Hello
I am wondering if its possible (and if so, if it works!) to flash a generic firmware on a Bell branded device (customization number 6616).
Thanks!
its possible to put a unbranded rom on a carrier branded xperia phone , without root i think it gets a little messy but it is possible... with root it should be easier
I'm looking for a workable reverse solution. I have an unlockable 6603. Can I flash 6606/6616 radio baseband and get LTE coverage on T-Mobile or AT&T when in the US?
Dead Cookies leave no trails...
Hi there,
I am looking to flash 14.4.A.0.157 on my stock (not rooted, stock everything) Rogers C6906, but the only available option right now is the US Generic FTF from the FTF megathread. Now, I'm sure this will flash successfully since the hardware is the same, but will this affect my ability to receive OTA updates from Rogers? Lollipop is due in a few months and I still want to be able to get that.
Basically, what are the risks (if any) of flashing this generic FTF on my Canadian C6906, and can I revert back to the stock Rogers firmware if needed?
Well i have a Note 9 128gb T-mobile unlocked N960U that is carrier unlocked
Is it possible to reflash it with clean firmware from samsung for n960u so i can get rid of The T-mobile logo every time i start the mobile ?
i don't want to try to root i know it's not possible just want original firmware if it works hope someone can answer
LennartL said:
Well i have a Note 9 128gb T-mobile unlocked N960U that is carrier unlocked
Is it possible to reflash it with clean firmware from samsung for n960u so i can get rid of The T-mobile logo every time i start the mobile ?
i don't want to try to root i know it's not possible just want original firmware if it works hope someone can answer
Click to expand...
Click to collapse
You can flash it using modded or patched ODIN to the U1 non-carrier firmware to get rid of the T-Mobile boot animation. It will also remove the T-Mobile video calling dialer though but WiFi Calling will still work.
What he said^^^ flash the U1 firmware. Note your device will be wiped.
Sent from my SM-N960F using Tapatalk
Well that doesn't matter to me. Have never used it yet so it doesn't matter if I wipe it. But will I get regular updates if I flash it with u1 firmware ?
And which firmware should I select it exists a few on this page or do I need to take the tmb one for T-Mobile but I'm not using T-Mobile and will probably never do
Here is the page samsung-updates.com/device/?id=SM-N960U1
LennartL said:
Well that doesn't matter to me. Have never used it yet so it doesn't matter if I wipe it. But will I get regular updates if I flash it with u1 firmware ?
And which firmware should I select it exists a few on this page or do I need to take the tmb one for T-Mobile but I'm not using T-Mobile and will probably never do
Here is the page samsung-updates.com/device/?id=SM-N960U1
Click to expand...
Click to collapse
Do not use the one labeled TMB U1. That firmware isn't official and could potentially break OTA's. You want to use the U1 XAA with the same version or newer bootloader than what your device currently has. The the first character of the last five characters of the build number contains your bootloader version. I don't believe the Note 9 has a v2 bootloader yet, but I have only really followed ATT U firmware, U1 firmware, and TMB U firmware. When you flash, do not use the HOME_CSC! remember your device will be wiped and factor reset so back up what you want before starting.
I'm running the TMB U1 firmware. No bloat or boot screens and I get OTAs around the same time as the U t mobile devices. I honestly dont see a real difference from the XAA u1 vs the TMB U1 firmware to be honest
Well that's it's not a problem haven't started to use the device yet. But it's not any risk that I'm brick my phone when flashing with u1 firmware.
One thing I noticed it exists unbranded firmware what I can see on Samsung's page for n960U can I not use that firmware ?
But I should not flash home_csc ? I'm guessing that contains special files for u1 ?
LennartL said:
Well that's it's not a problem haven't started to use the device yet. But it's not any risk that I'm brick my phone when flashing with u1 firmware.
One thing I noticed it exists unbranded firmware what I can see on Samsung's page for n960U can I not use that firmware ?
But I should not flash home_csc ? I'm guessing that contains special files for u1 ?
Click to expand...
Click to collapse
The non-branded firmware is the U1. The reason the modded or patched ODIN is needed is to skip the check that you are flashing the same carrier firmware. The hardware for the US and Canadian models are exactly the same. The firmware on Sansung's page isn't meant for flashing in ODIN.
