Database Develop

Replacement LCD

Hi everyone,
I replaced my LCD screen and digitizer at the weekend and am now having a few problems. The battery is draining really quickly, in about 30mins. Could this be due to a non oem screen or something? (got mine off ebay)
I am also having a few issues with the power button, there was a small amount of tape in place but im unsure if this should go below the switch or above. To prevent the circuit board switch from shorting or something?
Any help appreciated.

how much did you paid for digitizer?

well I got an LCD with digitizer attached for $43

I'm needing the same, how difficult was it to put back together,
taking it apart isnt a problem but theres that many parts I'm not sure if I could put it back together correctly

Can you tell me how many different variants of the LCD are used in the Diamond? or there is just ONE LCD w/ digitizer..? And from where can I get them for a good price?

Well to be honest, I have only had problems since I changed mine and the phone is now unusable. Its quite easy to put back together, but it seems really easy to create shorts that cause problems and I think the quality of the LCD I bought is far below that of standard and is using lots of power.
Have ordered another screen from somewhere else and will try that but think I will get a leo next week as then im due an upgrade
Would still appreciate some help with my original questions?

I bought on ebay both/LCD+touch screen/. Price is fine 36US dollars. When you buy only on of this you have problem with right connection between LCD and touch screen. Picture have little contrast but not tragically. Battery draining is same. Touch screen is more sensitive than original.

changed lcd and gps doesnt work
hello everbody..
i changed lcd my diamond and gps doesnt work. what does it mean. please help me...

naytinger said:
hello everbody..
i changed lcd my diamond and gps doesnt work. what does it mean. please help me...
Click to expand...
Click to collapse
Maybe is problem with correct connect gps antenna to connector on board.

To update this I bought a new screen with digitizer from a US company and replaced the board that connects to the microphone and now more Diamond is as good as new.
Screen is as original and excellent quality

99048907 said:
well I got an LCD with digitizer attached for $43
Click to expand...
Click to collapse
Oh that high. A friend of mine got it for $27

99048907 said:
To update this I bought a new screen with digitizer from a US company and replaced the board that connects to the microphone and now more Diamond is as good as new.
Screen is as original and excellent quality
Click to expand...
Click to collapse
Thats great, the battery drainage fixed? If all worked you should post where and for how much you bought it. So other people in need would know

99048907 said:
To update this I bought a new screen with digitizer from a US company and replaced the board that connects to the microphone and now more Diamond is as good as new.
Screen is as original and excellent quality
Click to expand...
Click to collapse
Hi,
my screen today has just started displaying loads of lines over it, i have tryed flashing but the lines stay, there is even a ghost of the Win Mobile Lock screen symbol.
Is the screen broken?
please can you post where you got your working screen from as i think i need to buy one!!
thanks
MG

MysticGenius said:
Hi,
my screen today has just started displaying loads of lines over it, i have tryed flashing but the lines stay, there is even a ghost of the Win Mobile Lock screen symbol.
Is the screen broken?
please can you post where you got your working screen from as i think i need to buy one!!
thanks
MG
Click to expand...
Click to collapse
Was your screen original from HTC or you have replaced it before??

samy.3660 said:
Was your screen original from HTC or you have replaced it before??
Click to expand...
Click to collapse
Hi,
screen is original.
what happened was, i enabled win mobile autolock, and then i kinda had a fit. It was turning the screen on and off for about 1 second each time, i thought it would stop so i waited about 40 seconds, then hit the reset button.
when the phone reset it still had an "imprint" of the windows mobile lock screen on the screen, as if it had "burnt" all the white areas onto the screen.
I tryed to screenshot it, but it didnt show in a screenshot so i presumed the screen was wrecked.
I have left my phone without battery overnight and it SEEMS to have sorted itself out, but im not sure!
Thanks in advance
MG

p.brazauskas said:
Thats great, the battery drainage fixed? If all worked you should post where and for how much you bought it. So other people in need would know
Click to expand...
Click to collapse
Thought this was fixed but the battery drainage is still huge. The phone is now constantly hot, so have stopped using it. I have dismantled the phone countless times now as I thought there may be a short circuit but with no fix.
When I posted originally the battery was on 85% after 4 hours but then the next time I turned the screen on it was on 1%.
Its annoying as I loved my Diamond but now I just feel angry when I see it on my desk. Using an old moto flip phone at the moment which I hate, untill some shops get the leo back in stock. Tempted by the n900 also, any thoughts?

Hi,
I will change my Diamond's screen. Did you buy it online? If so, would you please send a link of the LCD w/ Digitizer that you bought. Thanks in advance

[Q] Incredible S touchscreen problem.

