Hello everyone ,
I own a Samsung Galaxy S/SHW-M110S which is rooted with tegrak kernel . I want to install Jelly Bean 4.2.1 ROM on my device but I don't know how to perform it coz I'm new here in this thread and I don't have any idea about flashing , ROMS and all .
I viewed some of the threads on flashing Jelly Bean on my device and I tried all those but none of them worked . I have 2.3.6 android version . Please explain me in detail so I can flash my device with Jelly Bean .
What are the things I need ?
Is tegrak kernal ROM fine for flashing Jelly Bean or should I change it ?
Your comments will be much appreciated !
Thank you !
RaulST said:
Is tegrak kernal ROM fine for flashing Jelly Bean or should I change it ?
Your comments will be much appreciated !
Thank you !
Click to expand...
Click to collapse
go here or click PIT STOP link below for guide
Not working
xsenman said:
go here or click PIT STOP link below for guide
Click to expand...
Click to collapse
Hey , I downloaded all the required files and when I I tried to flash CWM recovery on my Phone , it didn't work . I did the procedure as you said and odin says successful but my samsung galaxy shw-m110s gets stuck at the loading screen . I waited for 10 minutes and it got stuck in the loading screen . I had to re-flash with tegrak kernel and its working again but can't flash to CWM recovery on my phone and can't upgrade to jelly bean
What's wrong ? Please explain it to me in detail please .
RaulST said:
Hey , I downloaded all the required files and when I I tried to flash CWM recovery on my Phone , it didn't work . I did the procedure as you said and odin says successful but my samsung galaxy shw-m110s gets stuck at the loading screen . I waited for 10 minutes and it got stuck in the loading screen . I had to re-flash with tegrak kernel and its working again but can't flash to CWM recovery on my phone and can't upgrade to jelly bean
What's wrong ? Please explain it to me in detail please .
Click to expand...
Click to collapse
The procedure has been explained as clearly as possible on the guide so please read it carefully and follow it to the dot...as the steps has been tested and never failed only the Jelly Bean ROM is not fully stable and you will not have ringtone.
is it possible you are trying to power on the phone after flashing CWM? if so, you need to enter CWM using the keys to enter recovery mode not by using the power button.
is it possible you are trying to power on the phone after flashing CWM? if so, you need to enter CWM using the keys to enter recovery mode not by using the power button.
Yeah , finally I flashed my phone . Yes my mistake was I was using power button instead of using recovery buttons :laugh:
Now finally able to use jellybean , thank you so much ! Much appreciated !
Thank you .
hello
the download link for the 4.2.1 rom seems not working anymore.can anyone provide an alternative download link?thanks
Related
Hi guys, today I tried to install Jelly Bean from AOKP over my ICS from Team Nyx, but I got stock .... I can only access to download mode, but not to CWM .... I already tried to flash GINGERBREAD XXJVU via Odin but did not work, I also tried to reset the device with JV9_JV9_JV5 but also did not work ... is there any way to flash CWM or reset the phone from Odin ??..
Thanks !!
The only way to reset through ODIN is by flashing a rom. So keep trying.
Go into download mode & flash a gb stock rom with odin.
Then turn off phone go into download mode again and flash your cf root.
search for it here:
http://forum.xda-developers.com/showthread.php?t=788108
Done doing that turn on phone and u Will see cwm icon click it and reboot into recovery. Full wipe
& Flash the jb rom of your choice u may have 2 do it twice
Thanks for your answer guys ! I finally made it work with a Froyo 2.2 ROM I9000UGJK3 .... I´m wondering how do I know which Gingerbread version is compatible to my GT I9000M phone ..... I have seen lot of ROMs, but none says work in Mexico .... Do you know how I can know this ?? Thanks !