Although I have only seen one user experience issues with the TMB U1, which for some reason, gave him a modded software warning when they tried to check for updates. I would stick to using the actual non-carrier specific firmware, which has T-Mobile's WiFi Calling and still has band 71 enabled.
ok so the SM-N960U is carrier branded and the SM-N960U version ubranded i thought it was some more technical difference between the different models.
Well the phone i have is new just carrierd unlocked but it's coming from t-mobile but i'm not going to use it in usa right now. So unless i need to have t-mobile's software i gladly skip it and use unbranded and that is the "U1 XAA" i need to use ?
LennartL said:
ok so the SM-N960U is carrier branded and the SM-N960U version ubranded i thought it was some more technical difference between the different models.
Well the phone i have is new just carrierd unlocked but it's coming from t-mobile but i'm not going to use it in usa right now. So unless i need to have t-mobile's software i gladly skip it and use unbranded and that is the "U1 XAA" i need to use ?
Click to expand...
Click to collapse
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
jcsww said:
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
Click to expand...
Click to collapse
Ok so with other words i can use the unbranded XAA firmware and keep OTA now. But if i ever want to use T-mobile or AT&T further on i just install corresponding firmware for that carrier right ?
LennartL said:
Ok so with other words i can use the unbranded XAA firmware and keep OTA now. But if i ever want to use T-mobile or AT&T further on i just install corresponding firmware for that carrier right ?
Click to expand...
Click to collapse
That's correct! The U1 non-carrier firmware is like a stepping stone, If you want to move from one U firmware to one from a different carrier, you need to flash to U1 first and always make sure you never use the HOME_CSC. The HOME_CSC doesn't wipe the device, which can cause a number of issues when converting. Being on the U1 though, makes it very easy to go back to any U firmware because you are already at the point where you could just straight flash to any U or W firmware as long as the bootloader version is the same or newer than what your device has at that time.
ok thanks for all advice
just to be curious because i don't know but wish to learn. Why should u never flash hone_csc and what does that file do?
LennartL said:
ok thanks for all advice
just to be curious because i don't know but wish to learn. Why should u never flash hone_csc and what does that file do?
Click to expand...
Click to collapse
The HOME_CSC prevents wiping while flashing. If you skip the wiping part, you risk having no data, no potential cellular connectivity, no different unlocked bands for the firmware you are flashing to, etc. You pretty much put yourself in a position where you have to flash again, but actually use the other CSC to ensure your device works properly.
Any unlocked USA note 9s willing to upload there modem files somewhere wanna try and make a sim unlock
Help on Flashing Tmobile firmware on Unlocked Note 9
jcsww said:
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
Click to expand...
Click to collapse
Hello all. I am new to this community. I have read several of the posts that mention that the US Snapdragon variant of the Note 9 cannot be flashed with TWRP or custom roms. However I see that based on this post regarding T-Mobile that the U1/ublocked variant can be flashed with any of the other U variants as long as the bootloader is the same. Does this mean that I can flash the T-Mobile firmware on my unlocked note 9? If so can anybody guide me on how to do this? I am trying to go back to having T-Mobile's built in multiline and voicemail functionality which I lost after going from the T-Mobile branded Note 8 to the unlocked Note 9. Thanks!
lguti46 said:
Hello all. I am new to this community. I have read several of the posts that mention that the US Snapdragon variant of the Note 9 cannot be flashed with TWRP or custom roms. However I see that based on this post regarding T-Mobile that the U1/ublocked variant can be flashed with any of the other U variants as long as the bootloader is the same. Does this mean that I can flash the T-Mobile firmware on my unlocked note 9? If so can anybody guide me on how to do this? I am trying to go back to having T-Mobile's built in multiline and voicemail functionality which I lost after going from the T-Mobile branded Note 8 to the unlocked Note 9. Thanks!
Click to expand...
Click to collapse
Yes you can. Use ODIN to flash the T-Mobile firmware. It's that simple. You don't need an unlocked bootloader or root. No it won't trigger Knox.
If you need detailed instructions, they have been posted in some of the firmware threads here, o you can go to the Note 8 forums and read through the carrier switching thread. Just follow the steps for flashing carrier firmware. The steps are all the same, you just make sure you're using the right firmware for your device.
Thank you so much! I was able to successfully flash to T-Mobile using the forum threads.