For the past 2 weeks there is a big line of my screen at the bottom of my screen that is completely unresponsive. For example, I use the android revolution sense 3.0 ROM by mike1996, and I can barely unlock the phone because the ring is exactly in that spot, although it works after many tries. Typing is a pain in the a** unless in landscape. Anyone had this problem or a solution on how to fix it?
Sent from my HTC Incredible S using XDA

i too have this problem .... a line on the screen remains completely unresponsive .. it is a hardware problem ? ... should i have to replace the display with new one ?... please help guys ..

Looks like a Hardware problem if that appears in every rom.

this is hardware problem i had a small patch on screen of my htc touch(back in time when we used stylus) send it to repair center.

RaffleSpike said:
For the past 2 weeks there is a big line of my screen at the bottom of my screen that is completely unresponsive. For example, I use the android revolution sense 3.0 ROM by mike1996, and I can barely unlock the phone because the ring is exactly in that spot, although it works after many tries. Typing is a pain in the a** unless in landscape. Anyone had this problem or a solution on how to fix it?
Sent from my HTC Incredible S using XDA
Click to expand...
Click to collapse
many people having problem like that sometimes screen lag, but press Power button and it solve

RaffleSpike said:
For the past 2 weeks there is a big line of my screen at the bottom of my screen that is completely unresponsive. For example, I use the android revolution sense 3.0 ROM by mike1996, and I can barely unlock the phone because the ring is exactly in that spot, although it works after many tries. Typing is a pain in the a** unless in landscape. Anyone had this problem or a solution on how to fix it?
Sent from my HTC Incredible S using XDA
Click to expand...
Click to collapse
you have to replace the digitizer of your phone,
i used to have this issue on my GF incS and she got sick of it the way it became and bough the oneX, then i replaced the digitizer myself and got an extra working phone

It works!
20545ZR16 said:
you have to replace the digitizer of your phone,
i used to have this issue on my GF incS and she got sick of it the way it became and bough the oneX, then i replaced the digitizer myself and got an extra working phone
Click to expand...
Click to collapse
Thank you!
After replacing the digitizer, even though it was very complicated, my touch screen works like a charm! Let's hope it remains that way.
If anyone has this problem, replace the digitizer.

RaffleSpike said:
Thank you!
After replacing the digitizer, even though it was very complicated, my touch screen works like a charm! Let's hope it remains that way.
If anyone has this problem, replace the digitizer.
Click to expand...
Click to collapse
you are welcome,
now all we have to do is try not to drop it on the floor

Thanks a bunch, i'm having the same problem.
I'll sure replace the digitizer and try to fix it... it's good to know that there's more people having the same problem!!

[Q] Touch screen not responding in the middle

My Incredible S has a touch screen fault. There is a area in the middle of the screen that does not respond to touch - see attachment.
I have fitted a new digitizer screen thinking that would cure the fault, but unfortunately the problem still remains.
Does anyone know what causes this and is there a solution?

ludemon said:
My Incredible S has a touch screen fault. There is a area in the middle of the screen that does not respond to touch - see attachment.
I have fitted a new digitizer screen thinking that would cure the fault, but unfortunately the problem still remains.
Does anyone know what causes this and is there a solution?
Click to expand...
Click to collapse
hey
i had the same problem except that my UNTOUCHABLE part was horizontal
anyways;
i read on several pages on net that digitizer needs to be fixed
but i asked an expert at service center and i was told that i need to replace a touchpad and screen both NOT the digitizer
i did it in INR2000 and now my INCs runs flawlessly and smoothly

prunzzz said:
hey
i had the same problem except that my UNTOUCHABLE part was horizontal
anyways;
i read on several pages on net that digitizer needs to be fixed
but i asked an expert at service center and i was told that i need to replace a touchpad and screen both NOT the digitizer
i did it in INR2000 and now my INCs runs flawlessly and smoothly
Click to expand...
Click to collapse
Thank you prunzzz for your response. I was wondering if replacing the lcd/digitizer assembly was the answer and now you have confirmed it I will go ahead and order one. :good:

ludemon said:
Thank you prunzzz for your response. I was wondering if replacing the lcd/digitizer assembly was the answer and now you have confirmed it I will go ahead and order one. :good:
Click to expand...
Click to collapse
hey please hit thanks rather than posting it!!
you know;thanks meter matters
best wishes for a 'healthy' phone!!

prunzzz said:
hey
i had the same problem except that my UNTOUCHABLE part was horizontal
anyways;
i read on several pages on net that digitizer needs to be fixed
but i asked an expert at service center and i was told that i need to replace a touchpad and screen both NOT the digitizer
i did it in INR2000 and now my INCs runs flawlessly and smoothly
Click to expand...
Click to collapse
Hello!
I am having the exact same issue (middle portion of touch-screen not working - horizontally) I was looking for a solution, and found your helpful post. Thanks added, can you please tell me what all did you replace? Just the digitizer?

