't you get download mode? have you tried any of the options mentioned in MY Android Solutins, link below...since you say you have recovery mode, download mode should be good to go?. if its working, just follow the i9001 flashing guide mentioned in My Android solutions to flash a gingerbread ROM using Odin 4.43 with AriesVe.ops
Check this out! Links to useful Guides and " Banned " Documentaries ​
Booting in download mode on the phone is not a problem, the problem is that my pc doesn't reconize the phone (kies and odin)
thesmith said:
Booting in download mode on the phone is not a problem, the problem is that my pc doesn't reconize the phone (kies and odin)
Click to expand...
Click to collapse
, the solution for that is also mentioned in My Android solutions , its a sticky thread , just above this thread or follow this
Check this out! Links to useful Guides and " Banned " Documentaries ​
csc shows unknown in my sII i9100g. can i flash a custom rom without any problem? like sony mobile if i flash 4.3 rom should i flash a kernel for particular rom?pls clarify.thanx in adv.
Sent from my GT-I9100G using xda premium
i don't know what solution i need to do, when my phone is stuck at the samsung logo (for booting normaly, with samsung flashing in blue).
when i plug in the USB at that nmoment and start kies, kies says that i need to put the debuging usb option on, i can't do this because i can't get in the ROM.
what do i need to do??
__________________________________________________________________________________________________________
EDIT:: i managed to install a CWM into the phone now i've got a new problem, it always boots into the CWM, how can i boot in the rom?
____________________________________________________________
Edit:: problem resolved needed another cwm.

Categories

Resources