[Q] Blue Screen when booting in recovery mode - Galaxy Ace S5830 Q&A, Help & Troubleshooting

Dear all,
sorry for my noobishness, but today I've learned that a Cyanogenmod 11 was available with KitKat so I decided to give it a try. I ended up here: http://forum.xda-developers.com/showthread.php?t=2583895
Now, since my Clockwork Mode was 5.0.2.6, I had to upgrade it to 6.0.4.6 as suggested in the same link and so I ended up here:
http://forum.xda-developers.com/showthread.php?p=48806481
and downloaded it via the link in the second post.
Long story short, when I updated it to 6.0.4.6, I get a blue screen when entering recovery-mode, otherwise it works perfectly.
Furthermore, I tried to unbrick it according to this thread here but Odin does not recognize the device: http://forum.xda-developers.com/showthread.php?t=2207919
Also,I tried with Kies and even Kies does not recognise the device but when I 'turn on usb storage', my pc identifies it as GT-S5830.
Anyway, any ideas on how to deal with this?
Thanks a lot for your patience and Regards

Any Ideas guys please?

eventhough you got bluescreen, your system is normal. no need to unbrick it.
you are able to push cwm 5 recovery via odin.
*btw, i got bluescreen too.

N0L3R said:
Any Ideas guys please?
Click to expand...
Click to collapse
you can flash cwm5 from cwm manager in phone, assuming your phone boots fine. Then try installing a cm10 rom first and then install the new cwm6 recovery. For me it worked that way.

Hello guys and thanks for the reply.
Yes I managed to get back to normal via Odin. At first it was unsuccessful because the USB port I was plugging the mobile in was not recognised by Odin but I changed the port and was instantly good to go.
Will see when there is another version of the clockwork mod.

N0L3R said:
Dear all,
sorry for my noobishness, but today I've learned that a Cyanogenmod 11 was available with KitKat so I decided to give it a try. I ended up here: http://forum.xda-developers.com/showthread.php?t=2583895
Now, since my Clockwork Mode was 5.0.2.6, I had to upgrade it to 6.0.4.6 as suggested in the same link and so I ended up here:
http://forum.xda-developers.com/showthread.php?p=48806481
and downloaded it via the link in the second post.
Long story short, when I updated it to 6.0.4.6, I get a blue screen when entering recovery-mode, otherwise it works perfectly.
Furthermore, I tried to unbrick it according to this thread here but Odin does not recognize the device: http://forum.xda-developers.com/showthread.php?t=2207919
Also,I tried with Kies and even Kies does not recognise the device but when I 'turn on usb storage', my pc identifies it as GT-S5830.
Anyway, any ideas on how to deal with this?
Thanks a lot for your patience and Regards
Click to expand...
Click to collapse
Wrong section mate
Please read rules before posting, this is General Thread...NOT Q&A THREAD, so next time post your questions in the correct section plus there're tons of post with the ssame question so try to search before posting

Plzz someone help I did same mistake and Phone showing blue screen and USB cant be recognized in my computer and my frnds computer to someone Plzz help

Figured it out!
Hi, can I ask how you changed the port please? I can see the port registry key but what value did you change it to to get it to work?