Same prob as yours
prunzzz said:
hey
i had the same problem except that my UNTOUCHABLE part was horizontal
anyways;
i read on several pages on net that digitizer needs to be fixed
but i asked an expert at service center and i was told that i need to replace a touchpad and screen both NOT the digitizer
i did it in INR2000 and now my INCs runs flawlessly and smoothly
Click to expand...
Click to collapse
Brother I too have the same problem but I just bought and replaced the digitizer worth 1500 INR, Still the problem persists. I wanted to know what do u mean by saying "touch pad" ? Is it the digitizer ?
I am sorry if its a silly question

Touch digitizer broken help needed

My turbo fell down and the touch is broken ... The entire touch screen is not working ... Including the 3 capacitative buttons ...
I want to know y cant we replace the digitizer alone and not the entire display as the display is working jus fine ....
Also is there any co other than mmx which makes or imports the accessories ... As the service center guys are demanding about 7500 + labourcharges + taxes ....
Sent from my Micromax A116 using xda app-developers app

in canvas turbo both digitizer and display are joined in a way that they cant be removed.....
new digitizer and display costs about 5 k ......(10 k on ebay)

Well ive given it to SC yesterday... Couldnt get the spare outside... He has quoted me 6800 ....
Sent from my Nexus 4 using xda app-developers app

Same Problem
dineshk_007 said:
My turbo fell down and the touch is broken ... The entire touch screen is not working ... Including the 3 capacitative buttons ...
I want to know y cant we replace the digitizer alone and not the entire display as the display is working jus fine ....
Also is there any co other than mmx which makes or imports the accessories ... As the service center guys are demanding about 7500 + labourcharges + taxes ....
Same problem with me suggest me what to do please
Click to expand...
Click to collapse

No nothing much can b done ... Just today got the mob after replacing the disp nd touch .... Spent 6800 in all aftr much negotiations ....
Sent from my Micromax A116 using xda app-developers app

dineshk_007 said:
No nothing much can b done ... Just today got the mob after replacing the disp nd touch .... Spent 6800 in all aftr much negotiations ....
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
My phone also has broken screen with touch not working only 10% of the area around bottom right corner and 3 control buttons. I can still dial numbers and make phone calls. I have checked with Service center and they were quoting around Rs.7K. I bought this phone for Rs.14.5K around 2 months back. I feel its very costly to spend 50% of the phone cost to repair touch problem.

marisg said:
My phone also has broken screen with touch not working only 10% of the area around bottom right corner and 3 control buttons. I can still dial numbers and make phone calls. I have checked with Service center and they were quoting around Rs.7K. I bought this phone for Rs.14.5K around 2 months back. I feel its very costly to spend 50% of the phone cost to repair touch problem.
Click to expand...
Click to collapse
Well if the 3 buttons are not working alone... Then ur safe... U can root ur Mobile and use softkeys juat like nexus phones... Try it once.. May b u need not replace the touxh at all...

dineshk_007 said:
Well if the 3 buttons are not working alone... Then ur safe... U can root ur Mobile and use softkeys juat like nexus phones... Try it once.. May b u need not replace the touxh at all...
Click to expand...
Click to collapse
Hi,
Yesterday my son piss on my mobile. A few drops went in through earphone hole. Immediately switched off the mobile and cleaned with earbuds. While switching off the i saw the screen flickering and earphone symbol with out attaching earphone jack. After some time, switched on screen is blank. but the system working. First Service centre people say's display costs 7000/-.(approx) when he open the mobile he says total board has to the changed and it costs 9000/-.
I think it is only display problem. Becoz i hear the boot screen sound. If i buy the spare (Lcd + Touch) on ebay and get it replaced by un-authorised service centre......It might cost less than 7000/- Sugest me... please...........