Try I9000UGKG3
http://forum.xda-developers.com/showthread.php?t=1102881
I am newer on samsung phone,,,, i was update my phone using JB frimware
now my phone hangs on samsung logo (i cant enter recovery mode,,, but download mode still oke)
try flashing many times with other JB stock roms but problem still same
i cant enter recovery mode,,, but download mode still oke
my custom binary domwload ; yes (115 count)
how to repair my phone????
i want to flash karnel but dont know exactly step by step?
i am tryng to downgrade to GB with tutorial on this forum but always says error (unable to pit partition)
THANKS for reply n your help....
l_m_husni said:
I am newer on samsung phone,,,, i was update my phone using JB frimware
now my phone hangs on samsung logo (i cant enter recovery mode,,, but download mode still oke)
try flashing many times with other JB stock roms but problem still same
i cant enter recovery mode,,, but download mode still oke
my custom binary domwload ; yes (115 count)
how to repair my phone????
i want to flash karnel but dont know exactly step by step?
i am tryng to downgrade to GB with tutorial on this forum but always says error (unable to pit partition)
THANKS for reply n your help....
Click to expand...
Click to collapse
Maybe the downloaded file is corrupted..Try flashing another baseband FW and check it.
For flashing kernels theres a SAFE AND FREE app
http://dl.xda-developers.com/attachdl/bca6a9b5a73472139b21ff4f2d7b4722/51a03873/1/9/0/2/9/3/1/Universal_Kernel_Flash_Tool_110.apk
Install this app and open it
Select the md5 or bin files from it and flash them and restart.
There you go...its done
I dont know about downgrading to GB..never tried and not gonna try it
MY JB is awesome:highfive:
narutosri said:
Maybe the downloaded file is corrupted..Try flashing another baseband FW and check it.
For flashing kernels theres a SAFE AND FREE app
http://dl.xda-developers.com/attachdl/bca6a9b5a73472139b21ff4f2d7b4722/51a03873/1/9/0/2/9/3/1/Universal_Kernel_Flash_Tool_110.apk
Install this app and open it
Select the md5 or bin files from it and flash them and restart.
There you go...its done
I dont know about downgrading to GB..never tried and not gonna try it
MY JB is awesome:highfive:
Click to expand...
Click to collapse
thanks for reply,,,
look my binary count (115) i was flashing with many different frimware
can you guide me step by step for repairing recovery mode????
THANKS
You can't enter recovery after flashing original fw via odin? Try taking out battery, put it back in and force recovery. Press it for a long time till it enter recovery. Then factory reset. I encountered this once on galaxy ace, endless bootloop and can't enter recovery but download is okay. Then I pressed the buttton until it somehow got into recovery. I don't know if this works but you can try though.
l_m_husni said:
thanks for reply,,,
look my binary count (115) i was flashing with many different frimware
can you guide me step by step for repairing recovery mode????
THANKS
Click to expand...
Click to collapse
We do not have any JB custom kernel that is flahsable with Odin. So I suppose you flashed GB custom kernel on JB, that is your problem. Flash whole STOCK JB FW again. After that use ONLY JB kernels. CoCore 6.x for example. Only one not abandoned from updates for now.
Do this again with JB, step by step: http://forum.xda-developers.com/showthread.php?t=2086965
And kernel: http://forum.xda-developers.com/showthread.php?t=2140597
Unzip it, put it on SD card, install Frapeti's universal kernel flasher. Install some ROOT explorer, this app needs it to work. Use it to install kernel.
Study content of this thread for future use: http://forum.xda-developers.com/showthread.php?t=2094318
hello , i installed a custom rom on my device ( gt-n7000) and after sometime i wanted to go back to my original firmware and i installed it via odin
but now when i turn on my device it is stuck on loading screen it shows me the samsung logo . I still can go to download mode but i don't know what to do . Please help me .
ultrafan996 said:
hello , i installed a custom rom on my device ( gt-n7000) and after sometime i wanted to go back to my original firmware and i installed it via odin
but now when i turn on my device it is stuck on loading screen it shows me the samsung logo . I still can go to download mode but i don't know what to do . Please help me .
Click to expand...
Click to collapse
Go to recovery and do a factory reset and reboot. If that don't work u ve to be more specific about what custom rom u are on and what stock are u on
I can't go to recovery mod only on downloading mod N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 this is the firmware i'm using via odin
and I used custom rom jellybam 8.0 .
This is the JB boot loop bug, just install the stock JB for your region and then flash the PhilZ kernel, you can find it in the original Android development forum. And after flashing the PhilZ kernel you're ready to go...hit thanks if i helped.
Varad297 said:
This is the JB boot loop bug, just install the stock JB for your region and then flash the PhilZ kernel, you can find it in the original Android development forum. And after flashing the PhilZ kernel you're ready to go...hit thanks if i helped.