Related

[Q] Rooting galaxy s with gingerbread 2.3.3

I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Uh... sounds like something is seriously wrong with your phone dude =\ You should be able to get to d/l mode regardless. Does the phone still work fine otherwise?
Unable to root sgs gingerbread NEJVD
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
samgal111 said:
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
Click to expand...
Click to collapse
Did you try diffrent usb port on your cpu?
also..on the cpu that your using odin to flash , do you have kies installed?
if so make sure it isn't running ( i would uninstall just incase)
see if that helps.
Sent from my i9000t XDA app
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
caribbean_spur said:
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
afalk said:
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Click to expand...
Click to collapse
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Dorilife said:
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
Click to expand...
Click to collapse
Thanks for the reply! Ok, I finally manage to have the 3button combo work and get into download mode and recovery mode. I want to root, can you tell me if the odin method works on 2.3.3 stock, on I9000T . Also, How can I fully backup my phone. Which android version did you have when you rooted.
Also, I keep reading those very old threads and I was wondering what the latest Odin version is used for 2.3.3.
elita said:
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Click to expand...
Click to collapse
Tried this workaround, but still no luck with Odin. When fone is in download mode, I get the message apling multi-csc...Installing multi-csc then "unable to access system/csc/H3G/system/".Couldnt roll back the os through kies either before I uninstalled it. Any help highly appreciated
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Wrong button combo
caribbean_spur said:
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Click to expand...
Click to collapse
Turns out We/I have been using the wrong button combo for download. Download mode is: Vol DOWN+Home+Power On.!!! Recovery mode is Vol UP+Home+Power On. I used Fuguroot with my stock kernel from RAMAD (senior developer). Flashed with odin & it took LESS THAN 2 MIN! Check out this link here http://forum.xda-developers.com/showthread.php?t=1011901.Hope this helps. Do remember to thank Ramad and Nicademus!
good you figured out
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
rrubio999 said:
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
Click to expand...
Click to collapse
I don't have a galaxy tab, but it should be similliar to my galaxy s. I think your device is NOT bricked. As long as you can get to download mode, your device is NOT bricked. If you can get there, you should try to flash with odin/heimdall again. I think you must have done something wrong in the flashing process. AFAIK the logo is displayed by bootloader (primary), so if nothing went wrong with flashing the secondary one (download mode), you should be able to flash again.

[Q] HELP PLEASE Bootloop problem

I was trying to install the Teamhacksung's ICS for Captivate but when i was trying to select the rom, it gave me the status 7 problem. So then i found the Q&A Post about the rom, in which it said that if i had that status 7 problem i should install a kernel that was linked there. So i download it, and as i read on another post, i flashed the kernel the same way I would do with any ROM. The problem came when, once it had finished, I rebooted the phone, and then, the initial screen which says GALAXY S and SAMSUNG below, then a screen that says GALAXY S and below Cyanogen Mod, and finally a quick screen that looks as if the clockwork recovery mod is doing something( impossible to read), and then it takes me to the initial screeen and it repeats over and over. Someone please please help me, I can't get into the recovery mode with the three button mode aswell, Help!!!
Can you get to download mode? If so, you can flash back to a stock rom and try again.
You may also want to check the items in the "Captivate connection issues" thread in my signature.
No, I can't get to download mode, I can't even get into the home screen, I only see the first screens that enter in loop, and that is as far as I get.
EDIT: Yes! At least i made it into the download mode thanks to your post. What's next ?
Look in the development section for the sticky referring to Odin and Heimdall one-clicks. Grab one of those (preferably a bootloader-free version) that has the same setup as you had before you flashed ICS (in other words, flash a Froyo one if you had froyo, Gingerbread if you had gingerbread).
That should put you back in a clean state where you can start again.
(You can also grab the Heimdall UCKH3 one in my signature if you were on Gingerbread - one less search step.)
Thanks for answering. Just a few things. First, the download link of the Heimdall UCKH3 on your signature is broken, but i found on this thread http://forum.xda-developers.com/showthread.php?t=1348392 the onelink.jar file. That's what you meant when you said to grab a 'Heimdall one-click' ? Also, I have entered download mode and it shows the android digging up. But now that i have to open the Heimdall before connecting the phone, should i pull off the battery to exit this screen, open the oneclick and then connect the phone to enter the download mode ?
Thanks for catching that - guess it went down with the whole Megaupload thing.
I would grab this one. It's Odin-based, but should do the same thing, and it's Captivate-specific.
I wouldn't get out of download mode just yet. Unhook your phone from the computer, start the one-click, and reconnect it. With luck, you should be able to flash. If not, then do your battery pull / restart to download and try again.
Thanks for the link. I've downloaded it, unhooked the phone(the download screen didn't changed), started the one click and reconeccted it. A message appeared that said:
ID:0/006 Added!
Then I touched start button, and three more messages showed,
Odin v.3 engine(ID:6), File Analysis, Setup Connection.. and is still there. Have I done it right ? Do you know how much time is estimated to take, or I should have done something else ? I am asking all these questions, because, as you may see, i don't understand most things. Thank you
Thank you so much jmtheiss it worked fine now i'm running the stock version.
Glad to hear it worked for you.
I was wondering if you could help me with a similar problem. My Cappy is operating just fine on a ROM I flashed about 6 months ago, but I am not wanting to flash back to Stock. When I plug my cappy in to the computer (I'm running Ubuntu 11.10), the computer recognizes it and I'm able to transfer files just fine; however when I enter the cappy into Download mode, the computer will not recognize it anymore. Any help is much appreciated.
Are your libusb drivers installed, and are you using heimdall?