Hi there again i have Little bit trouble to locate the exat firm i need. The baseband my phone is using seems to be N960USQS1ARH6 i do understand i should use xaa but i dont find any baseband N960USQS1ARH6 xaa im litte bit lost can someone help please ?
LennartL said:
Hi there again i have Little bit trouble to locate the exat firm i need. The baseband my phone is using seems to be N960USQS1ARH6 i do understand i should use xaa but i dont find any baseband N960USQS1ARH6 xaa im litte bit lost can someone help please ?
Click to expand...
Click to collapse
That's because U1 XAA is on ARJ9. There won't be a U1 Firmware with an ARH6 build number.
Please excuse any mistakes I make as this was my first time flashing firmware. So anyway, I have a Verizon S10. I got tired of Verizon’s bloat and all the missing stock features so I flashed the Unlocked Firmware from Sammobile. As I had no prior experience, I did research and came to download the latest U1 firmware with the XAA CSC. I know there’s a U1 version with the Verizon CSC, but I decided to use the XAA version because I knew it was universal. Now I could be totally wrong on this, but isn’t at least one of the three CSCs supposed to be XAA? All mine are still VZW, just like it was on the original carrier fw. I even tried taking the Sim out and reflashing, but no luck. The phone is still locked to Verizon, could that be why? The problem is, can I still get OTA updates? How can I stay on unlocked firmware and get them? Did I mess up and should’ve flashed the VZW U1 fw? Is this fw all vzw cscs too and I just messed up somewhere else? I have the pda of the xaa version with the csc of the vzw version. I don’t know what to do. I would’ve loved to install the one ui beta now that I’m in unlocked fw, but I can’t because my active csc is version, who blocked it
cggamer1 said:
Please excuse any mistakes I make as this was my first time flashing firmware. So anyway, I have a Verizon S10. I got tired of Verizon’s bloat and all the missing stock features so I flashed the Unlocked Firmware from Sammobile. As I had no prior experience, I did research and came to download the latest U1 firmware with the XAA CSC. I know there’s a U1 version with the Verizon CSC, but I decided to use the XAA version because I knew it was universal. Now I could be totally wrong on this, but isn’t at least one of the three CSCs supposed to be XAA? All mine are still VZW, just like it was on the original carrier fw. I even tried taking the Sim out and reflashing, but no luck. The phone is still locked to Verizon, could that be why? The problem is, can I still get OTA updates? How can I stay on unlocked firmware and get them? Did I mess up and should’ve flashed the VZW U1 fw? Is this fw all vzw cscs too and I just messed up somewhere else? I have the pda of the xaa version with the csc of the vzw version. I don’t know what to do. I would’ve loved to install the one ui beta now that I’m in unlocked fw, but I can’t because my active csc is version, who blocked it
Click to expand...
Click to collapse
Some answers to your questions:
1. I don't know, it should flash a data partition that's for the unlocked firmware. I remember reading that somewhere here in the forums.
2. I think Verizon phones are more locked than the others, but I could be wrong.
3. You can get the OTA updates on the unlocked firmware, you just have to have a SIM inserted.
4. You may have, do a factory reset in recovery and try flashing this with that special version of ODIN:
https://www.androidfilehost.com/?fid=1899786940962609128
5. U and U1 firmware are different, sort of. U is carrier and U1 is unlocked.
How can this be done? I'd like the stock UK one (BTU service provider I believe?) as currently it's showing as VOD/VOD EUX etc.
Will my data be wiped? Is it really worth changing and going through the hassle? I've always had stock firmwares either out the box or flashed on Odin by myself but this time it didn't remove the carrier stuff.
I did initially flash the latest stock BTU firmware (all 4 files including CSC not home CSC), yet was still met with the carrier apps and the service provider info says VOD, I'm on Three the phone is unlocked but from Vodafone
uk786 said:
How can this be done? I'd like the stock UK one (BTU service provider I believe?) as currently it's showing as VOD/VOD EUX etc.
Will my data be wiped? Is it really worth changing and going through the hassle? I've always had stock firmwares either out the box or flashed on Odin by myself but this time it didn't remove the carrier stuff.
I did initially flash the latest stock BTU firmware (all 4 files including CSC not home CSC), yet was still met with the carrier apps and the service provider info says VOD, I'm on Three the phone is unlocked but from Vodafone
Click to expand...
Click to collapse
csc detect from SIM CARD .