sai.suri1983 said:
Hi,
Yesterday my son piss on my mobile. A few drops went in through earphone hole. Immediately switched off the mobile and cleaned with earbuds. While switching off the i saw the screen flickering and earphone symbol with out attaching earphone jack. After some time, switched on screen is blank. but the system working. First Service centre people say's display costs 7000/-.(approx) when he open the mobile he says total board has to the changed and it costs 9000/-.
I think it is only display problem. Becoz i hear the boot screen sound. If i buy the spare (Lcd + Touch) on ebay and get it replaced by un-authorised service centre......It might cost less than 7000/- Sugest me... please...........
Click to expand...
Click to collapse
hi ... hope your prob is solved .. if not try this ..:
1) try to connect the phone to a computer after switching onn .. and if it recogonises the phone then its only display .... else its a board problem ...+

solution for broken screen (touch and display both)
vaibhav.saini10 said:
dineshk_007 said:
My turbo fell down and the touch is broken ... The entire touch screen is not working ... Including the 3 capacitative buttons ...
I want to know y cant we replace the digitizer alone and not the entire display as the display is working jus fine ....
Also is there any co other than mmx which makes or imports the accessories ... As the service center guys are demanding about 7500 + labourcharges + taxes ....
Same problem with me suggest me what to do please
Click to expand...
Click to collapse
The best solution is, You can try for display combo panel in Raisar Plaza, Jaipur.....here you can brought it in just 1800/- and it's work perfectly guys....i also used this and it work nice.....so you can try this....
Click to expand...
Click to collapse

pushpendrapoonia said:
vaibhav.saini10 said:
The best solution is, You can try for display combo panel in Raisar Plaza, Jaipur.....here you can brought it in just 1800/- and it's work perfectly guys....i also used this and it work nice.....so you can try this....
Click to expand...
Click to collapse
is fitment good?...coz at first under warranty time my display(A250) created problem and was repaired free of cost but fitment was pathetic BY AUTHORIZED SERVICE CENTER:cyclops: can u believe it and it was repaired after a wait of bloody 30 days with lots of mailing to MMX.
well after few days my phone fell on road :crying: and got 5 hairline on screen yet it's touch is working..that's not all one day accidentally water drops fall on it. with rapid action a switch it off and after an hour switch it on but it was flashing and rebooting all the time and I had the idea that it would cost me not less then 7-10 k. so i put this A250 in Almira as a signature of my irresponsible attitude. After wait of long 5-6 months my frustration reached on cloud 9 and I took that phone and went to my close by local mobile repairer . his said will check and let me know about it on next day...on next day when i went there he said check your phone and it was working though screen was having those hair line creak & he said ..200 hundred Rs. I was so happy.. local mobile guys Rocks and Auth.service Center suckz.
Click to expand...
Click to collapse

Guys,
Need your suggestions on this please.I have my Micromax canvas turbo A250 and it was working good suddenly i feel that the 3 capacitve touch buttons below(Options, home and Back buttons) are lagging and eventually these 3 capacitive buttons aren't working now. Touch works very well on Rest all areas of screen and I'm able to navigate through App's.
Kindly suggest me if do a root will this prob resolve else also guide me if i should reach Micromax SC(sure they will charge high and I need to handover my phone for a month).Awaiting for your response guys. Thanks!

K20 Pro touch screen digitizer hyper-sensitive

I moved to the K20 Pro from my old workhorse OnePlus 3T. I have received the phone with a defective digitizer. It is extremely sensitive, and many times taps are registered as swipes. Many times touches are innaccurate. I bought it in India from a site called Flipkart, and they have refused replacement, so I am stuck with it.
I bought this phone instead of OnePlus 7 because it had a headphone jack. But this phone has been a real heartbreak for me. I cannot take the phone to a service center because I cannot prove the problem. This is something you notice only by using for a long time.
I hope a future software update would fix this issue to some extent. I am never buying a Xiaomi again.
If you guys have any suggestions or solutions, please let me know.

Why did Flipkart refuse a return?, That's not acceptable, you need to bang their doors or go to a nearby xioami centre
Sent from my Redmi K20 Pro using Tapatalk

GauharJK said:
I moved to the K20 Pro from my old workhorse OnePlus 3T. I have received the phone with a defective digitizer. It is extremely sensitive, and many times taps are registered as swipes. Many times touches are innaccurate. I bought it in India from a site called Flipkart, and they have refused replacement, so I am stuck with it.
I bought this phone instead of OnePlus 7 because it had a headphone jack. But this phone has been a real heartbreak for me. I cannot take the phone to a service center because I cannot prove the problem. This is something you notice only by using for a long time.
I hope a future software update would fix this issue to some extent. I am never buying a Xiaomi again.
If you guys have any suggestions or solutions, please let me know.
Click to expand...
Click to collapse
even you bought a oneplus 7 with this defect , i doubt they will change it as well , what third party app you used btw ?