so my brother brought me his semi bricked n7000 "btw i searched and googled"

so my brother brought me his semi bricked n7000 "btw i searched and googled"
well, yesterday my brother brought me his cellphone which doesn't boot anymore, he wanned to install a custom rom since he saw that i have a fast one (galaxy s I)
so when i asked him what he did , he said he followed all the steps in rootgalaxynoteDOTcom/galaxy-note-roms/kingdroid-ics-rom-v3-0-for-galaxy-note-gt-n7000-best-ics-romtouchwiz-ux/[/url]
but then, his phone didn't boot, so he wiped - reset factory setting, which i read is a BIG NO when you're flashing ICS.
so whats done is done, i am trying to get it back , i can boot in recovery mode/download mode ... i tried out many kernels like AbyssNotekernel42RedTouchCustomLogo or speedmod, and downloaded at least 4 or 5 GB stock roms.
sadly , if odin flash is successful, it stuck on (samsung galaxy note gt-n7000) black srcreen, reboots few times then stays still...
if the odin flash wasn't successful , it keeps stuck on data.img and never goes beyond that .
i did all the steps i could find, wiped data after installed stock GB rom and rebooted, nothing worked
i even used rogue_ET-recoveryonly , and i think it went along format all the way, but still nothing happened after that.
the only thing i haven't tried yet was the repartition + pit file, i couldn't find the PIT , most of the roms have pda/modem/csc ... so if anyone can help out, i would really appreciate it ..
thanks
First thing you should do is check other threads about that around here.
If you can get it into download mode, you could give flashing with Odin a try. If it doesn't get stuck at factory.fs, then you're not superbricked.
If it does get stuck, then you have 2 more hopes:
- HOPE 1
- HOPE 2
If those don't work either...I'm afraid it's off to the Samsung Service center for a shiny new motherboard.
Best of luck to you and hope you get your Note up and running as soon as possible...
thanks, no it doesn't get stuck at factoryfs at all , i did check out most of the threads here, and most of them say "go back to GB with odin and if its stuck on samsung gt-n7000 boot screen just go back with recovery mode and then wipe data / cache " but never worked, so i thought i should ask around here
i'll check out the threads you posted and see what i can come up with
weird, i used the 16gb pit - repartition (check)
and i flashed it with SGN_XX_OXA_KJ1_FACTORYFS through odin.
and its still the same, the flashing with odin was successful and everything went fine, no hanging , no delays or what so ever. after it restarts its stuck on the black samsung galaxy note gt-n7000 screen
im gonna wipe data / cache again but i doubt that would fix anything.
so any idea what could be wrong? specially when the flashing process went fine?
i've already tried like 4 stock roms ,
arabic uae , europe , saudia and the SGN_XX_OXA_KJ1_FACTORYFS
i wonder if i need to put something in boot space in odin "just a thought"
ive tried downloading roms from here [STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest ICS LQ3
and here [STOCK ODEX PRE ROOTED ROMs] for Odin PC no counter & triangle
any ideas?
For OP:
If you are not stucking while flashing from PC Odin then you are not superbricked.
I think you got corrupted /system or other partition; I saw another thread where OP was getting this sort of hang due to filesystem corruption which can't mount.
Entropy512 gave simple dd command based solution for erasing initial 1MB of partition.
Try searching for corrupted filesystem/partition related information. I can't recall exact thread title, sorry.
I hope this will help.
I found the post/thread for you to check: http://forum.xda-developers.com/showpost.php?p=27102526&postcount=16
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
johar123 said:
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
Click to expand...
Click to collapse
Should try to install/reinstall samsung usb driver package. or try reinstall Kies also provide drivers for Note.
If driver is install properly: when connect with PC using usb cable it need to be shown under hardware management as something like "android composite adb interface" or something like that.
johar123 said:
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
Click to expand...
Click to collapse
Also are you trying to connect adb after booting the phone ? Means in a stuck state ? I think you can try enabling ADB thing from CWM rather than trying to boot phone fully.
hmm i can't find an option in CWM that suggests that , still searching
also im trying to find roms that i can install from CWM , are there any GB roms that can be directly installed from CWM ?
thanks.
johar123 said:
hmm i can't find an option in CWM that suggests that , still searching
also im trying to find roms that i can install from CWM , are there any GB roms that can be directly installed from CWM ?
thanks.
Click to expand...
Click to collapse
Hi: I understand he means boot the phone into CWM and then connect to PC in that environment. adb need to be run from PC while the phone is booted into CWM recovery.
Still, most of the custom roms are in the .zip format and can be install using CWM. they just now become a bit more difficult to find since dev move on to ICS/CM9 roms. Still try to find some GB roms in the forum such as: rocket GB, litening GB, xtralite GB....
This is the link for Rocket rom GB. Better try v22 than v23.
http://forum.xda-developers.com/showthread.php?t=1380284
Check rom:
http://download.checkrom.com/roms/a...oteHD_V3.zip?iframe=true&width=950&height=420
cheers,