Click to expand...
Click to collapse
i fixed it i only need to go to recovery mod by holdig the buttons for 20 seconds and to wipe data and that's all
thank you for your time anyway
HI FRIENDS.... HOPE SENIORS MEMBERS HELP ME.
I BOUUGHT NOTE N 7000 BEFORE 1 MONTH
IT WAS RUNNING ICE CREAM SANDWICH
BUT IN RECOVERY MODE I TOOK BACKUP OF MY ROM
BUT WHEN I RESTORE IT . IT WAS GIVING ME MD5 MIS MATCH ERORR
I DO IT 5 TIMES BUT WHEN I REBOOT THE PHONE . IT STUCK ON GALAXY NOTE LOGO
IT IS GOING IN RECOVERY MODE ,AND ALSO INSTALLING CWM.ZIP FROM SD CARD AND DOWNLOAD MODE BOTH , I FORGOT MY KERNEL I DNT KNOW WHT WAS THAT.
IT WAS UAE ICE CREAM SANDWICH
I DOWNLOAD UAE JELLY BEAN ROM AND TRY TO FLASH IT VIA ODIN . BUT IT STUCK ON FACTORYFS..IMG (NAND WRITE START)
WHEN I TRY TO FLASH THE ROM VIA SD CARD AND INSTALL ZIP FROM SD CARD IT IS NOT INSTALLING
AND IF I TRY TO RESTORE FROM SD CARD . THE PHONE RESTARTS AND AGAIN STUCK ON SAMSUNG NOTE N7000 LOGO]
PLZ HELP ME
Can you ask again without capslock?
Anyways, my guess is superbrick.
Azeazezar said:
Can you ask again without capslock?
Anyways, my guess is superbrick.
Click to expand...
Click to collapse
ok then give me the solution dude,,
plz
nd thnks for replying
Here's a thread for dealing with different types of bricking ... don't get shocked but N7000 has a bad record for bricks.
http://forum.xda-developers.com/showthread.php?t=1656635
Have you tried Philz Kernel http://forum.xda-developers.com/showthread.php?t=1901191 then update to JB using Odin. I have brick my Note before & got through it like this.
waleed_butt009 said:
ok then give me the solution dude,,
plz
nd thnks for replying
Click to expand...
Click to collapse
Unfortunately, your note will never fully recover. #BlameSamsung
I am a bit to late to provide a link to the solutions, Best of luck.
Also, If you have not done so already, backup your efs partition.
klone_2126 said:
Have you tried Philz Kernel http://forum.xda-developers.com/showthread.php?t=1901191 then update to JB using Odin. I have brick my Note before & got through it like this.
Click to expand...
Click to collapse
dude i dnt know my kernel.
so wht can i do now???????????????///////?
Hi guys ,
Trying to install Andriod 4.4 but not getting baseband . After trying several methods , I read somewhere that installing perseus kernel can solve the problem. So download and flashed the kernel . Since then phone boots upto S3 logo and dies .
I have tried booting up in recovery but does not happer . please advise what shall i do ?
Thanks !
Flash stock firmware via Odin to get a bootable phone first .
Then read the network efs/ imei stickies .
JJEgan said:
Flash stock firmware via Odin to get a bootable phone first .
Then read the network efs/ imei stickies .
Click to expand...
Click to collapse
Thanks , yeah figured that out after reading for hours. tried searching for stock image but was unable to find one that works in odin.
Found one but that was over 1.1 GB but download server did not allowed free download for that.
BTW I can access download mode and have installed Odin 3.9 successfully , just looking for stock image to try flashing.
PS : Mine stock is Australia S3 4G telstra , not sure if other stock images would work or not but really appreciate if someone can refer to me stock image that can be downloaded.
namz said:
Hi guys ,
Trying to install Andriod 4.4 but not getting baseband . After trying several methods , I read somewhere that installing perseus kernel can solve the problem. So download and flashed the kernel . Since then phone boots upto S3 logo and dies .
I have tried booting up in recovery but does not happer . please advise what shall i do ?
Thanks !
Click to expand...
Click to collapse
Have you had Perseus kernel installed previously?
EDIT: Oops, not quite used to the whole 2015 thing yet, sorry for necrobumping.