Aimara said:
even you bought a oneplus 7 with this defect , i doubt they will change it as well , what third party app you used btw ?
Click to expand...
Click to collapse
No third party app. To verify touch screen problem, went to builtin CIT by tapping on Kernel Info in the about screen. Then, to Additional Tools >> Touch sensor. Randomly, taps show up as lines.
Browsing websites or reddit is a pain, as taps become swipes randomly. It does not happen consistently, but often enough that it is a big pain.

GauharJK said:
No third party app. To verify touch screen problem, went to builtin CIT by tapping on Kernel Info in the about screen. Then, to Additional Tools >> Touch sensor. Randomly, taps show up as lines.
Browsing websites or reddit is a pain, as taps become swipes randomly. It does not happen consistently, but often enough that it is a big pain.
Click to expand...
Click to collapse
i know about cit as well , if its the built in app for techs then its legit proof, think you should bring it down to service center to claim warranty ? unless its a china set ?

Aimara said:
i know about cit as well , if its the built in app for techs then its legit proof, think you should bring it down to service center to claim warranty ? unless its a china set ?
Click to expand...
Click to collapse
It is an India unit under warranty. But I am afraid I won't be able to demonstrate the problem. It is not visible easily unless you use the phone for a long time. It is not reproducible.

GauharJK said:
It is an India unit under warranty. But I am afraid I won't be able to demonstrate the problem. It is not visible easily unless you use the phone for a long time. It is not reproducible.
Click to expand...
Click to collapse
Maybe when unit heats up? Try a couple of pubg gaming . Then test.

Situation update:
I went to About Phone >> System Update, then on "Download latest package". Reinstalled the firmware. The touchscreen problem has been reduced considerably.

your Touch is Fine now??

PHnambawan said:
your Touch is Fine now??
Click to expand...
Click to collapse
It's still bad. Better than before. But not satisfactory.

Lol, all are so noobs in here. Just change your goddam cover. I had the same problem, its due to multitouch issue arising with thin bezels and amoled screen. My problem is completely solved now, even in the factory test. Good luck.

sahilb8994 said:
Lol, all are so noobs in here. Just change your goddam cover. I had the same problem, its due to multitouch issue arising with thin bezels and amoled screen. My problem is completely solved now, even in the factory test. Good luck.
Click to expand...
Click to collapse
Lol, we have an arrogant expert who somehow knows the guy with a display problem has a heavy rugged cover in use.
Sent from my Redmi K20 Pro using Tapatalk

ishaqtkr said:
Lol, we have an arrogant expert who somehow knows the guy with a display problem has a heavy rugged cover in use.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Just was being silly, I had the same problem, got solved, and I have been through the same thing so I can relate.
Btw am still facing the 27W fiasco and screen protector problems. Any leads there?

I have to use apps like Touchscreen Calibration from the play store to make the phone usable. Don't know how this app works, but accuracy improves temporarily.
My next phone will be a OnePlus. I am not coming back to Xiaomi again. MIUI is garbage.

sahilb8994 said:
Just was being silly, I had the same problem, got solved, and I have been through the same thing so I can relate.
Btw am still facing the 27W fiasco and screen protector problems. Any leads there?
Click to expand...
Click to collapse
My problem is not just the edges. Its that taps are registered as swipes. You click on a Reddit upvote, the screen just scrolls. You click on a youtube link, the screen scrolls instead of clicking. But it is very random, happens once in a while.
What is your screen protector issue? Fingerprint sensor doesn't work with a screen protector? I had that problem too, had to throw away a new screen protector on day one. But maybe a better quality screen protector would solve the problem. Not tested yet.

GauharJK said:
My problem is not just the edges. Its that taps are registered as swipes. You click on a Reddit upvote, the screen just scrolls. You click on a youtube link, the screen scrolls instead of clicking. But it is very random, happens once in a while.
What is your screen protector issue? Fingerprint sensor doesn't work with a screen protector? I had that problem too, had to throw away a new screen protector on day one. But maybe a better quality screen protector would solve the problem. Not tested yet.
Click to expand...
Click to collapse
That sometimes I touch the side and screen at same time due to screen to body ratio and it registers a swipe. I had to change my unconscious habits of holding the phone

Mine touch senstivity is fine but sometimes the swipes don't get registered properly. Can anyone help me with it?

I am late but if others are looking for answer then Pixel Experience is the answer. It solved all my senstivity issues and my swipes are getting registered correctly. Thanks to the one who suggested me to switch to PE

[QUOareTE="aliasraii, post: 83939863, member: 11241619"]
I am t ib others are looking for answer then Pixel Experience is the answer. It solved all my senstivity issues and my swipes are getting registered correctly. Thanks to the one who suggested me to switch to PE
[/QUOTE]
Mine problem is same when I play pubg the touch stops working again and again during the game
And touches are automatically registered