forest1971 said:
Should try to install/reinstall samsung usb driver package. or try reinstall Kies also provide drivers for Note.
If driver is install properly: when connect with PC using usb cable it need to be shown under hardware management as something like "android composite adb interface" or something like that.
Click to expand...
Click to collapse
done that already.. everyone is saying is "get into recovery mode" >.>
johar123 said:
done that already.. everyone is saying is "get into recovery mode" >.>
Click to expand...
Click to collapse
Yes, recovery mode is in CWM. (in case you have not done it: Enter recovery by,from phone power off: pressing volumeup + home + power and release power when see samsung letter while still hole the other two buttons.)
forest1971 said:
Hi: I understand he means boot the phone into CWM and then connect to PC in that environment. adb need to be run from PC while the phone is booted into CWM recovery.
Still, most of the custom roms are in the .zip format and can be install using CWM. they just now become a bit more difficult to find since dev move on to ICS/CM9 roms. Still try to find some GB roms in the forum such as: rocket GB, litening GB, xtralite GB....
cheers,
Click to expand...
Click to collapse
thanks for the reply, i've done it many times, when im in the CWM screen, the adb devices still doesn't show anything >.> maybe im using a wrong kernel? what kernel you guys suggest?
johar123 said:
thanks for the reply, i've done it many times, when im in the CWM screen, the adb devices still doesn't show anything >.> maybe im using a wrong kernel? what kernel you guys suggest?
Click to expand...
Click to collapse
hmm. that should be still the problem with usb driver. Have you checked under hardware management if it show the device as "samsung composite adb interface" yet?
kernel should not be the problem with connecting adb. It is the problem with usb driver for Note. Sometime Win7 have problem with driver. You may want to search for another package of samsung usb driver on the web.
I did put some links of GB roms in the post in the previous page. maybe try them first if any luck.
Also try to restart computer to see if the driver issues get solved.
Got to go. Hope that you can solve the problem. GL.
forest1971 said:
hmm. that should be still the problem with usb driver. Have you checked under hardware management if it show the device as "samsung composite adb interface" yet?
kernel should not be the problem with connecting adb. It is the problem with usb driver for Note. Sometime Win7 have problem with driver. You may want to search for another package of samsung usb driver on the web.
GL.
Click to expand...
Click to collapse
thanks, i restarted my pc , reinstalled kies, and now it shows under device manager
now i connect to the phone through adb , i appreciate you pointing it out
which method you think i should go for 1st? this one
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
or unzipping a rom and then pushing it all through adb?
i think i'll go for removing and repartitioning manually, hopefully it'll work
thanks again guys , i'll post the updates here,
lol, my brother called me and he's like "if u can't fix it by the end of the night, fk it, dont bother yourself with it" but to be honest, im too stubborn, i hope i can fix it
looks like deleting and adding partitions back through parted kinda work, for the first time i was able to pass the boot screen after i installed rocketrom from CWM
however, its been 1/2 hour since im stuck on rocketrom loading screen it keeps looping and looping.. i wonder if i should wait more.. or should i try another rom?
finally got rid of the verification -.- was kinda annoying thats why i didn't bother editing posts,
anyways, rocketrom didn't work, so i decided to flash a stock rom instead , the flash through odin went fine, it was great to be able to wipe data without getting stuck , however, it keeps going though samsung animation over and over, i think im gonna leave it like this one the charger till morning, i wonder if it'll be the same
guess i have to google for "samsung loop" , i wonder why this keeps happening though -.-
-.- leaving it for 6 hours on samsung logo animation didn't do the trick , still looping when i woke up, so i guess i'll do some more search on why this is happening.
You have checked partitions and see no error that means the problem lies somewhere else, not partitions. I have no idea yet, but for me I would try some different roms. Small roms have more chance to work, that is the feedback I got from some people:
- try check rom in the link I sent
- try paranoid android which is CM9, or asylum
- extralite
cheers.
forest1971 said:
You have checked partitions and see no error that means the problem lies somewhere else, not partitions. I have no idea yet, but for me I would try some different roms. Small roms have more chance to work, that is the feedback I got from some people:
- try check rom in the link I sent
- try paranoid android which is CM9, or asylum
- extralite
cheers.
Click to expand...
Click to collapse
thanks buddy, i appreciate your help, the partition "USED" to give me error when i did the check 9 10 11 , but after removing the partition and reformatting them (and i also removed the cache partition) now its working fine "i suppose" i didn't do another check, but i might will now that you mention it.
i already tried rocket rom, didn't work, stock rom didn't work, so i'll give the others a try at least it doesn't get stuck on the boot screen, but its stuck on the animation logo which is an improvement
thanks again

[Q] Can this i9000 be recovered?? or is it totally bricked??

Hey all,
I have recently been given a phone by a friend, a SGS i9000. He bought it as is, and being n00b he couldnt describe anything to me about how or why it was like this. As I have a i9000 myself I took a bit of a look at it, I have no idea what firmware,rom,kernel etc is on it. After researching around it seems to be locked in a bootloop, I can not access any recovery menu, if I hold the power + home button I get the screen below (found this button combo somewhere in the forums, attaining to the Samsung anycall, korean?), but when plugged into my computer it comes up saying "windows could not recognize device blah blah". Any hope??? Last resort will be to get a jig, but ive never had to use them before and not sure if it will solve my issue. Any help would be much appreciated.
Thanks
battznz
battznz said:
Hey all,
I have recently been given a phone by a friend, a SGS i9000. He bought it as is, and being n00b he couldnt describe anything to me about how or why it was like this. As I have a i9000 myself I took a bit of a look at it, I have no idea what firmware,rom,kernel etc is on it. After researching around it seems to be locked in a bootloop, I can not access any recovery menu, if I hold the power + home button I get the screen below (found this button combo somewhere in the forums, attaining to the Samsung anycall, korean?), but when plugged into my computer it comes up saying "windows could not recognize device blah blah". Any hope??? Last resort will be to get a jig, but ive never had to use them before and not sure if it will solve my issue. Any help would be much appreciated.
Thanks
battznz
Click to expand...
Click to collapse
Identify what Phone it could be by checking its top corner for a Tucked in TV Antenna ...if you can pull out an Antenna its an M110S, if not it is an i9000 flashed with a wrong ROM. IF its M110S , just use PIT STOP link below to resolve using How to flash guide
The Anycall screen you are getting means it is still in download mode and can be detected by Odin, if not do a battery pull ( follow My Android Solutions, link below)
xsenman said:
Identify what Phone it could be by checking its top corner for a Tucked in TV Antenna ...if you can pull out an Antenna its an M110S, if not it is an i9000 flashed with a wrong ROM. IF its M110S , just use PIT STOP link below to resolve using How to flash guide
The Anycall screen you are getting means it is still in download mode and can be detected by Odin, if not do a battery pull ( follow My Android Solutions, link below)
Click to expand...
Click to collapse
Thanks for your reply.
I have looked to see if there is an antenna, nothing there. Ive tried rebooting the PC, and done a battery pull. Whilst in bootloop ive plugged in the phone, nothing comes up. Whilst in download mode, ive plugged in the phone, device detected but unrecognized. I removed everything......then......
1) Uninstalled all drivers and KIES from my PC > Reboot
2) Went to Android solutions, started with step one, no help.
3) Went onto step 2 (Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable),I checked to see if any pins were bent, and cleaned the contacts using some mini brushes I had. I am using a Samsung USB, same one i use for my i9000, which works 100%. Installed and tried every driver seperately, whilst trying to see if odin would detect anything.
NOTHING :crying:
Tried different ports etc. The only response I get is when ive put the phone into download mode (Home+Power), then all I get when connected to PC is "USB Device not Recognized". Im grateful that I get that, but cant do much else haha.
Can you suggest anything else?? can I even use the jig as a last resort???
Did you remember that you need to reinstall drivers?
monkeywithbanana said:
Did you remember that you need to reinstall drivers?
Click to expand...
Click to collapse
Hey thanks for your reply, if youre referring to the PC, then yes I removed all the drivers that did not work, and lastly reinstalled Samsung KIES. Still no change to the device being recognized by windows.
battznz said:
Can you suggest anything else?? can I even use the jig as a last resort???
Click to expand...
Click to collapse
Nothing wrong with the phone except that its, now loaded with a wrong boot loader, ...try borrow a lap top or PC to connect in download mode, to flash a i9000 rescue or resurrection kit from MY Androids collections link below
xsenman said:
Nothing wrong with the phone except that its, now loaded with a wrong boot loader, ...try borrow a lap top or PC to connect in download mode, to flash a i9000 rescue or resurrection kit from MY Androids collections link below
Click to expand...
Click to collapse
Thanks I will give it a try, will let ya know how I get on.
Hi,
Thanks for the guide, i got 90% there and the program closed. This is what I got, when using the heimdall rescue kit:
Uploading KERNEL
100%
KERNEL upload successful
Uploading MODEM
100%
MODEM upload successful
Uploading FACTORYFS
100%
FACTORYFS upload successful
Uploading DBDATAFS
100%
DBDATAFS upload successful
Uploading CACHE
100%
CACHE upload successful
Uploading IBL+PBL
100%
ERROR: Failed to confirm end of file transfer sequence!
IBL+PBL upload failed!
Ending session...
Rebooting device...
Click to expand...
Click to collapse
Please HELP me
What do I do from here??
Attached are the results I get when trying to use odin and trying to flash EZBASE.
I get further in flashing using heimdall. Without trying to sound n00b, can I not flash the bootloader to something that works???
battznz said:
Attached are the results I get when trying to use odin and trying to flash EZBASE.
I get further in flashing using heimdall. Without trying to sound n00b, can I not flash the bootloader to something that works???
Click to expand...
Click to collapse
try ezboot from My Android collections link below
xsenman said:
try ezboot from My Android collections link below
Click to expand...
Click to collapse
Hi, ive tried ezboot, still no luck, I get the same error message in odin. Grrr frustrating, seem to be throwing solutions at it but nothing is cracking it.
Is there a way i can do it through heimdall?? seems to get more done when trying to flash except the error i get above?? perhaps how to do a bootloader flash using heimdall not odin??
Thanks
battznz said:
Hi, ive tried ezboot, still no luck, I get the same error message in odin. Grrr frustrating, seem to be throwing solutions at it but nothing is cracking it.
Is there a way i can do it through heimdall?? seems to get more done when trying to flash except the error i get above?? perhaps how to do a bootloader flash using heimdall not odin??
Thanks
Click to expand...
Click to collapse
I think the solution to your problem has been found, and your phone is actually an M110S Anycall galaxy S..read this thread http://forum.xda-developers.com/showthread.php?t=1888319...so you need to use the M110S repair kit, download from Pit Stop, link below and flash as per guide or like this http://forum.xda-developers.com/showpost.php?p=28174768&postcount=4774
First of all I would like to thank you xsenman, your posts and guides on these forums have been a huge help. Going along with what you said in your last post, I have started downloading the repair kit, then hopefully do an official update for here (Australia).
I just want to add, you may want to add the the following as a solution to a lot of problems (it helped me verify).
I had a look at this thread:
http://forum.xda-developers.com/showpost.php?p=30797809&postcount=1
And about half way through the thread is IMEI check
I entered the IMEI from my phone (an official samsung gti9000), and it came back with a result saying exactly that.
I then entered the IMEI from my friends phone (bought from ebay >:/ go figure), and it came back saying it was M110S but so has it that the internal sticker on my friends phone says model: GT-i9000
If anyone else gets into a confusion like I have, which it is hard to tell if its fake or not. Posting/sticky the imei check will save a lot of time, heart ache and possibly from creating a $200 paper weight.
Once again thank you so much, hopefully this repair kit will work and the phone will be up and running.
:good:

status 7 error

hello i've been trying 2 get a new rom for my brother's SGS+
but almost every rom i try (mostly jelly bean and ics roms but also some gb ones) give me n error
when i try 2 install them through recovery mode,
i get error status 7, installation aborted
now i looked for this problem on the internet and it appears there r some solutions found on this link:
http://www.knowtechbetter.com/how-t...ry-cwm-while-installing-flashing-custom-roms/
however i did not understand any of this
i m not new in installing roms and such but i m not very femilier with all these "more complicated" things
i noticed at the comments that the first solution helped someone
and it looks easy, if any1 could explain me shortly how do i do this this would be very helpful.
thanks~
Install newer CWM.. you have to ask this in the special thread made for it
broodplank1337 said:
Install newer CWM.. you have to ask this in the special thread made for it
Click to expand...
Click to collapse
i have faemod v1.2 based on cwm 5.0.2.7 ..
and honestly i dont know which threat you are reffering to
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
mrjraider said:
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
Click to expand...
Click to collapse
if u could help me just a little more, i cant find it.
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
mrjraider said:
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
Click to expand...
Click to collapse
thanks i managed 2 install cwm 6
but i encountered a new problem.
i installed the non-touch verision and now i cant do the "select" option
it is supposed 2 be the power button but it doesnt work
so now i cant do anything..
also i tried rom manager but it just opens recovery mode for me
any way i can return to an old verision of recovery w/o using the reovery mode so i can go back and install the touch verision this time?
There are more buttons to use. If i can remember you need to use the menu button
mrjraider said:
There are more buttons to use. If i can remember you need to use the menu button
Click to expand...
Click to collapse
tried them all.. i am really stuck here
appearntly alot of ppl have this problem.
is there any way to install it through odin or some other app?
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
mrjraider said:
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
Click to expand...
Click to collapse
maybe im doing it wrong but odin doesnt even recognise the file.. and there is no guide there
i did try a odin flashable cwm V6 but its stuck on "setup connection" each time i try..
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Just flash TWRP and you're good to go
Sent from my GT-I9001 using xda app-developers app
mrjraider said:
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Click to expand...
Click to collapse
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
hey man relax... in wiki page you'll find cwm5.5.0.4 flashable zip and you can install it from recovery ( even from stock recovery if i remember corectly)... if you can't acces your phone you can copy it from pc to phone using recovery ( mounts and storage )... if you are stuck in recovery( you're phone boot in recovery only ) you'll need to flash the bootloader using odin.. also you can find the steps and necessary files in wiki and in cm10 by ivendor in firrst post ..Good Luck !!!
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
mrjraider said:
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
Click to expand...
Click to collapse
see the problem?
http://i39.tinypic.com/amp1ch.png
the thing is even tho i read your guide it seem like im doing something wrong..
for instance when i add the files both ops and "one package" file it doesnt see them so i have to write their location
shahaf321 said:
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
Click to expand...
Click to collapse
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
educk said:
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
Click to expand...
Click to collapse
i did try using his guide and i folowed it step by step
my only problem is that odin gives me that message i showed in my last post..
also untill i fix this soft brick i cant move on to recovery mode so
i need 2 fix that first..
the guide doesnt show anything related to what im doing wrong..
Someone with brains would have removed odin, and the ops file and redownloaded it again. Also save those on your desktop

Categories

Resources